Base class for matrices, part 2¶
For design documentation see matrix/docs.py.
AUTHORS:
William Stein: initial version
Jaap Spies (2006-02-24): added
prod_of_row_sums,permanent,permanental_minor,rook_vectormethodsRobert Bradshaw (2007-06-14): added
subdividemethodJaap Spies (2007-11-14): implemented
_binomial,_chooseauxiliary functionsWilliam Stein (2007-11-18): added
_gram_schmidt_noscalemethodDavid Loeffler (2008-12-05): added
smith_formmethodDavid Loeffler (2009-06-01): added
_echelon_form_PIDmethodSebastian Pancratz (2009-06-25): implemented
adjointandcharpolymethods; fixedadjointreflecting the change that_adjointis now implemented inMatrix; used the division-free algorithm forcharpolyRob Beezer (2009-07-13): added
elementwise_productmethodMiguel Marco (2010-06-19): modified eigenvalues and eigenvectors functions to allow the option
extend=FalseThierry Monteil (2010-10-05): bugfix for Issue #10063, so that the determinant is computed even for rings for which the
is_fieldmethod is not implemented.Rob Beezer (2010-12-13): added
conjugate_transposemethodRob Beezer (2011-02-05): refactored all of the matrix kernel routines; added
extended_echelon_form,right_kernel_matrix,QR,_gram_schmidt_noscale,is_similarmethodsMoritz Minzlaff (2011-03-17): corrected
_echelon_form_PIDmethod for matrices of one row, fixed in Issue #9053Rob Beezer (2011-06-09): added
is_normal,is_diagonalizable,LU,cyclic_subspace,zigzag_form,rational_formmethodsRob Beezer (2012-05-27): added
indefinite_factorization,is_positive_definite,choleskymethodsDarij Grinberg (2013-10-01): added first (slow) pfaffian implementation
Mario Pernici (2014-07-01): modified
rook_vectormethodRob Beezer (2015-05-25): modified
is_similarmethodSamuel Lelièvre (2020-09-18): improved method
LLL_grambased on a patch by William Stein posted at Issue #5178, moving the method from its initial location insage.matrix.integer_matrix_denseMichael Jung (2020-10-02): added Bär-Faddeev-LeVerrier algorithm for the Pfaffian
Moritz Firsching(2020-10-05): added
quantum_determinantDima Pasechnik (2022-11-08): fixed
echelonizefor inexact matrices
- class sage.matrix.matrix2.Matrix[source]¶
Bases:
MatrixBase class for matrices, part 2.
- C¶
Return the conjugate matrix.
EXAMPLES:
sage: A = matrix(QQbar, [[ -3, 5 - 3*I, 7 - 4*I], # needs sage.rings.number_field ....: [7 + 3*I, -1 + 6*I, 3 + 5*I], ....: [3 + 3*I, -3 + 6*I, 5 + I]]) sage: A.C # needs sage.rings.number_field [ -3 5 + 3*I 7 + 4*I] [ 7 - 3*I -1 - 6*I 3 - 5*I] [ 3 - 3*I -3 - 6*I 5 - 1*I]
>>> from sage.all import * >>> A = matrix(QQbar, [[ -Integer(3), Integer(5) - Integer(3)*I, Integer(7) - Integer(4)*I], # needs sage.rings.number_field ... [Integer(7) + Integer(3)*I, -Integer(1) + Integer(6)*I, Integer(3) + Integer(5)*I], ... [Integer(3) + Integer(3)*I, -Integer(3) + Integer(6)*I, Integer(5) + I]]) >>> A.C # needs sage.rings.number_field [ -3 5 + 3*I 7 + 4*I] [ 7 - 3*I -1 - 6*I 3 - 5*I] [ 3 - 3*I -3 - 6*I 5 - 1*I]
A = matrix(QQbar, [[ -3, 5 - 3*I, 7 - 4*I], # needs sage.rings.number_field [7 + 3*I, -1 + 6*I, 3 + 5*I], [3 + 3*I, -3 + 6*I, 5 + I]]) A.C # needs sage.rings.number_field
- H¶
Return the conjugate-transpose (Hermitian) matrix.
EXAMPLES:
sage: A = matrix(QQbar, [[ -3, 5 - 3*I, 7 - 4*I], # needs sage.rings.number_field ....: [7 + 3*I, -1 + 6*I, 3 + 5*I], ....: [3 + 3*I, -3 + 6*I, 5 + I]]) sage: A.H # needs sage.rings.number_field [ -3 7 - 3*I 3 - 3*I] [ 5 + 3*I -1 - 6*I -3 - 6*I] [ 7 + 4*I 3 - 5*I 5 - 1*I]
>>> from sage.all import * >>> A = matrix(QQbar, [[ -Integer(3), Integer(5) - Integer(3)*I, Integer(7) - Integer(4)*I], # needs sage.rings.number_field ... [Integer(7) + Integer(3)*I, -Integer(1) + Integer(6)*I, Integer(3) + Integer(5)*I], ... [Integer(3) + Integer(3)*I, -Integer(3) + Integer(6)*I, Integer(5) + I]]) >>> A.H # needs sage.rings.number_field [ -3 7 - 3*I 3 - 3*I] [ 5 + 3*I -1 - 6*I -3 - 6*I] [ 7 + 4*I 3 - 5*I 5 - 1*I]
A = matrix(QQbar, [[ -3, 5 - 3*I, 7 - 4*I], # needs sage.rings.number_field [7 + 3*I, -1 + 6*I, 3 + 5*I], [3 + 3*I, -3 + 6*I, 5 + I]]) A.H # needs sage.rings.number_field
- LLL_gram(flag=0)[source]¶
Return the LLL transformation matrix for this Gram matrix.
That is, the transformation matrix U over ZZ of determinant 1 that transforms the lattice with this matrix as Gram matrix to a lattice that is LLL-reduced.
Always works when
selfis positive definite, might work in some semidefinite and indefinite cases.INPUT:
self– the Gram matrix of a quadratic form or of a lattice equipped with a bilinear formflag– an optional flag passed toqflllgramAccording to pari:qflllgram’s documentation the options are:0– (default), assume thatselfhas either exact (integral or rational) or real floating point entries. The matrix is rescaled, converted to integers and the behavior is then as inflag=1.1– assume that G is integral. Computations involving Gram-Schmidt vectors are approximate, with precision varying as needed.
OUTPUT:
A dense matrix
Uover the integers with determinant 1 such thatU.T * M * Uis LLL-reduced.ALGORITHM:
Calls PARI’s pari:qflllgram.
EXAMPLES:
Create a Gram matrix and LLL-reduce it:
sage: M = Matrix(ZZ, 2, 2, [5, 3, 3, 2]) sage: U = M.LLL_gram() # needs sage.libs.pari sage: MM = U.transpose() * M * U # needs sage.libs.pari sage: M, U, MM # needs sage.libs.pari ( [5 3] [-1 1] [1 0] [3 2], [ 1 -2], [0 1] )
>>> from sage.all import * >>> M = Matrix(ZZ, Integer(2), Integer(2), [Integer(5), Integer(3), Integer(3), Integer(2)]) >>> U = M.LLL_gram() # needs sage.libs.pari >>> MM = U.transpose() * M * U # needs sage.libs.pari >>> M, U, MM # needs sage.libs.pari ( [5 3] [-1 1] [1 0] [3 2], [ 1 -2], [0 1] )
M = Matrix(ZZ, 2, 2, [5, 3, 3, 2]) U = M.LLL_gram() # needs sage.libs.pari MM = U.transpose() * M * U # needs sage.libs.pari M, U, MM # needs sage.libs.pari
For a Gram matrix over RR with a length one first vector and a very short second vector, the LLL-reduced basis is obtained by swapping the two basis vectors (and changing sign to preserve orientation).
sage: M = Matrix(RDF, 2, 2, [1, 0, 0, 1e-5]) sage: M.LLL_gram() # needs sage.libs.pari [ 0 -1] [ 1 0]
>>> from sage.all import * >>> M = Matrix(RDF, Integer(2), Integer(2), [Integer(1), Integer(0), Integer(0), RealNumber('1e-5')]) >>> M.LLL_gram() # needs sage.libs.pari [ 0 -1] [ 1 0]
M = Matrix(RDF, 2, 2, [1, 0, 0, 1e-5]) M.LLL_gram() # needs sage.libs.pari
The algorithm might work for some semidefinite and indefinite forms:
sage: Matrix(ZZ, 2, 2, [2, 6, 6, 3]).LLL_gram() # needs sage.libs.pari [-3 -1] [ 1 0] sage: Matrix(ZZ, 2, 2, [1, 0, 0, -1]).LLL_gram() # needs sage.libs.pari [ 0 -1] [ 1 0]
>>> from sage.all import * >>> Matrix(ZZ, Integer(2), Integer(2), [Integer(2), Integer(6), Integer(6), Integer(3)]).LLL_gram() # needs sage.libs.pari [-3 -1] [ 1 0] >>> Matrix(ZZ, Integer(2), Integer(2), [Integer(1), Integer(0), Integer(0), -Integer(1)]).LLL_gram() # needs sage.libs.pari [ 0 -1] [ 1 0]
Matrix(ZZ, 2, 2, [2, 6, 6, 3]).LLL_gram() # needs sage.libs.pari Matrix(ZZ, 2, 2, [1, 0, 0, -1]).LLL_gram() # needs sage.libs.pari
However, it might fail for others, either raising a
ValueError:sage: Matrix(ZZ, 1, 1, [0]).LLL_gram() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: qflllgram did not return a square matrix, perhaps the matrix is not positive definite sage: Matrix(ZZ, 2, 2, [0, 1, 1, 0]).LLL_gram() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: qflllgram did not return a square matrix, perhaps the matrix is not positive definite
>>> from sage.all import * >>> Matrix(ZZ, Integer(1), Integer(1), [Integer(0)]).LLL_gram() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: qflllgram did not return a square matrix, perhaps the matrix is not positive definite >>> Matrix(ZZ, Integer(2), Integer(2), [Integer(0), Integer(1), Integer(1), Integer(0)]).LLL_gram() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: qflllgram did not return a square matrix, perhaps the matrix is not positive definite
Matrix(ZZ, 1, 1, [0]).LLL_gram() # needs sage.libs.pari Matrix(ZZ, 2, 2, [0, 1, 1, 0]).LLL_gram() # needs sage.libs.pari
or running forever:
sage: Matrix(ZZ, 2, 2, [-5, -1, -1, -5]).LLL_gram() # not tested, needs sage.libs.pari Traceback (most recent call last): ... RuntimeError: infinite loop while calling qflllgram
>>> from sage.all import * >>> Matrix(ZZ, Integer(2), Integer(2), [-Integer(5), -Integer(1), -Integer(1), -Integer(5)]).LLL_gram() # not tested, needs sage.libs.pari Traceback (most recent call last): ... RuntimeError: infinite loop while calling qflllgram
Matrix(ZZ, 2, 2, [-5, -1, -1, -5]).LLL_gram() # not tested, needs sage.libs.pari
Nonreal input leads to a value error:
sage: Matrix(2, 2, [CDF(1, 1), 0, 0, 1]).LLL_gram() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: qflllgram failed, perhaps the matrix is not positive definite
>>> from sage.all import * >>> Matrix(Integer(2), Integer(2), [CDF(Integer(1), Integer(1)), Integer(0), Integer(0), Integer(1)]).LLL_gram() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: qflllgram failed, perhaps the matrix is not positive definite
Matrix(2, 2, [CDF(1, 1), 0, 0, 1]).LLL_gram() # needs sage.libs.pari
- LU(pivot=None, format='plu')[source]¶
Finds a decomposition into a lower-triangular matrix and an upper-triangular matrix.
INPUT:
pivot– pivoting strategy‘auto’ (default) – see if the matrix entries are ordered (i.e. if they have an absolute value method), and if so, use a the partial pivoting strategy. Otherwise, fall back to the nonzero strategy. This is the best choice for general routines that may call this for matrix entries of a variety of types.
'partial'– each column is examined for the element with the largest absolute value and the row containing this element is swapped into place'nonzero'– the first nonzero element in a column is located and the row with this element is used
format– contents of output, see more discussion below about output‘plu’ (default) – a triple; matrices P, L and U such that A = P*L*U
'compact'– a pair; row permutation as a tuple, and the matrices L and U combined into one matrix
OUTPUT:
Suppose that \(A\) is an \(m\times n\) matrix, then an LU decomposition is a lower-triangular \(m\times m\) matrix \(L\) with every diagonal element equal to 1, and an upper-triangular \(m\times n\) matrix, \(U\) such that the product \(LU\), after a permutation of the rows, is then equal to \(A\). For the ‘plu’ format the permutation is returned as an \(m\times m\) permutation matrix \(P\) such that
\[A = PLU\]It is more common to place the permutation matrix just to the left of \(A\). If you desire this version, then use the inverse of \(P\) which is computed most efficiently as its transpose.
If the ‘partial’ pivoting strategy is used, then the non-diagonal entries of \(L\) will be less than or equal to 1 in absolute value. The ‘nonzero’ pivot strategy may be faster, but the growth of data structures for elements of the decomposition might counteract the advantage.
By necessity, returned matrices have a base ring equal to the fraction field of the base ring of the original matrix.
In the ‘compact’ format, the first returned value is a tuple that is a permutation of the rows of \(LU\) that yields \(A\). See the doctest for how you might employ this permutation. Then the matrices \(L\) and \(U\) are merged into one matrix – remove the diagonal of ones in \(L\) and the remaining nonzero entries can replace the entries of \(U\) beneath the diagonal.
The results are cached, only in the compact format, separately for each pivot strategy called. Repeated requests for the ‘plu’ format will require just a small amount of overhead in each call to bust out the compact format to the three matrices. Since only the compact format is cached, the components of the compact format are immutable, while the components of the ‘plu’ format are regenerated, and hence are mutable.
Notice that while \(U\) is similar to row-echelon form and the rows of \(U\) span the row space of \(A\), the rows of \(U\) are not generally linearly independent. Nor are the pivot columns (or rank) immediately obvious. However for rings without specialized echelon form routines, this method is about twice as fast as the generic echelon form routine since it only acts “below the diagonal”, as would be predicted from a theoretical analysis of the algorithms.
Note
This is an exact computation, so limited to exact rings. If you need numerical results, convert the base ring to the field of real double numbers,
RDFor the field of complex double numbers,CDF, which will use a faster routine that is careful about numerical subtleties.ALGORITHM:
“Gaussian Elimination with Partial Pivoting,” Algorithm 21.1 of [TB1997].
EXAMPLES:
Notice the difference in the \(L\) matrix as a result of different pivoting strategies. With partial pivoting, every entry of \(L\) has absolute value 1 or less.
sage: A = matrix(QQ, [[1, -1, 0, 2, 4, 7, -1], ....: [2, -1, 0, 6, 4, 8, -2], ....: [2, 0, 1, 4, 2, 6, 0], ....: [1, 0, -1, 8, -1, -1, -3], ....: [1, 1, 2, -2, -1, 1, 3]]) sage: P, L, U = A.LU(pivot='partial') sage: P [0 0 0 0 1] [1 0 0 0 0] [0 0 0 1 0] [0 0 1 0 0] [0 1 0 0 0] sage: L [ 1 0 0 0 0] [ 1/2 1 0 0 0] [ 1/2 1/3 1 0 0] [ 1 2/3 1/5 1 0] [ 1/2 -1/3 -2/5 0 1] sage: U [ 2 -1 0 6 4 8 -2] [ 0 3/2 2 -5 -3 -3 4] [ 0 0 -5/3 20/3 -2 -4 -10/3] [ 0 0 0 0 2/5 4/5 0] [ 0 0 0 0 1/5 2/5 0] sage: A == P*L*U True sage: P, L, U = A.LU(pivot='nonzero') sage: P [1 0 0 0 0] [0 1 0 0 0] [0 0 1 0 0] [0 0 0 1 0] [0 0 0 0 1] sage: L [ 1 0 0 0 0] [ 2 1 0 0 0] [ 2 2 1 0 0] [ 1 1 -1 1 0] [ 1 2 2 0 1] sage: U [ 1 -1 0 2 4 7 -1] [ 0 1 0 2 -4 -6 0] [ 0 0 1 -4 2 4 2] [ 0 0 0 0 1 2 0] [ 0 0 0 0 -1 -2 0] sage: A == P*L*U True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), -Integer(1), Integer(0), Integer(2), Integer(4), Integer(7), -Integer(1)], ... [Integer(2), -Integer(1), Integer(0), Integer(6), Integer(4), Integer(8), -Integer(2)], ... [Integer(2), Integer(0), Integer(1), Integer(4), Integer(2), Integer(6), Integer(0)], ... [Integer(1), Integer(0), -Integer(1), Integer(8), -Integer(1), -Integer(1), -Integer(3)], ... [Integer(1), Integer(1), Integer(2), -Integer(2), -Integer(1), Integer(1), Integer(3)]]) >>> P, L, U = A.LU(pivot='partial') >>> P [0 0 0 0 1] [1 0 0 0 0] [0 0 0 1 0] [0 0 1 0 0] [0 1 0 0 0] >>> L [ 1 0 0 0 0] [ 1/2 1 0 0 0] [ 1/2 1/3 1 0 0] [ 1 2/3 1/5 1 0] [ 1/2 -1/3 -2/5 0 1] >>> U [ 2 -1 0 6 4 8 -2] [ 0 3/2 2 -5 -3 -3 4] [ 0 0 -5/3 20/3 -2 -4 -10/3] [ 0 0 0 0 2/5 4/5 0] [ 0 0 0 0 1/5 2/5 0] >>> A == P*L*U True >>> P, L, U = A.LU(pivot='nonzero') >>> P [1 0 0 0 0] [0 1 0 0 0] [0 0 1 0 0] [0 0 0 1 0] [0 0 0 0 1] >>> L [ 1 0 0 0 0] [ 2 1 0 0 0] [ 2 2 1 0 0] [ 1 1 -1 1 0] [ 1 2 2 0 1] >>> U [ 1 -1 0 2 4 7 -1] [ 0 1 0 2 -4 -6 0] [ 0 0 1 -4 2 4 2] [ 0 0 0 0 1 2 0] [ 0 0 0 0 -1 -2 0] >>> A == P*L*U True
A = matrix(QQ, [[1, -1, 0, 2, 4, 7, -1], [2, -1, 0, 6, 4, 8, -2], [2, 0, 1, 4, 2, 6, 0], [1, 0, -1, 8, -1, -1, -3], [1, 1, 2, -2, -1, 1, 3]]) P, L, U = A.LU(pivot='partial') P L U A == P*L*U P, L, U = A.LU(pivot='nonzero') P L U A == P*L*UAn example of the compact format.
sage: B = matrix(QQ, [[ 1, 3, 5, 5], ....: [ 1, 4, 7, 8], ....: [-1, -4, -6, -6], ....: [ 0, -2, -5, -8], ....: [-2, -6, -6, -2]]) sage: perm, M = B.LU(format='compact') sage: perm (4, 3, 0, 1, 2) sage: M [ -2 -6 -6 -2] [ 0 -2 -5 -8] [-1/2 0 2 4] [-1/2 -1/2 3/4 0] [ 1/2 1/2 -1/4 0]
>>> from sage.all import * >>> B = matrix(QQ, [[ Integer(1), Integer(3), Integer(5), Integer(5)], ... [ Integer(1), Integer(4), Integer(7), Integer(8)], ... [-Integer(1), -Integer(4), -Integer(6), -Integer(6)], ... [ Integer(0), -Integer(2), -Integer(5), -Integer(8)], ... [-Integer(2), -Integer(6), -Integer(6), -Integer(2)]]) >>> perm, M = B.LU(format='compact') >>> perm (4, 3, 0, 1, 2) >>> M [ -2 -6 -6 -2] [ 0 -2 -5 -8] [-1/2 0 2 4] [-1/2 -1/2 3/4 0] [ 1/2 1/2 -1/4 0]
B = matrix(QQ, [[ 1, 3, 5, 5], [ 1, 4, 7, 8], [-1, -4, -6, -6], [ 0, -2, -5, -8], [-2, -6, -6, -2]]) perm, M = B.LU(format='compact') perm MWe can easily illustrate the relationships between the two formats with a square matrix.
sage: C = matrix(QQ, [[-2, 3, -2, -5], ....: [ 1, -2, 1, 3], ....: [-4, 7, -3, -8], ....: [-3, 8, -1, -5]]) sage: P, L, U = C.LU(format='plu') sage: perm, M = C.LU(format='compact') sage: (L - identity_matrix(4)) + U == M True sage: p = [perm[i]+1 for i in range(len(perm))] sage: PP = Permutation(p).to_matrix() sage: PP == P True
>>> from sage.all import * >>> C = matrix(QQ, [[-Integer(2), Integer(3), -Integer(2), -Integer(5)], ... [ Integer(1), -Integer(2), Integer(1), Integer(3)], ... [-Integer(4), Integer(7), -Integer(3), -Integer(8)], ... [-Integer(3), Integer(8), -Integer(1), -Integer(5)]]) >>> P, L, U = C.LU(format='plu') >>> perm, M = C.LU(format='compact') >>> (L - identity_matrix(Integer(4))) + U == M True >>> p = [perm[i]+Integer(1) for i in range(len(perm))] >>> PP = Permutation(p).to_matrix() >>> PP == P True
C = matrix(QQ, [[-2, 3, -2, -5], [ 1, -2, 1, 3], [-4, 7, -3, -8], [-3, 8, -1, -5]]) P, L, U = C.LU(format='plu') perm, M = C.LU(format='compact') (L - identity_matrix(4)) + U == M p = [perm[i]+1 for i in range(len(perm))] PP = Permutation(p).to_matrix() PP == PFor a nonsingular matrix, and the ‘nonzero’ pivot strategy there is no need to permute rows, so the permutation matrix will be the identity. Furthermore, it can be shown that then the \(L\) and \(U\) matrices are uniquely determined by requiring \(L\) to have ones on the diagonal.
sage: D = matrix(QQ, [[ 1, 0, 2, 0, -2, -1], ....: [ 3, -2, 3, -1, 0, 6], ....: [-4, 2, -3, 1, -1, -8], ....: [-2, 2, -3, 2, 1, 0], ....: [ 0, -1, -1, 0, 2, 5], ....: [-1, 2, -4, -1, 5, -3]]) sage: P, L, U = D.LU(pivot='nonzero') sage: P [1 0 0 0 0 0] [0 1 0 0 0 0] [0 0 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 0] [0 0 0 0 0 1] sage: L [ 1 0 0 0 0 0] [ 3 1 0 0 0 0] [ -4 -1 1 0 0 0] [ -2 -1 -1 1 0 0] [ 0 1/2 1/4 1/2 1 0] [ -1 -1 -5/2 -2 -6 1] sage: U [ 1 0 2 0 -2 -1] [ 0 -2 -3 -1 6 9] [ 0 0 2 0 -3 -3] [ 0 0 0 1 0 4] [ 0 0 0 0 -1/4 -3/4] [ 0 0 0 0 0 1] sage: D == L*U True
>>> from sage.all import * >>> D = matrix(QQ, [[ Integer(1), Integer(0), Integer(2), Integer(0), -Integer(2), -Integer(1)], ... [ Integer(3), -Integer(2), Integer(3), -Integer(1), Integer(0), Integer(6)], ... [-Integer(4), Integer(2), -Integer(3), Integer(1), -Integer(1), -Integer(8)], ... [-Integer(2), Integer(2), -Integer(3), Integer(2), Integer(1), Integer(0)], ... [ Integer(0), -Integer(1), -Integer(1), Integer(0), Integer(2), Integer(5)], ... [-Integer(1), Integer(2), -Integer(4), -Integer(1), Integer(5), -Integer(3)]]) >>> P, L, U = D.LU(pivot='nonzero') >>> P [1 0 0 0 0 0] [0 1 0 0 0 0] [0 0 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 0] [0 0 0 0 0 1] >>> L [ 1 0 0 0 0 0] [ 3 1 0 0 0 0] [ -4 -1 1 0 0 0] [ -2 -1 -1 1 0 0] [ 0 1/2 1/4 1/2 1 0] [ -1 -1 -5/2 -2 -6 1] >>> U [ 1 0 2 0 -2 -1] [ 0 -2 -3 -1 6 9] [ 0 0 2 0 -3 -3] [ 0 0 0 1 0 4] [ 0 0 0 0 -1/4 -3/4] [ 0 0 0 0 0 1] >>> D == L*U True
D = matrix(QQ, [[ 1, 0, 2, 0, -2, -1], [ 3, -2, 3, -1, 0, 6], [-4, 2, -3, 1, -1, -8], [-2, 2, -3, 2, 1, 0], [ 0, -1, -1, 0, 2, 5], [-1, 2, -4, -1, 5, -3]]) P, L, U = D.LU(pivot='nonzero') P L U D == L*UThe base ring of the matrix may be any field, or a ring which has a fraction field implemented in Sage. The ring needs to be exact (there is a numerical LU decomposition for matrices over
RDFandCDF). Matrices returned are over the original field, or the fraction field of the ring. If the field is not ordered (i.e. the absolute value function is not implemented), then the pivot strategy needs to be ‘nonzero’.sage: A = matrix(RealField(100), 3, 3, range(9)) sage: P, L, U = A.LU() Traceback (most recent call last): ... TypeError: base ring of the matrix must be exact, not Real Field with 100 bits of precision sage: A = matrix(Integers(6), 3, 2, range(6)) sage: A.LU() Traceback (most recent call last): ... TypeError: base ring of the matrix needs a field of fractions, not Ring of integers modulo 6 sage: R.<y> = PolynomialRing(QQ, 'y') sage: B = matrix(R, [[y+1, y^2+y], [y^2, y^3]]) sage: P, L, U = B.LU(pivot='partial') Traceback (most recent call last): ... TypeError: cannot take absolute value of matrix entries, try 'pivot=nonzero' sage: P, L, U = B.LU(pivot='nonzero') sage: P [1 0] [0 1] sage: L [ 1 0] [y^2/(y + 1) 1] sage: U [ y + 1 y^2 + y] [ 0 0] sage: L.base_ring() Fraction Field of Univariate Polynomial Ring in y over Rational Field sage: B == P*L*U True sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(5^2) sage: C = matrix(F, [[a + 3, 4*a + 4, 2, 4*a + 2], ....: [3, 2*a + 4, 2*a + 4, 2*a + 1], ....: [3*a + 1, a + 3, 2*a + 4, 4*a + 3], ....: [a, 3, 3*a + 1, a]]) sage: P, L, U = C.LU(pivot='nonzero') sage: P [1 0 0 0] [0 1 0 0] [0 0 1 0] [0 0 0 1] sage: L # needs sage.combinat [ 1 0 0 0] [3*a + 3 1 0 0] [ 2*a 4*a + 2 1 0] [2*a + 3 2 2*a + 4 1] sage: U # needs sage.combinat [ a + 3 4*a + 4 2 4*a + 2] [ 0 a + 1 a + 3 2*a + 4] [ 0 0 1 4*a + 2] [ 0 0 0 0] sage: L.base_ring() # needs sage.combinat Finite Field in a of size 5^2 sage: C == P*L*U # needs sage.combinat True
>>> from sage.all import * >>> A = matrix(RealField(Integer(100)), Integer(3), Integer(3), range(Integer(9))) >>> P, L, U = A.LU() Traceback (most recent call last): ... TypeError: base ring of the matrix must be exact, not Real Field with 100 bits of precision >>> A = matrix(Integers(Integer(6)), Integer(3), Integer(2), range(Integer(6))) >>> A.LU() Traceback (most recent call last): ... TypeError: base ring of the matrix needs a field of fractions, not Ring of integers modulo 6 >>> R = PolynomialRing(QQ, 'y', names=('y',)); (y,) = R._first_ngens(1) >>> B = matrix(R, [[y+Integer(1), y**Integer(2)+y], [y**Integer(2), y**Integer(3)]]) >>> P, L, U = B.LU(pivot='partial') Traceback (most recent call last): ... TypeError: cannot take absolute value of matrix entries, try 'pivot=nonzero' >>> P, L, U = B.LU(pivot='nonzero') >>> P [1 0] [0 1] >>> L [ 1 0] [y^2/(y + 1) 1] >>> U [ y + 1 y^2 + y] [ 0 0] >>> L.base_ring() Fraction Field of Univariate Polynomial Ring in y over Rational Field >>> B == P*L*U True >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(5)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> C = matrix(F, [[a + Integer(3), Integer(4)*a + Integer(4), Integer(2), Integer(4)*a + Integer(2)], ... [Integer(3), Integer(2)*a + Integer(4), Integer(2)*a + Integer(4), Integer(2)*a + Integer(1)], ... [Integer(3)*a + Integer(1), a + Integer(3), Integer(2)*a + Integer(4), Integer(4)*a + Integer(3)], ... [a, Integer(3), Integer(3)*a + Integer(1), a]]) >>> P, L, U = C.LU(pivot='nonzero') >>> P [1 0 0 0] [0 1 0 0] [0 0 1 0] [0 0 0 1] >>> L # needs sage.combinat [ 1 0 0 0] [3*a + 3 1 0 0] [ 2*a 4*a + 2 1 0] [2*a + 3 2 2*a + 4 1] >>> U # needs sage.combinat [ a + 3 4*a + 4 2 4*a + 2] [ 0 a + 1 a + 3 2*a + 4] [ 0 0 1 4*a + 2] [ 0 0 0 0] >>> L.base_ring() # needs sage.combinat Finite Field in a of size 5^2 >>> C == P*L*U # needs sage.combinat True
A = matrix(RealField(100), 3, 3, range(9)) P, L, U = A.LU() A = matrix(Integers(6), 3, 2, range(6)) A.LU() R.<y> = PolynomialRing(QQ, 'y') B = matrix(R, [[y+1, y^2+y], [y^2, y^3]]) P, L, U = B.LU(pivot='partial') P, L, U = B.LU(pivot='nonzero') P L U L.base_ring() B == P*L*U # needs sage.rings.finite_rings F.<a> = FiniteField(5^2) C = matrix(F, [[a + 3, 4*a + 4, 2, 4*a + 2], [3, 2*a + 4, 2*a + 4, 2*a + 1], [3*a + 1, a + 3, 2*a + 4, 4*a + 3], [a, 3, 3*a + 1, a]]) P, L, U = C.LU(pivot='nonzero') P L # needs sage.combinat U # needs sage.combinat L.base_ring() # needs sage.combinat C == P*L*U # needs sage.combinatWith no pivoting strategy given (i.e.
pivot=None) the routine will try to use partial pivoting, but then fall back to the nonzero strategy. For the nonsingular matrix below, we see evidence of pivoting when viewed over the rationals, and no pivoting over the integers mod 29.sage: entries = [3, 20, 11, 7, 16, 28, 5, 15, 21, 23, 22, 18, 8, 23, 15, 2] sage: A = matrix(Integers(29), 4, 4, entries) sage: perm, _ = A.LU(format='compact'); perm (0, 1, 2, 3) sage: B = matrix(QQ, 4, 4, entries) sage: perm, _ = B.LU(format='compact'); perm (2, 0, 1, 3)
>>> from sage.all import * >>> entries = [Integer(3), Integer(20), Integer(11), Integer(7), Integer(16), Integer(28), Integer(5), Integer(15), Integer(21), Integer(23), Integer(22), Integer(18), Integer(8), Integer(23), Integer(15), Integer(2)] >>> A = matrix(Integers(Integer(29)), Integer(4), Integer(4), entries) >>> perm, _ = A.LU(format='compact'); perm (0, 1, 2, 3) >>> B = matrix(QQ, Integer(4), Integer(4), entries) >>> perm, _ = B.LU(format='compact'); perm (2, 0, 1, 3)
entries = [3, 20, 11, 7, 16, 28, 5, 15, 21, 23, 22, 18, 8, 23, 15, 2] A = matrix(Integers(29), 4, 4, entries) perm, _ = A.LU(format='compact'); perm B = matrix(QQ, 4, 4, entries) perm, _ = B.LU(format='compact'); perm
The \(U\) matrix is only guaranteed to be upper-triangular. The rows are not necessarily linearly independent, nor are the pivots columns or rank in evidence.
sage: A = matrix(QQ, [[ 1, -4, 1, 0, -2, 1, 3, 3, 2], ....: [-1, 4, 0, -4, 0, -4, 5, -7, -7], ....: [ 0, 0, 1, -4, -1, -3, 6, -5, -6], ....: [-2, 8, -1, -4, 2, -4, 1, -8, -7], ....: [ 1, -4, 2, -4, -3, 2, 5, 6, 4]]) sage: P, L, U = A.LU() sage: U [ -2 8 -1 -4 2 -4 1 -8 -7] [ 0 0 1/2 -2 -1 -2 9/2 -3 -7/2] [ 0 0 3/2 -6 -2 0 11/2 2 1/2] [ 0 0 0 0 -1/3 -1 5/3 -5/3 -5/3] [ 0 0 0 0 1/3 -3 7/3 -19/3 -19/3] sage: A.rref() [ 1 -4 0 4 0 0 -1 -1 -1] [ 0 0 1 -4 0 0 1 0 -1] [ 0 0 0 0 1 0 -2 -1 -1] [ 0 0 0 0 0 1 -1 2 2] [ 0 0 0 0 0 0 0 0 0] sage: A.pivots() (0, 2, 4, 5)
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(1), -Integer(4), Integer(1), Integer(0), -Integer(2), Integer(1), Integer(3), Integer(3), Integer(2)], ... [-Integer(1), Integer(4), Integer(0), -Integer(4), Integer(0), -Integer(4), Integer(5), -Integer(7), -Integer(7)], ... [ Integer(0), Integer(0), Integer(1), -Integer(4), -Integer(1), -Integer(3), Integer(6), -Integer(5), -Integer(6)], ... [-Integer(2), Integer(8), -Integer(1), -Integer(4), Integer(2), -Integer(4), Integer(1), -Integer(8), -Integer(7)], ... [ Integer(1), -Integer(4), Integer(2), -Integer(4), -Integer(3), Integer(2), Integer(5), Integer(6), Integer(4)]]) >>> P, L, U = A.LU() >>> U [ -2 8 -1 -4 2 -4 1 -8 -7] [ 0 0 1/2 -2 -1 -2 9/2 -3 -7/2] [ 0 0 3/2 -6 -2 0 11/2 2 1/2] [ 0 0 0 0 -1/3 -1 5/3 -5/3 -5/3] [ 0 0 0 0 1/3 -3 7/3 -19/3 -19/3] >>> A.rref() [ 1 -4 0 4 0 0 -1 -1 -1] [ 0 0 1 -4 0 0 1 0 -1] [ 0 0 0 0 1 0 -2 -1 -1] [ 0 0 0 0 0 1 -1 2 2] [ 0 0 0 0 0 0 0 0 0] >>> A.pivots() (0, 2, 4, 5)
A = matrix(QQ, [[ 1, -4, 1, 0, -2, 1, 3, 3, 2], [-1, 4, 0, -4, 0, -4, 5, -7, -7], [ 0, 0, 1, -4, -1, -3, 6, -5, -6], [-2, 8, -1, -4, 2, -4, 1, -8, -7], [ 1, -4, 2, -4, -3, 2, 5, 6, 4]]) P, L, U = A.LU() U A.rref() A.pivots()
- QR(full=True)[source]¶
Return a factorization of
selfas a unitary matrix and an upper-triangular matrix.INPUT:
full– (default:True) ifTruethen the returned matrices have dimensions as described below. IfFalsetheRmatrix has no zero rows and the columns ofQare a basis for the column space ofself.
