Development and Testing Tools¶

Tox¶

tox is a popular package that is used by a large number of Python projects as the standard entry point for testing and linting.

Sage includes tox as a standard package and uses it for three purposes:

For portability testing of the Sage distribution, as we explain in Testing on Multiple Platforms. This is configured in the file SAGE_ROOT/tox.ini.
For testing modularized distributions of the Sage library. This is configured in tox.ini files in subdirectories of SAGE_ROOT/pkgs/, such as SAGE_ROOT/pkgs/sagemath-standard/tox.ini. Each distribution’s configuration defines tox environments for testing the distribution with different Python versions and different ways how the dependencies are provided. We explain this in Packaging the Sage Library for Distribution.
As an entry point for testing and linting of the Sage library, as we describe below. This is configured in the file SAGE_ROOT/src/tox.ini.

The tox configuration SAGE_ROOT/src/tox.ini can be invoked by using the command ./sage --tox. (If tox is available in your system installation, you can just type tox instead.)

This configuration provides an entry point for various testing/linting methods, known as “tox environments”. We can type ./sage --advanced to see what is available:

$ ./sage --advanced
SageMath version 9.2
...
Testing files:
...
--tox [options] <files|dirs> -- general entry point for testing
                                and linting of the Sage library
   -e <envlist>     -- run specific test environments; default:
                       doctest,coverage,startuptime,pycodestyle-minimal,relint,codespell,rst,ruff-minimal
      doctest                -- run the Sage doctester
                                (same as "sage -t")
      coverage               -- give information about doctest coverage of files
                                (same as "sage --coverage[all]")
      startuptime            -- display how long each component of Sage takes to start up
                                (same as "sage --startuptime")
      pycodestyle-minimal    -- check against Sage's minimal style conventions
      relint                 -- check whether some forbidden patterns appear
      codespell              -- check for misspelled words in source code
      rst                    -- validate Python docstrings markup as reStructuredText
      ruff-minimal           -- check against Sage's minimal style conventions
      coverage.py            -- run the Sage doctester with Coverage.py
      coverage.py-html       -- run the Sage doctester with Coverage.py, generate HTML report
      pyright                -- run the static typing checker pyright
      pycodestyle            -- check against the Python style conventions of PEP8
      cython-lint            -- check Cython files for code style
      ruff                   -- check against Python style conventions
   -p auto          -- run test environments in parallel
   --help           -- show tox help

Doctest¶

The command ./sage -tox -e doctest runs the Sage doctester. This is equivalent to using the command ./sage -t; see Running Sage’s Doctests.

Note

doctest is a special tox environment that requires that Sage has been built already. A virtual environment is created by tox, but Sage is invoked in the normal Sage environment.

Doctest with Coverage.py¶

The command ./sage -tox -e coverage.py runs the Sage doctester (Running Sage’s Doctests) in the normal Sage environment, but under the control of Coverage.py for code coverage analysis.

If invoked as ./sage -tox -e coverage.py-html, additionally a detailed HTML report is generated.

Configuration: [coverage:run] block in SAGE_ROOT/src/tox.ini

Documentation: https://coverage.readthedocs.io

Note

coverage.py is a special tox environment that requires that Sage has been built already. A virtual environment is created by tox, but the coverage package is installed into the normal Sage environment, and Sage is invoked from there.

Coverage¶

The command ./sage -tox -e coverage checks that each function has at least one doctest (typically in an EXAMPLES or TESTS block, see The docstring of a function: content).

Without additional arguments, this command is equivalent to using the command ./sage --coverageall and gives a short report with a one-line summary for each module of the Sage library.

If invoked with arguments, for example ./sage -tox -e coverage -- src/sage/geometry src/sage/combinat/tableau.py, it is equivalent to using the command ./sage --coverage, which includes details on the modules in the given files or directories.

Note

coverage is a special tox environment that requires that Sage has been built already. A virtual environment is created by tox, but Sage is invoked in the normal Sage environment.

Startuptime¶

The command ./sage -tox -e startuptime measures the time for loading each module that is imported during the start up phase of Sage. It is equivalent to using the command ./sage --startuptime.

Without additional arguments, the command gives a short report that lists the modules with the longest contributions to the overall startup time, sorted by time.