OUTPUT:
If
selfis an \(m\times n\) matrix andfull=Truethen this method returns a pair of matrices: \(Q\) is an \(m\times m\) unitary matrix (meaning its inverse is its conjugate-transpose) and \(R\) is an \(m\times n\) upper-triangular matrix with nonnegative entries on the diagonal. For a matrix of full rank this factorization is unique (due to the restriction to positive entries on the diagonal).If
full=Falsethen \(Q\) has \(m\) rows and the columns form an orthonormal basis for the column space ofself. So, in particular, the conjugate-transpose of \(Q\) times \(Q\) will be an identity matrix. The matrix \(R\) will still be upper-triangular but will also have full rank, in particular it will lack the zero rows present in a full factorization of a rank-deficient matrix.The results obtained when
full=Trueare cached, hence \(Q\) and \(R\) are immutable matrices in this case.Note
This is an exact computation, so limited to exact rings. Also the base ring needs to have a fraction field implemented in Sage and this field must contain square roots. One example is the field of algebraic numbers,
QQbar, as used in the examples below. If you need numerical results, convert the base ring to the field of complex double numbers,CDF, which will use a faster routine that is careful about numerical subtleties.ALGORITHM:
“Modified Gram-Schmidt,” Algorithm 8.1 of [TB1997].
EXAMPLES:
For a nonsingular matrix, the QR decomposition is unique.
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[-2, 0, -4, -1, -1], ....: [-2, 1, -6, -3, -1], ....: [1, 1, 7, 4, 5], ....: [3, 0, 8, 3, 3], ....: [-1, 1, -6, -6, 5]]) sage: Q, R = A.QR() sage: Q [ -0.4588314677411235? -0.1260506983326509? 0.3812120831224489? -0.394573711338418? -0.6874400625964?] [ -0.4588314677411235? 0.4726901187474409? -0.05198346588033394? 0.7172941251646595? -0.2209628772631?] [ 0.2294157338705618? 0.6617661662464172? 0.6619227988762521? -0.1808720937375480? 0.1964114464561?] [ 0.6882472016116853? 0.1890760474989764? -0.2044682991293135? 0.0966302966543065? -0.6628886317894?] [ -0.2294157338705618? 0.5357154679137663? -0.609939332995919? -0.536422031427112? 0.0245514308070?] sage: R [ 4.358898943540674? -0.4588314677411235? 13.07669683062202? 6.194224814505168? 2.982404540317303?] [ 0 1.670171752907625? 0.5987408170800917? -1.292019657909672? 6.207996892883057?] [ 0 0 5.444401659866974? 5.468660610611130? -0.6827161852283857?] [ 0 0 0 1.027626039419836? -3.619300149686620?] [ 0 0 0 0 0.024551430807012?] sage: Q.conjugate_transpose()*Q [1.000000000000000? 0.?e-18 0.?e-17 0.?e-16 0.?e-13] [ 0.?e-18 1.000000000000000? 0.?e-17 0.?e-16 0.?e-13] [ 0.?e-17 0.?e-17 1.000000000000000? 0.?e-16 0.?e-13] [ 0.?e-16 0.?e-16 0.?e-16 1.000000000000000? 0.?e-13] [ 0.?e-13 0.?e-13 0.?e-13 0.?e-13 1.0000000000000?] sage: Q * R == A True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[-Integer(2), Integer(0), -Integer(4), -Integer(1), -Integer(1)], ... [-Integer(2), Integer(1), -Integer(6), -Integer(3), -Integer(1)], ... [Integer(1), Integer(1), Integer(7), Integer(4), Integer(5)], ... [Integer(3), Integer(0), Integer(8), Integer(3), Integer(3)], ... [-Integer(1), Integer(1), -Integer(6), -Integer(6), Integer(5)]]) >>> Q, R = A.QR() >>> Q [ -0.4588314677411235? -0.1260506983326509? 0.3812120831224489? -0.394573711338418? -0.6874400625964?] [ -0.4588314677411235? 0.4726901187474409? -0.05198346588033394? 0.7172941251646595? -0.2209628772631?] [ 0.2294157338705618? 0.6617661662464172? 0.6619227988762521? -0.1808720937375480? 0.1964114464561?] [ 0.6882472016116853? 0.1890760474989764? -0.2044682991293135? 0.0966302966543065? -0.6628886317894?] [ -0.2294157338705618? 0.5357154679137663? -0.609939332995919? -0.536422031427112? 0.0245514308070?] >>> R [ 4.358898943540674? -0.4588314677411235? 13.07669683062202? 6.194224814505168? 2.982404540317303?] [ 0 1.670171752907625? 0.5987408170800917? -1.292019657909672? 6.207996892883057?] [ 0 0 5.444401659866974? 5.468660610611130? -0.6827161852283857?] [ 0 0 0 1.027626039419836? -3.619300149686620?] [ 0 0 0 0 0.024551430807012?] >>> Q.conjugate_transpose()*Q [1.000000000000000? 0.?e-18 0.?e-17 0.?e-16 0.?e-13] [ 0.?e-18 1.000000000000000? 0.?e-17 0.?e-16 0.?e-13] [ 0.?e-17 0.?e-17 1.000000000000000? 0.?e-16 0.?e-13] [ 0.?e-16 0.?e-16 0.?e-16 1.000000000000000? 0.?e-13] [ 0.?e-13 0.?e-13 0.?e-13 0.?e-13 1.0000000000000?] >>> Q * R == A True
# needs sage.rings.number_field A = matrix(QQbar, [[-2, 0, -4, -1, -1], [-2, 1, -6, -3, -1], [1, 1, 7, 4, 5], [3, 0, 8, 3, 3], [-1, 1, -6, -6, 5]]) Q, R = A.QR() Q R Q.conjugate_transpose()*Q Q * R == AAn example with complex numbers in
QQbar, the field of algebraic numbers.sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[-8, 4*I + 1, -I + 2, 2*I + 1], ....: [1, -2*I - 1, -I + 3, -I + 1], ....: [I + 7, 2*I + 1, -2*I + 7, -I + 1], ....: [I + 2, 0, I + 12, -1]]) sage: Q, R = A.QR() sage: Q [ -0.7302967433402215? 0.2070566455055649? + 0.5383472783144687?*I 0.2463049809998642? - 0.0764456358723292?*I 0.2381617683194332? - 0.1036596032779695?*I] [ 0.0912870929175277? -0.2070566455055649? - 0.3778783780476559?*I 0.3786559533863033? - 0.1952221495524667?*I 0.701244450214469? - 0.3643711650986595?*I] [ 0.6390096504226938? + 0.0912870929175277?*I 0.1708217325420910? + 0.6677576817554466?*I -0.03411475806452072? + 0.04090198741767143?*I 0.3140171085506764? - 0.0825191718705412?*I] [ 0.1825741858350554? + 0.0912870929175277?*I -0.03623491296347385? + 0.0724698259269477?*I 0.8632284069415110? + 0.06322839976356195?*I -0.4499694867611521? - 0.0116119181208918?*I] sage: R [ 10.95445115010333? 0.?e-18 - 1.917028951268082?*I 5.385938482134133? - 2.190890230020665?*I -0.2738612787525831? - 2.190890230020665?*I] [ 0 4.829596256417300? + 0.?e-18*I -0.869637911123373? - 5.864879483945125?*I 0.993871898426712? - 0.3054085521207082?*I] [ 0 0 12.00160760935814? + 0.?e-16*I -0.2709533402297273? + 0.4420629644486323?*I] [ 0 0 0 1.942963944258992? + 0.?e-16*I] sage: Q.conjugate_transpose()*Q [1.000000000000000? + 0.?e-19*I 0.?e-18 + 0.?e-17*I 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I] [ 0.?e-18 + 0.?e-17*I 1.000000000000000? + 0.?e-17*I 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I] [ 0.?e-17 + 0.?e-17*I 0.?e-17 + 0.?e-17*I 1.000000000000000? + 0.?e-17*I 0.?e-16 + 0.?e-16*I] [ 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I 1.000000000000000? + 0.?e-16*I] sage: Q*R - A [ 0.?e-17 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I] [ 0.?e-18 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I] [0.?e-17 + 0.?e-18*I 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I] [0.?e-18 + 0.?e-18*I 0.?e-18 + 0.?e-18*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[-Integer(8), Integer(4)*I + Integer(1), -I + Integer(2), Integer(2)*I + Integer(1)], ... [Integer(1), -Integer(2)*I - Integer(1), -I + Integer(3), -I + Integer(1)], ... [I + Integer(7), Integer(2)*I + Integer(1), -Integer(2)*I + Integer(7), -I + Integer(1)], ... [I + Integer(2), Integer(0), I + Integer(12), -Integer(1)]]) >>> Q, R = A.QR() >>> Q [ -0.7302967433402215? 0.2070566455055649? + 0.5383472783144687?*I 0.2463049809998642? - 0.0764456358723292?*I 0.2381617683194332? - 0.1036596032779695?*I] [ 0.0912870929175277? -0.2070566455055649? - 0.3778783780476559?*I 0.3786559533863033? - 0.1952221495524667?*I 0.701244450214469? - 0.3643711650986595?*I] [ 0.6390096504226938? + 0.0912870929175277?*I 0.1708217325420910? + 0.6677576817554466?*I -0.03411475806452072? + 0.04090198741767143?*I 0.3140171085506764? - 0.0825191718705412?*I] [ 0.1825741858350554? + 0.0912870929175277?*I -0.03623491296347385? + 0.0724698259269477?*I 0.8632284069415110? + 0.06322839976356195?*I -0.4499694867611521? - 0.0116119181208918?*I] >>> R [ 10.95445115010333? 0.?e-18 - 1.917028951268082?*I 5.385938482134133? - 2.190890230020665?*I -0.2738612787525831? - 2.190890230020665?*I] [ 0 4.829596256417300? + 0.?e-18*I -0.869637911123373? - 5.864879483945125?*I 0.993871898426712? - 0.3054085521207082?*I] [ 0 0 12.00160760935814? + 0.?e-16*I -0.2709533402297273? + 0.4420629644486323?*I] [ 0 0 0 1.942963944258992? + 0.?e-16*I] >>> Q.conjugate_transpose()*Q [1.000000000000000? + 0.?e-19*I 0.?e-18 + 0.?e-17*I 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I] [ 0.?e-18 + 0.?e-17*I 1.000000000000000? + 0.?e-17*I 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I] [ 0.?e-17 + 0.?e-17*I 0.?e-17 + 0.?e-17*I 1.000000000000000? + 0.?e-17*I 0.?e-16 + 0.?e-16*I] [ 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I 1.000000000000000? + 0.?e-16*I] >>> Q*R - A [ 0.?e-17 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I] [ 0.?e-18 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I] [0.?e-17 + 0.?e-18*I 0.?e-17 + 0.?e-17*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I] [0.?e-18 + 0.?e-18*I 0.?e-18 + 0.?e-18*I 0.?e-16 + 0.?e-16*I 0.?e-16 + 0.?e-16*I]
# needs sage.rings.number_field A = matrix(QQbar, [[-8, 4*I + 1, -I + 2, 2*I + 1], [1, -2*I - 1, -I + 3, -I + 1], [I + 7, 2*I + 1, -2*I + 7, -I + 1], [I + 2, 0, I + 12, -1]]) Q, R = A.QR() Q R Q.conjugate_transpose()*Q Q*R - AA rank-deficient rectangular matrix, with both values of the
fullkeyword.sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[2, -3, 3], ....: [-1, 1, -1], ....: [-1, 3, -3], ....: [-5, 1, -1]]) sage: Q, R = A.QR() sage: Q [ 0.3592106040535498? -0.5693261797050169? 0.7239227659930268? 0.1509015305256380?] [ -0.1796053020267749? 0.1445907757980996? 0 0.9730546968377341?] [ -0.1796053020267749? 0.7048800320157352? 0.672213996993525? -0.1378927778941174?] [ -0.8980265101338745? -0.3976246334447737? 0.1551263069985058? -0.10667177157846818?] sage: R [ 5.567764362830022? -2.694079530401624? 2.694079530401624?] [ 0 3.569584777515583? -3.569584777515583?] [ 0 0 0] [ 0 0 0] sage: Q.conjugate_transpose() * Q [ 1 0.?e-18 0.?e-18 0.?e-18] [ 0.?e-18 1 0.?e-18 0.?e-18] [ 0.?e-18 0.?e-18 1.000000000000000? 0.?e-18] [ 0.?e-18 0.?e-18 0.?e-18 1.000000000000000?] sage: # needs sage.rings.number_field sage: Q, R = A.QR(full=False) sage: Q [ 0.3592106040535498? -0.5693261797050169?] [-0.1796053020267749? 0.1445907757980996?] [-0.1796053020267749? 0.7048800320157352?] [-0.8980265101338745? -0.3976246334447737?] sage: R [ 5.567764362830022? -2.694079530401624? 2.694079530401624?] [ 0 3.569584777515583? -3.569584777515583?] sage: Q.conjugate_transpose()*Q [ 1 0.?e-18] [0.?e-18 1]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[Integer(2), -Integer(3), Integer(3)], ... [-Integer(1), Integer(1), -Integer(1)], ... [-Integer(1), Integer(3), -Integer(3)], ... [-Integer(5), Integer(1), -Integer(1)]]) >>> Q, R = A.QR() >>> Q [ 0.3592106040535498? -0.5693261797050169? 0.7239227659930268? 0.1509015305256380?] [ -0.1796053020267749? 0.1445907757980996? 0 0.9730546968377341?] [ -0.1796053020267749? 0.7048800320157352? 0.672213996993525? -0.1378927778941174?] [ -0.8980265101338745? -0.3976246334447737? 0.1551263069985058? -0.10667177157846818?] >>> R [ 5.567764362830022? -2.694079530401624? 2.694079530401624?] [ 0 3.569584777515583? -3.569584777515583?] [ 0 0 0] [ 0 0 0] >>> Q.conjugate_transpose() * Q [ 1 0.?e-18 0.?e-18 0.?e-18] [ 0.?e-18 1 0.?e-18 0.?e-18] [ 0.?e-18 0.?e-18 1.000000000000000? 0.?e-18] [ 0.?e-18 0.?e-18 0.?e-18 1.000000000000000?] >>> # needs sage.rings.number_field >>> Q, R = A.QR(full=False) >>> Q [ 0.3592106040535498? -0.5693261797050169?] [-0.1796053020267749? 0.1445907757980996?] [-0.1796053020267749? 0.7048800320157352?] [-0.8980265101338745? -0.3976246334447737?] >>> R [ 5.567764362830022? -2.694079530401624? 2.694079530401624?] [ 0 3.569584777515583? -3.569584777515583?] >>> Q.conjugate_transpose()*Q [ 1 0.?e-18] [0.?e-18 1]
# needs sage.rings.number_field A = matrix(QQbar, [[2, -3, 3], [-1, 1, -1], [-1, 3, -3], [-5, 1, -1]]) Q, R = A.QR() Q R Q.conjugate_transpose() * Q # needs sage.rings.number_field Q, R = A.QR(full=False) Q R Q.conjugate_transpose()*QAnother rank-deficient rectangular matrix, with complex entries, as a reduced decomposition.
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[-3*I - 3, I - 3, -12*I + 1, -2], ....: [-I - 1, -2, 5*I - 1, -I - 2], ....: [-4*I - 4, I - 5, -7*I, -I - 4]]) sage: Q, R = A.QR(full=False) sage: Q [ -0.4160251471689219? - 0.4160251471689219?*I 0.5370861555295747? + 0.1790287185098583?*I] [ -0.1386750490563073? - 0.1386750490563073?*I -0.7519206177414046? - 0.2506402059138015?*I] [ -0.5547001962252291? - 0.5547001962252291?*I -0.2148344622118299? - 0.07161148740394329?*I] sage: R [ 7.211102550927979? 3.328201177351375? - 5.269651864139676?*I 7.904477796209515? + 8.45917799243475?*I 4.021576422632911? - 2.634825932069838?*I] [ 0 1.074172311059150? -1.611258466588724? - 9.13046464400277?*I 1.611258466588724? + 0.5370861555295747?*I] sage: Q.conjugate_transpose()*Q [1 0] [0 1] sage: Q*R - A [0 0 0 0] [0 0 0 0] [0 0 0 0]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[-Integer(3)*I - Integer(3), I - Integer(3), -Integer(12)*I + Integer(1), -Integer(2)], ... [-I - Integer(1), -Integer(2), Integer(5)*I - Integer(1), -I - Integer(2)], ... [-Integer(4)*I - Integer(4), I - Integer(5), -Integer(7)*I, -I - Integer(4)]]) >>> Q, R = A.QR(full=False) >>> Q [ -0.4160251471689219? - 0.4160251471689219?*I 0.5370861555295747? + 0.1790287185098583?*I] [ -0.1386750490563073? - 0.1386750490563073?*I -0.7519206177414046? - 0.2506402059138015?*I] [ -0.5547001962252291? - 0.5547001962252291?*I -0.2148344622118299? - 0.07161148740394329?*I] >>> R [ 7.211102550927979? 3.328201177351375? - 5.269651864139676?*I 7.904477796209515? + 8.45917799243475?*I 4.021576422632911? - 2.634825932069838?*I] [ 0 1.074172311059150? -1.611258466588724? - 9.13046464400277?*I 1.611258466588724? + 0.5370861555295747?*I] >>> Q.conjugate_transpose()*Q [1 0] [0 1] >>> Q*R - A [0 0 0 0] [0 0 0 0] [0 0 0 0]
# needs sage.rings.number_field A = matrix(QQbar, [[-3*I - 3, I - 3, -12*I + 1, -2], [-I - 1, -2, 5*I - 1, -I - 2], [-4*I - 4, I - 5, -7*I, -I - 4]]) Q, R = A.QR(full=False) Q R Q.conjugate_transpose()*Q Q*R - AResults of full decompositions are cached and thus returned immutable.
sage: # needs sage.rings.number_field sage: A = random_matrix(QQbar, 2, 2) sage: Q, R = A.QR() sage: Q.is_mutable() False sage: R.is_mutable() False
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = random_matrix(QQbar, Integer(2), Integer(2)) >>> Q, R = A.QR() >>> Q.is_mutable() False >>> R.is_mutable() False
# needs sage.rings.number_field A = random_matrix(QQbar, 2, 2) Q, R = A.QR() Q.is_mutable() R.is_mutable()
Trivial cases return trivial results of the correct size, and we check \(Q\) itself in one case.
sage: # needs sage.rings.number_field sage: A = zero_matrix(QQbar, 0, 10) sage: Q, R = A.QR() sage: Q.nrows(), Q.ncols() (0, 0) sage: R.nrows(), R.ncols() (0, 10) sage: A = zero_matrix(QQbar, 3, 0) sage: Q, R = A.QR() sage: Q.nrows(), Q.ncols() (3, 3) sage: R.nrows(), R.ncols() (3, 0) sage: Q [1 0 0] [0 1 0] [0 0 1]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = zero_matrix(QQbar, Integer(0), Integer(10)) >>> Q, R = A.QR() >>> Q.nrows(), Q.ncols() (0, 0) >>> R.nrows(), R.ncols() (0, 10) >>> A = zero_matrix(QQbar, Integer(3), Integer(0)) >>> Q, R = A.QR() >>> Q.nrows(), Q.ncols() (3, 3) >>> R.nrows(), R.ncols() (3, 0) >>> Q [1 0 0] [0 1 0] [0 0 1]
# needs sage.rings.number_field A = zero_matrix(QQbar, 0, 10) Q, R = A.QR() Q.nrows(), Q.ncols() R.nrows(), R.ncols() A = zero_matrix(QQbar, 3, 0) Q, R = A.QR() Q.nrows(), Q.ncols() R.nrows(), R.ncols() Q
- T¶
Return the transpose of a matrix.
EXAMPLES:
sage: A = matrix(QQ, 5, range(25)) sage: A.T [ 0 5 10 15 20] [ 1 6 11 16 21] [ 2 7 12 17 22] [ 3 8 13 18 23] [ 4 9 14 19 24]
>>> from sage.all import * >>> A = matrix(QQ, Integer(5), range(Integer(25))) >>> A.T [ 0 5 10 15 20] [ 1 6 11 16 21] [ 2 7 12 17 22] [ 3 8 13 18 23] [ 4 9 14 19 24]
A = matrix(QQ, 5, range(25)) A.T
- adjoint(*args, **kwds)[source]¶
Deprecated: Use
adjugate()instead. See Issue #10501 for details.
- adjoint_classical()[source]¶
Return the adjugate matrix of
self(that is, the transpose of the matrix of cofactors).Let \(M\) be an \(n \times n\)-matrix. The adjugate matrix of \(M\) is the \(n \times n\)-matrix \(N\) whose \((i, j)\)-th entry is \((-1)^{i + j} \det(M_{j, i})\), where \(M_{j,i}\) is the matrix \(M\) with its \(j\)-th row and \(i\)-th column removed. It is known to satisfy \(NM = MN = \det(M)I\).
EXAMPLES:
sage: M = Matrix(ZZ,2,2,[5,2,3,4]); M [5 2] [3 4] sage: N = M.adjugate(); N [ 4 -2] [-3 5] sage: M * N [14 0] [ 0 14] sage: N * M [14 0] [ 0 14] sage: M = Matrix(QQ, 2, 2, [5/3,2/56, 33/13,41/10]); M [ 5/3 1/28] [33/13 41/10] sage: N = M.adjugate(); N # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3] sage: M * N # needs sage.libs.pari [7363/1092 0] [ 0 7363/1092]
>>> from sage.all import * >>> M = Matrix(ZZ,Integer(2),Integer(2),[Integer(5),Integer(2),Integer(3),Integer(4)]); M [5 2] [3 4] >>> N = M.adjugate(); N [ 4 -2] [-3 5] >>> M * N [14 0] [ 0 14] >>> N * M [14 0] [ 0 14] >>> M = Matrix(QQ, Integer(2), Integer(2), [Integer(5)/Integer(3),Integer(2)/Integer(56), Integer(33)/Integer(13),Integer(41)/Integer(10)]); M [ 5/3 1/28] [33/13 41/10] >>> N = M.adjugate(); N # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3] >>> M * N # needs sage.libs.pari [7363/1092 0] [ 0 7363/1092]
M = Matrix(ZZ,2,2,[5,2,3,4]); M N = M.adjugate(); N M * N N * M M = Matrix(QQ, 2, 2, [5/3,2/56, 33/13,41/10]); M N = M.adjugate(); N # needs sage.libs.pari M * N # needs sage.libs.pari
An alias is
adjoint_classical(), which replaces the deprecatedadjoint()method:sage: M.adjoint() # needs sage.libs.pari ...: DeprecationWarning: adjoint is deprecated. Please use adjugate instead. See https://github.com/sagemath/sage/issues/10501 for details. [ 41/10 -1/28] [-33/13 5/3] sage: M.adjoint_classical() # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3]
>>> from sage.all import * >>> M.adjoint() # needs sage.libs.pari ...: DeprecationWarning: adjoint is deprecated. Please use adjugate instead. See https://github.com/sagemath/sage/issues/10501 for details. [ 41/10 -1/28] [-33/13 5/3] >>> M.adjoint_classical() # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3]
M.adjoint() # needs sage.libs.pari M.adjoint_classical() # needs sage.libs.pari
ALGORITHM:
Use PARI whenever the method
self._adjugateis included to do so in an inheriting class. Otherwise, use a generic division-free algorithm that computes the adjugate matrix from the characteristic polynomial.The result is cached.
- adjugate()[source]¶
Return the adjugate matrix of
self(that is, the transpose of the matrix of cofactors).Let \(M\) be an \(n \times n\)-matrix. The adjugate matrix of \(M\) is the \(n \times n\)-matrix \(N\) whose \((i, j)\)-th entry is \((-1)^{i + j} \det(M_{j, i})\), where \(M_{j,i}\) is the matrix \(M\) with its \(j\)-th row and \(i\)-th column removed. It is known to satisfy \(NM = MN = \det(M)I\).
EXAMPLES:
sage: M = Matrix(ZZ,2,2,[5,2,3,4]); M [5 2] [3 4] sage: N = M.adjugate(); N [ 4 -2] [-3 5] sage: M * N [14 0] [ 0 14] sage: N * M [14 0] [ 0 14] sage: M = Matrix(QQ, 2, 2, [5/3,2/56, 33/13,41/10]); M [ 5/3 1/28] [33/13 41/10] sage: N = M.adjugate(); N # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3] sage: M * N # needs sage.libs.pari [7363/1092 0] [ 0 7363/1092]
>>> from sage.all import * >>> M = Matrix(ZZ,Integer(2),Integer(2),[Integer(5),Integer(2),Integer(3),Integer(4)]); M [5 2] [3 4] >>> N = M.adjugate(); N [ 4 -2] [-3 5] >>> M * N [14 0] [ 0 14] >>> N * M [14 0] [ 0 14] >>> M = Matrix(QQ, Integer(2), Integer(2), [Integer(5)/Integer(3),Integer(2)/Integer(56), Integer(33)/Integer(13),Integer(41)/Integer(10)]); M [ 5/3 1/28] [33/13 41/10] >>> N = M.adjugate(); N # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3] >>> M * N # needs sage.libs.pari [7363/1092 0] [ 0 7363/1092]
M = Matrix(ZZ,2,2,[5,2,3,4]); M N = M.adjugate(); N M * N N * M M = Matrix(QQ, 2, 2, [5/3,2/56, 33/13,41/10]); M N = M.adjugate(); N # needs sage.libs.pari M * N # needs sage.libs.pari
An alias is
adjoint_classical(), which replaces the deprecatedadjoint()method:sage: M.adjoint() # needs sage.libs.pari ...: DeprecationWarning: adjoint is deprecated. Please use adjugate instead. See https://github.com/sagemath/sage/issues/10501 for details. [ 41/10 -1/28] [-33/13 5/3] sage: M.adjoint_classical() # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3]
>>> from sage.all import * >>> M.adjoint() # needs sage.libs.pari ...: DeprecationWarning: adjoint is deprecated. Please use adjugate instead. See https://github.com/sagemath/sage/issues/10501 for details. [ 41/10 -1/28] [-33/13 5/3] >>> M.adjoint_classical() # needs sage.libs.pari [ 41/10 -1/28] [-33/13 5/3]
M.adjoint() # needs sage.libs.pari M.adjoint_classical() # needs sage.libs.pari
ALGORITHM:
Use PARI whenever the method
self._adjugateis included to do so in an inheriting class. Otherwise, use a generic division-free algorithm that computes the adjugate matrix from the characteristic polynomial.The result is cached.
- apply_map(phi, R=None, sparse=None)[source]¶
Apply the given map phi (an arbitrary Python function or callable object) to this dense matrix. If R is not given, automatically determine the base ring of the resulting matrix.
INPUT:
sparse– boolean (default:False); ``Trueto make the output a sparse matrixphi– arbitrary Python function or callable objectR– (optional) ring
OUTPUT: a matrix over R
EXAMPLES:
sage: m = matrix(ZZ, 3, 3, range(9)) sage: k.<a> = GF(9) # needs sage.rings.finite_rings sage: f = lambda x: k(x) sage: n = m.apply_map(f); n # needs sage.rings.finite_rings [0 1 2] [0 1 2] [0 1 2] sage: n.parent() # needs sage.rings.finite_rings Full MatrixSpace of 3 by 3 dense matrices over Finite Field in a of size 3^2
>>> from sage.all import * >>> m = matrix(ZZ, Integer(3), Integer(3), range(Integer(9))) >>> k = GF(Integer(9), names=('a',)); (a,) = k._first_ngens(1)# needs sage.rings.finite_rings >>> f = lambda x: k(x) >>> n = m.apply_map(f); n # needs sage.rings.finite_rings [0 1 2] [0 1 2] [0 1 2] >>> n.parent() # needs sage.rings.finite_rings Full MatrixSpace of 3 by 3 dense matrices over Finite Field in a of size 3^2
m = matrix(ZZ, 3, 3, range(9)) k.<a> = GF(9) # needs sage.rings.finite_rings f = lambda x: k(x) n = m.apply_map(f); n # needs sage.rings.finite_rings n.parent() # needs sage.rings.finite_rings
In this example, we explicitly specify the codomain.
sage: s = GF(3) sage: f = lambda x: s(x) sage: n = m.apply_map(f, k); n # needs sage.rings.finite_rings [0 1 2] [0 1 2] [0 1 2] sage: n.parent() # needs sage.rings.finite_rings Full MatrixSpace of 3 by 3 dense matrices over Finite Field in a of size 3^2
>>> from sage.all import * >>> s = GF(Integer(3)) >>> f = lambda x: s(x) >>> n = m.apply_map(f, k); n # needs sage.rings.finite_rings [0 1 2] [0 1 2] [0 1 2] >>> n.parent() # needs sage.rings.finite_rings Full MatrixSpace of 3 by 3 dense matrices over Finite Field in a of size 3^2
s = GF(3) f = lambda x: s(x) n = m.apply_map(f, k); n # needs sage.rings.finite_rings n.parent() # needs sage.rings.finite_rings
If
selfis subdivided, the result will be as well:sage: m = matrix(2, 2, srange(4)) sage: m.subdivide(None, 1); m [0|1] [2|3] sage: m.apply_map(lambda x: x*x) [0|1] [4|9]
>>> from sage.all import * >>> m = matrix(Integer(2), Integer(2), srange(Integer(4))) >>> m.subdivide(None, Integer(1)); m [0|1] [2|3] >>> m.apply_map(lambda x: x*x) [0|1] [4|9]
m = matrix(2, 2, srange(4)) m.subdivide(None, 1); m m.apply_map(lambda x: x*x)
If the matrix is sparse, the result will be as well:
sage: m = matrix(ZZ,100,100,sparse=True) sage: m[18,32] = -6 sage: m[1,83] = 19 sage: n = m.apply_map(abs, R=ZZ) sage: n.dict() {(1, 83): 19, (18, 32): 6} sage: n.is_sparse() True
>>> from sage.all import * >>> m = matrix(ZZ,Integer(100),Integer(100),sparse=True) >>> m[Integer(18),Integer(32)] = -Integer(6) >>> m[Integer(1),Integer(83)] = Integer(19) >>> n = m.apply_map(abs, R=ZZ) >>> n.dict() {(1, 83): 19, (18, 32): 6} >>> n.is_sparse() True
m = matrix(ZZ,100,100,sparse=True) m[18,32] = -6 m[1,83] = 19 n = m.apply_map(abs, R=ZZ) n.dict() n.is_sparse()
If the map sends most of the matrix to zero, then it may be useful to get the result as a sparse matrix.
sage: m = matrix(ZZ, 3, 3, range(1, 10)) sage: n = m.apply_map(lambda x: 1//x, sparse=True); n [1 0 0] [0 0 0] [0 0 0] sage: n.parent() Full MatrixSpace of 3 by 3 sparse matrices over Integer Ring
>>> from sage.all import * >>> m = matrix(ZZ, Integer(3), Integer(3), range(Integer(1), Integer(10))) >>> n = m.apply_map(lambda x: Integer(1)//x, sparse=True); n [1 0 0] [0 0 0] [0 0 0] >>> n.parent() Full MatrixSpace of 3 by 3 sparse matrices over Integer Ring
m = matrix(ZZ, 3, 3, range(1, 10)) n = m.apply_map(lambda x: 1//x, sparse=True); n n.parent()
- apply_morphism(phi)[source]¶
Apply the morphism phi to the coefficients of this dense matrix.
The resulting matrix is over the codomain of phi.
INPUT:
phi– a morphism, sophiis callable andphi.domain()andphi.codomain()are defined. The codomain must be a ring
OUTPUT: a matrix over the codomain of phi
EXAMPLES:
sage: m = matrix(ZZ, 3, 3, range(9)) sage: phi = ZZ.hom(GF(5)) sage: m.apply_morphism(phi) [0 1 2] [3 4 0] [1 2 3] sage: parent(m.apply_morphism(phi)) Full MatrixSpace of 3 by 3 dense matrices over Finite Field of size 5
>>> from sage.all import * >>> m = matrix(ZZ, Integer(3), Integer(3), range(Integer(9))) >>> phi = ZZ.hom(GF(Integer(5))) >>> m.apply_morphism(phi) [0 1 2] [3 4 0] [1 2 3] >>> parent(m.apply_morphism(phi)) Full MatrixSpace of 3 by 3 dense matrices over Finite Field of size 5
m = matrix(ZZ, 3, 3, range(9)) phi = ZZ.hom(GF(5)) m.apply_morphism(phi) parent(m.apply_morphism(phi))
We apply a morphism to a matrix over a polynomial ring:
sage: R.<x,y> = QQ[] sage: m = matrix(2, [x,x^2 + y, 2/3*y^2-x, x]); m [ x x^2 + y] [2/3*y^2 - x x] sage: phi = R.hom([y,x]) sage: m.apply_morphism(phi) [ y y^2 + x] [2/3*x^2 - y y]
>>> from sage.all import * >>> R = QQ['x, y']; (x, y,) = R._first_ngens(2) >>> m = matrix(Integer(2), [x,x**Integer(2) + y, Integer(2)/Integer(3)*y**Integer(2)-x, x]); m [ x x^2 + y] [2/3*y^2 - x x] >>> phi = R.hom([y,x]) >>> m.apply_morphism(phi) [ y y^2 + x] [2/3*x^2 - y y]
R.<x,y> = QQ[] m = matrix(2, [x,x^2 + y, 2/3*y^2-x, x]); m phi = R.hom([y,x]) m.apply_morphism(phi)
- as_bipartite_graph()[source]¶
Construct a bipartite graph
Brepresenting the matrix uniquely.Vertices are labeled 1 to
nrowson the left andnrows+ 1 tonrows+ncolson the right, representing rows and columns correspondingly. Each row is connected to each column with an edge weighted by the value of the corresponding matrix entry.This graph is a helper for calculating automorphisms of a matrix under row and column permutations. See
automorphisms_of_rows_and_columns().OUTPUT: a bipartite graph
EXAMPLES:
sage: M = matrix(QQ, [[1/3, 7], [6, 1/4], [8, -5]]) sage: M [1/3 7] [ 6 1/4] [ 8 -5] sage: # needs sage.graphs sage: B = M.as_bipartite_graph(); B Bipartite graph on 5 vertices sage: B.edges(sort=True) [(1, 4, 1/3), (1, 5, 7), (2, 4, 6), (2, 5, 1/4), (3, 4, 8), (3, 5, -5)] sage: len(B.left) == M.nrows() True sage: len(B.right) == M.ncols() True
>>> from sage.all import * >>> M = matrix(QQ, [[Integer(1)/Integer(3), Integer(7)], [Integer(6), Integer(1)/Integer(4)], [Integer(8), -Integer(5)]]) >>> M [1/3 7] [ 6 1/4] [ 8 -5] >>> # needs sage.graphs >>> B = M.as_bipartite_graph(); B Bipartite graph on 5 vertices >>> B.edges(sort=True) [(1, 4, 1/3), (1, 5, 7), (2, 4, 6), (2, 5, 1/4), (3, 4, 8), (3, 5, -5)] >>> len(B.left) == M.nrows() True >>> len(B.right) == M.ncols() True
M = matrix(QQ, [[1/3, 7], [6, 1/4], [8, -5]]) M # needs sage.graphs B = M.as_bipartite_graph(); B B.edges(sort=True) len(B.left) == M.nrows() len(B.right) == M.ncols()
- as_sum_of_permutations()[source]¶
Return the current matrix as a sum of permutation matrices.
According to the Birkhoff-von Neumann Theorem, any bistochastic matrix can be written as a positive sum of permutation matrices, which also means that the polytope of bistochastic matrices is integer.
As a non-bistochastic matrix can obviously not be written as a sum of permutations, this theorem is an equivalence.
This function, given a bistochastic matrix, returns the corresponding decomposition.
See also
bistochastic_as_sum_of_permutations– for more information on this method.
EXAMPLES:
We create a bistochastic matrix from a convex sum of permutations, then try to deduce the decomposition from the matrix
sage: L = [] sage: L.append((9, Permutation([4, 1, 3, 5, 2]))) sage: L.append((6, Permutation([5, 3, 4, 1, 2]))) sage: L.append((3, Permutation([3, 1, 4, 2, 5]))) sage: L.append((2, Permutation([1, 4, 2, 3, 5]))) sage: M = sum([c * p.to_matrix() for c, p in L]) sage: from sage.combinat.permutation import bistochastic_as_sum_of_permutations sage: decomp = bistochastic_as_sum_of_permutations(M) # needs sage.combinat sage.graphs sage: print(decomp) # needs sage.combinat sage.graphs 2*B[[1, 4, 2, 3, 5]] + 3*B[[3, 1, 4, 2, 5]] + 9*B[[4, 1, 3, 5, 2]] + 6*B[[5, 3, 4, 1, 2]]
>>> from sage.all import * >>> L = [] >>> L.append((Integer(9), Permutation([Integer(4), Integer(1), Integer(3), Integer(5), Integer(2)]))) >>> L.append((Integer(6), Permutation([Integer(5), Integer(3), Integer(4), Integer(1), Integer(2)]))) >>> L.append((Integer(3), Permutation([Integer(3), Integer(1), Integer(4), Integer(2), Integer(5)]))) >>> L.append((Integer(2), Permutation([Integer(1), Integer(4), Integer(2), Integer(3), Integer(5)]))) >>> M = sum([c * p.to_matrix() for c, p in L]) >>> from sage.combinat.permutation import bistochastic_as_sum_of_permutations >>> decomp = bistochastic_as_sum_of_permutations(M) # needs sage.combinat sage.graphs >>> print(decomp) # needs sage.combinat sage.graphs 2*B[[1, 4, 2, 3, 5]] + 3*B[[3, 1, 4, 2, 5]] + 9*B[[4, 1, 3, 5, 2]] + 6*B[[5, 3, 4, 1, 2]]
L = [] L.append((9, Permutation([4, 1, 3, 5, 2]))) L.append((6, Permutation([5, 3, 4, 1, 2]))) L.append((3, Permutation([3, 1, 4, 2, 5]))) L.append((2, Permutation([1, 4, 2, 3, 5]))) M = sum([c * p.to_matrix() for c, p in L]) from sage.combinat.permutation import bistochastic_as_sum_of_permutations decomp = bistochastic_as_sum_of_permutations(M) # needs sage.combinat sage.graphs print(decomp) # needs sage.combinat sage.graphs
An exception is raised when the matrix is not bistochastic:
sage: M = Matrix([[2,3],[2,2]]) sage: decomp = bistochastic_as_sum_of_permutations(M) # needs sage.graphs Traceback (most recent call last): ... ValueError: The matrix is not bistochastic
>>> from sage.all import * >>> M = Matrix([[Integer(2),Integer(3)],[Integer(2),Integer(2)]]) >>> decomp = bistochastic_as_sum_of_permutations(M) # needs sage.graphs Traceback (most recent call last): ... ValueError: The matrix is not bistochastic
M = Matrix([[2,3],[2,2]]) decomp = bistochastic_as_sum_of_permutations(M) # needs sage.graphs
- automorphisms_of_rows_and_columns()[source]¶
Return the automorphisms of
selfunder permutations of rows and columns as a list of pairs ofPermutationGroupElementobjects.EXAMPLES:
sage: # needs sage.graphs sage.groups sage: M = matrix(ZZ,[[1,0],[1,0],[0,1]]); M [1 0] [1 0] [0 1] sage: A = M.automorphisms_of_rows_and_columns(); A [((), ()), ((1,2), ())] sage: M = matrix(ZZ, [[1,1,1,1],[1,1,1,1]]) sage: A = M.automorphisms_of_rows_and_columns() sage: len(A) 48
>>> from sage.all import * >>> # needs sage.graphs sage.groups >>> M = matrix(ZZ,[[Integer(1),Integer(0)],[Integer(1),Integer(0)],[Integer(0),Integer(1)]]); M [1 0] [1 0] [0 1] >>> A = M.automorphisms_of_rows_and_columns(); A [((), ()), ((1,2), ())] >>> M = matrix(ZZ, [[Integer(1),Integer(1),Integer(1),Integer(1)],[Integer(1),Integer(1),Integer(1),Integer(1)]]) >>> A = M.automorphisms_of_rows_and_columns() >>> len(A) 48
# needs sage.graphs sage.groups M = matrix(ZZ,[[1,0],[1,0],[0,1]]); M A = M.automorphisms_of_rows_and_columns(); A M = matrix(ZZ, [[1,1,1,1],[1,1,1,1]]) A = M.automorphisms_of_rows_and_columns() len(A)
One can now apply these automorphisms to
Mto show that it leaves it invariant:sage: all(M.with_permuted_rows_and_columns(*i) == M for i in A) # needs sage.graphs sage.groups True
>>> from sage.all import * >>> all(M.with_permuted_rows_and_columns(*i) == M for i in A) # needs sage.graphs sage.groups True
all(M.with_permuted_rows_and_columns(*i) == M for i in A) # needs sage.graphs sage.groups
Check that Issue #25426 is fixed:
sage: j = matrix([(3, 2, 1, 0, 0), ....: (2, 2, 0, 1, 0), ....: (1, 0, 3, 0, 2), ....: (0, 1, 0, 2, 1), ....: (0, 0, 2, 1, 2)]) sage: j.automorphisms_of_rows_and_columns() # needs sage.graphs sage.groups [((), ()), ((1,3)(2,5), (1,3)(2,5))]
>>> from sage.all import * >>> j = matrix([(Integer(3), Integer(2), Integer(1), Integer(0), Integer(0)), ... (Integer(2), Integer(2), Integer(0), Integer(1), Integer(0)), ... (Integer(1), Integer(0), Integer(3), Integer(0), Integer(2)), ... (Integer(0), Integer(1), Integer(0), Integer(2), Integer(1)), ... (Integer(0), Integer(0), Integer(2), Integer(1), Integer(2))]) >>> j.automorphisms_of_rows_and_columns() # needs sage.graphs sage.groups [((), ()), ((1,3)(2,5), (1,3)(2,5))]
j = matrix([(3, 2, 1, 0, 0), (2, 2, 0, 1, 0), (1, 0, 3, 0, 2), (0, 1, 0, 2, 1), (0, 0, 2, 1, 2)]) j.automorphisms_of_rows_and_columns() # needs sage.graphs sage.groups
- block_ldlt(classical=False)[source]¶
Compute a block-\(LDL^{T}\) factorization of a Hermitian matrix.
The standard \(LDL^{T}\) factorization of a positive-definite matrix \(A\) factors it as \(A = LDL^{T}\) where \(L\) is unit-lower-triangular and \(D\) is diagonal. If one allows row/column swaps via a permutation matrix \(P\), then this factorization can be extended to many positive-semidefinite matrices \(A\) via the factorization \(P^{T}AP = LDL^{T}\) that places the zeros at the bottom of \(D\) to avoid division by zero. These factorizations extend easily to complex Hermitian matrices when one replaces the transpose by the conjugate-transpose.
However, we can go one step further. If, in addition, we allow \(D\) to potentially contain \(2 \times 2\) blocks on its diagonal, then every real or complex Hermitian matrix \(A\) can be factored as \(A = PLDL^{*}P^{T}\). When the row/column swaps are made intelligently, this process is numerically stable over inexact rings like
RDF. Bunch and Kaufman describe such a “pivot” scheme that is suitable for the solution of Hermitian systems, and that is how we choose our row and column swaps.INPUT:
classical– boolean (default:False); whether or not to attempt a classical non-block \(LDL^{T}\) factorization with no row/column swaps.
Warning
Not all matrices have a classical \(LDL^{T}\) factorization. Set
classical=Trueat your own risk, preferably after verifying that your matrix is positive-definite and (over inexact rings) not ill-conditioned.OUTPUT:
If the input matrix is not Hermitian, the output from this function is undefined. Otherwise, we return a triple \((P,L,D)\) such that \(A = PLDL^{*}P^{T}\) and
\(P\) is a permutation matrix,
\(L\) is unit lower-triangular,
\(D\) is a block-diagonal matrix whose blocks are of size one or two.
With
classical=True, the permutation matrix \(P\) is always an identity matrix and the diagonal blocks are always one-by-one. AValueErroris raised if the matrix has no classical \(LDL^{T}\) factorization.ALGORITHM:
We essentially follow “Algorithm A” in the paper by Bunch and Kaufman [BK1977] that describes the stable pivoting strategy. The same scheme is described by Higham [Hig2002].
See also
REFERENCES:
EXAMPLES:
This three-by-three real symmetric matrix has one positive, one negative, and one zero eigenvalue – so it is not any flavor of (semi)definite, yet we can still factor it:
sage: A = matrix(QQ, [[0, 1, 0], ....: [1, 1, 2], ....: [0, 2, 0]]) sage: P,L,D = A.block_ldlt() sage: P [0 0 1] [1 0 0] [0 1 0] sage: L [ 1 0 0] [ 2 1 0] [ 1 1/2 1] sage: D [ 1| 0| 0] [--+--+--] [ 0|-4| 0] [--+--+--] [ 0| 0| 0] sage: P.transpose()*A*P == L*D*L.transpose() True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(0), Integer(1), Integer(0)], ... [Integer(1), Integer(1), Integer(2)], ... [Integer(0), Integer(2), Integer(0)]]) >>> P,L,D = A.block_ldlt() >>> P [0 0 1] [1 0 0] [0 1 0] >>> L [ 1 0 0] [ 2 1 0] [ 1 1/2 1] >>> D [ 1| 0| 0] [--+--+--] [ 0|-4| 0] [--+--+--] [ 0| 0| 0] >>> P.transpose()*A*P == L*D*L.transpose() True
A = matrix(QQ, [[0, 1, 0], [1, 1, 2], [0, 2, 0]]) P,L,D = A.block_ldlt() P L D P.transpose()*A*P == L*D*L.transpose()This two-by-two matrix has no classical factorization, but it constitutes its own block-factorization:
sage: A = matrix(QQ, [ [0,1], ....: [1,0] ]) sage: A.block_ldlt(classical=True) Traceback (most recent call last): ... ValueError: matrix has no classical LDL^T factorization sage: A.block_ldlt() ( [1 0] [1 0] [0 1] [0 1], [0 1], [1 0] )
>>> from sage.all import * >>> A = matrix(QQ, [ [Integer(0),Integer(1)], ... [Integer(1),Integer(0)] ]) >>> A.block_ldlt(classical=True) Traceback (most recent call last): ... ValueError: matrix has no classical LDL^T factorization >>> A.block_ldlt() ( [1 0] [1 0] [0 1] [0 1], [0 1], [1 0] )
A = matrix(QQ, [ [0,1], [1,0] ]) A.block_ldlt(classical=True) A.block_ldlt()The same is true of the following complex Hermitian matrix:
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [ [ 0,I], ....: [-I,0] ]) sage: A.block_ldlt(classical=True) Traceback (most recent call last): ... ValueError: matrix has no classical LDL^T factorization sage: A.block_ldlt() ( [1 0] [1 0] [ 0 I] [0 1], [0 1], [-I 0] )
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [ [ Integer(0),I], ... [-I,Integer(0)] ]) >>> A.block_ldlt(classical=True) Traceback (most recent call last): ... ValueError: matrix has no classical LDL^T factorization >>> A.block_ldlt() ( [1 0] [1 0] [ 0 I] [0 1], [0 1], [-I 0] )
# needs sage.rings.number_field A = matrix(QQbar, [ [ 0,I], [-I,0] ]) A.block_ldlt(classical=True) A.block_ldlt()Complete diagonal pivoting could cause problems for the following matrix, since the diagonal entries are small compared to the off-diagonals that must be zeroed; however, the block algorithm refuses to factor it:
sage: A = matrix(RDF, 2, 2, [ [1e-10, 1 ], ....: [1 , 2e-10] ]) sage: _,L,D = A.block_ldlt(classical=True) sage: L*D*L.T [1e-10 1.0] [ 1.0 0.0] sage: A.block_ldlt() # needs scipy ( [1.0 0.0] [1.0 0.0] [1e-10 1.0] [0.0 1.0], [0.0 1.0], [ 1.0 2e-10] )
>>> from sage.all import * >>> A = matrix(RDF, Integer(2), Integer(2), [ [RealNumber('1e-10'), Integer(1) ], ... [Integer(1) , RealNumber('2e-10')] ]) >>> _,L,D = A.block_ldlt(classical=True) >>> L*D*L.T [1e-10 1.0] [ 1.0 0.0] >>> A.block_ldlt() # needs scipy ( [1.0 0.0] [1.0 0.0] [1e-10 1.0] [0.0 1.0], [0.0 1.0], [ 1.0 2e-10] )
A = matrix(RDF, 2, 2, [ [1e-10, 1 ], [1 , 2e-10] ]) _,L,D = A.block_ldlt(classical=True) L*D*L.T A.block_ldlt() # needs scipyThe factorization over an inexact ring is necessarily inexact, but \(P^{T}AP\) will ideally be close to \(LDL^{*}\) in the metric induced by the norm:
sage: # needs scipy sage.rings.complex_double sage.symbolic sage: A = matrix(CDF, 2, 2, [ [-1.1933, -0.3185 - 1.3553*I], ....: [-0.3185 + 1.3553*I, 1.5729 ] ]) sage: P,L,D = A.block_ldlt() sage: P.T*A*P == L*D*L.H False sage: (P.T*A*P - L*D*L.H).norm() < 1e-10 True
>>> from sage.all import * >>> # needs scipy sage.rings.complex_double sage.symbolic >>> A = matrix(CDF, Integer(2), Integer(2), [ [-RealNumber('1.1933'), -RealNumber('0.3185') - RealNumber('1.3553')*I], ... [-RealNumber('0.3185') + RealNumber('1.3553')*I, RealNumber('1.5729') ] ]) >>> P,L,D = A.block_ldlt() >>> P.T*A*P == L*D*L.H False >>> (P.T*A*P - L*D*L.H).norm() < RealNumber('1e-10') True
# needs scipy sage.rings.complex_double sage.symbolic A = matrix(CDF, 2, 2, [ [-1.1933, -0.3185 - 1.3553*I], [-0.3185 + 1.3553*I, 1.5729 ] ]) P,L,D = A.block_ldlt() P.T*A*P == L*D*L.H (P.T*A*P - L*D*L.H).norm() < 1e-10This matrix has a singular three-by-three leading principal submatrix, and therefore has no classical factorization:
sage: A = matrix(QQ, [[21, 15, 12, -2], ....: [15, 12, 9, 6], ....: [12, 9, 7, 3], ....: [-2, 6, 3, 8]]) sage: A[0:3,0:3].det() == 0 True sage: A.block_ldlt(classical=True) Traceback (most recent call last): ... ValueError: matrix has no classical LDL^T factorization sage: A.block_ldlt() ( [1 0 0 0] [ 1 0 0 0] [0 0 1 0] [ -2/21 1 0 0] [0 0 0 1] [ 5/7 39/41 1 0] [0 1 0 0], [ 4/7 87/164 48/79 1], [ 21| 0| 0| 0] [-------+-------+-------+-------] [ 0| 164/21| 0| 0] [-------+-------+-------+-------] [ 0| 0|-237/41| 0] [-------+-------+-------+-------] [ 0| 0| 0| 25/316] )
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(21), Integer(15), Integer(12), -Integer(2)], ... [Integer(15), Integer(12), Integer(9), Integer(6)], ... [Integer(12), Integer(9), Integer(7), Integer(3)], ... [-Integer(2), Integer(6), Integer(3), Integer(8)]]) >>> A[Integer(0):Integer(3),Integer(0):Integer(3)].det() == Integer(0) True >>> A.block_ldlt(classical=True) Traceback (most recent call last): ... ValueError: matrix has no classical LDL^T factorization >>> A.block_ldlt() ( [1 0 0 0] [ 1 0 0 0] [0 0 1 0] [ -2/21 1 0 0] [0 0 0 1] [ 5/7 39/41 1 0] [0 1 0 0], [ 4/7 87/164 48/79 1], <BLANKLINE> [ 21| 0| 0| 0] [-------+-------+-------+-------] [ 0| 164/21| 0| 0] [-------+-------+-------+-------] [ 0| 0|-237/41| 0] [-------+-------+-------+-------] [ 0| 0| 0| 25/316] )
A = matrix(QQ, [[21, 15, 12, -2], [15, 12, 9, 6], [12, 9, 7, 3], [-2, 6, 3, 8]]) A[0:3,0:3].det() == 0 A.block_ldlt(classical=True) A.block_ldlt()An indefinite symmetric matrix that happens to have a classical factorization:
sage: A = matrix(QQ, [[ 3, -6, 9, 6, -9], ....: [-6, 11, -16, -11, 17], ....: [ 9, -16, 28, 16, -40], ....: [ 6, -11, 16, 9, -19], ....: [-9, 17, -40, -19, 68]]) sage: A.block_ldlt(classical=True)[1:] ( [ 3| 0| 0| 0| 0] [--+--+--+--+--] [ 0|-1| 0| 0| 0] [--+--+--+--+--] [ 1 0 0 0 0] [ 0| 0| 5| 0| 0] [-2 1 0 0 0] [--+--+--+--+--] [ 3 -2 1 0 0] [ 0| 0| 0|-2| 0] [ 2 -1 0 1 0] [--+--+--+--+--] [-3 1 -3 1 1], [ 0| 0| 0| 0|-1] )
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(3), -Integer(6), Integer(9), Integer(6), -Integer(9)], ... [-Integer(6), Integer(11), -Integer(16), -Integer(11), Integer(17)], ... [ Integer(9), -Integer(16), Integer(28), Integer(16), -Integer(40)], ... [ Integer(6), -Integer(11), Integer(16), Integer(9), -Integer(19)], ... [-Integer(9), Integer(17), -Integer(40), -Integer(19), Integer(68)]]) >>> A.block_ldlt(classical=True)[Integer(1):] ( [ 3| 0| 0| 0| 0] [--+--+--+--+--] [ 0|-1| 0| 0| 0] [--+--+--+--+--] [ 1 0 0 0 0] [ 0| 0| 5| 0| 0] [-2 1 0 0 0] [--+--+--+--+--] [ 3 -2 1 0 0] [ 0| 0| 0|-2| 0] [ 2 -1 0 1 0] [--+--+--+--+--] [-3 1 -3 1 1], [ 0| 0| 0| 0|-1] )
A = matrix(QQ, [[ 3, -6, 9, 6, -9], [-6, 11, -16, -11, 17], [ 9, -16, 28, 16, -40], [ 6, -11, 16, 9, -19], [-9, 17, -40, -19, 68]]) A.block_ldlt(classical=True)[1:]An indefinite Hermitian matrix that happens to have a classical factorization:
sage: F.<I> = QuadraticField(-1) # needs sage.rings.number_field sage: A = matrix(F, [[ 2, 4 - 2*I, 2 + 2*I], # needs sage.rings.number_field ....: [4 + 2*I, 8, 10*I], ....: [2 - 2*I, -10*I, -3]]) sage: A.block_ldlt(classical=True)[1:] # needs sage.rings.number_field ( [ 2| 0| 0] [--+--+--] [ 1 0 0] [ 0|-2| 0] [ I + 2 1 0] [--+--+--] [ -I + 1 2*I + 1 1], [ 0| 0| 3] )
>>> from sage.all import * >>> F = QuadraticField(-Integer(1), names=('I',)); (I,) = F._first_ngens(1)# needs sage.rings.number_field >>> A = matrix(F, [[ Integer(2), Integer(4) - Integer(2)*I, Integer(2) + Integer(2)*I], # needs sage.rings.number_field ... [Integer(4) + Integer(2)*I, Integer(8), Integer(10)*I], ... [Integer(2) - Integer(2)*I, -Integer(10)*I, -Integer(3)]]) >>> A.block_ldlt(classical=True)[Integer(1):] # needs sage.rings.number_field ( [ 2| 0| 0] [--+--+--] [ 1 0 0] [ 0|-2| 0] [ I + 2 1 0] [--+--+--] [ -I + 1 2*I + 1 1], [ 0| 0| 3] )
F.<I> = QuadraticField(-1) # needs sage.rings.number_field A = matrix(F, [[ 2, 4 - 2*I, 2 + 2*I], # needs sage.rings.number_field [4 + 2*I, 8, 10*I], [2 - 2*I, -10*I, -3]]) A.block_ldlt(classical=True)[1:] # needs sage.rings.number_field
- characteristic_polynomial(*args, **kwds)[source]¶
Synonym for self.charpoly(…).
EXAMPLES:
sage: a = matrix(QQ, 2,2, [1,2,3,4]); a [1 2] [3 4] sage: a.characteristic_polynomial('T') # needs sage.libs.pari T^2 - 5*T - 2
>>> from sage.all import * >>> a = matrix(QQ, Integer(2),Integer(2), [Integer(1),Integer(2),Integer(3),Integer(4)]); a [1 2] [3 4] >>> a.characteristic_polynomial('T') # needs sage.libs.pari T^2 - 5*T - 2
a = matrix(QQ, 2,2, [1,2,3,4]); a a.characteristic_polynomial('T') # needs sage.libs.pari
- charpoly(var='x', algorithm=None)[source]¶
Return the characteristic polynomial of self, as a polynomial over the base ring.
ALGORITHM:
If the base ring has a method \(_matrix_charpoly\), we use it.
In the generic case of matrices over a ring (commutative and with unity), there is a division-free algorithm, which can be accessed using
'df', with complexity \(O(n^4)\). Alternatively, by specifying'hessenberg', this method computes the Hessenberg form of the matrix and then reads off the characteristic polynomial. Moreover, for matrices over number fields, this method can use PARI’s charpoly implementation instead.The method’s logic is as follows: If no algorithm is specified, first check if the base ring is a number field (and then use PARI), otherwise check if the base ring is the ring of integers modulo n (in which case compute the characteristic polynomial of a lift of the matrix to the integers, and then coerce back to the base), next check if the base ring is an exact field (and then use the Hessenberg form), or otherwise, use the generic division-free algorithm. If an algorithm is specified explicitly, if
algorithm == "hessenberg", use the Hessenberg form, or otherwise use the generic division-free algorithm.The result is cached.
INPUT:
var– a variable name (default:'x')algorithm– string; one of'df'– generic \(O(n^4)\) division-free algorithm'hessenberg'– use the Hessenberg form of the matrix
EXAMPLES:
First a matrix over \(\ZZ\):
sage: A = MatrixSpace(ZZ,2)( [1,2, 3,4] ) sage: f = A.charpoly('x') sage: f x^2 - 5*x - 2 sage: f.parent() Univariate Polynomial Ring in x over Integer Ring sage: f(A) [0 0] [0 0]
>>> from sage.all import * >>> A = MatrixSpace(ZZ,Integer(2))( [Integer(1),Integer(2), Integer(3),Integer(4)] ) >>> f = A.charpoly('x') >>> f x^2 - 5*x - 2 >>> f.parent() Univariate Polynomial Ring in x over Integer Ring >>> f(A) [0 0] [0 0]
A = MatrixSpace(ZZ,2)( [1,2, 3,4] ) f = A.charpoly('x') f f.parent() f(A)An example over \(\QQ\):
sage: A = MatrixSpace(QQ, 3)(range(9)) sage: A.charpoly('x') # needs sage.libs.pari x^3 - 12*x^2 - 18*x sage: A.trace() 12 sage: A.determinant() 0
>>> from sage.all import * >>> A = MatrixSpace(QQ, Integer(3))(range(Integer(9))) >>> A.charpoly('x') # needs sage.libs.pari x^3 - 12*x^2 - 18*x >>> A.trace() 12 >>> A.determinant() 0
A = MatrixSpace(QQ, 3)(range(9)) A.charpoly('x') # needs sage.libs.pari A.trace() A.determinant()We compute the characteristic polynomial of a matrix over the polynomial ring \(\ZZ[a]\):
sage: R.<a> = PolynomialRing(ZZ) sage: M = MatrixSpace(R, 2)([a,1, a,a+1]); M [ a 1] [ a a + 1] sage: f = M.charpoly('x'); f x^2 + (-2*a - 1)*x + a^2 sage: f.parent() Univariate Polynomial Ring in x over Univariate Polynomial Ring in a over Integer Ring sage: M.trace() 2*a + 1 sage: M.determinant() a^2
>>> from sage.all import * >>> R = PolynomialRing(ZZ, names=('a',)); (a,) = R._first_ngens(1) >>> M = MatrixSpace(R, Integer(2))([a,Integer(1), a,a+Integer(1)]); M [ a 1] [ a a + 1] >>> f = M.charpoly('x'); f x^2 + (-2*a - 1)*x + a^2 >>> f.parent() Univariate Polynomial Ring in x over Univariate Polynomial Ring in a over Integer Ring >>> M.trace() 2*a + 1 >>> M.determinant() a^2
R.<a> = PolynomialRing(ZZ) M = MatrixSpace(R, 2)([a,1, a,a+1]); M f = M.charpoly('x'); f f.parent() M.trace() M.determinant()We compute the characteristic polynomial of a matrix over the multi-variate polynomial ring \(\ZZ[x,y]\):
sage: R.<x,y> = PolynomialRing(ZZ,2) sage: A = MatrixSpace(R, 2)([x, y, x^2, y^2]) sage: f = A.charpoly('x'); f x^2 + (-y^2 - x)*x - x^2*y + x*y^2
>>> from sage.all import * >>> R = PolynomialRing(ZZ,Integer(2), names=('x', 'y',)); (x, y,) = R._first_ngens(2) >>> A = MatrixSpace(R, Integer(2))([x, y, x**Integer(2), y**Integer(2)]) >>> f = A.charpoly('x'); f x^2 + (-y^2 - x)*x - x^2*y + x*y^2
R.<x,y> = PolynomialRing(ZZ,2) A = MatrixSpace(R, 2)([x, y, x^2, y^2]) f = A.charpoly('x'); fIt’s a little difficult to distinguish the variables. To fix this, we temporarily view the indeterminate as \(Z\):
sage: with localvars(f.parent(), 'Z'): print(f) Z^2 + (-y^2 - x)*Z - x^2*y + x*y^2
>>> from sage.all import * >>> with localvars(f.parent(), 'Z'): print(f) Z^2 + (-y^2 - x)*Z - x^2*y + x*y^2
with localvars(f.parent(), 'Z'): print(f)
We could also compute f in terms of Z from the start:
sage: A.charpoly('Z') Z^2 + (-y^2 - x)*Z - x^2*y + x*y^2
>>> from sage.all import * >>> A.charpoly('Z') Z^2 + (-y^2 - x)*Z - x^2*y + x*y^2
A.charpoly('Z')Here is an example over a number field:
sage: # needs sage.rings.number_field sage: x = QQ['x'].gen() sage: K.<a> = NumberField(x^2 - 2) sage: m = matrix(K, [[a-1, 2], [a, a+1]]) sage: m.charpoly('Z') Z^2 - 2*a*Z - 2*a + 1 sage: m.charpoly('a')(m) == 0 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> x = QQ['x'].gen() >>> K = NumberField(x**Integer(2) - Integer(2), names=('a',)); (a,) = K._first_ngens(1) >>> m = matrix(K, [[a-Integer(1), Integer(2)], [a, a+Integer(1)]]) >>> m.charpoly('Z') Z^2 - 2*a*Z - 2*a + 1 >>> m.charpoly('a')(m) == Integer(0) True
# needs sage.rings.number_field x = QQ['x'].gen() K.<a> = NumberField(x^2 - 2) m = matrix(K, [[a-1, 2], [a, a+1]]) m.charpoly('Z') m.charpoly('a')(m) == 0Over integers modulo \(n\) with composite \(n\):
sage: A = Mat(Integers(6), 3, 3)(range(9)) sage: A.charpoly() x^3
>>> from sage.all import * >>> A = Mat(Integers(Integer(6)), Integer(3), Integer(3))(range(Integer(9))) >>> A.charpoly() x^3
A = Mat(Integers(6), 3, 3)(range(9)) A.charpoly()
Here is an example over a general commutative ring, that is to say, as of version 4.0.2, Sage does not even positively determine that
Sin the following example is an integral domain. But the computation of the characteristic polynomial succeeds as follows:sage: # needs sage.libs.singular sage: R.<a,b> = QQ[] sage: S.<x,y> = R.quo((b^3)) sage: A = matrix(S, [[x*y^2, 2*x], [2, x^10*y]]); A [ x*y^2 2*x] [ 2 x^10*y] sage: A.charpoly('T') T^2 + (-x^10*y - x*y^2)*T - 4*x
>>> from sage.all import * >>> # needs sage.libs.singular >>> R = QQ['a, b']; (a, b,) = R._first_ngens(2) >>> S = R.quo((b**Integer(3)), names=('x', 'y',)); (x, y,) = S._first_ngens(2) >>> A = matrix(S, [[x*y**Integer(2), Integer(2)*x], [Integer(2), x**Integer(10)*y]]); A [ x*y^2 2*x] [ 2 x^10*y] >>> A.charpoly('T') T^2 + (-x^10*y - x*y^2)*T - 4*x
# needs sage.libs.singular R.<a,b> = QQ[] S.<x,y> = R.quo((b^3)) A = matrix(S, [[x*y^2, 2*x], [2, x^10*y]]); A A.charpoly('T')
- cholesky()[source]¶
Return the Cholesky decomposition of a Hermitian matrix.