If invoked with arguments, for example sage -tox -e startuptime -- sage.rings src/sage/geometry/polyhedron, it provides details on the given modules, packages, source files, or directories.

Note

startuptime is a special tox environment that requires that Sage has been built already. A virtual environment is created by tox, but Sage is invoked in the normal Sage environment.

Pycodestyle¶

Pycodestyle (formerly known as pep8) checks Python code against the style conventions of PEP 8. Tox automatically installs pycodestyle in a separate virtual environment on the first use.

Sage defines two configurations for pycodestyle. The command ./sage -tox -e pycodestyle-minimal uses pycodestyle in a minimal configuration. As of Sage 9.5, the entire Sage library conforms to this configuration:

$ ./sage -tox -e pycodestyle-minimal -- src/sage/
pycodestyle-minimal installed: pycodestyle==2.8.0
pycodestyle-minimal run-test-pre: PYTHONHASHSEED='28778046'
pycodestyle-minimal run-test: commands[0] | pycodestyle --select E401,E70,W605,E711,E712,E721 sage
___________ summary ____________
  pycodestyle-minimal: commands succeeded
  congratulations :)

When preparing a branch for a Sage ticket, developers should verify that ./sage -tox -e pycodestyle-minimal passes.

The second configuration is used with the command ./sage -tox -e pycodestyle and runs a more thorough check:

$ ./sage -tox -e pycodestyle -- src/sage/quadratic_forms/quadratic_form.py
pycodestyle installed: pycodestyle==2.8.0
pycodestyle run-test-pre: PYTHONHASHSEED='2520226550'
pycodestyle run-test: commands[0] | pycodestyle sage/quadratic_forms/quadratic_form.py
sage/quadratic_forms/quadratic_form.py:135:9: E225 missing whitespace around operator
sage/quadratic_forms/quadratic_form.py:163:64: E225 missing whitespace around operator
sage/quadratic_forms/quadratic_form.py:165:52: E225 missing whitespace around operator
sage/quadratic_forms/quadratic_form.py:173:42: E228 missing whitespace around modulo operator
...
sage/quadratic_forms/quadratic_form.py:1620:9: E266 too many leading '#' for block comment
sage/quadratic_forms/quadratic_form.py:1621:9: E266 too many leading '#' for block comment
25      E111 indentation is not a multiple of 4
2       E117 over-indented
129     E127 continuation line over-indented for visual indent
1       E128 continuation line under-indented for visual indent
4       E201 whitespace after '['
4       E202 whitespace before ']'
2       E222 multiple spaces after operator
7       E225 missing whitespace around operator
1       E228 missing whitespace around modulo operator
25      E231 missing whitespace after ','
1       E262 inline comment should start with '# '
3       E265 block comment should start with '# '
62      E266 too many leading '#' for block comment
2       E272 multiple spaces before keyword
2       E301 expected 1 blank line, found 0
17      E303 too many blank lines (2)
ERROR: InvocationError for command .../pycodestyle sage/quadratic_forms/quadratic_form.py (exited with code 1)
___________ summary ____________
ERROR:   pycodestyle: commands failed

When preparing a branch for a PR that adds new code, developers should verify that ./sage -tox -e pycodestyle does not issue warnings for the added code. This will avoid later cleanup PRs as the Sage codebase is moving toward full PEP 8 compliance.

On the other hand, it is usually not advisable to mix coding-style fixes with productive changes on the same PR because this would makes it harder for reviewers to evaluate the changes.

By passing the options --count -qq we can reduce the output to only show the number of style violation warnings. This can be helpful for planning work on coding-style clean-up PRs that focus on one or a few related issues:

$ ./sage -tox -e pycodestyle -- --count -qq src/sage
pycodestyle installed: pycodestyle==2.8.0
pycodestyle run-test-pre: PYTHONHASHSEED='3166223974'
pycodestyle run-test: commands[0] | pycodestyle --count -qq sage
557     E111 indentation is not a multiple of 4
1       E112 expected an indented block
194     E114 indentation is not a multiple of 4 (comment)
...
7       E743 ambiguous function definition 'l'
335     W291 trailing whitespace
4       W292 no newline at end of file
229     W293 blank line contains whitespace
459     W391 blank line at end of file
97797
ERROR: InvocationError for command .../pycodestyle --count -qq sage (exited with code 1)
___________ summary ____________
ERROR:   pycodestyle: commands failed