Applies to a positive-definite matrix. Generally, the base ring for the entries of the matrix needs to be a subfield of the algebraic numbers (
QQbar). Examples include the rational numbers (QQ), some number fields, and real algebraic numbers and the algebraic numbers themselves. Symbolic matrices can also occasionally be factored.OUTPUT:
For a matrix \(A\) the routine returns a lower triangular matrix \(L\) such that,
\[A = LL^\ast\]where \(L^\ast\) is the conjugate-transpose. If the matrix is not positive-definite (for example, if it is not Hermitian) then a
ValueErrorresults.If possible, the output matrix will be over the fraction field of the base ring of the input matrix. If that fraction field is missing the requisite square roots but if no imaginaries are encountered, then the algebraic-reals will be used. Otherwise, the algebraic closure of the fraction field (typically
QQbar) will be used.ALGORITHM:
First we ensure that the matrix \(A\)
is_hermitian(). Afterwards, we attempt to compute a classicalblock_ldlt()factorization, \(A = LDL^{*}\), of the matrix. If that fails, then the matrix was not positive-definite and an error is raised. Otherwise we take the entrywise square-root \(\sqrt{D}\) of the diagonal matrix \(D\) (whose entries are the positive eigenvalues of the original matrix) to obtain the Cholesky factorization \(A = \left(L\sqrt{D}\right)\left(L\sqrt{D}\right)^{*}\). If the necessary square roots cannot be taken in the fraction field of original base ring, then we move to either its algebraic closure or the algebraic reals, depending on whether or not imaginary numbers are required.EXAMPLES:
This simple example has a result with entries that remain in the field of rational numbers:
sage: A = matrix(QQ, [[ 4, -2, 4, 2], ....: [-2, 10, -2, -7], ....: [ 4, -2, 8, 4], ....: [ 2, -7, 4, 7]]) sage: A.is_symmetric() True sage: L = A.cholesky(); L [ 2 0 0 0] [-1 3 0 0] [ 2 0 2 0] [ 1 -2 1 1] sage: L.parent() Full MatrixSpace of 4 by 4 dense matrices over Rational Field sage: L*L.transpose() == A True
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(4), -Integer(2), Integer(4), Integer(2)], ... [-Integer(2), Integer(10), -Integer(2), -Integer(7)], ... [ Integer(4), -Integer(2), Integer(8), Integer(4)], ... [ Integer(2), -Integer(7), Integer(4), Integer(7)]]) >>> A.is_symmetric() True >>> L = A.cholesky(); L [ 2 0 0 0] [-1 3 0 0] [ 2 0 2 0] [ 1 -2 1 1] >>> L.parent() Full MatrixSpace of 4 by 4 dense matrices over Rational Field >>> L*L.transpose() == A True
A = matrix(QQ, [[ 4, -2, 4, 2], [-2, 10, -2, -7], [ 4, -2, 8, 4], [ 2, -7, 4, 7]]) A.is_symmetric() L = A.cholesky(); L L.parent() L*L.transpose() == AThis seemingly simple example requires first moving to the rational numbers for field operations, and then square roots necessitate that the result has entries in the field of algebraic numbers:
sage: A = matrix(ZZ, [[ 78, -30, -37, -2], ....: [-30, 102, 179, -18], ....: [-37, 179, 326, -38], ....: [ -2, -18, -38, 15]]) sage: A.is_symmetric() True sage: L = A.cholesky(); L # needs sage.rings.number_field [ 8.83176086632785? 0 0 0] [ -3.396831102433787? 9.51112708681461? 0 0] [ -4.189425026335004? 17.32383862241232? 2.886751345948129? 0] [-0.2264554068289192? -1.973397116652010? -1.649572197684645? 2.886751345948129?] sage: L.parent() # needs sage.rings.number_field Full MatrixSpace of 4 by 4 dense matrices over Algebraic Real Field sage: L*L.transpose() == A # needs sage.rings.number_field True
>>> from sage.all import * >>> A = matrix(ZZ, [[ Integer(78), -Integer(30), -Integer(37), -Integer(2)], ... [-Integer(30), Integer(102), Integer(179), -Integer(18)], ... [-Integer(37), Integer(179), Integer(326), -Integer(38)], ... [ -Integer(2), -Integer(18), -Integer(38), Integer(15)]]) >>> A.is_symmetric() True >>> L = A.cholesky(); L # needs sage.rings.number_field [ 8.83176086632785? 0 0 0] [ -3.396831102433787? 9.51112708681461? 0 0] [ -4.189425026335004? 17.32383862241232? 2.886751345948129? 0] [-0.2264554068289192? -1.973397116652010? -1.649572197684645? 2.886751345948129?] >>> L.parent() # needs sage.rings.number_field Full MatrixSpace of 4 by 4 dense matrices over Algebraic Real Field >>> L*L.transpose() == A # needs sage.rings.number_field True
A = matrix(ZZ, [[ 78, -30, -37, -2], [-30, 102, 179, -18], [-37, 179, 326, -38], [ -2, -18, -38, 15]]) A.is_symmetric() L = A.cholesky(); L # needs sage.rings.number_field L.parent() # needs sage.rings.number_field L*L.transpose() == A # needs sage.rings.number_fieldSome subfields of the complex numbers, such as this number field of complex numbers with rational real and imaginary parts, allow for this computation:
sage: # needs sage.rings.number_field sage: C.<I> = QuadraticField(-1) sage: A = matrix(C, [[ 23, 17*I + 3, 24*I + 25, 21*I], ....: [ -17*I + 3, 38, -69*I + 89, 7*I + 15], ....: [-24*I + 25, 69*I + 89, 976, 24*I + 6], ....: [ -21*I, -7*I + 15, -24*I + 6, 28]]) sage: A.is_hermitian() True sage: L = A.cholesky(); L [ 4.79...? 0 0 0] [ 0.62...? - 3.54...?*I 5.00...? 0 0] [ 5.21...? - 5.00...?*I 13.58...? + 10.72...?*I 24.98...? 0] [ -4.37...?*I -0.10...? - 0.85...?*I -0.21...? + 0.37...?*I 2.81...?] sage: L.parent() Full MatrixSpace of 4 by 4 dense matrices over Algebraic Field sage: (L*L.conjugate_transpose() - A.change_ring(QQbar)).norm() < 10^-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> C = QuadraticField(-Integer(1), names=('I',)); (I,) = C._first_ngens(1) >>> A = matrix(C, [[ Integer(23), Integer(17)*I + Integer(3), Integer(24)*I + Integer(25), Integer(21)*I], ... [ -Integer(17)*I + Integer(3), Integer(38), -Integer(69)*I + Integer(89), Integer(7)*I + Integer(15)], ... [-Integer(24)*I + Integer(25), Integer(69)*I + Integer(89), Integer(976), Integer(24)*I + Integer(6)], ... [ -Integer(21)*I, -Integer(7)*I + Integer(15), -Integer(24)*I + Integer(6), Integer(28)]]) >>> A.is_hermitian() True >>> L = A.cholesky(); L [ 4.79...? 0 0 0] [ 0.62...? - 3.54...?*I 5.00...? 0 0] [ 5.21...? - 5.00...?*I 13.58...? + 10.72...?*I 24.98...? 0] [ -4.37...?*I -0.10...? - 0.85...?*I -0.21...? + 0.37...?*I 2.81...?] >>> L.parent() Full MatrixSpace of 4 by 4 dense matrices over Algebraic Field >>> (L*L.conjugate_transpose() - A.change_ring(QQbar)).norm() < Integer(10)**-Integer(10) True
# needs sage.rings.number_field C.<I> = QuadraticField(-1) A = matrix(C, [[ 23, 17*I + 3, 24*I + 25, 21*I], [ -17*I + 3, 38, -69*I + 89, 7*I + 15], [-24*I + 25, 69*I + 89, 976, 24*I + 6], [ -21*I, -7*I + 15, -24*I + 6, 28]]) A.is_hermitian() L = A.cholesky(); L L.parent() (L*L.conjugate_transpose() - A.change_ring(QQbar)).norm() < 10^-10The field of algebraic numbers is an ideal setting for this computation:
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[ 2, 4 + 2*I, 6 - 4*I], ....: [ -2*I + 4, 11, 10 - 12*I], ....: [ 4*I + 6, 10 + 12*I, 37]]) sage: A.is_hermitian() True sage: L = A.cholesky() sage: L [ 1.414213562373095? 0 0] [2.828427124746190? - 1.414213562373095?*I 1 0] [4.242640687119285? + 2.828427124746190?*I -2*I + 2 1.732050807568878?] sage: L.parent() Full MatrixSpace of 3 by 3 dense matrices over Algebraic Field sage: L*L.conjugate_transpose() == A True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[ Integer(2), Integer(4) + Integer(2)*I, Integer(6) - Integer(4)*I], ... [ -Integer(2)*I + Integer(4), Integer(11), Integer(10) - Integer(12)*I], ... [ Integer(4)*I + Integer(6), Integer(10) + Integer(12)*I, Integer(37)]]) >>> A.is_hermitian() True >>> L = A.cholesky() >>> L [ 1.414213562373095? 0 0] [2.828427124746190? - 1.414213562373095?*I 1 0] [4.242640687119285? + 2.828427124746190?*I -2*I + 2 1.732050807568878?] >>> L.parent() Full MatrixSpace of 3 by 3 dense matrices over Algebraic Field >>> L*L.conjugate_transpose() == A True
# needs sage.rings.number_field A = matrix(QQbar, [[ 2, 4 + 2*I, 6 - 4*I], [ -2*I + 4, 11, 10 - 12*I], [ 4*I + 6, 10 + 12*I, 37]]) A.is_hermitian() L = A.cholesky() L L.parent() L*L.conjugate_transpose() == AResults are cached, hence immutable. Use the
copyfunction if you need to make a change:sage: A = matrix(QQ, [[ 4, -2, 4, 2], ....: [-2, 10, -2, -7], ....: [ 4, -2, 8, 4], ....: [ 2, -7, 4, 7]]) sage: L = A.cholesky() sage: L.is_immutable() True sage: from copy import copy sage: LC = copy(L) sage: LC[0,0] = 1000 sage: LC [1000 0 0 0] [ -1 3 0 0] [ 2 0 2 0] [ 1 -2 1 1]
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(4), -Integer(2), Integer(4), Integer(2)], ... [-Integer(2), Integer(10), -Integer(2), -Integer(7)], ... [ Integer(4), -Integer(2), Integer(8), Integer(4)], ... [ Integer(2), -Integer(7), Integer(4), Integer(7)]]) >>> L = A.cholesky() >>> L.is_immutable() True >>> from copy import copy >>> LC = copy(L) >>> LC[Integer(0),Integer(0)] = Integer(1000) >>> LC [1000 0 0 0] [ -1 3 0 0] [ 2 0 2 0] [ 1 -2 1 1]
A = matrix(QQ, [[ 4, -2, 4, 2], [-2, 10, -2, -7], [ 4, -2, 8, 4], [ 2, -7, 4, 7]]) L = A.cholesky() L.is_immutable() from copy import copy LC = copy(L) LC[0,0] = 1000 LCThe base ring need not be exact, although you should expect the result to be inexact (correct only in the norm) as well in that case:
sage: F = RealField(100) sage: A = A = matrix(F, [[1.0, 2.0], [2.0, 6.0]]) sage: L = A.cholesky(); L [ 1.000... 0.000...] [ 2.000... 1.414...] sage: (L*L.transpose() - A).norm() < 1e-10 # needs scipy True
>>> from sage.all import * >>> F = RealField(Integer(100)) >>> A = A = matrix(F, [[RealNumber('1.0'), RealNumber('2.0')], [RealNumber('2.0'), RealNumber('6.0')]]) >>> L = A.cholesky(); L [ 1.000... 0.000...] [ 2.000... 1.414...] >>> (L*L.transpose() - A).norm() < RealNumber('1e-10') # needs scipy True
F = RealField(100) A = A = matrix(F, [[1.0, 2.0], [2.0, 6.0]]) L = A.cholesky(); L (L*L.transpose() - A).norm() < 1e-10 # needs scipy
Even symbolic matrices can sometimes be factored:
sage: A = matrix(SR, [[pi,0], [0,pi]]) # needs sage.symbolic sage: A.cholesky() # needs sage.symbolic [sqrt(pi) 0] [ 0 sqrt(pi)]
>>> from sage.all import * >>> A = matrix(SR, [[pi,Integer(0)], [Integer(0),pi]]) # needs sage.symbolic >>> A.cholesky() # needs sage.symbolic [sqrt(pi) 0] [ 0 sqrt(pi)]
A = matrix(SR, [[pi,0], [0,pi]]) # needs sage.symbolic A.cholesky() # needs sage.symbolic
There are a variety of situations which will prevent the computation of a Cholesky decomposition.
The base ring may not be able to be viewed as a subset of the complex numbers, implying that “Hermitian” is meaningless:
sage: A = matrix(Integers(6), [[2, 0], [0, 4]]) sage: A.cholesky() Traceback (most recent call last): ... AttributeError: 'sage.rings.finite_rings.integer_mod.IntegerMod_int' object has no attribute 'conjugate'
>>> from sage.all import * >>> A = matrix(Integers(Integer(6)), [[Integer(2), Integer(0)], [Integer(0), Integer(4)]]) >>> A.cholesky() Traceback (most recent call last): ... AttributeError: 'sage.rings.finite_rings.integer_mod.IntegerMod_int' object has no attribute 'conjugate'
A = matrix(Integers(6), [[2, 0], [0, 4]]) A.cholesky()
The matrix may not be Hermitian:
sage: F.<a> = FiniteField(5^4) # needs sage.rings.finite_rings sage: A = matrix(F, [[2+a^3, 3], [3, 3]]) # needs sage.rings.finite_rings sage: A.cholesky() # needs sage.rings.finite_rings Traceback (most recent call last): ... ValueError: matrix is not Hermitian
>>> from sage.all import * >>> F = FiniteField(Integer(5)**Integer(4), names=('a',)); (a,) = F._first_ngens(1)# needs sage.rings.finite_rings >>> A = matrix(F, [[Integer(2)+a**Integer(3), Integer(3)], [Integer(3), Integer(3)]]) # needs sage.rings.finite_rings >>> A.cholesky() # needs sage.rings.finite_rings Traceback (most recent call last): ... ValueError: matrix is not Hermitian
F.<a> = FiniteField(5^4) # needs sage.rings.finite_rings A = matrix(F, [[2+a^3, 3], [3, 3]]) # needs sage.rings.finite_rings A.cholesky() # needs sage.rings.finite_rings
The matrix may not be positive-definite:
sage: # needs sage.rings.number_field sage: C.<I> = QuadraticField(-1) sage: B = matrix(C, [[ 2, 4 - 2*I, 2 + 2*I], ....: [4 + 2*I, 8, 10*I], ....: [2 - 2*I, -10*I, -3]]) sage: B.is_positive_definite() False sage: B.cholesky() Traceback (most recent call last): ... ValueError: matrix is not positive definite
>>> from sage.all import * >>> # needs sage.rings.number_field >>> C = QuadraticField(-Integer(1), names=('I',)); (I,) = C._first_ngens(1) >>> B = matrix(C, [[ Integer(2), Integer(4) - Integer(2)*I, Integer(2) + Integer(2)*I], ... [Integer(4) + Integer(2)*I, Integer(8), Integer(10)*I], ... [Integer(2) - Integer(2)*I, -Integer(10)*I, -Integer(3)]]) >>> B.is_positive_definite() False >>> B.cholesky() Traceback (most recent call last): ... ValueError: matrix is not positive definite
# needs sage.rings.number_field C.<I> = QuadraticField(-1) B = matrix(C, [[ 2, 4 - 2*I, 2 + 2*I], [4 + 2*I, 8, 10*I], [2 - 2*I, -10*I, -3]]) B.is_positive_definite() B.cholesky()sage: A = matrix(QQ, [[21, 15, 12, -3], ....: [15, 12, 9, 12], ....: [12, 9, 7, 3], ....: [-3, 12, 3, 8]]) sage: A.is_positive_definite() False sage: A.cholesky() Traceback (most recent call last): ... ValueError: matrix is not positive definite
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(21), Integer(15), Integer(12), -Integer(3)], ... [Integer(15), Integer(12), Integer(9), Integer(12)], ... [Integer(12), Integer(9), Integer(7), Integer(3)], ... [-Integer(3), Integer(12), Integer(3), Integer(8)]]) >>> A.is_positive_definite() False >>> A.cholesky() Traceback (most recent call last): ... ValueError: matrix is not positive definite
A = matrix(QQ, [[21, 15, 12, -3], [15, 12, 9, 12], [12, 9, 7, 3], [-3, 12, 3, 8]]) A.is_positive_definite() A.cholesky()>>> from sage.all import * >>> A = matrix(QQ, [[Integer(21), Integer(15), Integer(12), -Integer(3)], ... [Integer(15), Integer(12), Integer(9), Integer(12)], ... [Integer(12), Integer(9), Integer(7), Integer(3)], ... [-Integer(3), Integer(12), Integer(3), Integer(8)]]) >>> A.is_positive_definite() False >>> A.cholesky() Traceback (most recent call last): ... ValueError: matrix is not positive definite
A = matrix(QQ, [[21, 15, 12, -3], [15, 12, 9, 12], [12, 9, 7, 3], [-3, 12, 3, 8]]) A.is_positive_definite() A.cholesky()
- column_module()[source]¶
Return the free module over the base ring spanned by the columns of this matrix.
EXAMPLES:
sage: t = matrix(QQ, 3, 3, range(9)); t [0 1 2] [3 4 5] [6 7 8] sage: t.column_module() Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1] [ 0 1 2]
>>> from sage.all import * >>> t = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); t [0 1 2] [3 4 5] [6 7 8] >>> t.column_module() Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1] [ 0 1 2]
t = matrix(QQ, 3, 3, range(9)); t t.column_module()
- column_space()[source]¶
Return the vector space over the base ring spanned by the columns of this matrix.
EXAMPLES:
sage: M = MatrixSpace(QQ, 3, 3) sage: A = M([1,9,-7, 4/5,4,3, 6,4,3]) sage: A.column_space() Vector space of degree 3 and dimension 3 over Rational Field Basis matrix: [1 0 0] [0 1 0] [0 0 1] sage: # needs sage.rings.real_mpfr sage.symbolic sage: W = MatrixSpace(CC, 2, 2) sage: B = W([1, 2 + 3*I, 4 + 5*I, 9]); B [ 1.00000000000000 2.00000000000000 + 3.00000000000000*I] [4.00000000000000 + 5.00000000000000*I 9.00000000000000] sage: B.column_space() Vector space of degree 2 and dimension 2 over Complex Field with 53 bits of precision Basis matrix: [ 1.00000000000000 0.000000000000000] [0.000000000000000 1.00000000000000]
>>> from sage.all import * >>> M = MatrixSpace(QQ, Integer(3), Integer(3)) >>> A = M([Integer(1),Integer(9),-Integer(7), Integer(4)/Integer(5),Integer(4),Integer(3), Integer(6),Integer(4),Integer(3)]) >>> A.column_space() Vector space of degree 3 and dimension 3 over Rational Field Basis matrix: [1 0 0] [0 1 0] [0 0 1] >>> # needs sage.rings.real_mpfr sage.symbolic >>> W = MatrixSpace(CC, Integer(2), Integer(2)) >>> B = W([Integer(1), Integer(2) + Integer(3)*I, Integer(4) + Integer(5)*I, Integer(9)]); B [ 1.00000000000000 2.00000000000000 + 3.00000000000000*I] [4.00000000000000 + 5.00000000000000*I 9.00000000000000] >>> B.column_space() Vector space of degree 2 and dimension 2 over Complex Field with 53 bits of precision Basis matrix: [ 1.00000000000000 0.000000000000000] [0.000000000000000 1.00000000000000]
M = MatrixSpace(QQ, 3, 3) A = M([1,9,-7, 4/5,4,3, 6,4,3]) A.column_space() # needs sage.rings.real_mpfr sage.symbolic W = MatrixSpace(CC, 2, 2) B = W([1, 2 + 3*I, 4 + 5*I, 9]); B B.column_space()
- conjugate()[source]¶
Return the conjugate of self, i.e. the matrix whose entries are the conjugates of the entries of
self.EXAMPLES:
sage: # needs sage.rings.complex_double sage.symbolic sage: A = matrix(CDF, [[1+I,1],[0,2*I]]) sage: A.conjugate() [1.0 - 1.0*I 1.0] [ 0.0 -2.0*I]
>>> from sage.all import * >>> # needs sage.rings.complex_double sage.symbolic >>> A = matrix(CDF, [[Integer(1)+I,Integer(1)],[Integer(0),Integer(2)*I]]) >>> A.conjugate() [1.0 - 1.0*I 1.0] [ 0.0 -2.0*I]
# needs sage.rings.complex_double sage.symbolic A = matrix(CDF, [[1+I,1],[0,2*I]]) A.conjugate()
A matrix over a not-totally-real number field:
sage: x = polygen(ZZ, 'x') sage: K.<j> = NumberField(x^2 + 5) # needs sage.rings.number_field sage: M = matrix(K, [[1+j,1], [0,2*j]]) # needs sage.rings.number_field sage: M.conjugate() # needs sage.rings.number_field [-j + 1 1] [ 0 -2*j]
>>> from sage.all import * >>> x = polygen(ZZ, 'x') >>> K = NumberField(x**Integer(2) + Integer(5), names=('j',)); (j,) = K._first_ngens(1)# needs sage.rings.number_field >>> M = matrix(K, [[Integer(1)+j,Integer(1)], [Integer(0),Integer(2)*j]]) # needs sage.rings.number_field >>> M.conjugate() # needs sage.rings.number_field [-j + 1 1] [ 0 -2*j]
x = polygen(ZZ, 'x') K.<j> = NumberField(x^2 + 5) # needs sage.rings.number_field M = matrix(K, [[1+j,1], [0,2*j]]) # needs sage.rings.number_field M.conjugate() # needs sage.rings.number_field
There is a shortcut for the conjugate:
sage: M.C # needs sage.rings.number_field [-j + 1 1] [ 0 -2*j]
>>> from sage.all import * >>> M.C # needs sage.rings.number_field [-j + 1 1] [ 0 -2*j]
M.C # needs sage.rings.number_field
There is also a shortcut for the conjugate transpose, or “Hermitian transpose”:
sage: M.H # needs sage.rings.number_field [-j + 1 0] [ 1 -2*j]
>>> from sage.all import * >>> M.H # needs sage.rings.number_field [-j + 1 0] [ 1 -2*j]
M.H # needs sage.rings.number_field
Conjugates work (trivially) for matrices over rings that embed canonically into the real numbers:
sage: M = random_matrix(ZZ, 2) sage: M == M.conjugate() True sage: M = random_matrix(QQ, 3) sage: M == M.conjugate() True sage: M = random_matrix(RR, 2) sage: M == M.conjugate() True
>>> from sage.all import * >>> M = random_matrix(ZZ, Integer(2)) >>> M == M.conjugate() True >>> M = random_matrix(QQ, Integer(3)) >>> M == M.conjugate() True >>> M = random_matrix(RR, Integer(2)) >>> M == M.conjugate() True
M = random_matrix(ZZ, 2) M == M.conjugate() M = random_matrix(QQ, 3) M == M.conjugate() M = random_matrix(RR, 2) M == M.conjugate()
- conjugate_transpose()[source]¶
Return the transpose of
selfafter each entry has been converted to its complex conjugate.Note
This function is sometimes known as the “adjoint” of a matrix, though there is substantial variation and some confusion with the use of that term.
OUTPUT:
A matrix formed by taking the complex conjugate of every entry of
selfand then transposing the resulting matrix.Complex conjugation is implemented for many subfields of the complex numbers. See the examples below, or more at
conjugate().EXAMPLES:
sage: M = matrix(SR, 2, 2, [[2-I, 3+4*I], [9-6*I, 5*I]]) # needs sage.symbolic sage: M.base_ring() # needs sage.symbolic Symbolic Ring sage: M.conjugate_transpose() # needs sage.symbolic [ I + 2 6*I + 9] [-4*I + 3 -5*I] sage: # needs sage.rings.real_mpfr sage.symbolic sage: P = matrix(CC, 3, 2, [0.95-0.63*I, 0.84+0.13*I, ....: 0.94+0.23*I, 0.23+0.59*I, ....: 0.52-0.41*I, -0.50+0.90*I]) sage: P.base_ring() Complex Field with 53 bits of precision sage: P.conjugate_transpose() [ 0.950... + 0.630...*I 0.940... - 0.230...*I 0.520... + 0.410...*I] [ 0.840... - 0.130...*I 0.230... - 0.590...*I -0.500... - 0.900...*I]
>>> from sage.all import * >>> M = matrix(SR, Integer(2), Integer(2), [[Integer(2)-I, Integer(3)+Integer(4)*I], [Integer(9)-Integer(6)*I, Integer(5)*I]]) # needs sage.symbolic >>> M.base_ring() # needs sage.symbolic Symbolic Ring >>> M.conjugate_transpose() # needs sage.symbolic [ I + 2 6*I + 9] [-4*I + 3 -5*I] >>> # needs sage.rings.real_mpfr sage.symbolic >>> P = matrix(CC, Integer(3), Integer(2), [RealNumber('0.95')-RealNumber('0.63')*I, RealNumber('0.84')+RealNumber('0.13')*I, ... RealNumber('0.94')+RealNumber('0.23')*I, RealNumber('0.23')+RealNumber('0.59')*I, ... RealNumber('0.52')-RealNumber('0.41')*I, -RealNumber('0.50')+RealNumber('0.90')*I]) >>> P.base_ring() Complex Field with 53 bits of precision >>> P.conjugate_transpose() [ 0.950... + 0.630...*I 0.940... - 0.230...*I 0.520... + 0.410...*I] [ 0.840... - 0.130...*I 0.230... - 0.590...*I -0.500... - 0.900...*I]
M = matrix(SR, 2, 2, [[2-I, 3+4*I], [9-6*I, 5*I]]) # needs sage.symbolic M.base_ring() # needs sage.symbolic M.conjugate_transpose() # needs sage.symbolic # needs sage.rings.real_mpfr sage.symbolic P = matrix(CC, 3, 2, [0.95-0.63*I, 0.84+0.13*I, 0.94+0.23*I, 0.23+0.59*I, 0.52-0.41*I, -0.50+0.90*I]) P.base_ring() P.conjugate_transpose()There is also a shortcut for the conjugate transpose, or “Hermitian transpose”:
sage: M.H # needs sage.symbolic [ I + 2 6*I + 9] [-4*I + 3 -5*I]
>>> from sage.all import * >>> M.H # needs sage.symbolic [ I + 2 6*I + 9] [-4*I + 3 -5*I]
M.H # needs sage.symbolic
Matrices over base rings that can be embedded in the real numbers will behave as expected.
sage: P = random_matrix(QQ, 3, 4) sage: P.conjugate_transpose() == P.transpose() True
>>> from sage.all import * >>> P = random_matrix(QQ, Integer(3), Integer(4)) >>> P.conjugate_transpose() == P.transpose() True
P = random_matrix(QQ, 3, 4) P.conjugate_transpose() == P.transpose()
The conjugate of a matrix is formed by taking conjugates of all the entries. Some specialized subfields of the complex numbers are implemented in Sage and complex conjugation can be applied. (Matrices over quadratic number fields are another class of examples.)
sage: # needs sage.rings.number_field sage: C = CyclotomicField(5) sage: a = C.gen(); a zeta5 sage: CC(a) 0.309016994374947 + 0.951056516295154*I sage: M = matrix(C, 1, 2, [a^2, a+a^3]) sage: M.conjugate_transpose() [ zeta5^3] [-zeta5^3 - zeta5 - 1]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> C = CyclotomicField(Integer(5)) >>> a = C.gen(); a zeta5 >>> CC(a) 0.309016994374947 + 0.951056516295154*I >>> M = matrix(C, Integer(1), Integer(2), [a**Integer(2), a+a**Integer(3)]) >>> M.conjugate_transpose() [ zeta5^3] [-zeta5^3 - zeta5 - 1]
# needs sage.rings.number_field C = CyclotomicField(5) a = C.gen(); a CC(a) M = matrix(C, 1, 2, [a^2, a+a^3]) M.conjugate_transpose()
Furthermore, this method can be applied to matrices over quadratic extensions of finite fields:
sage: F.<a> = GF(9,'a') # needs sage.rings.finite_rings sage: N = matrix(F, 2, [0,a,-a,1]); N # needs sage.rings.finite_rings [ 0 a] [2*a 1] sage: N.conjugate_transpose() # needs sage.rings.finite_rings [ 0 a + 2] [2*a + 1 1]
>>> from sage.all import * >>> F = GF(Integer(9),'a', names=('a',)); (a,) = F._first_ngens(1)# needs sage.rings.finite_rings >>> N = matrix(F, Integer(2), [Integer(0),a,-a,Integer(1)]); N # needs sage.rings.finite_rings [ 0 a] [2*a 1] >>> N.conjugate_transpose() # needs sage.rings.finite_rings [ 0 a + 2] [2*a + 1 1]
F.<a> = GF(9,'a') # needs sage.rings.finite_rings N = matrix(F, 2, [0,a,-a,1]); N # needs sage.rings.finite_rings N.conjugate_transpose() # needs sage.rings.finite_rings
Conjugation does not make sense over rings not containing complex numbers or finite fields which are not a quadratic extension:
sage: N = matrix(GF(5), 2, [0,1,2,3]) sage: N.conjugate_transpose() Traceback (most recent call last): ... AttributeError: 'sage.rings.finite_rings.integer_mod.IntegerMod_int' object has no attribute 'conjugate'...
>>> from sage.all import * >>> N = matrix(GF(Integer(5)), Integer(2), [Integer(0),Integer(1),Integer(2),Integer(3)]) >>> N.conjugate_transpose() Traceback (most recent call last): ... AttributeError: 'sage.rings.finite_rings.integer_mod.IntegerMod_int' object has no attribute 'conjugate'...
N = matrix(GF(5), 2, [0,1,2,3]) N.conjugate_transpose()
- cyclic_subspace(v, var=None, basis='echelon')[source]¶
Create a cyclic subspace for a vector, and optionally, a minimal polynomial for the iterated powers.
These subspaces are also known as Krylov subspaces. They are spanned by the vectors
\[\{v, Av, A^2v, A^3v, \dots \}\]INPUT:
self– a square matrix with entries from a fieldv– a vector with a degree equal to the size of the matrix and entries compatible with the entries of the matrixvar– (default:None) if specified as a string or a generator of a polynomial ring, then this will be used to construct a polynomial reflecting a relation of linear dependence on the powers \(A^iv\) and this will cause the polynomial to be returned along with the subspace. A generator must create polynomials with coefficients from the same field as the matrix entries.basis– (default:echelon) the basis for the subspace is “echelonized” by default, but the keyword ‘iterates’ will return a subspace with a user basis equal to the largest linearly independent set \(\{v, Av, A^2v, A^3v, \dots, A^{k-1}v \}\).
OUTPUT:
Suppose \(k\) is the smallest power such that \(\{v, Av, A^2v, A^3v, \dots, A^{k}v \}\) is linearly dependent. Then the subspace returned will have dimension \(k\) and be spanned by the powers \(0\) through \(k-1\).
If a polynomial is requested through the use of the
varkeyword, then a pair is returned, with the polynomial first and the subspace second. The polynomial is the unique monic polynomial whose coefficients provide a relation of linear dependence on the first \(k\) powers.For less convenient, but more flexible output, see the helper method “_cyclic_subspace” in this module.
EXAMPLES:
sage: A = matrix(QQ, [[5,4,2,1],[0,1,-1,-1],[-1,-1,3,0],[1,1,-1,2]]) sage: v = vector(QQ, [0,1,0,0]) sage: E = A.cyclic_subspace(v); E Vector space of degree 4 and dimension 3 over Rational Field Basis matrix: [ 1 0 0 0] [ 0 1 0 0] [ 0 0 1 -1] sage: F = A.cyclic_subspace(v, basis='iterates'); F Vector space of degree 4 and dimension 3 over Rational Field User basis matrix: [ 0 1 0 0] [ 4 1 -1 1] [23 1 -8 8] sage: E == F True sage: p, S = A.cyclic_subspace(v, var='T'); p T^3 - 9*T^2 + 24*T - 16 sage: p.degree() == E.dimension() True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(5),Integer(4),Integer(2),Integer(1)],[Integer(0),Integer(1),-Integer(1),-Integer(1)],[-Integer(1),-Integer(1),Integer(3),Integer(0)],[Integer(1),Integer(1),-Integer(1),Integer(2)]]) >>> v = vector(QQ, [Integer(0),Integer(1),Integer(0),Integer(0)]) >>> E = A.cyclic_subspace(v); E Vector space of degree 4 and dimension 3 over Rational Field Basis matrix: [ 1 0 0 0] [ 0 1 0 0] [ 0 0 1 -1] >>> F = A.cyclic_subspace(v, basis='iterates'); F Vector space of degree 4 and dimension 3 over Rational Field User basis matrix: [ 0 1 0 0] [ 4 1 -1 1] [23 1 -8 8] >>> E == F True >>> p, S = A.cyclic_subspace(v, var='T'); p T^3 - 9*T^2 + 24*T - 16 >>> p.degree() == E.dimension() True
A = matrix(QQ, [[5,4,2,1],[0,1,-1,-1],[-1,-1,3,0],[1,1,-1,2]]) v = vector(QQ, [0,1,0,0]) E = A.cyclic_subspace(v); E F = A.cyclic_subspace(v, basis='iterates'); F E == F p, S = A.cyclic_subspace(v, var='T'); p p.degree() == E.dimension()
The polynomial has coefficients that yield a non-trivial relation of linear dependence on the iterates. Or, equivalently, evaluating the polynomial with the matrix will create a matrix that annihilates the vector.
sage: A = matrix(QQ, [[15, 37/3, -16, -104/3, -29, -7/3, 35, 2/3, -29/3, -1/3], ....: [ 2, 9, -1, -6, -6, 0, 7, 0, -2, 0], ....: [24, 74/3, -29, -208/3, -58, -14/3, 70, 4/3, -58/3, -2/3], ....: [-6, -19, 3, 21, 19, 0, -21, 0, 6, 0], ....: [2, 6, -1, -6, -3, 0, 7, 0, -2, 0], ....: [-96, -296/3, 128, 832/3, 232, 65/3, -279, -16/3, 232/3, 8/3], ....: [0, 0, 0, 0, 0, 0, 3, 0, 0, 0], ....: [20, 26/3, -30, -199/3, -42, -14/3, 70, 13/3, -55/3, -2/3], ....: [18, 57, -9, -54, -57, 0, 63, 0, -15, 0], ....: [0, 0, 0, 0, 0, 0, 0, 0, 0, 3]]) sage: u = zero_vector(QQ, 10); u[0] = 1 sage: p, S = A.cyclic_subspace(u, var='t', basis='iterates') sage: S Vector space of degree 10 and dimension 3 over Rational Field User basis matrix: [ 1 0 0 0 0 0 0 0 0 0] [ 15 2 24 -6 2 -96 0 20 18 0] [ 79 12 140 -36 12 -560 0 116 108 0] sage: p t^3 - 9*t^2 + 27*t - 27 sage: k = p.degree() sage: coeffs = p.list() sage: iterates = S.basis() + [A^k*u] sage: sum(coeffs[i]*iterates[i] for i in range(k+1)) (0, 0, 0, 0, 0, 0, 0, 0, 0, 0) sage: u in p(A).right_kernel() True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(15), Integer(37)/Integer(3), -Integer(16), -Integer(104)/Integer(3), -Integer(29), -Integer(7)/Integer(3), Integer(35), Integer(2)/Integer(3), -Integer(29)/Integer(3), -Integer(1)/Integer(3)], ... [ Integer(2), Integer(9), -Integer(1), -Integer(6), -Integer(6), Integer(0), Integer(7), Integer(0), -Integer(2), Integer(0)], ... [Integer(24), Integer(74)/Integer(3), -Integer(29), -Integer(208)/Integer(3), -Integer(58), -Integer(14)/Integer(3), Integer(70), Integer(4)/Integer(3), -Integer(58)/Integer(3), -Integer(2)/Integer(3)], ... [-Integer(6), -Integer(19), Integer(3), Integer(21), Integer(19), Integer(0), -Integer(21), Integer(0), Integer(6), Integer(0)], ... [Integer(2), Integer(6), -Integer(1), -Integer(6), -Integer(3), Integer(0), Integer(7), Integer(0), -Integer(2), Integer(0)], ... [-Integer(96), -Integer(296)/Integer(3), Integer(128), Integer(832)/Integer(3), Integer(232), Integer(65)/Integer(3), -Integer(279), -Integer(16)/Integer(3), Integer(232)/Integer(3), Integer(8)/Integer(3)], ... [Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(3), Integer(0), Integer(0), Integer(0)], ... [Integer(20), Integer(26)/Integer(3), -Integer(30), -Integer(199)/Integer(3), -Integer(42), -Integer(14)/Integer(3), Integer(70), Integer(13)/Integer(3), -Integer(55)/Integer(3), -Integer(2)/Integer(3)], ... [Integer(18), Integer(57), -Integer(9), -Integer(54), -Integer(57), Integer(0), Integer(63), Integer(0), -Integer(15), Integer(0)], ... [Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(0), Integer(3)]]) >>> u = zero_vector(QQ, Integer(10)); u[Integer(0)] = Integer(1) >>> p, S = A.cyclic_subspace(u, var='t', basis='iterates') >>> S Vector space of degree 10 and dimension 3 over Rational Field User basis matrix: [ 1 0 0 0 0 0 0 0 0 0] [ 15 2 24 -6 2 -96 0 20 18 0] [ 79 12 140 -36 12 -560 0 116 108 0] >>> p t^3 - 9*t^2 + 27*t - 27 >>> k = p.degree() >>> coeffs = p.list() >>> iterates = S.basis() + [A**k*u] >>> sum(coeffs[i]*iterates[i] for i in range(k+Integer(1))) (0, 0, 0, 0, 0, 0, 0, 0, 0, 0) >>> u in p(A).right_kernel() True
A = matrix(QQ, [[15, 37/3, -16, -104/3, -29, -7/3, 35, 2/3, -29/3, -1/3], [ 2, 9, -1, -6, -6, 0, 7, 0, -2, 0], [24, 74/3, -29, -208/3, -58, -14/3, 70, 4/3, -58/3, -2/3], [-6, -19, 3, 21, 19, 0, -21, 0, 6, 0], [2, 6, -1, -6, -3, 0, 7, 0, -2, 0], [-96, -296/3, 128, 832/3, 232, 65/3, -279, -16/3, 232/3, 8/3], [0, 0, 0, 0, 0, 0, 3, 0, 0, 0], [20, 26/3, -30, -199/3, -42, -14/3, 70, 13/3, -55/3, -2/3], [18, 57, -9, -54, -57, 0, 63, 0, -15, 0], [0, 0, 0, 0, 0, 0, 0, 0, 0, 3]]) u = zero_vector(QQ, 10); u[0] = 1 p, S = A.cyclic_subspace(u, var='t', basis='iterates') S p k = p.degree() coeffs = p.list() iterates = S.basis() + [A^k*u] sum(coeffs[i]*iterates[i] for i in range(k+1)) u in p(A).right_kernel()
- decomposition(algorithm='spin', is_diagonalizable=False, dual=False)[source]¶
Return the decomposition of the free module on which this matrix A acts from the right (i.e., the action is x goes to x A), along with whether this matrix acts irreducibly on each factor. The factors are guaranteed to be sorted in the same way as the corresponding factors of the characteristic polynomial.
Let A be the matrix acting from the on the vector space V of column vectors. Assume that A is square. This function computes maximal subspaces W_1, …, W_n corresponding to Galois conjugacy classes of eigenvalues of A. More precisely, let \(f(X)\) be the characteristic polynomial of A. This function computes the subspace \(W_i = ker(g_(A)^n)\), where \(g_i(X)\) is an irreducible factor of \(f(X)\) and \(g_i(X)\) exactly divides \(f(X)\). If the optional parameter is_diagonalizable is True, then we let \(W_i = ker(g(A))\), since then we know that \(ker(g(A)) = ker(g(A)^n)\).
INPUT:
self– a matrixalgorithm– string (default:'spin');'spin': involves iterating the action ofselfon a vector.'kernel': naively just compute \(ker(f_i(A))\) for each factor \(f_i\).dual– boolean (default:False); if True, also returns the corresponding decomposition of V under the action of the transpose of A. The factors are guaranteed to correspond.is_diagonalizable– if the matrix is known to be diagonalizable, set this to True, which might speed up the algorithm in some cases.
Note
If the base ring is not a field, the kernel algorithm is used.
OUTPUT:
Sequence– list of pairs (V,t), where V is a vector spaces and t is a boolean, and t isTrueexactly when the charpoly ofselfon V is irreducible.(optional) list – list of pairs (W,t), where W is a vector space and t is a boolean, and t is
Trueexactly when the charpoly of the transpose ofselfon W is irreducible.
EXAMPLES:
sage: A = matrix(ZZ, 4, [3,4,5,6, 7,3,8,10, 14,5,6,7, 2,2,10,9]) sage: B = matrix(QQ, 6, 6, range(36)) sage: B*11 [ 0 11 22 33 44 55] [ 66 77 88 99 110 121] [132 143 154 165 176 187] [198 209 220 231 242 253] [264 275 286 297 308 319] [330 341 352 363 374 385] sage: A.decomposition() # needs sage.libs.pari [ (Ambient free module of rank 4 over the principal ideal domain Integer Ring, True) ] sage: B.decomposition() # needs sage.libs.pari [ (Vector space of degree 6 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1 -2 -3 -4] [ 0 1 2 3 4 5], True), (Vector space of degree 6 and dimension 4 over Rational Field Basis matrix: [ 1 0 0 0 -5 4] [ 0 1 0 0 -4 3] [ 0 0 1 0 -3 2] [ 0 0 0 1 -2 1], False) ]
>>> from sage.all import * >>> A = matrix(ZZ, Integer(4), [Integer(3),Integer(4),Integer(5),Integer(6), Integer(7),Integer(3),Integer(8),Integer(10), Integer(14),Integer(5),Integer(6),Integer(7), Integer(2),Integer(2),Integer(10),Integer(9)]) >>> B = matrix(QQ, Integer(6), Integer(6), range(Integer(36))) >>> B*Integer(11) [ 0 11 22 33 44 55] [ 66 77 88 99 110 121] [132 143 154 165 176 187] [198 209 220 231 242 253] [264 275 286 297 308 319] [330 341 352 363 374 385] >>> A.decomposition() # needs sage.libs.pari [ (Ambient free module of rank 4 over the principal ideal domain Integer Ring, True) ] >>> B.decomposition() # needs sage.libs.pari [ (Vector space of degree 6 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1 -2 -3 -4] [ 0 1 2 3 4 5], True), (Vector space of degree 6 and dimension 4 over Rational Field Basis matrix: [ 1 0 0 0 -5 4] [ 0 1 0 0 -4 3] [ 0 0 1 0 -3 2] [ 0 0 0 1 -2 1], False) ]
A = matrix(ZZ, 4, [3,4,5,6, 7,3,8,10, 14,5,6,7, 2,2,10,9]) B = matrix(QQ, 6, 6, range(36)) B*11 A.decomposition() # needs sage.libs.pari B.decomposition() # needs sage.libs.pari
- decomposition_of_subspace(M, check_restrict=True, **kwds)[source]¶
Suppose the right action of
selfon M leaves M invariant. Return the decomposition of M as a list of pairs (W, is_irred) where is_irred isTrueif the charpoly ofselfacting on the factor W is irreducible.Additional inputs besides M are passed onto the decomposition command.
INPUT:
M– a subspace of the free moduleselfacts oncheck_restrict– boolean (default:True); call restrict with or without checkkwds– keywords that will be forwarded todecomposition()
EXAMPLES:
sage: # needs sage.libs.pari sage: t = matrix(QQ, 3, [3, 0, -2, 0, -2, 0, 0, 0, 0]); t [ 3 0 -2] [ 0 -2 0] [ 0 0 0] sage: t.fcp('X') # factored charpoly (X - 3) * X * (X + 2) sage: v = kernel(t*(t+2)); v # an invariant subspace Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [0 1 0] [0 0 1] sage: D = t.decomposition_of_subspace(v); D [ (Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [0 0 1], True), (Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [0 1 0], True) ] sage: t.restrict(D[0][0]) [0] sage: t.restrict(D[1][0]) [-2]
>>> from sage.all import * >>> # needs sage.libs.pari >>> t = matrix(QQ, Integer(3), [Integer(3), Integer(0), -Integer(2), Integer(0), -Integer(2), Integer(0), Integer(0), Integer(0), Integer(0)]); t [ 3 0 -2] [ 0 -2 0] [ 0 0 0] >>> t.fcp('X') # factored charpoly (X - 3) * X * (X + 2) >>> v = kernel(t*(t+Integer(2))); v # an invariant subspace Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [0 1 0] [0 0 1] >>> D = t.decomposition_of_subspace(v); D [ (Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [0 0 1], True), (Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [0 1 0], True) ] >>> t.restrict(D[Integer(0)][Integer(0)]) [0] >>> t.restrict(D[Integer(1)][Integer(0)]) [-2]
# needs sage.libs.pari t = matrix(QQ, 3, [3, 0, -2, 0, -2, 0, 0, 0, 0]); t t.fcp('X') # factored charpoly v = kernel(t*(t+2)); v # an invariant subspace D = t.decomposition_of_subspace(v); D t.restrict(D[0][0]) t.restrict(D[1][0])We do a decomposition over ZZ:
sage: a = matrix(ZZ, 6, [0, 0, -2, 0, 2, 0, ....: 2, -4, -2, 0, 2, 0, ....: 0, 0, -2, -2, 0, 0, ....: 2, 0, -2, -4, 2, -2, ....: 0, 2, 0, -2, -2, 0, ....: 0, 2, 0, -2, 0, 0]) sage: a.decomposition_of_subspace(ZZ^6) # needs sage.libs.pari [ (Free module of degree 6 and rank 2 over Integer Ring Echelon basis matrix: [ 1 0 1 -1 1 -1] [ 0 1 0 -1 2 -1], False), (Free module of degree 6 and rank 4 over Integer Ring Echelon basis matrix: [ 1 0 -1 0 1 0] [ 0 1 0 0 0 0] [ 0 0 0 1 0 0] [ 0 0 0 0 0 1], False) ]
>>> from sage.all import * >>> a = matrix(ZZ, Integer(6), [Integer(0), Integer(0), -Integer(2), Integer(0), Integer(2), Integer(0), ... Integer(2), -Integer(4), -Integer(2), Integer(0), Integer(2), Integer(0), ... Integer(0), Integer(0), -Integer(2), -Integer(2), Integer(0), Integer(0), ... Integer(2), Integer(0), -Integer(2), -Integer(4), Integer(2), -Integer(2), ... Integer(0), Integer(2), Integer(0), -Integer(2), -Integer(2), Integer(0), ... Integer(0), Integer(2), Integer(0), -Integer(2), Integer(0), Integer(0)]) >>> a.decomposition_of_subspace(ZZ**Integer(6)) # needs sage.libs.pari [ (Free module of degree 6 and rank 2 over Integer Ring Echelon basis matrix: [ 1 0 1 -1 1 -1] [ 0 1 0 -1 2 -1], False), (Free module of degree 6 and rank 4 over Integer Ring Echelon basis matrix: [ 1 0 -1 0 1 0] [ 0 1 0 0 0 0] [ 0 0 0 1 0 0] [ 0 0 0 0 0 1], False) ]
a = matrix(ZZ, 6, [0, 0, -2, 0, 2, 0, 2, -4, -2, 0, 2, 0, 0, 0, -2, -2, 0, 0, 2, 0, -2, -4, 2, -2, 0, 2, 0, -2, -2, 0, 0, 2, 0, -2, 0, 0]) a.decomposition_of_subspace(ZZ^6) # needs sage.libs.pari
- denominator()[source]¶
Return the least common multiple of the denominators of the elements of
self.If there is no denominator function for the base field, or no LCM function for the denominators, raise a
TypeError.EXAMPLES:
sage: A = MatrixSpace(QQ, 2)([1/2, 1/3, 1/5, 1/7]) sage: A.denominator() 210
>>> from sage.all import * >>> A = MatrixSpace(QQ, Integer(2))([Integer(1)/Integer(2), Integer(1)/Integer(3), Integer(1)/Integer(5), Integer(1)/Integer(7)]) >>> A.denominator() 210
A = MatrixSpace(QQ, 2)([1/2, 1/3, 1/5, 1/7]) A.denominator()
A trivial example:
sage: A = matrix(QQ, 0,2) sage: A.denominator() 1
>>> from sage.all import * >>> A = matrix(QQ, Integer(0),Integer(2)) >>> A.denominator() 1
A = matrix(QQ, 0,2) A.denominator()
Denominators are not defined for real numbers:
sage: A = MatrixSpace(RealField(),2)([1,2,3,4]) sage: A.denominator() Traceback (most recent call last): ... TypeError: denominator not defined for elements of the base ring
>>> from sage.all import * >>> A = MatrixSpace(RealField(),Integer(2))([Integer(1),Integer(2),Integer(3),Integer(4)]) >>> A.denominator() Traceback (most recent call last): ... TypeError: denominator not defined for elements of the base ring
A = MatrixSpace(RealField(),2)([1,2,3,4]) A.denominator()
We can even compute the denominator of matrix over the fraction field of \(\ZZ[x]\).
sage: K.<x> = Frac(ZZ['x']) sage: A = MatrixSpace(K,2)([1/x, 2/(x+1), 1, 5/(x^3)]) sage: A.denominator() x^4 + x^3
>>> from sage.all import * >>> K = Frac(ZZ['x'], names=('x',)); (x,) = K._first_ngens(1) >>> A = MatrixSpace(K,Integer(2))([Integer(1)/x, Integer(2)/(x+Integer(1)), Integer(1), Integer(5)/(x**Integer(3))]) >>> A.denominator() x^4 + x^3
K.<x> = Frac(ZZ['x']) A = MatrixSpace(K,2)([1/x, 2/(x+1), 1, 5/(x^3)]) A.denominator()
Here’s an example involving a cyclotomic field:
sage: # needs sage.rings.number_field sage: K.<z> = CyclotomicField(3) sage: M = MatrixSpace(K, 3, sparse=True) sage: A = M([(1+z)/3, (2+z)/3, z/3, 1, 1+z, -2, 1, 5, -1+z]) sage: print(A) [1/3*z + 1/3 1/3*z + 2/3 1/3*z] [ 1 z + 1 -2] [ 1 5 z - 1] sage: print(A.denominator()) 3
>>> from sage.all import * >>> # needs sage.rings.number_field >>> K = CyclotomicField(Integer(3), names=('z',)); (z,) = K._first_ngens(1) >>> M = MatrixSpace(K, Integer(3), sparse=True) >>> A = M([(Integer(1)+z)/Integer(3), (Integer(2)+z)/Integer(3), z/Integer(3), Integer(1), Integer(1)+z, -Integer(2), Integer(1), Integer(5), -Integer(1)+z]) >>> print(A) [1/3*z + 1/3 1/3*z + 2/3 1/3*z] [ 1 z + 1 -2] [ 1 5 z - 1] >>> print(A.denominator()) 3
# needs sage.rings.number_field K.<z> = CyclotomicField(3) M = MatrixSpace(K, 3, sparse=True) A = M([(1+z)/3, (2+z)/3, z/3, 1, 1+z, -2, 1, 5, -1+z]) print(A) print(A.denominator())
- density()[source]¶
Return the density of the matrix.
By density we understand the ratio of the number of nonzero positions and the self.nrows() * self.ncols(), i.e. the number of possible nonzero positions.
EXAMPLES:
First, note that the density parameter does not ensure the density of a matrix, it is only an upper bound.
sage: A = random_matrix(GF(127), 200, 200, density=0.3) sage: A.density() <= 0.3 True
>>> from sage.all import * >>> A = random_matrix(GF(Integer(127)), Integer(200), Integer(200), density=RealNumber('0.3')) >>> A.density() <= RealNumber('0.3') True
A = random_matrix(GF(127), 200, 200, density=0.3) A.density() <= 0.3
sage: A = matrix(QQ, 3,3, [0,1,2,3,0,0,6,7,8]) sage: A.density() 2/3
>>> from sage.all import * >>> A = matrix(QQ, Integer(3),Integer(3), [Integer(0),Integer(1),Integer(2),Integer(3),Integer(0),Integer(0),Integer(6),Integer(7),Integer(8)]) >>> A.density() 2/3
A = matrix(QQ, 3,3, [0,1,2,3,0,0,6,7,8]) A.density()
>>> from sage.all import * >>> A = matrix(QQ, Integer(3),Integer(3), [Integer(0),Integer(1),Integer(2),Integer(3),Integer(0),Integer(0),Integer(6),Integer(7),Integer(8)]) >>> A.density() 2/3
A = matrix(QQ, 3,3, [0,1,2,3,0,0,6,7,8]) A.density()
sage: a = matrix([[],[],[],[]]) sage: a.density() 0
>>> from sage.all import * >>> a = matrix([[],[],[],[]]) >>> a.density() 0
a = matrix([[],[],[],[]]) a.density()
>>> from sage.all import * >>> a = matrix([[],[],[],[]]) >>> a.density() 0
a = matrix([[],[],[],[]]) a.density()
- derivative(*args)[source]¶
Derivative with respect to variables supplied in args.
Multiple variables and iteration counts may be supplied; see documentation for the global derivative() function for more details.
EXAMPLES:
sage: # needs sage.symbolic sage: v = vector([1,x,x^2]) sage: v.derivative(x) (0, 1, 2*x) sage: type(v.derivative(x)) == type(v) True sage: v = vector([1,x,x^2], sparse=True) sage: v.derivative(x) (0, 1, 2*x) sage: type(v.derivative(x)) == type(v) True sage: v.derivative(x,x) (0, 0, 2)
>>> from sage.all import * >>> # needs sage.symbolic >>> v = vector([Integer(1),x,x**Integer(2)]) >>> v.derivative(x) (0, 1, 2*x) >>> type(v.derivative(x)) == type(v) True >>> v = vector([Integer(1),x,x**Integer(2)], sparse=True) >>> v.derivative(x) (0, 1, 2*x) >>> type(v.derivative(x)) == type(v) True >>> v.derivative(x,x) (0, 0, 2)
# needs sage.symbolic v = vector([1,x,x^2]) v.derivative(x) type(v.derivative(x)) == type(v) v = vector([1,x,x^2], sparse=True) v.derivative(x) type(v.derivative(x)) == type(v) v.derivative(x,x)
- det(*args, **kwds)[source]¶
Synonym for self.determinant(…).
EXAMPLES:
sage: A = MatrixSpace(Integers(8), 3)([1,7,3, 1,1,1, 3,4,5]) sage: A.det() 6
>>> from sage.all import * >>> A = MatrixSpace(Integers(Integer(8)), Integer(3))([Integer(1),Integer(7),Integer(3), Integer(1),Integer(1),Integer(1), Integer(3),Integer(4),Integer(5)]) >>> A.det() 6
A = MatrixSpace(Integers(8), 3)([1,7,3, 1,1,1, 3,4,5]) A.det()
- determinant(algorithm=None)[source]¶
Return the determinant of
self.ALGORITHM:
If the base ring has a method
_matrix_determinant(), we call it.Otherwise, for small matrices (n less than 4), this is computed using the naive formula. In the specific case of matrices over the integers modulo a non-prime, the determinant of a lift is computed over the integers. In general, the characteristic polynomial is computed either using the Hessenberg form (specified by
'hessenberg') or the generic division-free algorithm (specified by'df'). When the base ring is an exact field, the default choice is'hessenberg', otherwise it is'df'. Note that for matrices over most rings, more sophisticated algorithms can be used. (TypeA.determinant?to see what is done for a specific matrixA.)INPUT:
algorithm– string; one of'df'– generic O(n^4) division-free algorithm'hessenberg'– use the Hessenberg form of the matrix
EXAMPLES:
sage: A = MatrixSpace(Integers(8), 3)([1,7,3, 1,1,1, 3,4,5]) sage: A.determinant() 6 sage: A.determinant() is A.determinant() True sage: A[0,0] = 10 sage: A.determinant() 7
>>> from sage.all import * >>> A = MatrixSpace(Integers(Integer(8)), Integer(3))([Integer(1),Integer(7),Integer(3), Integer(1),Integer(1),Integer(1), Integer(3),Integer(4),Integer(5)]) >>> A.determinant() 6 >>> A.determinant() is A.determinant() True >>> A[Integer(0),Integer(0)] = Integer(10) >>> A.determinant() 7
A = MatrixSpace(Integers(8), 3)([1,7,3, 1,1,1, 3,4,5]) A.determinant() A.determinant() is A.determinant() A[0,0] = 10 A.determinant()
We compute the determinant of the arbitrary 3x3 matrix:
sage: R = PolynomialRing(QQ, 9, 'x') sage: A = matrix(R, 3, R.gens()) sage: A [x0 x1 x2] [x3 x4 x5] [x6 x7 x8] sage: A.determinant() -x2*x4*x6 + x1*x5*x6 + x2*x3*x7 - x0*x5*x7 - x1*x3*x8 + x0*x4*x8
>>> from sage.all import * >>> R = PolynomialRing(QQ, Integer(9), 'x') >>> A = matrix(R, Integer(3), R.gens()) >>> A [x0 x1 x2] [x3 x4 x5] [x6 x7 x8] >>> A.determinant() -x2*x4*x6 + x1*x5*x6 + x2*x3*x7 - x0*x5*x7 - x1*x3*x8 + x0*x4*x8
R = PolynomialRing(QQ, 9, 'x') A = matrix(R, 3, R.gens()) A A.determinant()
We create a matrix over \(\ZZ[x,y]\) and compute its determinant.
sage: R.<x,y> = PolynomialRing(IntegerRing(), 2) sage: A = MatrixSpace(R,2)([x, y, x**2, y**2]) sage: A.determinant() -x^2*y + x*y^2
>>> from sage.all import * >>> R = PolynomialRing(IntegerRing(), Integer(2), names=('x', 'y',)); (x, y,) = R._first_ngens(2) >>> A = MatrixSpace(R,Integer(2))([x, y, x**Integer(2), y**Integer(2)]) >>> A.determinant() -x^2*y + x*y^2
R.<x,y> = PolynomialRing(IntegerRing(), 2) A = MatrixSpace(R,2)([x, y, x**2, y**2]) A.determinant()
A matrix over a non-domain:
sage: m = matrix(Integers(4), 2, [1,2,2,3]) sage: m.determinant() 3
>>> from sage.all import * >>> m = matrix(Integers(Integer(4)), Integer(2), [Integer(1),Integer(2),Integer(2),Integer(3)]) >>> m.determinant() 3
m = matrix(Integers(4), 2, [1,2,2,3]) m.determinant()
- diagonal()[source]¶
Return the diagonal entries of
self.OUTPUT:
A list containing the entries of the matrix that have equal row and column indices, in order of the indices. Behavior is not limited to square matrices.
EXAMPLES:
sage: A = matrix([[2,5], [3,7]]); A [2 5] [3 7] sage: A.diagonal() [2, 7]
>>> from sage.all import * >>> A = matrix([[Integer(2),Integer(5)], [Integer(3),Integer(7)]]); A [2 5] [3 7] >>> A.diagonal() [2, 7]
A = matrix([[2,5], [3,7]]); A A.diagonal()
Two rectangular matrices.
sage: B = matrix(3, 7, range(21)); B [ 0 1 2 3 4 5 6] [ 7 8 9 10 11 12 13] [14 15 16 17 18 19 20] sage: B.diagonal() [0, 8, 16] sage: C = matrix(3, 2, range(6)); C [0 1] [2 3] [4 5] sage: C.diagonal() [0, 3]
>>> from sage.all import * >>> B = matrix(Integer(3), Integer(7), range(Integer(21))); B [ 0 1 2 3 4 5 6] [ 7 8 9 10 11 12 13] [14 15 16 17 18 19 20] >>> B.diagonal() [0, 8, 16] >>> C = matrix(Integer(3), Integer(2), range(Integer(6))); C [0 1] [2 3] [4 5] >>> C.diagonal() [0, 3]
B = matrix(3, 7, range(21)); B B.diagonal() C = matrix(3, 2, range(6)); C C.diagonal()
Empty matrices behave properly.
sage: E = matrix(0, 5, []); E [] sage: E.diagonal() []
>>> from sage.all import * >>> E = matrix(Integer(0), Integer(5), []); E [] >>> E.diagonal() []
E = matrix(0, 5, []); E E.diagonal()
- diagonalization(base_field=None)[source]¶
Return a diagonal matrix similar to
selfalong with the transformation matrix.INPUT:
base_field– if given,selfis regarded as a matrix over it
OUTPUT: a diagonal matrix \(D\) and an invertible matrix \(P\) such that \(P^{-1}AP=D\), if
selfis a diagonalizable matrix \(A\).EXAMPLES:
sage: # needs sage.libs.pari sage: A = matrix(QQ, 4, [-4, 6, 3, 3, -3, 5, 3, 3, 3, -6, -4, -3, -3, 6, 3, 2]) sage: A [-4 6 3 3] [-3 5 3 3] [ 3 -6 -4 -3] [-3 6 3 2] sage: A.is_diagonalizable() True sage: A.diagonalization() ( [ 2 0 0 0] [ 1 1 0 0] [ 0 -1 0 0] [ 1 0 1 0] [ 0 0 -1 0] [-1 0 0 1] [ 0 0 0 -1], [ 1 1 -2 -1] ) sage: D, P = A.diagonalization() sage: P^-1*A*P == D True sage: # needs sage.libs.pari sage: A = matrix(QQ, 2, [0, 2, 1, 0]) sage: A.is_diagonalizable() False sage: A.is_diagonalizable(QQbar) # needs sage.rings.number_field True sage: D, P = A.diagonalization(QQbar) # needs sage.rings.number_field sage: P^-1*A*P == D # needs sage.rings.number_field True
>>> from sage.all import * >>> # needs sage.libs.pari >>> A = matrix(QQ, Integer(4), [-Integer(4), Integer(6), Integer(3), Integer(3), -Integer(3), Integer(5), Integer(3), Integer(3), Integer(3), -Integer(6), -Integer(4), -Integer(3), -Integer(3), Integer(6), Integer(3), Integer(2)]) >>> A [-4 6 3 3] [-3 5 3 3] [ 3 -6 -4 -3] [-3 6 3 2] >>> A.is_diagonalizable() True >>> A.diagonalization() ( [ 2 0 0 0] [ 1 1 0 0] [ 0 -1 0 0] [ 1 0 1 0] [ 0 0 -1 0] [-1 0 0 1] [ 0 0 0 -1], [ 1 1 -2 -1] ) >>> D, P = A.diagonalization() >>> P**-Integer(1)*A*P == D True >>> # needs sage.libs.pari >>> A = matrix(QQ, Integer(2), [Integer(0), Integer(2), Integer(1), Integer(0)]) >>> A.is_diagonalizable() False >>> A.is_diagonalizable(QQbar) # needs sage.rings.number_field True >>> D, P = A.diagonalization(QQbar) # needs sage.rings.number_field >>> P**-Integer(1)*A*P == D # needs sage.rings.number_field True
# needs sage.libs.pari A = matrix(QQ, 4, [-4, 6, 3, 3, -3, 5, 3, 3, 3, -6, -4, -3, -3, 6, 3, 2]) A A.is_diagonalizable() A.diagonalization() D, P = A.diagonalization() P^-1*A*P == D # needs sage.libs.pari A = matrix(QQ, 2, [0, 2, 1, 0]) A.is_diagonalizable() A.is_diagonalizable(QQbar) # needs sage.rings.number_field D, P = A.diagonalization(QQbar) # needs sage.rings.number_field P^-1*A*P == D # needs sage.rings.number_field
Matrices may fail to be diagonalizable for various reasons:
sage: A = matrix(QQ, 2, [1,2,3, 4,5,6]); A [1 2 3] [4 5 6] sage: A.diagonalization() Traceback (most recent call last): ... TypeError: not a square matrix sage: B = matrix(ZZ, 2, [1, 2, 3, 4]); B [1 2] [3 4] sage: B.diagonalization() Traceback (most recent call last): ... ValueError: matrix entries must be from a field sage: C = matrix(RR, 2, [1., 2., 3., 4.]); C [1.00000000000000 2.00000000000000] [3.00000000000000 4.00000000000000] sage: C.diagonalization() Traceback (most recent call last): ... ValueError: base field must be exact, but Real Field with 53 bits of precision is not sage: D = matrix(QQ, 2, [0, 2, 1, 0]); D [0 2] [1 0] sage: D.diagonalization() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: not diagonalizable over Rational Field sage: E = matrix(QQ, 2, [3, 1, 0, 3]); E [3 1] [0 3] sage: E.diagonalization() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: not diagonalizable sage: E.jordan_form() # needs sage.combinat sage.libs.pari [3 1] [0 3]
>>> from sage.all import * >>> A = matrix(QQ, Integer(2), [Integer(1),Integer(2),Integer(3), Integer(4),Integer(5),Integer(6)]); A [1 2 3] [4 5 6] >>> A.diagonalization() Traceback (most recent call last): ... TypeError: not a square matrix >>> B = matrix(ZZ, Integer(2), [Integer(1), Integer(2), Integer(3), Integer(4)]); B [1 2] [3 4] >>> B.diagonalization() Traceback (most recent call last): ... ValueError: matrix entries must be from a field >>> C = matrix(RR, Integer(2), [RealNumber('1.'), RealNumber('2.'), RealNumber('3.'), RealNumber('4.')]); C [1.00000000000000 2.00000000000000] [3.00000000000000 4.00000000000000] >>> C.diagonalization() Traceback (most recent call last): ... ValueError: base field must be exact, but Real Field with 53 bits of precision is not >>> D = matrix(QQ, Integer(2), [Integer(0), Integer(2), Integer(1), Integer(0)]); D [0 2] [1 0] >>> D.diagonalization() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: not diagonalizable over Rational Field >>> E = matrix(QQ, Integer(2), [Integer(3), Integer(1), Integer(0), Integer(3)]); E [3 1] [0 3] >>> E.diagonalization() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: not diagonalizable >>> E.jordan_form() # needs sage.combinat sage.libs.pari [3 1] [0 3]
A = matrix(QQ, 2, [1,2,3, 4,5,6]); A A.diagonalization() B = matrix(ZZ, 2, [1, 2, 3, 4]); B B.diagonalization() C = matrix(RR, 2, [1., 2., 3., 4.]); C C.diagonalization() D = matrix(QQ, 2, [0, 2, 1, 0]); D D.diagonalization() # needs sage.libs.pari E = matrix(QQ, 2, [3, 1, 0, 3]); E E.diagonalization() # needs sage.libs.pari E.jordan_form() # needs sage.combinat sage.libs.pari
- echelon_form(algorithm='default', cutoff=0, **kwds)[source]¶
Return the echelon form of
self.Note
This row reduction does not use division if the matrix is not over a field (e.g., if the matrix is over the integers). If you want to calculate the echelon form using division, then use
rref(), which assumes that the matrix entries are in a field (specifically, the field of fractions of the base ring of the matrix).INPUT:
algorithm– string. Which algorithm to use. Choices are'default': Let Sage choose an algorithm (default).'classical': Gauss elimination.'partial_pivoting': Gauss elimination, using partial pivoting (if base ring has absolute value)'scaled_partial_pivoting'– Gauss elimination, using scaled partial pivoting (if base ring has absolute value)'scaled_partial_pivoting_valuation': Gauss elimination, using scaled partial pivoting (if base ring has valuation)'strassen': use a Strassen divide and conquer algorithm (if available)
cutoff– integer; only used if the Strassen algorithm is selectedtransformation– boolean; whether to also return the transformation matrix. Some matrix backends do not provide this information, in which case this option is ignored.
OUTPUT:
The reduced row echelon form of
self, as an immutable matrix. Note thatselfis not changed by this command. Useechelonize()to changeselfin place.If the optional parameter
transformation=Trueis specified, the output consists of a pair \((E,T)\) of matrices where \(E\) is the echelon form ofselfand \(T\) is the transformation matrix.EXAMPLES:
sage: MS = MatrixSpace(GF(19), 2, 3) sage: C = MS.matrix([1,2,3,4,5,6]) sage: C.rank() 2 sage: C.nullity() 0 sage: C.echelon_form() [ 1 0 18] [ 0 1 2]
>>> from sage.all import * >>> MS = MatrixSpace(GF(Integer(19)), Integer(2), Integer(3)) >>> C = MS.matrix([Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6)]) >>> C.rank() 2 >>> C.nullity() 0 >>> C.echelon_form() [ 1 0 18] [ 0 1 2]
MS = MatrixSpace(GF(19), 2, 3) C = MS.matrix([1,2,3,4,5,6]) C.rank() C.nullity() C.echelon_form()
The matrix library used for \(\ZZ/p\)-matrices does not return the transformation matrix, so the
transformationoption is ignored:sage: C.echelon_form(transformation=True) [ 1 0 18] [ 0 1 2] sage: D = matrix(ZZ, 2, 3, [1,2,3,4,5,6]) sage: D.echelon_form(transformation=True) ( [1 2 3] [ 1 0] [0 3 6], [ 4 -1] ) sage: E, T = D.echelon_form(transformation=True) sage: T*D == E True
>>> from sage.all import * >>> C.echelon_form(transformation=True) [ 1 0 18] [ 0 1 2] >>> D = matrix(ZZ, Integer(2), Integer(3), [Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6)]) >>> D.echelon_form(transformation=True) ( [1 2 3] [ 1 0] [0 3 6], [ 4 -1] ) >>> E, T = D.echelon_form(transformation=True) >>> T*D == E True
C.echelon_form(transformation=True) D = matrix(ZZ, 2, 3, [1,2,3,4,5,6]) D.echelon_form(transformation=True) E, T = D.echelon_form(transformation=True) T*D == E
- echelonize(algorithm='default', cutoff=0, **kwds)[source]¶
Transform
selfinto a matrix in echelon form over the same base ring asself.Note
This row reduction does not use division if the matrix is not over a field (e.g., if the matrix is over the integers). If you want to calculate the echelon form using division, then use
rref(), which assumes that the matrix entries are in a field (specifically, the field of fractions of the base ring of the matrix).INPUT:
algorithm– string. Which algorithm to use. Choices are'default': Let Sage choose an algorithm (default).'classical': Gauss elimination.'partial_pivoting': Gauss elimination, using partial pivoting (if base ring has absolute value)'scaled_partial_pivoting': Gauss elimination, using scaled partial pivoting (if base ring has absolute value)'scaled_partial_pivoting_valuation': Gauss elimination, using scaled partial pivoting (if base ring has valuation)'strassen': use a Strassen divide and conquer algorithm (if available)
cutoff– integer; only used if the Strassen algorithm is selectedtransformation– boolean; whether to also return the transformation matrix. Some matrix backends do not provide this information, in which case this option is ignored.