Installation: (for manual use:) pip install -U pycodestyle --user

Usage:

With tox: See above.
Manual: Run pycodestyle path/to/the/file.py.
VS Code: The minimal version of pycodestyle is activated by default in SAGE_ROOT/.vscode/settings.json (the corresponding setting is "python.linting.pycodestyleEnabled": true). Note that the settings.json file is not ignored by Git so be aware to keep it in sync with the Sage repo on GitHub. For further details, see the official VS Code documentation.

Configuration: [pycodestyle] block in SAGE_ROOT/src/tox.ini

Documentation: https://pycodestyle.pycqa.org/en/latest/index.html

Cython-lint¶

Cython-lint checks Cython source files for coding style.

Ruff¶

Ruff is a powerful and fast linter for Python code, written in Rust.

It comes with a large choice of possible checks, and has the capacity to fix some of the warnings it emits.

Sage defines two configurations for ruff. The command ./sage -tox -e ruff-minimal uses ruff in a minimal configuration. As of Sage 10.3, the entire Sage library conforms to this configuration. When preparing a Sage PR, developers should verify that ./sage -tox -e ruff-minimal passes.

The second configuration is used with the command ./sage -tox -e ruff and runs a more thorough check. When preparing a PR that adds new code, developers should verify that ./sage -tox -e ruff does not issue warnings for the added code. This will avoid later cleanup PRs as the Sage codebase is moving toward full PEP 8 compliance.

On the other hand, it is usually not advisable to mix coding-style fixes with productive changes on the same PR because this would makes it harder for reviewers to evaluate the changes.

Relint¶

Relint checks all source files for forbidden text patterns specified by regular expressions.

Our configuration of relint flags some outdated Python constructions, plain TeX commands when equivalent LaTeX commands are available, common mistakes in documentation markup, and modularization anti-patterns.

Configuration: SAGE_ROOT/src/.relint.yml

Documentation: https://pypi.org/project/relint/

Codespell¶

Codespell uses a dictionary to check for misspelled words in source code.

Sage defines a configuration for codespell:

$ ./sage -tox -e codespell -- src/sage/homology/
codespell installed: codespell==2.1.0
codespell run-test-pre: PYTHONHASHSEED='1285169064'
codespell run-test: commands[0] | codespell '--skip=*.png,*.jpg,*.JPG,*.inv,*.dia,*.pdf,*.ico,*#*,*~*,*.bak,*.orig,*.log,*.sobj,*.tar,*.gz,*.pyc,*.o,*.sws,*.so,*.a,.DS_Store' --skip=doc/ca,doc/de,doc/es,doc/hu,doc/ja,doc/ru,doc/fr,doc/it,doc/pt,doc/tr --skip=src/doc/ca,src/doc/de,src/doc/es,src/doc/hu,src/doc/ja,src/doc/ru,src/doc/fr,src/doc/it,src/doc/pt,src/doc/tr '--skip=.git,.tox,worktree*,dist,upstream,logs,local,cythonized,scripts-3,autom4te.cache,tmp,lib.*,*.egg-info' --dictionary=- --dictionary=/Users/mkoeppe/s/sage/sage-rebasing/src/.codespell-dictionary.txt --ignore-words=/Users/mkoeppe/s/sage/sage-rebasing/src/.codespell-ignore.txt sage/homology
sage/homology/hochschild_complex.py:271: mone ==> mono, money, none
sage/homology/hochschild_complex.py:277: mone ==> mono, money, none
sage/homology/hochschild_complex.py:280: mone ==> mono, money, none
sage/homology/chain_complex.py:2185: mor ==> more
sage/homology/chain_complex.py:2204: mor ==> more
sage/homology/chain_complex.py:2210: mor ==> more
sage/homology/chain_complex.py:2211: mor ==> more
sage/homology/chain_complex.py:2214: mor ==> more
sage/homology/chain_complex.py:2215: mor ==> more
ERROR: InvocationError for command .../codespell '--skip=*.png,...' --dictionary=- --dictionary=/Users/mkoeppe/s/sage/sage-rebasing/src/.codespell-dictionary.txt --ignore-words=/Users/mkoeppe/s/sage/sage-rebasing/src/.codespell-ignore.txt sage/homology (exited with code 65)
___________ summary ____________
ERROR:   codespell: commands failed

Configuration:

[testenv:codespell] block in SAGE_ROOT/src/tox.ini
SAGE_ROOT/src/.codespell-dictionary.txt and SAGE_ROOT/src/.codespell-ignore.txt

Pytest¶

Pytest is a testing framework. It is included in the Sage distribution as an optional package.