OUTPUT:
The matrix
selfis put into echelon form. Nothing is returned unless the keyword optiontransformation=Trueis specified, in which case the transformation matrix is returned.EXAMPLES:
sage: a = matrix(QQ, 3,3, range(9)); a [0 1 2] [3 4 5] [6 7 8] sage: a.echelonize() sage: a [ 1 0 -1] [ 0 1 2] [ 0 0 0]
>>> from sage.all import * >>> a = matrix(QQ, Integer(3),Integer(3), range(Integer(9))); a [0 1 2] [3 4 5] [6 7 8] >>> a.echelonize() >>> a [ 1 0 -1] [ 0 1 2] [ 0 0 0]
a = matrix(QQ, 3,3, range(9)); a a.echelonize() a
An immutable matrix cannot be transformed into echelon form. Use
self.echelon_form()instead:sage: a = matrix(QQ, 3,3, range(9)); a.set_immutable() sage: a.echelonize() Traceback (most recent call last): ... ValueError: matrix is immutable; please change a copy instead (i.e., use copy(M) to change a copy of M). sage: a.echelon_form() [ 1 0 -1] [ 0 1 2] [ 0 0 0]
>>> from sage.all import * >>> a = matrix(QQ, Integer(3),Integer(3), range(Integer(9))); a.set_immutable() >>> a.echelonize() Traceback (most recent call last): ... ValueError: matrix is immutable; please change a copy instead (i.e., use copy(M) to change a copy of M). >>> a.echelon_form() [ 1 0 -1] [ 0 1 2] [ 0 0 0]
a = matrix(QQ, 3,3, range(9)); a.set_immutable() a.echelonize() a.echelon_form()
Echelon form over the integers is what is also classically often known as Hermite normal form:
sage: a = matrix(ZZ, 3,3, range(9)) sage: a.echelonize(); a [ 3 0 -3] [ 0 1 2] [ 0 0 0]
>>> from sage.all import * >>> a = matrix(ZZ, Integer(3),Integer(3), range(Integer(9))) >>> a.echelonize(); a [ 3 0 -3] [ 0 1 2] [ 0 0 0]
a = matrix(ZZ, 3,3, range(9)) a.echelonize(); a
We compute an echelon form both over a domain and fraction field:
sage: R.<x,y> = QQ[] sage: a = matrix(R, 2, [x,y, x,y]) sage: a.echelon_form() # not very useful? -- why two copies of the same row? # needs sage.rings.function_field [x y] [x y]
>>> from sage.all import * >>> R = QQ['x, y']; (x, y,) = R._first_ngens(2) >>> a = matrix(R, Integer(2), [x,y, x,y]) >>> a.echelon_form() # not very useful? -- why two copies of the same row? # needs sage.rings.function_field [x y] [x y]
R.<x,y> = QQ[] a = matrix(R, 2, [x,y, x,y]) a.echelon_form() # not very useful? -- why two copies of the same row? # needs sage.rings.function_field
sage: b = a.change_ring(R.fraction_field()) sage: b.echelon_form() # potentially useful [ 1 y/x] [ 0 0]
>>> from sage.all import * >>> b = a.change_ring(R.fraction_field()) >>> b.echelon_form() # potentially useful [ 1 y/x] [ 0 0]
b = a.change_ring(R.fraction_field()) b.echelon_form() # potentially useful
>>> from sage.all import * >>> b = a.change_ring(R.fraction_field()) >>> b.echelon_form() # potentially useful [ 1 y/x] [ 0 0]
b = a.change_ring(R.fraction_field()) b.echelon_form() # potentially useful
We check that the echelon form works for matrices over \(p\)-adics. See Issue #17272:
sage: # needs sage.rings.padics sage: R = ZpCA(5,5,print_mode='val-unit') sage: A = matrix(R, 3,3, [250,2369,1147, 106,927,362, 90,398,2483]) sage: A [5^3 * 2 + O(5^5) 2369 + O(5^5) 1147 + O(5^5)] [ 106 + O(5^5) 927 + O(5^5) 362 + O(5^5)] [ 5 * 18 + O(5^5) 398 + O(5^5) 2483 + O(5^5)] sage: K = R.fraction_field() sage: A.change_ring(K).augment(identity_matrix(K,3)).echelon_form() [ 1 + O(5^5) O(5^5) O(5^5) 5 * 212 + O(5^5) 3031 + O(5^5) 2201 + O(5^5)] [ O(5^5) 1 + O(5^5) O(5^5) 1348 + O(5^5) 5 * 306 + O(5^5) 2648 + O(5^5)] [ O(5^5) O(5^5) 1 + O(5^5) 1987 + O(5^5) 5 * 263 + O(5^5) 154 + O(5^5)]
>>> from sage.all import * >>> # needs sage.rings.padics >>> R = ZpCA(Integer(5),Integer(5),print_mode='val-unit') >>> A = matrix(R, Integer(3),Integer(3), [Integer(250),Integer(2369),Integer(1147), Integer(106),Integer(927),Integer(362), Integer(90),Integer(398),Integer(2483)]) >>> A [5^3 * 2 + O(5^5) 2369 + O(5^5) 1147 + O(5^5)] [ 106 + O(5^5) 927 + O(5^5) 362 + O(5^5)] [ 5 * 18 + O(5^5) 398 + O(5^5) 2483 + O(5^5)] >>> K = R.fraction_field() >>> A.change_ring(K).augment(identity_matrix(K,Integer(3))).echelon_form() [ 1 + O(5^5) O(5^5) O(5^5) 5 * 212 + O(5^5) 3031 + O(5^5) 2201 + O(5^5)] [ O(5^5) 1 + O(5^5) O(5^5) 1348 + O(5^5) 5 * 306 + O(5^5) 2648 + O(5^5)] [ O(5^5) O(5^5) 1 + O(5^5) 1987 + O(5^5) 5 * 263 + O(5^5) 154 + O(5^5)]
# needs sage.rings.padics R = ZpCA(5,5,print_mode='val-unit') A = matrix(R, 3,3, [250,2369,1147, 106,927,362, 90,398,2483]) A K = R.fraction_field() A.change_ring(K).augment(identity_matrix(K,3)).echelon_form()
Echelon form is not defined over arbitrary rings:
sage: a = matrix(Integers(9), 3,3, range(9)) sage: a.echelon_form() Traceback (most recent call last): ... NotImplementedError: Echelon form not implemented over 'Ring of integers modulo 9'.
>>> from sage.all import * >>> a = matrix(Integers(Integer(9)), Integer(3),Integer(3), range(Integer(9))) >>> a.echelon_form() Traceback (most recent call last): ... NotImplementedError: Echelon form not implemented over 'Ring of integers modulo 9'.
a = matrix(Integers(9), 3,3, range(9)) a.echelon_form()
Involving a sparse matrix:
sage: m = matrix(3,[1, 1, 1, 1, 0, 2, 1, 2, 0], sparse=True); m [1 1 1] [1 0 2] [1 2 0] sage: m.echelon_form() [ 1 0 2] [ 0 1 -1] [ 0 0 0] sage: m.echelonize(); m [ 1 0 2] [ 0 1 -1] [ 0 0 0]
>>> from sage.all import * >>> m = matrix(Integer(3),[Integer(1), Integer(1), Integer(1), Integer(1), Integer(0), Integer(2), Integer(1), Integer(2), Integer(0)], sparse=True); m [1 1 1] [1 0 2] [1 2 0] >>> m.echelon_form() [ 1 0 2] [ 0 1 -1] [ 0 0 0] >>> m.echelonize(); m [ 1 0 2] [ 0 1 -1] [ 0 0 0]
m = matrix(3,[1, 1, 1, 1, 0, 2, 1, 2, 0], sparse=True); m m.echelon_form() m.echelonize(); m
The transformation matrix is optionally returned:
sage: m_original = m sage: transformation_matrix = m.echelonize(transformation=True) sage: m == transformation_matrix * m_original True
>>> from sage.all import * >>> m_original = m >>> transformation_matrix = m.echelonize(transformation=True) >>> m == transformation_matrix * m_original True
m_original = m transformation_matrix = m.echelonize(transformation=True) m == transformation_matrix * m_original
- eigenmatrix_left(other=None)[source]¶
Return matrices \(D\) and \(P\), where \(D\) is a diagonal matrix of eigenvalues and the rows of \(P\) are corresponding eigenvectors (or zero vectors).
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved
OUTPUT:
If
selfis a square matrix \(A\), then the output is a diagonal matrix \(D\) and a matrix \(P\) such that\[P A = D P,\]where the rows of \(P\) are eigenvectors of \(A\) and the diagonal entries of \(D\) are the corresponding eigenvalues.
If a matrix \(B\) is passed as optional argument, the output is a solution to the generalized eigenvalue problem such that
\[P A = D P B.\]The ordinary eigenvalue problem is equivalent to the generalized one if \(B\) is the identity matrix.
The generalized eigenvector decomposition is currently only implemented for matrices over
RDFandCDF.EXAMPLES:
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: D, P = A.eigenmatrix_left() sage: D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] sage: P [ 1 -2 1] [ 1 0.3101020514433644? -0.3797958971132713?] [ 1 1.289897948556636? 1.579795897113272?] sage: P*A == D*P True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> D, P = A.eigenmatrix_left() >>> D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] >>> P [ 1 -2 1] [ 1 0.3101020514433644? -0.3797958971132713?] [ 1 1.289897948556636? 1.579795897113272?] >>> P*A == D*P True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A D, P = A.eigenmatrix_left() D P P*A == D*P
Because \(P\) is invertible, \(A\) is diagonalizable.
sage: A == (~P)*D*P # needs sage.rings.number_field True
>>> from sage.all import * >>> A == (~P)*D*P # needs sage.rings.number_field True
A == (~P)*D*P # needs sage.rings.number_field
The matrix \(P\) may contain zero rows corresponding to eigenvalues for which the algebraic multiplicity is greater than the geometric multiplicity. In these cases, the matrix is not diagonalizable.
sage: # needs sage.rings.number_field sage: A = jordan_block(2, 3); A [2 1 0] [0 2 1] [0 0 2] sage: D, P = A.eigenmatrix_left() sage: D [2 0 0] [0 2 0] [0 0 2] sage: P [0 0 1] [0 0 0] [0 0 0] sage: P*A == D*P True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = jordan_block(Integer(2), Integer(3)); A [2 1 0] [0 2 1] [0 0 2] >>> D, P = A.eigenmatrix_left() >>> D [2 0 0] [0 2 0] [0 0 2] >>> P [0 0 1] [0 0 0] [0 0 0] >>> P*A == D*P True
# needs sage.rings.number_field A = jordan_block(2, 3); A D, P = A.eigenmatrix_left() D P P*A == D*P
A generalized eigenvector decomposition:
sage: # needs scipy sage: A = matrix(RDF, [[1, -2], [3, 4]]) sage: B = matrix(RDF, [[0, 7], [2, -3]]) sage: D, P = A.eigenmatrix_left(B) sage: (P * A - D * P * B).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy >>> A = matrix(RDF, [[Integer(1), -Integer(2)], [Integer(3), Integer(4)]]) >>> B = matrix(RDF, [[Integer(0), Integer(7)], [Integer(2), -Integer(3)]]) >>> D, P = A.eigenmatrix_left(B) >>> (P * A - D * P * B).norm() < RealNumber('1e-14') True
# needs scipy A = matrix(RDF, [[1, -2], [3, 4]]) B = matrix(RDF, [[0, 7], [2, -3]]) D, P = A.eigenmatrix_left(B) (P * A - D * P * B).norm() < 1e-14
The matrix \(B\) in a generalized eigenvalue problem may be singular:
sage: # needs scipy sage.rings.complex_double sage.symbolic sage: A = matrix.identity(CDF, 2) sage: B = matrix(CDF, [[2, 1+I], [4, 2+2*I]]) sage: D, P = A.eigenmatrix_left(B) sage: D.diagonal() # tol 1e-14 [0.2 - 0.1*I, +infinity]
>>> from sage.all import * >>> # needs scipy sage.rings.complex_double sage.symbolic >>> A = matrix.identity(CDF, Integer(2)) >>> B = matrix(CDF, [[Integer(2), Integer(1)+I], [Integer(4), Integer(2)+Integer(2)*I]]) >>> D, P = A.eigenmatrix_left(B) >>> D.diagonal() # tol 1e-14 [0.2 - 0.1*I, +infinity]
# needs scipy sage.rings.complex_double sage.symbolic A = matrix.identity(CDF, 2) B = matrix(CDF, [[2, 1+I], [4, 2+2*I]]) D, P = A.eigenmatrix_left(B) D.diagonal() # tol 1e-14
In this case, we can still verify the eigenvector equation for the first eigenvalue and first eigenvector:
sage: # needs scipy sage.rings.complex_double sage.symbolic sage: l = D[0, 0] sage: v = P[0, :] sage: (v * A - l * v * B).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy sage.rings.complex_double sage.symbolic >>> l = D[Integer(0), Integer(0)] >>> v = P[Integer(0), :] >>> (v * A - l * v * B).norm() < RealNumber('1e-14') True
# needs scipy sage.rings.complex_double sage.symbolic l = D[0, 0] v = P[0, :] (v * A - l * v * B).norm() < 1e-14
The second eigenvector is contained in the left kernel of \(B\):
sage: (P[1, :] * B).norm() < 1e-14 # needs scipy sage.rings.complex_double sage.symbolic True
>>> from sage.all import * >>> (P[Integer(1), :] * B).norm() < RealNumber('1e-14') # needs scipy sage.rings.complex_double sage.symbolic True
(P[1, :] * B).norm() < 1e-14 # needs scipy sage.rings.complex_double sage.symbolic
- eigenmatrix_right(other=None)[source]¶
Return matrices \(D\) and \(P\), where \(D\) is a diagonal matrix of eigenvalues and the columns of \(P\) are corresponding eigenvectors (or zero vectors).
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved
OUTPUT:
If
selfis a square matrix \(A\), then the output is a diagonal matrix \(D\) and a matrix \(P\) such that\[A P = P D,\]where the columns of \(P\) are eigenvectors of \(A\) and the diagonal entries of \(D\) are the corresponding eigenvalues.
If a matrix \(B\) is passed as optional argument, the output is a solution to the generalized eigenvalue problem such that
\[A P = B P D.\]The ordinary eigenvalue problem is equivalent to the generalized one if \(B\) is the identity matrix.
The generalized eigenvector decomposition is currently only implemented for matrices over
RDFandCDF.EXAMPLES:
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: D, P = A.eigenmatrix_right() sage: D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] sage: P [ 1 1 1] [ -2 0.1303061543300932? 3.069693845669907?] [ 1 -0.7393876913398137? 5.139387691339814?] sage: A*P == P*D True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> D, P = A.eigenmatrix_right() >>> D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] >>> P [ 1 1 1] [ -2 0.1303061543300932? 3.069693845669907?] [ 1 -0.7393876913398137? 5.139387691339814?] >>> A*P == P*D True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A D, P = A.eigenmatrix_right() D P A*P == P*D
Because \(P\) is invertible, \(A\) is diagonalizable.
sage: A == P*D*(~P) # needs sage.rings.number_field True
>>> from sage.all import * >>> A == P*D*(~P) # needs sage.rings.number_field True
A == P*D*(~P) # needs sage.rings.number_field
The matrix \(P\) may contain zero columns corresponding to eigenvalues for which the algebraic multiplicity is greater than the geometric multiplicity. In these cases, the matrix is not diagonalizable.
sage: # needs sage.rings.number_field sage: A = jordan_block(2, 3); A [2 1 0] [0 2 1] [0 0 2] sage: D, P = A.eigenmatrix_right() sage: D [2 0 0] [0 2 0] [0 0 2] sage: P [1 0 0] [0 0 0] [0 0 0] sage: A*P == P*D True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = jordan_block(Integer(2), Integer(3)); A [2 1 0] [0 2 1] [0 0 2] >>> D, P = A.eigenmatrix_right() >>> D [2 0 0] [0 2 0] [0 0 2] >>> P [1 0 0] [0 0 0] [0 0 0] >>> A*P == P*D True
# needs sage.rings.number_field A = jordan_block(2, 3); A D, P = A.eigenmatrix_right() D P A*P == P*D
A generalized eigenvector decomposition:
sage: # needs scipy sage: A = matrix(RDF, [[1, -2], [3, 4]]) sage: B = matrix(RDF, [[0, 7], [2, -3]]) sage: D, P = A.eigenmatrix_right(B) sage: (A * P - B * P * D).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy >>> A = matrix(RDF, [[Integer(1), -Integer(2)], [Integer(3), Integer(4)]]) >>> B = matrix(RDF, [[Integer(0), Integer(7)], [Integer(2), -Integer(3)]]) >>> D, P = A.eigenmatrix_right(B) >>> (A * P - B * P * D).norm() < RealNumber('1e-14') True
# needs scipy A = matrix(RDF, [[1, -2], [3, 4]]) B = matrix(RDF, [[0, 7], [2, -3]]) D, P = A.eigenmatrix_right(B) (A * P - B * P * D).norm() < 1e-14
The matrix \(B\) in a generalized eigenvalue problem may be singular:
sage: # needs scipy sage: A = matrix.identity(RDF, 2) sage: B = matrix(RDF, [[3, 5], [6, 10]]) sage: D, P = A.eigenmatrix_right(B); D # tol 1e-14 [0.07692307692307694 0.0] [ 0.0 +infinity]
>>> from sage.all import * >>> # needs scipy >>> A = matrix.identity(RDF, Integer(2)) >>> B = matrix(RDF, [[Integer(3), Integer(5)], [Integer(6), Integer(10)]]) >>> D, P = A.eigenmatrix_right(B); D # tol 1e-14 [0.07692307692307694 0.0] [ 0.0 +infinity]
# needs scipy A = matrix.identity(RDF, 2) B = matrix(RDF, [[3, 5], [6, 10]]) D, P = A.eigenmatrix_right(B); D # tol 1e-14
In this case, we can still verify the eigenvector equation for the first eigenvalue and first eigenvector:
sage: # needs scipy sage: l = D[0, 0] sage: v = P[:, 0] sage: (A * v - B * v * l).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy >>> l = D[Integer(0), Integer(0)] >>> v = P[:, Integer(0)] >>> (A * v - B * v * l).norm() < RealNumber('1e-14') True
# needs scipy l = D[0, 0] v = P[:, 0] (A * v - B * v * l).norm() < 1e-14
The second eigenvector is contained in the right kernel of \(B\):
sage: (B * P[:, 1]).norm() < 1e-14 # needs scipy True
>>> from sage.all import * >>> (B * P[:, Integer(1)]).norm() < RealNumber('1e-14') # needs scipy True
(B * P[:, 1]).norm() < 1e-14 # needs scipy
- eigenspaces_left(format='all', var='a', algebraic_multiplicity=False)[source]¶
Compute the left eigenspaces of a matrix.
Note that
eigenspaces_left()andleft_eigenspaces()are identical methods. Here “left” refers to the eigenvectors being placed to the left of the matrix.INPUT:
self– a square matrix over an exact field. For inexact matrices consult the numerical or symbolic matrix classesformat– one of:'all'– attempts to create every eigenspace. This will always be possible for matrices with rational entries'galois'– for each irreducible factor of the characteristic polynomial, a single eigenspace will be output for a single root/eigenvalue for the irreducible factorNone– default; uses the'all'format if the base ring is contained in an algebraically closed field which is implemented. Otherwise, uses the'galois'format.
var– string (default:'a'); variable name used to represent elements of the root field of each irreducible factor of the characteristic polynomial. Ifvar='a', then the root fields will be in terms ofa0, a1, a2, ..., where the numbering runs across all the irreducible factors of the characteristic polynomial, even for linear factors.algebraic_multiplicity– boolean (default:False); whether to include the algebraic multiplicity of each eigenvalue in the output. See the discussion below.
OUTPUT:
If
algebraic_multiplicity=False, return a list of pairs \((e, V)\) where \(e\) is an eigenvalue of the matrix, and \(V\) is the corresponding left eigenspace. For Galois conjugates of eigenvalues, there may be just one representative eigenspace, depending on theformatkeyword.If
algebraic_multiplicity=True, return a list of triples \((e, V, n)\) where \(e\) and \(V\) are as above and \(n\) is the algebraic multiplicity of the eigenvalue.Warning
Uses a somewhat naive algorithm (simply factors the characteristic polynomial and computes kernels directly over the extension field).
EXAMPLES:
We compute the left eigenspaces of a \(3\times 3\) rational matrix. First, we request
'all'of the eigenvalues, so the results are in the field of algebraic numbers,QQbar. Then we request just one eigenspace per irreducible factor of the characteristic polynomial withformat='galois'.sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: es = A.eigenspaces_left(format='all'); es # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.3101020514433644? -0.3797958971132713?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 1.289897948556636? 1.579795897113272?]) ] sage: # needs sage.rings.number_field sage: es = A.eigenspaces_left(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ] sage: es = A.eigenspaces_left(format='galois', ....: algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5], 1) ] sage: e, v, n = es[0]; v = v.basis()[0] sage: delta = e*v - v*A sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> es = A.eigenspaces_left(format='all'); es # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.3101020514433644? -0.3797958971132713?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 1.289897948556636? 1.579795897113272?]) ] >>> # needs sage.rings.number_field >>> es = A.eigenspaces_left(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ] >>> es = A.eigenspaces_left(format='galois', ... algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5], 1) ] >>> e, v, n = es[Integer(0)]; v = v.basis()[Integer(0)] >>> delta = e*v - v*A >>> abs(abs(delta)) < RealNumber('1e-10') True
A = matrix(QQ, 3, 3, range(9)); A es = A.eigenspaces_left(format='all'); es # needs sage.rings.number_field # needs sage.rings.number_field es = A.eigenspaces_left(format='galois'); es es = A.eigenspaces_left(format='galois', algebraic_multiplicity=True); es e, v, n = es[0]; v = v.basis()[0] delta = e*v - v*A abs(abs(delta)) < 1e-10The same computation, but with implicit base change to a field.
sage: A = matrix(ZZ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ]
>>> from sage.all import * >>> A = matrix(ZZ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ]
A = matrix(ZZ, 3, 3, range(9)); A A.eigenspaces_left(format='galois') # needs sage.rings.number_field
We compute the left eigenspaces of the matrix of the Hecke operator \(T_2\) on level 43 modular symbols, both with all eigenvalues (the default) and with one subspace per factor.
sage: # needs sage.modular sage: A = ModularSymbols(43).T(2).matrix(); A [ 3 0 0 0 0 0 -1] [ 0 -2 1 0 0 0 0] [ 0 -1 1 1 0 -1 0] [ 0 -1 0 -1 2 -1 1] [ 0 -1 0 1 1 -1 1] [ 0 0 -2 0 2 -2 1] [ 0 0 -1 0 1 0 -1] sage: A.base_ring() Rational Field sage: f = A.charpoly(); f x^7 + x^6 - 12*x^5 - 16*x^4 + 36*x^3 + 52*x^2 - 32*x - 48 sage: factor(f) (x - 3) * (x + 2)^2 * (x^2 - 2)^2 sage: A.eigenspaces_left(algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (-1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 0.4142135623730951? 1 -1] [ 0 0 1 0 -1 0 2.414213562373095?], 2), (1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 -2.414213562373095? 1 -1] [ 0 0 1 0 -1 0 -0.4142135623730951?], 2) ] sage: A.eigenspaces_left(format='galois', algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (a2, Vector space of degree 7 and dimension 2 over Number Field in a2 with defining polynomial x^2 - 2 User basis matrix: [ 0 1 0 -1 -a2 - 1 1 -1] [ 0 0 1 0 -1 0 -a2 + 1], 2) ]
>>> from sage.all import * >>> # needs sage.modular >>> A = ModularSymbols(Integer(43)).T(Integer(2)).matrix(); A [ 3 0 0 0 0 0 -1] [ 0 -2 1 0 0 0 0] [ 0 -1 1 1 0 -1 0] [ 0 -1 0 -1 2 -1 1] [ 0 -1 0 1 1 -1 1] [ 0 0 -2 0 2 -2 1] [ 0 0 -1 0 1 0 -1] >>> A.base_ring() Rational Field >>> f = A.charpoly(); f x^7 + x^6 - 12*x^5 - 16*x^4 + 36*x^3 + 52*x^2 - 32*x - 48 >>> factor(f) (x - 3) * (x + 2)^2 * (x^2 - 2)^2 >>> A.eigenspaces_left(algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (-1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 0.4142135623730951? 1 -1] [ 0 0 1 0 -1 0 2.414213562373095?], 2), (1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 -2.414213562373095? 1 -1] [ 0 0 1 0 -1 0 -0.4142135623730951?], 2) ] >>> A.eigenspaces_left(format='galois', algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (a2, Vector space of degree 7 and dimension 2 over Number Field in a2 with defining polynomial x^2 - 2 User basis matrix: [ 0 1 0 -1 -a2 - 1 1 -1] [ 0 0 1 0 -1 0 -a2 + 1], 2) ]
# needs sage.modular A = ModularSymbols(43).T(2).matrix(); A A.base_ring() f = A.charpoly(); f factor(f) A.eigenspaces_left(algebraic_multiplicity=True) A.eigenspaces_left(format='galois', algebraic_multiplicity=True)
Next we compute the left eigenspaces over the finite field of order 11.
sage: # needs sage.modular sage.rings.finite_rings sage: A = ModularSymbols(43, base_ring=GF(11), sign=1).T(2).matrix(); A [ 3 0 9 0] [ 0 9 0 10] [ 0 0 10 1] [ 0 0 1 1] sage: A.base_ring() Finite Field of size 11 sage: A.charpoly() x^4 + 10*x^3 + 3*x^2 + 2*x + 1 sage: A.eigenspaces_left(format='galois', var='beta') [ (9, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [0 1 5 6]), (3, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [1 0 1 6]), (beta2, Vector space of degree 4 and dimension 1 over Univariate Quotient Polynomial Ring in beta2 over Finite Field of size 11 with modulus x^2 + 9 User basis matrix: [ 0 0 1 beta2 + 1]) ]
>>> from sage.all import * >>> # needs sage.modular sage.rings.finite_rings >>> A = ModularSymbols(Integer(43), base_ring=GF(Integer(11)), sign=Integer(1)).T(Integer(2)).matrix(); A [ 3 0 9 0] [ 0 9 0 10] [ 0 0 10 1] [ 0 0 1 1] >>> A.base_ring() Finite Field of size 11 >>> A.charpoly() x^4 + 10*x^3 + 3*x^2 + 2*x + 1 >>> A.eigenspaces_left(format='galois', var='beta') [ (9, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [0 1 5 6]), (3, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [1 0 1 6]), (beta2, Vector space of degree 4 and dimension 1 over Univariate Quotient Polynomial Ring in beta2 over Finite Field of size 11 with modulus x^2 + 9 User basis matrix: [ 0 0 1 beta2 + 1]) ]
# needs sage.modular sage.rings.finite_rings A = ModularSymbols(43, base_ring=GF(11), sign=1).T(2).matrix(); A A.base_ring() A.charpoly() A.eigenspaces_left(format='galois', var='beta')
This method is only applicable to exact matrices. The “eigenmatrix” routines for matrices with double-precision floating-point entries (
RDF,CDF) are the best alternative. (Since some platforms return eigenvectors that are the negatives of those given here, this one example is not tested here.) There are also “eigenmatrix” routines for matrices with symbolic entries.sage: A = matrix(QQ, 3, 3, range(9)) sage: A.change_ring(RR).eigenspaces_left() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options sage: # needs scipy sage: em = A.change_ring(RDF).eigenmatrix_left() sage: eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] sage: eigenvectors = em[1]; eigenvectors # not tested [ 0.440242867... 0.567868371... 0.695493875...] [ 0.897878732... 0.278434036... -0.341010658...] [ 0.408248290... -0.816496580... 0.408248290...] sage: # needs sage.symbolic sage: x, y = var('x y') sage: S = matrix([[x, y], [y, 3*x^2]]) sage: em = S.eigenmatrix_left() sage: eigenvalues = em[0]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] sage: eigenvectors = em[1]; eigenvectors [ 1 1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y] [ 1 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))) >>> A.change_ring(RR).eigenspaces_left() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options >>> # needs scipy >>> em = A.change_ring(RDF).eigenmatrix_left() >>> eigenvalues = em[Integer(0)]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] >>> eigenvectors = em[Integer(1)]; eigenvectors # not tested [ 0.440242867... 0.567868371... 0.695493875...] [ 0.897878732... 0.278434036... -0.341010658...] [ 0.408248290... -0.816496580... 0.408248290...] >>> # needs sage.symbolic >>> x, y = var('x y') >>> S = matrix([[x, y], [y, Integer(3)*x**Integer(2)]]) >>> em = S.eigenmatrix_left() >>> eigenvalues = em[Integer(0)]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] >>> eigenvectors = em[Integer(1)]; eigenvectors [ 1 1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y] [ 1 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
A = matrix(QQ, 3, 3, range(9)) A.change_ring(RR).eigenspaces_left() # needs scipy em = A.change_ring(RDF).eigenmatrix_left() eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 eigenvectors = em[1]; eigenvectors # not tested # needs sage.symbolic x, y = var('x y') S = matrix([[x, y], [y, 3*x^2]]) em = S.eigenmatrix_left() eigenvalues = em[0]; eigenvalues eigenvectors = em[1]; eigenvectorsA request for
'all'the eigenvalues, when it is not possible, will raise an error. Using the'galois'format option is more likely to be successful.sage: # needs sage.rings.finite_rings sage: F.<b> = FiniteField(11^2) sage: A = matrix(F, [[b + 1, b + 1], [10*b + 4, 5*b + 4]]) sage: A.eigenspaces_left(format='all') # needs sage.rings.number_field Traceback (most recent call last): ... NotImplementedError: unable to construct eigenspaces for eigenvalues outside the base field, try the keyword option: format='galois' sage: A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (a0, Vector space of degree 2 and dimension 1 over Univariate Quotient Polynomial Ring in a0 over Finite Field in b of size 11^2 with modulus x^2 + (5*b + 6)*x + 8*b + 10 User basis matrix: [ 1 6*b*a0 + 3*b + 1]) ]
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(11)**Integer(2), names=('b',)); (b,) = F._first_ngens(1) >>> A = matrix(F, [[b + Integer(1), b + Integer(1)], [Integer(10)*b + Integer(4), Integer(5)*b + Integer(4)]]) >>> A.eigenspaces_left(format='all') # needs sage.rings.number_field Traceback (most recent call last): ... NotImplementedError: unable to construct eigenspaces for eigenvalues outside the base field, try the keyword option: format='galois' >>> A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (a0, Vector space of degree 2 and dimension 1 over Univariate Quotient Polynomial Ring in a0 over Finite Field in b of size 11^2 with modulus x^2 + (5*b + 6)*x + 8*b + 10 User basis matrix: [ 1 6*b*a0 + 3*b + 1]) ]
# needs sage.rings.finite_rings F.<b> = FiniteField(11^2) A = matrix(F, [[b + 1, b + 1], [10*b + 4, 5*b + 4]]) A.eigenspaces_left(format='all') # needs sage.rings.number_field A.eigenspaces_left(format='galois') # needs sage.rings.number_field
- eigenspaces_right(format='all', var='a', algebraic_multiplicity=False)[source]¶
Compute the right eigenspaces of a matrix.
Note that
eigenspaces_right()andright_eigenspaces()are identical methods. Here “right” refers to the eigenvectors being placed to the right of the matrix.INPUT:
self– a square matrix over an exact field. For inexact matrices consult the numerical or symbolic matrix classesformat– (default:None)'all'– attempts to create every eigenspace. This will always be possible for matrices with rational entries'galois'– for each irreducible factor of the characteristic polynomial, a single eigenspace will be output for a single root/eigenvalue for the irreducible factorNone– uses the ‘all’ format if the base ring is contained in an algebraically closed field which is implemented. Otherwise, uses the ‘galois’ format.
var– (default:'a') variable name used to represent elements of the root field of each irreducible factor of the characteristic polynomial. If var=’a’, then the root fields will be in terms of a0, a1, a2, …., where the numbering runs across all the irreducible factors of the characteristic polynomial, even for linear factors.algebraic_multiplicity– (default:False) whether or not to include the algebraic multiplicity of each eigenvalue in the output. See the discussion below.
OUTPUT:
If algebraic_multiplicity=False, return a list of pairs (e, V) where e is an eigenvalue of the matrix, and V is the corresponding left eigenspace. For Galois conjugates of eigenvalues, there may be just one representative eigenspace, depending on the
formatkeyword.If algebraic_multiplicity=True, return a list of triples (e, V, n) where e and V are as above and n is the algebraic multiplicity of the eigenvalue.
Warning
Uses a somewhat naive algorithm (simply factors the characteristic polynomial and computes kernels directly over the extension field).
EXAMPLES:
Right eigenspaces are computed from the left eigenspaces of the transpose of the matrix. As such, there is a greater collection of illustrative examples at the
eigenspaces_left().We compute the right eigenspaces of a \(3\times 3\) rational matrix.
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.eigenspaces_right() [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.1303061543300932? -0.7393876913398137?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 3.069693845669907? 5.139387691339814?]) ] sage: es = A.eigenspaces_right(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ] sage: es = A.eigenspaces_right(format='galois', ....: algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5], 1) ] sage: e, v, n = es[0]; v = v.basis()[0] sage: delta = v*e - A*v sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.eigenspaces_right() [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.1303061543300932? -0.7393876913398137?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 3.069693845669907? 5.139387691339814?]) ] >>> es = A.eigenspaces_right(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ] >>> es = A.eigenspaces_right(format='galois', ... algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5], 1) ] >>> e, v, n = es[Integer(0)]; v = v.basis()[Integer(0)] >>> delta = v*e - A*v >>> abs(abs(delta)) < RealNumber('1e-10') True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A A.eigenspaces_right() es = A.eigenspaces_right(format='galois'); es es = A.eigenspaces_right(format='galois', algebraic_multiplicity=True); es e, v, n = es[0]; v = v.basis()[0] delta = v*e - A*v abs(abs(delta)) < 1e-10The same computation, but with implicit base change to a field:
sage: A = matrix(ZZ, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.eigenspaces_right(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ]
>>> from sage.all import * >>> A = matrix(ZZ, Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.eigenspaces_right(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ]
A = matrix(ZZ, 3, range(9)); A A.eigenspaces_right(format='galois') # needs sage.rings.number_field
This method is only applicable to exact matrices. The “eigenmatrix” routines for matrices with double-precision floating-point entries (
RDF,CDF) are the best alternative. (Since some platforms return eigenvectors that are the negatives of those given here, this one example is not tested here.) There are also “eigenmatrix” routines for matrices with symbolic entries.sage: B = matrix(RR, 3, 3, range(9)) sage: B.eigenspaces_right() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options sage: # needs scipy sage: em = B.change_ring(RDF).eigenmatrix_right() sage: eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] sage: eigenvectors = em[1]; eigenvectors # not tested [ 0.164763817... 0.799699663... 0.408248290...] [ 0.505774475... 0.104205787... -0.816496580...] [ 0.846785134... -0.591288087... 0.408248290...] sage: # needs sage.symbolic sage: x, y = var('x y') sage: S = matrix([[x, y], [y, 3*x^2]]) sage: em = S.eigenmatrix_right() sage: eigenvalues = em[0]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] sage: eigenvectors = em[1]; eigenvectors [ 1 1] [1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
>>> from sage.all import * >>> B = matrix(RR, Integer(3), Integer(3), range(Integer(9))) >>> B.eigenspaces_right() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options >>> # needs scipy >>> em = B.change_ring(RDF).eigenmatrix_right() >>> eigenvalues = em[Integer(0)]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] >>> eigenvectors = em[Integer(1)]; eigenvectors # not tested [ 0.164763817... 0.799699663... 0.408248290...] [ 0.505774475... 0.104205787... -0.816496580...] [ 0.846785134... -0.591288087... 0.408248290...] >>> # needs sage.symbolic >>> x, y = var('x y') >>> S = matrix([[x, y], [y, Integer(3)*x**Integer(2)]]) >>> em = S.eigenmatrix_right() >>> eigenvalues = em[Integer(0)]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] >>> eigenvectors = em[Integer(1)]; eigenvectors [ 1 1] [1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
B = matrix(RR, 3, 3, range(9)) B.eigenspaces_right() # needs scipy em = B.change_ring(RDF).eigenmatrix_right() eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 eigenvectors = em[1]; eigenvectors # not tested # needs sage.symbolic x, y = var('x y') S = matrix([[x, y], [y, 3*x^2]]) em = S.eigenmatrix_right() eigenvalues = em[0]; eigenvalues eigenvectors = em[1]; eigenvectors
- eigenvalue_multiplicity(s)[source]¶
Return the multiplicity of
sas a generalized eigenvalue of the matrix.EXAMPLES:
sage: M = Matrix(QQ, [[0,1],[0,0]]) sage: M.eigenvalue_multiplicity(0) 2 sage: M.eigenvalue_multiplicity(1) 0 sage: M = posets.DiamondPoset(5).coxeter_transformation() # needs sage.graphs sage.libs.flint sage: [M.eigenvalue_multiplicity(x) for x in [-1, 1]] # needs sage.graphs sage.libs.flint [3, 2]
>>> from sage.all import * >>> M = Matrix(QQ, [[Integer(0),Integer(1)],[Integer(0),Integer(0)]]) >>> M.eigenvalue_multiplicity(Integer(0)) 2 >>> M.eigenvalue_multiplicity(Integer(1)) 0 >>> M = posets.DiamondPoset(Integer(5)).coxeter_transformation() # needs sage.graphs sage.libs.flint >>> [M.eigenvalue_multiplicity(x) for x in [-Integer(1), Integer(1)]] # needs sage.graphs sage.libs.flint [3, 2]
M = Matrix(QQ, [[0,1],[0,0]]) M.eigenvalue_multiplicity(0) M.eigenvalue_multiplicity(1) M = posets.DiamondPoset(5).coxeter_transformation() # needs sage.graphs sage.libs.flint [M.eigenvalue_multiplicity(x) for x in [-1, 1]] # needs sage.graphs sage.libs.flint
- eigenvalues(extend=True)[source]¶
Return a sequence of the eigenvalues of a matrix, with multiplicity. If the eigenvalues are roots of polynomials in
QQ, thenQQbarelements are returned that represent each separate root.If the option
extendis set toFalse, only eigenvalues in the base ring are considered.EXAMPLES:
sage: a = matrix(ZZ, 4, range(16)); a [ 0 1 2 3] [ 4 5 6 7] [ 8 9 10 11] [12 13 14 15] sage: sorted(a.eigenvalues(), reverse=True) # needs sage.rings.number_field [32.46424919657298?, 0, 0, -2.464249196572981?]
>>> from sage.all import * >>> a = matrix(ZZ, Integer(4), range(Integer(16))); a [ 0 1 2 3] [ 4 5 6 7] [ 8 9 10 11] [12 13 14 15] >>> sorted(a.eigenvalues(), reverse=True) # needs sage.rings.number_field [32.46424919657298?, 0, 0, -2.464249196572981?]
a = matrix(ZZ, 4, range(16)); a sorted(a.eigenvalues(), reverse=True) # needs sage.rings.number_field
sage: a = matrix([(1, 9, -1, -1), ....: (-2, 0, -10, 2), ....: (-1, 0, 15, -2), ....: (0, 1, 0, -1)]) sage: a.eigenvalues() # needs sage.rings.number_field [-0.9386318578049146?, 15.50655435353258?, 0.2160387521361705? - 4.713151979747493?*I, 0.2160387521361705? + 4.713151979747493?*I]
>>> from sage.all import * >>> a = matrix([(Integer(1), Integer(9), -Integer(1), -Integer(1)), ... (-Integer(2), Integer(0), -Integer(10), Integer(2)), ... (-Integer(1), Integer(0), Integer(15), -Integer(2)), ... (Integer(0), Integer(1), Integer(0), -Integer(1))]) >>> a.eigenvalues() # needs sage.rings.number_field [-0.9386318578049146?, 15.50655435353258?, 0.2160387521361705? - 4.713151979747493?*I, 0.2160387521361705? + 4.713151979747493?*I]
a = matrix([(1, 9, -1, -1), (-2, 0, -10, 2), (-1, 0, 15, -2), (0, 1, 0, -1)]) a.eigenvalues() # needs sage.rings.number_field>>> from sage.all import * >>> a = matrix([(Integer(1), Integer(9), -Integer(1), -Integer(1)), ... (-Integer(2), Integer(0), -Integer(10), Integer(2)), ... (-Integer(1), Integer(0), Integer(15), -Integer(2)), ... (Integer(0), Integer(1), Integer(0), -Integer(1))]) >>> a.eigenvalues() # needs sage.rings.number_field [-0.9386318578049146?, 15.50655435353258?, 0.2160387521361705? - 4.713151979747493?*I, 0.2160387521361705? + 4.713151979747493?*I]
a = matrix([(1, 9, -1, -1), (-2, 0, -10, 2), (-1, 0, 15, -2), (0, 1, 0, -1)]) a.eigenvalues() # needs sage.rings.number_fieldA symmetric matrix
a + a.transpose()should have real eigenvaluessage: b = a + a.transpose() sage: ev = b.eigenvalues(); ev # needs sage.rings.number_field [-8.35066086057957?, -1.107247901349379?, 5.718651326708515?, 33.73925743522043?]
>>> from sage.all import * >>> b = a + a.transpose() >>> ev = b.eigenvalues(); ev # needs sage.rings.number_field [-8.35066086057957?, -1.107247901349379?, 5.718651326708515?, 33.73925743522043?]
b = a + a.transpose() ev = b.eigenvalues(); ev # needs sage.rings.number_field
The eigenvalues are elements of
QQbar, so they really represent exact roots of polynomials, not just approximations.sage: e = ev[0]; e # needs sage.rings.number_field -8.35066086057957? sage: p = e.minpoly(); p # needs sage.rings.number_field x^4 - 30*x^3 - 171*x^2 + 1460*x + 1784 sage: p(e) == 0 # needs sage.rings.number_field True
>>> from sage.all import * >>> e = ev[Integer(0)]; e # needs sage.rings.number_field -8.35066086057957? >>> p = e.minpoly(); p # needs sage.rings.number_field x^4 - 30*x^3 - 171*x^2 + 1460*x + 1784 >>> p(e) == Integer(0) # needs sage.rings.number_field True
e = ev[0]; e # needs sage.rings.number_field p = e.minpoly(); p # needs sage.rings.number_field p(e) == 0 # needs sage.rings.number_field
To perform computations on the eigenvalue as an element of a number field, you can always convert back to a number field element.
sage: e.as_number_field_element() # needs sage.rings.number_field (Number Field in a with defining polynomial y^4 - 2*y^3 - 507*y^2 - 3972*y - 4264, a + 7, Ring morphism: From: Number Field in a with defining polynomial y^4 - 2*y^3 - 507*y^2 - 3972*y - 4264 To: Algebraic Real Field Defn: a |--> -15.35066086057957?)
>>> from sage.all import * >>> e.as_number_field_element() # needs sage.rings.number_field (Number Field in a with defining polynomial y^4 - 2*y^3 - 507*y^2 - 3972*y - 4264, a + 7, Ring morphism: From: Number Field in a with defining polynomial y^4 - 2*y^3 - 507*y^2 - 3972*y - 4264 To: Algebraic Real Field Defn: a |--> -15.35066086057957?)
e.as_number_field_element() # needs sage.rings.number_field
Notice the effect of the
extendoption.sage: M = matrix(QQ, [[0,-1,0], [1,0,0], [0,0,2]]) sage: M.eigenvalues() # needs sage.rings.number_field [2, -1*I, 1*I] sage: M.eigenvalues(extend=False) # needs sage.libs.pari [2]
>>> from sage.all import * >>> M = matrix(QQ, [[Integer(0),-Integer(1),Integer(0)], [Integer(1),Integer(0),Integer(0)], [Integer(0),Integer(0),Integer(2)]]) >>> M.eigenvalues() # needs sage.rings.number_field [2, -1*I, 1*I] >>> M.eigenvalues(extend=False) # needs sage.libs.pari [2]
M = matrix(QQ, [[0,-1,0], [1,0,0], [0,0,2]]) M.eigenvalues() # needs sage.rings.number_field M.eigenvalues(extend=False) # needs sage.libs.pari
The method also works for matrices over finite fields:
sage: M = matrix(GF(3), [[0,1,1], [1,2,0], [2,0,1]]) sage: ev = sorted(M.eigenvalues()); ev # needs sage.rings.finite_rings [2*z3, 2*z3 + 1, 2*z3 + 2]
>>> from sage.all import * >>> M = matrix(GF(Integer(3)), [[Integer(0),Integer(1),Integer(1)], [Integer(1),Integer(2),Integer(0)], [Integer(2),Integer(0),Integer(1)]]) >>> ev = sorted(M.eigenvalues()); ev # needs sage.rings.finite_rings [2*z3, 2*z3 + 1, 2*z3 + 2]
M = matrix(GF(3), [[0,1,1], [1,2,0], [2,0,1]]) ev = sorted(M.eigenvalues()); ev # needs sage.rings.finite_rings
Similarly as in the case of
QQbar, the eigenvalues belong to some algebraic closure but they can be converted to elements of a finite field:sage: e = ev[0] # needs sage.rings.finite_rings sage: e.parent() # needs sage.rings.finite_rings Algebraic closure of Finite Field of size 3 sage: e.as_finite_field_element() # needs sage.rings.finite_rings (Finite Field in z3 of size 3^3, 2*z3, Ring morphism: From: Finite Field in z3 of size 3^3 To: Algebraic closure of Finite Field of size 3 Defn: z3 |--> z3)
>>> from sage.all import * >>> e = ev[Integer(0)] # needs sage.rings.finite_rings >>> e.parent() # needs sage.rings.finite_rings Algebraic closure of Finite Field of size 3 >>> e.as_finite_field_element() # needs sage.rings.finite_rings (Finite Field in z3 of size 3^3, 2*z3, Ring morphism: From: Finite Field in z3 of size 3^3 To: Algebraic closure of Finite Field of size 3 Defn: z3 |--> z3)
e = ev[0] # needs sage.rings.finite_rings e.parent() # needs sage.rings.finite_rings e.as_finite_field_element() # needs sage.rings.finite_rings
- eigenvectors_left(other=None, extend=True)[source]¶
Compute the left eigenvectors of a matrix.
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved (currently supported only if the base ring ofselfisRDForCDF)extend– boolean (default:True)
OUTPUT:
For each distinct eigenvalue, returns a list of the form (e,V,n) where e is the eigenvalue, V is a list of eigenvectors forming a basis for the corresponding left eigenspace, and n is the algebraic multiplicity of the eigenvalue.
If the option extend is set to False, then only the eigenvalues that live in the base ring are considered.
EXAMPLES:
We compute the left eigenvectors of a \(3\times 3\) rational matrix.
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: es = A.eigenvectors_left(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.3101020514433644?, -0.3797958971132713?)], 1), (13.34846922834954?, [(1, 1.289897948556636?, 1.579795897113272?)], 1)] sage: eval, [evec], mult = es[0] sage: delta = eval*evec - evec*A sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> es = A.eigenvectors_left(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.3101020514433644?, -0.3797958971132713?)], 1), (13.34846922834954?, [(1, 1.289897948556636?, 1.579795897113272?)], 1)] >>> eval, [evec], mult = es[Integer(0)] >>> delta = eval*evec - evec*A >>> abs(abs(delta)) < RealNumber('1e-10') True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A es = A.eigenvectors_left(); es eval, [evec], mult = es[0] delta = eval*evec - evec*A abs(abs(delta)) < 1e-10
Notice the difference between considering ring extensions or not.
sage: M = matrix(QQ, [[0,-1,0], [1,0,0], [0,0,2]]) sage: M.eigenvectors_left() # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1), (-1*I, [(1, -1*I, 0)], 1), (1*I, [(1, 1*I, 0)], 1)] sage: M.eigenvectors_left(extend=False) # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1)]
>>> from sage.all import * >>> M = matrix(QQ, [[Integer(0),-Integer(1),Integer(0)], [Integer(1),Integer(0),Integer(0)], [Integer(0),Integer(0),Integer(2)]]) >>> M.eigenvectors_left() # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1), (-1*I, [(1, -1*I, 0)], 1), (1*I, [(1, 1*I, 0)], 1)] >>> M.eigenvectors_left(extend=False) # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1)]
M = matrix(QQ, [[0,-1,0], [1,0,0], [0,0,2]]) M.eigenvectors_left() # needs sage.rings.number_field M.eigenvectors_left(extend=False) # needs sage.rings.number_field
- eigenvectors_right(other=None, extend=True)[source]¶
Compute the right eigenvectors of a matrix.
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved (currently supported only if the base ring ofselfisRDForCDF)extend– boolean (default:True)
OUTPUT:
For each distinct eigenvalue, returns a list of the form (e,V,n) where e is the eigenvalue, V is a list of eigenvectors forming a basis for the corresponding right eigenspace, and n is the algebraic multiplicity of the eigenvalue. If
extend = True(the default), this will return eigenspaces over the algebraic closure of the base field where this is implemented; otherwise it will restrict to eigenvalues in the base field.EXAMPLES:
We compute the right eigenvectors of a \(3\times 3\) rational matrix.
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: es = A.eigenvectors_right(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.1303061543300932?, -0.7393876913398137?)], 1), (13.34846922834954?, [(1, 3.069693845669907?, 5.139387691339814?)], 1)] sage: A.eigenvectors_right(extend=False) [(0, [ (1, -2, 1) ], 1)] sage: eval, [evec], mult = es[0] sage: delta = eval*evec - A*evec sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> es = A.eigenvectors_right(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.1303061543300932?, -0.7393876913398137?)], 1), (13.34846922834954?, [(1, 3.069693845669907?, 5.139387691339814?)], 1)] >>> A.eigenvectors_right(extend=False) [(0, [ (1, -2, 1) ], 1)] >>> eval, [evec], mult = es[Integer(0)] >>> delta = eval*evec - A*evec >>> abs(abs(delta)) < RealNumber('1e-10') True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A es = A.eigenvectors_right(); es A.eigenvectors_right(extend=False) eval, [evec], mult = es[0] delta = eval*evec - A*evec abs(abs(delta)) < 1e-10
- elementary_divisors(algorithm=None)[source]¶
If
selfis a matrix over a principal ideal domain \(R\), return elements \(d_i\) for \(1 \le i \le k = \min(r,s)\) where \(r\) and \(s\) are the number of rows and columns of self, such that the cokernel ofselfis isomorphic to\[R/(d_1) \oplus R/(d_2) \oplus R/(d_k)\]with \(d_i \mid d_{i+1}\) for all \(i\). These are the diagonal entries of the Smith form of
self(seesmith_form()).INPUT:
algorithm– ignored
EXAMPLES:
sage: x = polygen(ZZ, 'x') sage: OE.<w> = EquationOrder(x^2 - x + 2) # needs sage.rings.number_field sage: m = Matrix([[1, w], [w, 7]]) # needs sage.rings.number_field sage: m.elementary_divisors() # needs sage.rings.number_field [1, -w + 9]
>>> from sage.all import * >>> x = polygen(ZZ, 'x') >>> OE = EquationOrder(x**Integer(2) - x + Integer(2), names=('w',)); (w,) = OE._first_ngens(1)# needs sage.rings.number_field >>> m = Matrix([[Integer(1), w], [w, Integer(7)]]) # needs sage.rings.number_field >>> m.elementary_divisors() # needs sage.rings.number_field [1, -w + 9]
x = polygen(ZZ, 'x') OE.<w> = EquationOrder(x^2 - x + 2) # needs sage.rings.number_field m = Matrix([[1, w], [w, 7]]) # needs sage.rings.number_field m.elementary_divisors() # needs sage.rings.number_field
See also
- elementwise_product(right)[source]¶
Return the elementwise product of two matrices of the same size (also known as the Hadamard product).
INPUT:
right– the right operand of the product. A matrix of the same size asselfsuch that multiplication of elements of the base rings ofselfandrightis defined, once Sage’s coercion model is applied. If the matrices have different sizes, or if multiplication of individual entries cannot be achieved, aTypeErrorwill result.
OUTPUT:
A matrix of the same size as
selfandright. The entry in location \((i,j)\) of the output is the product of the two entries in location \((i,j)\) ofselfandright(in that order).The parent of the result is determined by Sage’s coercion model. If the base rings are identical, then the result is dense or sparse according to this property for the left operand. If the base rings must be adjusted for one, or both, matrices then the result will be sparse only if both operands are sparse. No subdivisions are present in the result.
If the type of the result is not to your liking, or the ring could be “tighter,” adjust the operands with
change_ring(). Adjust sparse versus dense inputs with the methodssparse_matrix()anddense_matrix().EXAMPLES:
sage: A = matrix(ZZ, 2, 3, range(6)) sage: B = matrix(QQ, 2, 3, [5, 1/3, 2/7, 11/2, -3/2, 8]) sage: C = A.elementwise_product(B) sage: C [ 0 1/3 4/7] [33/2 -6 40] sage: C.parent() Full MatrixSpace of 2 by 3 dense matrices over Rational Field
>>> from sage.all import * >>> A = matrix(ZZ, Integer(2), Integer(3), range(Integer(6))) >>> B = matrix(QQ, Integer(2), Integer(3), [Integer(5), Integer(1)/Integer(3), Integer(2)/Integer(7), Integer(11)/Integer(2), -Integer(3)/Integer(2), Integer(8)]) >>> C = A.elementwise_product(B) >>> C [ 0 1/3 4/7] [33/2 -6 40] >>> C.parent() Full MatrixSpace of 2 by 3 dense matrices over Rational Field
A = matrix(ZZ, 2, 3, range(6)) B = matrix(QQ, 2, 3, [5, 1/3, 2/7, 11/2, -3/2, 8]) C = A.elementwise_product(B) C C.parent()
Notice the base ring of the results in the next two examples.
sage: x = polygen(ZZ, 'x') sage: D = matrix(ZZ['x'],2,[1+x^2,2,3,4-x]) sage: E = matrix(QQ,2,[1,2,3,4]) sage: F = D.elementwise_product(E) sage: F [ x^2 + 1 4] [ 9 -4*x + 16] sage: F.parent() Full MatrixSpace of 2 by 2 dense matrices over Univariate Polynomial Ring in x over Rational Field
>>> from sage.all import * >>> x = polygen(ZZ, 'x') >>> D = matrix(ZZ['x'],Integer(2),[Integer(1)+x**Integer(2),Integer(2),Integer(3),Integer(4)-x]) >>> E = matrix(QQ,Integer(2),[Integer(1),Integer(2),Integer(3),Integer(4)]) >>> F = D.elementwise_product(E) >>> F [ x^2 + 1 4] [ 9 -4*x + 16] >>> F.parent() Full MatrixSpace of 2 by 2 dense matrices over Univariate Polynomial Ring in x over Rational Field
x = polygen(ZZ, 'x') D = matrix(ZZ['x'],2,[1+x^2,2,3,4-x]) E = matrix(QQ,2,[1,2,3,4]) F = D.elementwise_product(E) F F.parent()
sage: G = matrix(GF(3), 2, [0, 1, 2, 2]) sage: H = matrix(ZZ, 2, [1, 2, 3, 4]) sage: J = G.elementwise_product(H) sage: J [0 2] [0 2] sage: J.parent() Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 3
>>> from sage.all import * >>> G = matrix(GF(Integer(3)), Integer(2), [Integer(0), Integer(1), Integer(2), Integer(2)]) >>> H = matrix(ZZ, Integer(2), [Integer(1), Integer(2), Integer(3), Integer(4)]) >>> J = G.elementwise_product(H) >>> J [0 2] [0 2] >>> J.parent() Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 3
G = matrix(GF(3), 2, [0, 1, 2, 2]) H = matrix(ZZ, 2, [1, 2, 3, 4]) J = G.elementwise_product(H) J J.parent()
>>> from sage.all import * >>> G = matrix(GF(Integer(3)), Integer(2), [Integer(0), Integer(1), Integer(2), Integer(2)]) >>> H = matrix(ZZ, Integer(2), [Integer(1), Integer(2), Integer(3), Integer(4)]) >>> J = G.elementwise_product(H) >>> J [0 2] [0 2] >>> J.parent() Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 3
G = matrix(GF(3), 2, [0, 1, 2, 2]) H = matrix(ZZ, 2, [1, 2, 3, 4]) J = G.elementwise_product(H) J J.parent()
Non-commutative rings behave as expected. These are the usual quaternions.
sage: # needs sage.combinat sage: R.<i,j,k> = QuaternionAlgebra(-1, -1) sage: A = matrix(R, 2, [1,i,j,k]) sage: B = matrix(R, 2, [i,i,i,i]) sage: A.elementwise_product(B) [ i -1] [-k j] sage: B.elementwise_product(A) [ i -1] [ k -j]
>>> from sage.all import * >>> # needs sage.combinat >>> R = QuaternionAlgebra(-Integer(1), -Integer(1), names=('i', 'j', 'k',)); (i, j, k,) = R._first_ngens(3) >>> A = matrix(R, Integer(2), [Integer(1),i,j,k]) >>> B = matrix(R, Integer(2), [i,i,i,i]) >>> A.elementwise_product(B) [ i -1] [-k j] >>> B.elementwise_product(A) [ i -1] [ k -j]
# needs sage.combinat R.<i,j,k> = QuaternionAlgebra(-1, -1) A = matrix(R, 2, [1,i,j,k]) B = matrix(R, 2, [i,i,i,i]) A.elementwise_product(B) B.elementwise_product(A)
Input that is not a matrix will raise an error.
sage: A = random_matrix(ZZ, 5, 10, x=20) sage: A.elementwise_product(vector(ZZ, [1,2,3,4])) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 5 by 10 dense matrices over Integer Ring' and 'Ambient free module of rank 4 over the principal ideal domain Integer Ring' sage: A = matrix(2, 2, range(4)) sage: A.elementwise_product(polygen(parent(A))) Traceback (most recent call last): ... TypeError: elementwise_product() argument should be a matrix or coercible to a matrix
>>> from sage.all import * >>> A = random_matrix(ZZ, Integer(5), Integer(10), x=Integer(20)) >>> A.elementwise_product(vector(ZZ, [Integer(1),Integer(2),Integer(3),Integer(4)])) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 5 by 10 dense matrices over Integer Ring' and 'Ambient free module of rank 4 over the principal ideal domain Integer Ring' >>> A = matrix(Integer(2), Integer(2), range(Integer(4))) >>> A.elementwise_product(polygen(parent(A))) Traceback (most recent call last): ... TypeError: elementwise_product() argument should be a matrix or coercible to a matrix
A = random_matrix(ZZ, 5, 10, x=20) A.elementwise_product(vector(ZZ, [1,2,3,4])) A = matrix(2, 2, range(4)) A.elementwise_product(polygen(parent(A)))
Matrices of different sizes for operands will raise an error.
sage: A = random_matrix(ZZ, 5, 10, x=20) sage: B = random_matrix(ZZ, 10, 5, x=40) sage: A.elementwise_product(B) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 5 by 10 dense matrices over Integer Ring' and 'Full MatrixSpace of 10 by 5 dense matrices over Integer Ring'
>>> from sage.all import * >>> A = random_matrix(ZZ, Integer(5), Integer(10), x=Integer(20)) >>> B = random_matrix(ZZ, Integer(10), Integer(5), x=Integer(40)) >>> A.elementwise_product(B) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 5 by 10 dense matrices over Integer Ring' and 'Full MatrixSpace of 10 by 5 dense matrices over Integer Ring'
A = random_matrix(ZZ, 5, 10, x=20) B = random_matrix(ZZ, 10, 5, x=40) A.elementwise_product(B)
Some pairs of rings do not have a common parent where multiplication makes sense. This will raise an error.
sage: A = matrix(QQ, 3, 2, range(6)) sage: B = matrix(GF(3), 3, [2]*6) sage: A.elementwise_product(B) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 3 by 2 dense matrices over Rational Field' and 'Full MatrixSpace of 3 by 2 dense matrices over Finite Field of size 3'
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(2), range(Integer(6))) >>> B = matrix(GF(Integer(3)), Integer(3), [Integer(2)]*Integer(6)) >>> A.elementwise_product(B) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 3 by 2 dense matrices over Rational Field' and 'Full MatrixSpace of 3 by 2 dense matrices over Finite Field of size 3'
A = matrix(QQ, 3, 2, range(6)) B = matrix(GF(3), 3, [2]*6) A.elementwise_product(B)
We illustrate various combinations of sparse and dense matrices. The usual coercion rules apply:
sage: A = matrix(ZZ, 5, 6, range(30), sparse=False) sage: B = matrix(ZZ, 5, 6, range(30), sparse=True) sage: C = matrix(QQ, 5, 6, range(30), sparse=True) sage: A.elementwise_product(C).is_sparse() True sage: B.elementwise_product(C).is_sparse() True sage: A.elementwise_product(B).is_dense() True sage: B.elementwise_product(A).is_dense() True
>>> from sage.all import * >>> A = matrix(ZZ, Integer(5), Integer(6), range(Integer(30)), sparse=False) >>> B = matrix(ZZ, Integer(5), Integer(6), range(Integer(30)), sparse=True) >>> C = matrix(QQ, Integer(5), Integer(6), range(Integer(30)), sparse=True) >>> A.elementwise_product(C).is_sparse() True >>> B.elementwise_product(C).is_sparse() True >>> A.elementwise_product(B).is_dense() True >>> B.elementwise_product(A).is_dense() True
A = matrix(ZZ, 5, 6, range(30), sparse=False) B = matrix(ZZ, 5, 6, range(30), sparse=True) C = matrix(QQ, 5, 6, range(30), sparse=True) A.elementwise_product(C).is_sparse() B.elementwise_product(C).is_sparse() A.elementwise_product(B).is_dense() B.elementwise_product(A).is_dense()
- exp()[source]¶
Calculate the exponential of this matrix X, which is the matrix.
\[e^X = \sum_{k=0}^{\infty} \frac{X^k}{k!}.\]This function depends on maxima’s matrix exponentiation function, which does not deal well with floating point numbers. If the matrix has floating point numbers, they will be rounded automatically to rational numbers during the computation. If you want approximations to the exponential that are calculated numerically, you may get better results by first converting your matrix to RDF or CDF, as shown in the last example.
EXAMPLES:
sage: # needs sage.symbolic sage: a = matrix([[1,2], [3,4]]) sage: a.exp() [-1/22*((sqrt(33) - 11)*e^sqrt(33) - sqrt(33) - 11)*e^(-1/2*sqrt(33) + 5/2) 2/33*(sqrt(33)*e^sqrt(33) - sqrt(33))*e^(-1/2*sqrt(33) + 5/2)] [ 1/11*(sqrt(33)*e^sqrt(33) - sqrt(33))*e^(-1/2*sqrt(33) + 5/2) 1/22*((sqrt(33) + 11)*e^sqrt(33) - sqrt(33) + 11)*e^(-1/2*sqrt(33) + 5/2)] sage: type(a.exp()) # needs sage.symbolic <class 'sage.matrix.matrix_symbolic_dense.Matrix_symbolic_dense'> sage: a = matrix([[1/2,2/3], [3/4,4/5]]) sage: a.exp() # needs sage.symbolic [-1/418*((3*sqrt(209) - 209)*e^(1/10*sqrt(209)) - 3*sqrt(209) - 209)*e^(-1/20*sqrt(209) + 13/20) 20/627*(sqrt(209)*e^(1/10*sqrt(209)) - sqrt(209))*e^(-1/20*sqrt(209) + 13/20)] [ 15/418*(sqrt(209)*e^(1/10*sqrt(209)) - sqrt(209))*e^(-1/20*sqrt(209) + 13/20) 1/418*((3*sqrt(209) + 209)*e^(1/10*sqrt(209)) - 3*sqrt(209) + 209)*e^(-1/20*sqrt(209) + 13/20)] sage: a = matrix(RR, [[1,pi.n()], [1e2,1e-2]]) # needs sage.symbolic sage: a.exp() # needs sage.symbolic [ 1/11882424341266*((11*sqrt(227345670387496707609) + 5941212170633)*e^(3/1275529100*sqrt(227345670387496707609)) - 11*sqrt(227345670387496707609) + 5941212170633)*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200) 445243650/75781890129165569203*(sqrt(227345670387496707609)*e^(3/1275529100*sqrt(227345670387496707609)) - sqrt(227345670387496707609))*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200)] [ 10000/53470909535697*(sqrt(227345670387496707609)*e^(3/1275529100*sqrt(227345670387496707609)) - sqrt(227345670387496707609))*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200) -1/11882424341266*((11*sqrt(227345670387496707609) - 5941212170633)*e^(3/1275529100*sqrt(227345670387496707609)) - 11*sqrt(227345670387496707609) - 5941212170633)*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200)] sage: a.change_ring(RDF).exp() # rel tol 6e-14 # needs sage.symbolic [42748127.31532951 7368259.244159399] [234538976.1381042 40426191.45156228]
>>> from sage.all import * >>> # needs sage.symbolic >>> a = matrix([[Integer(1),Integer(2)], [Integer(3),Integer(4)]]) >>> a.exp() [-1/22*((sqrt(33) - 11)*e^sqrt(33) - sqrt(33) - 11)*e^(-1/2*sqrt(33) + 5/2) 2/33*(sqrt(33)*e^sqrt(33) - sqrt(33))*e^(-1/2*sqrt(33) + 5/2)] [ 1/11*(sqrt(33)*e^sqrt(33) - sqrt(33))*e^(-1/2*sqrt(33) + 5/2) 1/22*((sqrt(33) + 11)*e^sqrt(33) - sqrt(33) + 11)*e^(-1/2*sqrt(33) + 5/2)] >>> type(a.exp()) # needs sage.symbolic <class 'sage.matrix.matrix_symbolic_dense.Matrix_symbolic_dense'> >>> a = matrix([[Integer(1)/Integer(2),Integer(2)/Integer(3)], [Integer(3)/Integer(4),Integer(4)/Integer(5)]]) >>> a.exp() # needs sage.symbolic [-1/418*((3*sqrt(209) - 209)*e^(1/10*sqrt(209)) - 3*sqrt(209) - 209)*e^(-1/20*sqrt(209) + 13/20) 20/627*(sqrt(209)*e^(1/10*sqrt(209)) - sqrt(209))*e^(-1/20*sqrt(209) + 13/20)] [ 15/418*(sqrt(209)*e^(1/10*sqrt(209)) - sqrt(209))*e^(-1/20*sqrt(209) + 13/20) 1/418*((3*sqrt(209) + 209)*e^(1/10*sqrt(209)) - 3*sqrt(209) + 209)*e^(-1/20*sqrt(209) + 13/20)] >>> a = matrix(RR, [[Integer(1),pi.n()], [RealNumber('1e2'),RealNumber('1e-2')]]) # needs sage.symbolic >>> a.exp() # needs sage.symbolic [ 1/11882424341266*((11*sqrt(227345670387496707609) + 5941212170633)*e^(3/1275529100*sqrt(227345670387496707609)) - 11*sqrt(227345670387496707609) + 5941212170633)*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200) 445243650/75781890129165569203*(sqrt(227345670387496707609)*e^(3/1275529100*sqrt(227345670387496707609)) - sqrt(227345670387496707609))*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200)] [ 10000/53470909535697*(sqrt(227345670387496707609)*e^(3/1275529100*sqrt(227345670387496707609)) - sqrt(227345670387496707609))*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200) -1/11882424341266*((11*sqrt(227345670387496707609) - 5941212170633)*e^(3/1275529100*sqrt(227345670387496707609)) - 11*sqrt(227345670387496707609) - 5941212170633)*e^(-3/2551058200*sqrt(227345670387496707609) + 101/200)] >>> a.change_ring(RDF).exp() # rel tol 6e-14 # needs sage.symbolic [42748127.31532951 7368259.244159399] [234538976.1381042 40426191.45156228]
# needs sage.symbolic a = matrix([[1,2], [3,4]]) a.exp() type(a.exp()) # needs sage.symbolic a = matrix([[1/2,2/3], [3/4,4/5]]) a.exp() # needs sage.symbolic a = matrix(RR, [[1,pi.n()], [1e2,1e-2]]) # needs sage.symbolic a.exp() # needs sage.symbolic a.change_ring(RDF).exp() # rel tol 6e-14 # needs sage.symbolic
- extended_echelon_form(subdivide=False, **kwds)[source]¶
Return the echelon form of
selfaugmented with an identity matrix.INPUT:
subdivide– boolean (default:False); whether to subdivide the returned matrix. See the description of the (output) below for details.kwds– additional keywords that can be passed to the method that computes the echelon form
OUTPUT:
If \(A\) is an \(m\times n\) matrix, add the \(m\) columns of an \(m\times m\) identity matrix to the right of
self. Then row-reduce this \(m\times(n+m)\) matrix. This matrix is returned as an immutable matrix.If
subdivideisTruethen the returned matrix has a single division among the columns and a single division among the rows. The column subdivision has \(n\) columns to the left and \(m\) columns to the right. The row division separates the nonzero rows from the zero rows, when restricted to the first \(n\) columns.For a nonsingular matrix the final \(m\) columns of the extended echelon form are the inverse of
self. For a matrix of any size, the final \(m\) columns provide a matrix that transformsselfto echelon form when it multipliesselffrom the left. When the base ring is a field, the uniqueness of reduced row-echelon form implies that this transformation matrix can be taken as the coefficients giving a canonical set of linear combinations of the rows ofselfthat yield reduced row-echelon form.When subdivided as described above, and again over a field, the parts of the subdivision in the upper-left corner and lower-right corner satisfy several interesting relationships with the row space, column space, left kernel and right kernel of
self. See the examples below.Note
This method returns an echelon form. If the base ring is not a field, no attempt is made to move to the fraction field. See an example below where the base ring is changed manually.