Currently, Sage only makes very limited use of pytest, for testing the package sage.numerical.backends and some modules in sage.manifolds.

Installation:

./sage -i pytest pytest_xdist.

Usage:

Tox, Sage doctester: At the end of ./sage -t (or ./sage --tox -e doctest), Pytest is automatically invoked.
Manual: Run ./sage -pytest path/to/the/test_file.py or ./sage -pytest to run all tests. The additional argument -n can be used to distribute tests across multiple CPUs to speed up test execution. For example, ./sage -pytest -n 4 will run 4 tests in parallel, while ./sage -pytest -n auto will spawn a number of workers processes equal to the number of available CPUs.
VS Code: Install the Python extension and follow the official VS Code documentation.

Configuration: SAGE_ROOT/src/conftest.py

Documentation: https://docs.pytest.org/en/stable/index.html

Pyright¶

Pyright is static type checker.

Installation:

(for manual use:) npm install -g pyright, see documentation for details.

Usage:

Tox: Run ./sage -tox -e pyright path/to/the/file.py
Manual: Run pyright path/to/the/file.py. If you want to check the whole Sage library, you most likely run out of memory with the default settings. You can use the following command to check the whole library:
```
NODE_OPTIONS="--max-old-space-size=8192" pyright
```
VS Code: Install the Pylance extension.

Configuration: SAGE_ROOT/pyrightconfig.json

Documentation: https://github.com/microsoft/pyright#documentation

Pyflakes¶

Pyflakes checks for common coding errors.

Act¶

act is a tool, written in Go, and using Docker, to run GitHub Actions locally; in particular, it speeds up developing Actions. We recommend using gh extension facility to install act.

[alice@localhost sage]$ gh extension install https://github.com/nektos/gh-act

Extra steps needed for configuration of Docker to run Actions locally can be found on act’s GitHub

Here we give a very short sampling of act’s capabilities. If you installed standalone act, it should be invoked as act, not as gh act. After the set up, one can e.g. list all the available linting actions:

[alice@localhost sage]$ gh act -l | grep lint
0      lint-pycodestyle        Code style check with pycodestyle                          Lint                                               lint.yml                push,pull_request
0      lint-relint             Code style check with relint                               Lint                                               lint.yml                push,pull_request
0      lint-rst                Validate docstring markup as RST                           Lint                                               lint.yml                push,pull_request
[alice@localhost sage]$

run a particular action lint-rst

[alice@localhost sage]$ gh act -j lint-rst
...

and so on.

By default, act pulls all the data needed from the next, but it can also cache it, speeding up repeated runs quite a lot. The following repeats running of lint-rst using cached data:

[alice@localhost sage]$ gh act -p false -r -j lint-rst
[Lint/Validate docstring markup as RST]   Start image=catthehacker/ubuntu:act-latest
...
| rst: commands[0] /home/alice/work/software/sage/src> flake8 --select=RST
|   rst: OK (472.60=setup[0.09]+cmd[472.51] seconds)
|   congratulations :) (474.10 seconds)
...
[Lint/Validate docstring markup as RST]     Success - Main Lint using tox -e rst
[Lint/Validate docstring markup as RST]  Run Post Set up Python
[Lint/Validate docstring markup as RST]     docker exec cmd=[node /var/run/act/actions/actions-setup-python@v4/dist/cache-save/index.js] user= workdir=
[Lint/Validate docstring markup as RST]     Success - Post Set up Python
[Lint/Validate docstring markup as RST]   Job succeeded

Here -p false means using already pulled Docker images, and -r means do not remove Docker images after a successful run which used them. This, and many more details, can be found by running gh act -h, as well as reading act’s documentation.