EXAMPLES:
The four relationships at the end of this example hold in general.
sage: A = matrix(QQ, [[2, -1, 7, -1, 0, -3], ....: [-1, 1, -5, 3, 4, 4], ....: [2, -1, 7, 0, 2, -2], ....: [2, 0, 4, 3, 6, 1], ....: [2, -1, 7, 0, 2, -2]]) sage: E = A.extended_echelon_form(subdivide=True); E [ 1 0 2 0 0 -1| 0 -1 0 1 -1] [ 0 1 -3 0 -2 0| 0 -2 0 2 -3] [ 0 0 0 1 2 1| 0 2/3 0 -1/3 2/3] [-----------------------------+------------------------] [ 0 0 0 0 0 0| 1 2/3 0 -1/3 -1/3] [ 0 0 0 0 0 0| 0 0 1 0 -1] sage: J = E.matrix_from_columns(range(6,11)); J [ 0 -1 0 1 -1] [ 0 -2 0 2 -3] [ 0 2/3 0 -1/3 2/3] [ 1 2/3 0 -1/3 -1/3] [ 0 0 1 0 -1] sage: J*A == A.rref() True sage: C = E.subdivision(0,0); C [ 1 0 2 0 0 -1] [ 0 1 -3 0 -2 0] [ 0 0 0 1 2 1] sage: L = E.subdivision(1,1); L [ 1 2/3 0 -1/3 -1/3] [ 0 0 1 0 -1] sage: A.right_kernel() == C.right_kernel() True sage: A.row_space() == C.row_space() True sage: A.column_space() == L.right_kernel() True sage: A.left_kernel() == L.row_space() True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(2), -Integer(1), Integer(7), -Integer(1), Integer(0), -Integer(3)], ... [-Integer(1), Integer(1), -Integer(5), Integer(3), Integer(4), Integer(4)], ... [Integer(2), -Integer(1), Integer(7), Integer(0), Integer(2), -Integer(2)], ... [Integer(2), Integer(0), Integer(4), Integer(3), Integer(6), Integer(1)], ... [Integer(2), -Integer(1), Integer(7), Integer(0), Integer(2), -Integer(2)]]) >>> E = A.extended_echelon_form(subdivide=True); E [ 1 0 2 0 0 -1| 0 -1 0 1 -1] [ 0 1 -3 0 -2 0| 0 -2 0 2 -3] [ 0 0 0 1 2 1| 0 2/3 0 -1/3 2/3] [-----------------------------+------------------------] [ 0 0 0 0 0 0| 1 2/3 0 -1/3 -1/3] [ 0 0 0 0 0 0| 0 0 1 0 -1] >>> J = E.matrix_from_columns(range(Integer(6),Integer(11))); J [ 0 -1 0 1 -1] [ 0 -2 0 2 -3] [ 0 2/3 0 -1/3 2/3] [ 1 2/3 0 -1/3 -1/3] [ 0 0 1 0 -1] >>> J*A == A.rref() True >>> C = E.subdivision(Integer(0),Integer(0)); C [ 1 0 2 0 0 -1] [ 0 1 -3 0 -2 0] [ 0 0 0 1 2 1] >>> L = E.subdivision(Integer(1),Integer(1)); L [ 1 2/3 0 -1/3 -1/3] [ 0 0 1 0 -1] >>> A.right_kernel() == C.right_kernel() True >>> A.row_space() == C.row_space() True >>> A.column_space() == L.right_kernel() True >>> A.left_kernel() == L.row_space() True
A = matrix(QQ, [[2, -1, 7, -1, 0, -3], [-1, 1, -5, 3, 4, 4], [2, -1, 7, 0, 2, -2], [2, 0, 4, 3, 6, 1], [2, -1, 7, 0, 2, -2]]) E = A.extended_echelon_form(subdivide=True); E J = E.matrix_from_columns(range(6,11)); J J*A == A.rref() C = E.subdivision(0,0); C L = E.subdivision(1,1); L A.right_kernel() == C.right_kernel() A.row_space() == C.row_space() A.column_space() == L.right_kernel() A.left_kernel() == L.row_space()For a nonsingular matrix, the right half of the extended echelon form is the inverse matrix.
sage: B = matrix(QQ, [[1,3,4], [1,4,4], [0,-2,-1]]) sage: E = B.extended_echelon_form() sage: J = E.matrix_from_columns(range(3,6)); J [-4 5 4] [-1 1 0] [ 2 -2 -1] sage: J == B.inverse() True
>>> from sage.all import * >>> B = matrix(QQ, [[Integer(1),Integer(3),Integer(4)], [Integer(1),Integer(4),Integer(4)], [Integer(0),-Integer(2),-Integer(1)]]) >>> E = B.extended_echelon_form() >>> J = E.matrix_from_columns(range(Integer(3),Integer(6))); J [-4 5 4] [-1 1 0] [ 2 -2 -1] >>> J == B.inverse() True
B = matrix(QQ, [[1,3,4], [1,4,4], [0,-2,-1]]) E = B.extended_echelon_form() J = E.matrix_from_columns(range(3,6)); J J == B.inverse()
The result is in echelon form, so if the base ring is not a field, the leading entry of each row may not be 1. But you can easily change to the fraction field if necessary.
sage: A = matrix(ZZ, [[16, 20, 4, 5, -4, 13, 5], ....: [10, 13, 3, -3, 7, 11, 6], ....: [-12, -15, -3, -3, 2, -10, -4], ....: [10, 13, 3, 3, -1, 9, 4], ....: [4, 5, 1, 8, -10, 1, -1]]) sage: E = A.extended_echelon_form(subdivide=True); E [ 2 0 -2 2 -9 -3 -4| 0 4 -3 -9 4] [ 0 1 1 2 0 1 1| 0 1 2 1 1] [ 0 0 0 3 -4 -1 -1| 0 3 1 -3 3] [--------------------+--------------] [ 0 0 0 0 0 0 0| 1 6 3 -6 5] [ 0 0 0 0 0 0 0| 0 7 2 -7 6] sage: J = E.matrix_from_columns(range(7,12)); J [ 0 4 -3 -9 4] [ 0 1 2 1 1] [ 0 3 1 -3 3] [ 1 6 3 -6 5] [ 0 7 2 -7 6] sage: J*A == A.echelon_form() True sage: B = A.change_ring(QQ) sage: B.extended_echelon_form(subdivide=True) [ 1 0 -1 0 -19/6 -7/6 -5/3| 0 0 -89/42 -5/2 1/7] [ 0 1 1 0 8/3 5/3 5/3| 0 0 34/21 2 -1/7] [ 0 0 0 1 -4/3 -1/3 -1/3| 0 0 1/21 0 1/7] [------------------------------------------------+----------------------------------] [ 0 0 0 0 0 0 0| 1 0 9/7 0 -1/7] [ 0 0 0 0 0 0 0| 0 1 2/7 -1 6/7]
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(16), Integer(20), Integer(4), Integer(5), -Integer(4), Integer(13), Integer(5)], ... [Integer(10), Integer(13), Integer(3), -Integer(3), Integer(7), Integer(11), Integer(6)], ... [-Integer(12), -Integer(15), -Integer(3), -Integer(3), Integer(2), -Integer(10), -Integer(4)], ... [Integer(10), Integer(13), Integer(3), Integer(3), -Integer(1), Integer(9), Integer(4)], ... [Integer(4), Integer(5), Integer(1), Integer(8), -Integer(10), Integer(1), -Integer(1)]]) >>> E = A.extended_echelon_form(subdivide=True); E [ 2 0 -2 2 -9 -3 -4| 0 4 -3 -9 4] [ 0 1 1 2 0 1 1| 0 1 2 1 1] [ 0 0 0 3 -4 -1 -1| 0 3 1 -3 3] [--------------------+--------------] [ 0 0 0 0 0 0 0| 1 6 3 -6 5] [ 0 0 0 0 0 0 0| 0 7 2 -7 6] >>> J = E.matrix_from_columns(range(Integer(7),Integer(12))); J [ 0 4 -3 -9 4] [ 0 1 2 1 1] [ 0 3 1 -3 3] [ 1 6 3 -6 5] [ 0 7 2 -7 6] >>> J*A == A.echelon_form() True >>> B = A.change_ring(QQ) >>> B.extended_echelon_form(subdivide=True) [ 1 0 -1 0 -19/6 -7/6 -5/3| 0 0 -89/42 -5/2 1/7] [ 0 1 1 0 8/3 5/3 5/3| 0 0 34/21 2 -1/7] [ 0 0 0 1 -4/3 -1/3 -1/3| 0 0 1/21 0 1/7] [------------------------------------------------+----------------------------------] [ 0 0 0 0 0 0 0| 1 0 9/7 0 -1/7] [ 0 0 0 0 0 0 0| 0 1 2/7 -1 6/7]
A = matrix(ZZ, [[16, 20, 4, 5, -4, 13, 5], [10, 13, 3, -3, 7, 11, 6], [-12, -15, -3, -3, 2, -10, -4], [10, 13, 3, 3, -1, 9, 4], [4, 5, 1, 8, -10, 1, -1]]) E = A.extended_echelon_form(subdivide=True); E J = E.matrix_from_columns(range(7,12)); J J*A == A.echelon_form() B = A.change_ring(QQ) B.extended_echelon_form(subdivide=True)Subdivided, or not, the result is immutable, so make a copy if you want to make changes.
sage: A = matrix(FiniteField(7), [[2,0,3], [5,5,3], [5,6,5]]) sage: E = A.extended_echelon_form() sage: E.is_mutable() False sage: F = A.extended_echelon_form(subdivide=True) sage: F [1 0 0|0 4 6] [0 1 0|4 2 2] [0 0 1|5 2 3] [-----+-----] sage: F.is_mutable() False sage: G = copy(F) sage: G.subdivide([], []); G [1 0 0 0 4 6] [0 1 0 4 2 2] [0 0 1 5 2 3]
>>> from sage.all import * >>> A = matrix(FiniteField(Integer(7)), [[Integer(2),Integer(0),Integer(3)], [Integer(5),Integer(5),Integer(3)], [Integer(5),Integer(6),Integer(5)]]) >>> E = A.extended_echelon_form() >>> E.is_mutable() False >>> F = A.extended_echelon_form(subdivide=True) >>> F [1 0 0|0 4 6] [0 1 0|4 2 2] [0 0 1|5 2 3] [-----+-----] >>> F.is_mutable() False >>> G = copy(F) >>> G.subdivide([], []); G [1 0 0 0 4 6] [0 1 0 4 2 2] [0 0 1 5 2 3]
A = matrix(FiniteField(7), [[2,0,3], [5,5,3], [5,6,5]]) E = A.extended_echelon_form() E.is_mutable() F = A.extended_echelon_form(subdivide=True) F F.is_mutable() G = copy(F) G.subdivide([], []); G
If you want to determine exactly which algorithm is used to compute the echelon form, you can add additional keywords to pass on to the
echelon_form()routine employed on the augmented matrix. Sending the flaginclude_zero_rowsis a bit silly, since the extended echelon form will never have any zero rows.sage: A = matrix(ZZ, [[1,2], [5,0], [5,9]]) sage: E = A.extended_echelon_form(algorithm='padic', include_zero_rows=False) sage: E [ 1 0 36 1 -8] [ 0 1 5 0 -1] [ 0 0 45 1 -10]
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(1),Integer(2)], [Integer(5),Integer(0)], [Integer(5),Integer(9)]]) >>> E = A.extended_echelon_form(algorithm='padic', include_zero_rows=False) >>> E [ 1 0 36 1 -8] [ 0 1 5 0 -1] [ 0 0 45 1 -10]
A = matrix(ZZ, [[1,2], [5,0], [5,9]]) E = A.extended_echelon_form(algorithm='padic', include_zero_rows=False) E
- fcp(var='x')[source]¶
Return the factorization of the characteristic polynomial of
self.INPUT:
var– (default:'x') name of variable of charpoly
EXAMPLES:
sage: M = MatrixSpace(QQ, 3, 3) sage: A = M([1,9,-7, 4/5,4,3, 6,4,3]) sage: A.fcp() # needs sage.libs.pari x^3 - 8*x^2 + 209/5*x - 286 sage: A = M([3, 0, -2, 0, -2, 0, 0, 0, 0]) sage: A.fcp('T') # needs sage.libs.pari (T - 3) * T * (T + 2)
>>> from sage.all import * >>> M = MatrixSpace(QQ, Integer(3), Integer(3)) >>> A = M([Integer(1),Integer(9),-Integer(7), Integer(4)/Integer(5),Integer(4),Integer(3), Integer(6),Integer(4),Integer(3)]) >>> A.fcp() # needs sage.libs.pari x^3 - 8*x^2 + 209/5*x - 286 >>> A = M([Integer(3), Integer(0), -Integer(2), Integer(0), -Integer(2), Integer(0), Integer(0), Integer(0), Integer(0)]) >>> A.fcp('T') # needs sage.libs.pari (T - 3) * T * (T + 2)
M = MatrixSpace(QQ, 3, 3) A = M([1,9,-7, 4/5,4,3, 6,4,3]) A.fcp() # needs sage.libs.pari A = M([3, 0, -2, 0, -2, 0, 0, 0, 0]) A.fcp('T') # needs sage.libs.pari
- find(f, indices=False)[source]¶
Find elements in this matrix satisfying the constraints in the function \(f\). The function is evaluated on each element of the matrix .
INPUT:
f– a function that is evaluated on each element of this matrixindices– whether or not to return the indices and elements of this matrix that satisfy the function
OUTPUT: if
indicesis not specified, return a matrix with 1 where \(f\) is satisfied and 0 where it is not. Ifindicesis specified, return a dictionary containing the elements of this matrix satisfying \(f\).EXAMPLES:
sage: M = matrix(4,3,[1, -1/2, -1, 1, -1, -1/2, -1, 0, 0, 2, 0, 1]) sage: M.find(lambda entry: entry == 0) [0 0 0] [0 0 0] [0 1 1] [0 1 0]
>>> from sage.all import * >>> M = matrix(Integer(4),Integer(3),[Integer(1), -Integer(1)/Integer(2), -Integer(1), Integer(1), -Integer(1), -Integer(1)/Integer(2), -Integer(1), Integer(0), Integer(0), Integer(2), Integer(0), Integer(1)]) >>> M.find(lambda entry: entry == Integer(0)) [0 0 0] [0 0 0] [0 1 1] [0 1 0]
M = matrix(4,3,[1, -1/2, -1, 1, -1, -1/2, -1, 0, 0, 2, 0, 1]) M.find(lambda entry: entry == 0)
sage: M.find(lambda u: u < 0) [0 1 1] [0 1 1] [1 0 0] [0 0 0]
>>> from sage.all import * >>> M.find(lambda u: u < Integer(0)) [0 1 1] [0 1 1] [1 0 0] [0 0 0]
M.find(lambda u: u < 0)
>>> from sage.all import * >>> M.find(lambda u: u < Integer(0)) [0 1 1] [0 1 1] [1 0 0] [0 0 0]
M.find(lambda u: u < 0)
sage: M = matrix(4,3,[1, -1/2, -1, 1, -1, -1/2, -1, 0, 0, 2, 0, 1]) sage: len(M.find(lambda u:u<1 and u>-1,indices=True)) 5
>>> from sage.all import * >>> M = matrix(Integer(4),Integer(3),[Integer(1), -Integer(1)/Integer(2), -Integer(1), Integer(1), -Integer(1), -Integer(1)/Integer(2), -Integer(1), Integer(0), Integer(0), Integer(2), Integer(0), Integer(1)]) >>> len(M.find(lambda u:u<Integer(1) and u>-Integer(1),indices=True)) 5
M = matrix(4,3,[1, -1/2, -1, 1, -1, -1/2, -1, 0, 0, 2, 0, 1]) len(M.find(lambda u:u<1 and u>-1,indices=True))
>>> from sage.all import * >>> M = matrix(Integer(4),Integer(3),[Integer(1), -Integer(1)/Integer(2), -Integer(1), Integer(1), -Integer(1), -Integer(1)/Integer(2), -Integer(1), Integer(0), Integer(0), Integer(2), Integer(0), Integer(1)]) >>> len(M.find(lambda u:u<Integer(1) and u>-Integer(1),indices=True)) 5
M = matrix(4,3,[1, -1/2, -1, 1, -1, -1/2, -1, 0, 0, 2, 0, 1]) len(M.find(lambda u:u<1 and u>-1,indices=True))
sage: M.find(lambda u: u != 1/2) [1 1 1] [1 1 1] [1 1 1] [1 1 1]
>>> from sage.all import * >>> M.find(lambda u: u != Integer(1)/Integer(2)) [1 1 1] [1 1 1] [1 1 1] [1 1 1]
M.find(lambda u: u != 1/2)
>>> from sage.all import * >>> M.find(lambda u: u != Integer(1)/Integer(2)) [1 1 1] [1 1 1] [1 1 1] [1 1 1]
M.find(lambda u: u != 1/2)
sage: M.find(lambda u: u > 1.2) [0 0 0] [0 0 0] [0 0 0] [1 0 0]
>>> from sage.all import * >>> M.find(lambda u: u > RealNumber('1.2')) [0 0 0] [0 0 0] [0 0 0] [1 0 0]
M.find(lambda u: u > 1.2)
>>> from sage.all import * >>> M.find(lambda u: u > RealNumber('1.2')) [0 0 0] [0 0 0] [0 0 0] [1 0 0]
M.find(lambda u: u > 1.2)
sage: sorted(M.find(lambda u: u != 0, indices=True).keys()) == M.nonzero_positions() True
>>> from sage.all import * >>> sorted(M.find(lambda u: u != Integer(0), indices=True).keys()) == M.nonzero_positions() True
sorted(M.find(lambda u: u != 0, indices=True).keys()) == M.nonzero_positions()
>>> from sage.all import * >>> sorted(M.find(lambda u: u != Integer(0), indices=True).keys()) == M.nonzero_positions() True
sorted(M.find(lambda u: u != 0, indices=True).keys()) == M.nonzero_positions()
- fitting_ideal(i)[source]¶
Return the \(i\)-th Fitting ideal of the matrix. This is the ideal generated by the \(n - i\) minors, where \(n\) is the number of columns.
INPUT:
i– integer
OUTPUT: an ideal on the base ring
EXAMPLES:
sage: R.<x,y,z> = QQ[] sage: M = matrix(R, [[2*x-z, 0, y-z^2, 1], [0, z - y, z - x, 0],[z - y, x^2 - y, 0, 0]]) sage: M [ 2*x - z 0 -z^2 + y 1] [ 0 -y + z -x + z 0] [ -y + z x^2 - y 0 0] sage: [R.ideal(M.minors(i)) == M.fitting_ideal(4-i) for i in range(5)] [True, True, True, True, True] sage: M.fitting_ideal(0) Ideal (0) of Multivariate Polynomial Ring in x, y, z over Rational Field sage: M.fitting_ideal(1) Ideal (2*x^4 - 3*x^3*z + x^2*z^2 + y^2*z^2 - 2*y*z^3 + z^4 - 2*x^2*y - y^3 + 3*x*y*z + 2*y^2*z - 2*y*z^2, -x^3 + x^2*z + x*y - y*z, y^2 - 2*y*z + z^2, x*y - x*z - y*z + z^2) of Multivariate Polynomial Ring in x, y, z over Rational Field sage: M.fitting_ideal(3) Ideal (2*x - z, -z^2 + y, 1, -y + z, -x + z, -y + z, x^2 - y) of Multivariate Polynomial Ring in x, y, z over Rational Field sage: M.fitting_ideal(4) Ideal (1) of Multivariate Polynomial Ring in x, y, z over Rational Field
>>> from sage.all import * >>> R = QQ['x, y, z']; (x, y, z,) = R._first_ngens(3) >>> M = matrix(R, [[Integer(2)*x-z, Integer(0), y-z**Integer(2), Integer(1)], [Integer(0), z - y, z - x, Integer(0)],[z - y, x**Integer(2) - y, Integer(0), Integer(0)]]) >>> M [ 2*x - z 0 -z^2 + y 1] [ 0 -y + z -x + z 0] [ -y + z x^2 - y 0 0] >>> [R.ideal(M.minors(i)) == M.fitting_ideal(Integer(4)-i) for i in range(Integer(5))] [True, True, True, True, True] >>> M.fitting_ideal(Integer(0)) Ideal (0) of Multivariate Polynomial Ring in x, y, z over Rational Field >>> M.fitting_ideal(Integer(1)) Ideal (2*x^4 - 3*x^3*z + x^2*z^2 + y^2*z^2 - 2*y*z^3 + z^4 - 2*x^2*y - y^3 + 3*x*y*z + 2*y^2*z - 2*y*z^2, -x^3 + x^2*z + x*y - y*z, y^2 - 2*y*z + z^2, x*y - x*z - y*z + z^2) of Multivariate Polynomial Ring in x, y, z over Rational Field >>> M.fitting_ideal(Integer(3)) Ideal (2*x - z, -z^2 + y, 1, -y + z, -x + z, -y + z, x^2 - y) of Multivariate Polynomial Ring in x, y, z over Rational Field >>> M.fitting_ideal(Integer(4)) Ideal (1) of Multivariate Polynomial Ring in x, y, z over Rational Field
R.<x,y,z> = QQ[] M = matrix(R, [[2*x-z, 0, y-z^2, 1], [0, z - y, z - x, 0],[z - y, x^2 - y, 0, 0]]) M [R.ideal(M.minors(i)) == M.fitting_ideal(4-i) for i in range(5)] M.fitting_ideal(0) M.fitting_ideal(1) M.fitting_ideal(3) M.fitting_ideal(4)
If the base ring is a field, the Fitting ideals are zero under the corank:
sage: M = matrix(QQ, [[2,1,3,5],[4,2,6,6],[0,3,2,0]]) sage: M [2 1 3 5] [4 2 6 6] [0 3 2 0] sage: M.fitting_ideal(0) Principal ideal (0) of Rational Field sage: M.fitting_ideal(1) Principal ideal (1) of Rational Field sage: M.fitting_ideal(2) Principal ideal (1) of Rational Field sage: M.fitting_ideal(3) Principal ideal (1) of Rational Field sage: M.fitting_ideal(4) Principal ideal (1) of Rational Field
>>> from sage.all import * >>> M = matrix(QQ, [[Integer(2),Integer(1),Integer(3),Integer(5)],[Integer(4),Integer(2),Integer(6),Integer(6)],[Integer(0),Integer(3),Integer(2),Integer(0)]]) >>> M [2 1 3 5] [4 2 6 6] [0 3 2 0] >>> M.fitting_ideal(Integer(0)) Principal ideal (0) of Rational Field >>> M.fitting_ideal(Integer(1)) Principal ideal (1) of Rational Field >>> M.fitting_ideal(Integer(2)) Principal ideal (1) of Rational Field >>> M.fitting_ideal(Integer(3)) Principal ideal (1) of Rational Field >>> M.fitting_ideal(Integer(4)) Principal ideal (1) of Rational Field
M = matrix(QQ, [[2,1,3,5],[4,2,6,6],[0,3,2,0]]) M M.fitting_ideal(0) M.fitting_ideal(1) M.fitting_ideal(2) M.fitting_ideal(3) M.fitting_ideal(4)
In the case of principal ideal domains, it is given by the elementary divisors:
sage: M = matrix([[2,1,3,5],[4,2,6,6],[0,3,2,0]]) sage: M [2 1 3 5] [4 2 6 6] [0 3 2 0] sage: M.fitting_ideal(0) Principal ideal (0) of Integer Ring sage: M.fitting_ideal(1) Principal ideal (4) of Integer Ring sage: M.fitting_ideal(2) Principal ideal (1) of Integer Ring sage: M.fitting_ideal(3) Principal ideal (1) of Integer Ring sage: M.fitting_ideal(4) Principal ideal (1) of Integer Ring sage: M.elementary_divisors() [1, 1, 4]
>>> from sage.all import * >>> M = matrix([[Integer(2),Integer(1),Integer(3),Integer(5)],[Integer(4),Integer(2),Integer(6),Integer(6)],[Integer(0),Integer(3),Integer(2),Integer(0)]]) >>> M [2 1 3 5] [4 2 6 6] [0 3 2 0] >>> M.fitting_ideal(Integer(0)) Principal ideal (0) of Integer Ring >>> M.fitting_ideal(Integer(1)) Principal ideal (4) of Integer Ring >>> M.fitting_ideal(Integer(2)) Principal ideal (1) of Integer Ring >>> M.fitting_ideal(Integer(3)) Principal ideal (1) of Integer Ring >>> M.fitting_ideal(Integer(4)) Principal ideal (1) of Integer Ring >>> M.elementary_divisors() [1, 1, 4]
M = matrix([[2,1,3,5],[4,2,6,6],[0,3,2,0]]) M M.fitting_ideal(0) M.fitting_ideal(1) M.fitting_ideal(2) M.fitting_ideal(3) M.fitting_ideal(4) M.elementary_divisors()
This is also true for univariate polynomials over a field:
sage: R.<x> = QQ[] sage: M = matrix(R,[[x^2-2*x+1, x-1,x^2-1],[0,x+1,1]]) sage: M.fitting_ideal(0) Principal ideal (0) of Univariate Polynomial Ring in x over Rational Field sage: M.fitting_ideal(1) Principal ideal (x - 1) of Univariate Polynomial Ring in x over Rational Field sage: M.fitting_ideal(2) Principal ideal (1) of Univariate Polynomial Ring in x over Rational Field sage: M.smith_form()[0] [ 1 0 0] [ 0 x - 1 0]
>>> from sage.all import * >>> R = QQ['x']; (x,) = R._first_ngens(1) >>> M = matrix(R,[[x**Integer(2)-Integer(2)*x+Integer(1), x-Integer(1),x**Integer(2)-Integer(1)],[Integer(0),x+Integer(1),Integer(1)]]) >>> M.fitting_ideal(Integer(0)) Principal ideal (0) of Univariate Polynomial Ring in x over Rational Field >>> M.fitting_ideal(Integer(1)) Principal ideal (x - 1) of Univariate Polynomial Ring in x over Rational Field >>> M.fitting_ideal(Integer(2)) Principal ideal (1) of Univariate Polynomial Ring in x over Rational Field >>> M.smith_form()[Integer(0)] [ 1 0 0] [ 0 x - 1 0]
R.<x> = QQ[] M = matrix(R,[[x^2-2*x+1, x-1,x^2-1],[0,x+1,1]]) M.fitting_ideal(0) M.fitting_ideal(1) M.fitting_ideal(2) M.smith_form()[0]
- get_subdivisions()[source]¶
Return the current subdivision of
self.EXAMPLES:
sage: M = matrix(5, 5, range(25)) sage: M.subdivisions() ([], []) sage: M.subdivide(2,3) sage: M.subdivisions() ([2], [3]) sage: N = M.parent()(1) sage: N.subdivide(M.subdivisions()); N [1 0 0|0 0] [0 1 0|0 0] [-----+---] [0 0 1|0 0] [0 0 0|1 0] [0 0 0|0 1]
>>> from sage.all import * >>> M = matrix(Integer(5), Integer(5), range(Integer(25))) >>> M.subdivisions() ([], []) >>> M.subdivide(Integer(2),Integer(3)) >>> M.subdivisions() ([2], [3]) >>> N = M.parent()(Integer(1)) >>> N.subdivide(M.subdivisions()); N [1 0 0|0 0] [0 1 0|0 0] [-----+---] [0 0 1|0 0] [0 0 0|1 0] [0 0 0|0 1]
M = matrix(5, 5, range(25)) M.subdivisions() M.subdivide(2,3) M.subdivisions() N = M.parent()(1) N.subdivide(M.subdivisions()); N
- gram_schmidt(orthonormal=False)[source]¶
Perform Gram-Schmidt orthogonalization on the rows of the matrix, returning a new matrix and a matrix accomplishing the transformation.
INPUT:
self– a matrix whose rows are to be orthogonalizedorthonormal– (default:False) ifTruethe returned orthogonal vectors are unit vectors. This keyword is ignored if the matrix is overRDForCDFand the results are always orthonormal.
OUTPUT:
A pair of matrices,
GandMsuch that ifArepresentsself, where the parenthetical properties occur whenorthonormal = True:A = M*GThe rows of
Gare an orthogonal (resp. orthonormal) set of vectorsGtimes the conjugate-transpose ofGis a diagonal (resp. identity) matrixThe row space of
Gequals the row space ofAMis a full-rank matrix with zeros above the diagonal
For exact rings, any zero vectors produced (when the original vectors are linearly dependent) are not output, thus the orthonormal set is linearly independent, and thus a basis for the row space of the original matrix.
Any notion of a Gram-Schmidt procedure requires that the base ring of the matrix has a fraction field implemented. In order to arrive at an orthonormal set, it must be possible to construct square roots of the elements of the base field. In Sage, your best option is the field of algebraic numbers,
QQbar, which properly contains the rationals and number fields.If you have an approximate numerical matrix, then this routine requires that your base field be the real and complex double-precision floating point numbers,
RDFandCDF. In this case, the matrix is treated as having full rank, as no attempt is made to recognize linear dependence with approximate calculations.EXAMPLES:
Inexact Rings, Numerical Matrices:
First, the inexact rings,
CDFandRDF.sage: # needs scipy sage.rings.complex_double sage.symbolic sage: A = matrix(CDF, [[ 0.6454 + 0.7491*I, -0.8662 + 0.1489*I, 0.7656 - 0.00344*I], ....: [-0.2913 + 0.8057*I, 0.8321 + 0.8170*I, -0.6744 + 0.9248*I], ....: [ 0.2554 + 0.3517*I, -0.4454 - 0.1715*I, 0.8325 - 0.6282*I]]) sage: G, M = A.gram_schmidt() sage: G.round(6) # random signs [-0.422243 - 0.490087*I 0.566698 - 0.097416*I -0.500882 + 0.002251*I] [-0.057002 - 0.495035*I -0.35059 - 0.625323*I 0.255514 - 0.415284*I] [ 0.394105 - 0.421778*I -0.392266 - 0.039345*I -0.352905 + 0.62195*I] sage: M.round(6) # random [ -1.528503 0.0 0.0] [ 0.459974 - 0.40061*I -1.741233 0.0] [-0.934304 + 0.148868*I 0.54833 + 0.073202*I -0.550725] sage: (A - M*G).zero_at(10^-12) [0.0 0.0 0.0] [0.0 0.0 0.0] [0.0 0.0 0.0] sage: (G*G.conjugate_transpose()) # random [0.9999999999999999 0.0 0.0] [ 0.0 0.9999999999999997 0.0] [ 0.0 0.0 1.0]
>>> from sage.all import * >>> # needs scipy sage.rings.complex_double sage.symbolic >>> A = matrix(CDF, [[ RealNumber('0.6454') + RealNumber('0.7491')*I, -RealNumber('0.8662') + RealNumber('0.1489')*I, RealNumber('0.7656') - RealNumber('0.00344')*I], ... [-RealNumber('0.2913') + RealNumber('0.8057')*I, RealNumber('0.8321') + RealNumber('0.8170')*I, -RealNumber('0.6744') + RealNumber('0.9248')*I], ... [ RealNumber('0.2554') + RealNumber('0.3517')*I, -RealNumber('0.4454') - RealNumber('0.1715')*I, RealNumber('0.8325') - RealNumber('0.6282')*I]]) >>> G, M = A.gram_schmidt() >>> G.round(Integer(6)) # random signs [-0.422243 - 0.490087*I 0.566698 - 0.097416*I -0.500882 + 0.002251*I] [-0.057002 - 0.495035*I -0.35059 - 0.625323*I 0.255514 - 0.415284*I] [ 0.394105 - 0.421778*I -0.392266 - 0.039345*I -0.352905 + 0.62195*I] >>> M.round(Integer(6)) # random [ -1.528503 0.0 0.0] [ 0.459974 - 0.40061*I -1.741233 0.0] [-0.934304 + 0.148868*I 0.54833 + 0.073202*I -0.550725] >>> (A - M*G).zero_at(Integer(10)**-Integer(12)) [0.0 0.0 0.0] [0.0 0.0 0.0] [0.0 0.0 0.0] >>> (G*G.conjugate_transpose()) # random [0.9999999999999999 0.0 0.0] [ 0.0 0.9999999999999997 0.0] [ 0.0 0.0 1.0]
# needs scipy sage.rings.complex_double sage.symbolic A = matrix(CDF, [[ 0.6454 + 0.7491*I, -0.8662 + 0.1489*I, 0.7656 - 0.00344*I], [-0.2913 + 0.8057*I, 0.8321 + 0.8170*I, -0.6744 + 0.9248*I], [ 0.2554 + 0.3517*I, -0.4454 - 0.1715*I, 0.8325 - 0.6282*I]]) G, M = A.gram_schmidt() G.round(6) # random signs M.round(6) # random (A - M*G).zero_at(10^-12) (G*G.conjugate_transpose()) # randomA rectangular matrix. Note that the
orthonormalkeyword is ignored in these cases.sage: # needs scipy sage: A = matrix(RDF, [[-0.978325, -0.751994, 0.925305, -0.200512, 0.420458], ....: [-0.474877, -0.983403, 0.089836, 0.132218, 0.672965]]) sage: G, M = A.gram_schmidt(orthonormal=False) sage: G.round(6).zero_at(10^-6) [-0.607223 -0.466745 0.574315 -0.124453 0.260968] [ 0.123203 -0.617909 -0.530578 0.289773 0.487368] sage: M.round(6).zero_at(10^-6) [1.611147 0.0] [0.958116 0.867778] sage: (A - M*G).zero_at(10^-12) [0.0 0.0 0.0 0.0 0.0] [0.0 0.0 0.0 0.0 0.0] sage: (G*G.transpose()).round(6).zero_at(10^-6) [1.0 0.0] [0.0 1.0]
>>> from sage.all import * >>> # needs scipy >>> A = matrix(RDF, [[-RealNumber('0.978325'), -RealNumber('0.751994'), RealNumber('0.925305'), -RealNumber('0.200512'), RealNumber('0.420458')], ... [-RealNumber('0.474877'), -RealNumber('0.983403'), RealNumber('0.089836'), RealNumber('0.132218'), RealNumber('0.672965')]]) >>> G, M = A.gram_schmidt(orthonormal=False) >>> G.round(Integer(6)).zero_at(Integer(10)**-Integer(6)) [-0.607223 -0.466745 0.574315 -0.124453 0.260968] [ 0.123203 -0.617909 -0.530578 0.289773 0.487368] >>> M.round(Integer(6)).zero_at(Integer(10)**-Integer(6)) [1.611147 0.0] [0.958116 0.867778] >>> (A - M*G).zero_at(Integer(10)**-Integer(12)) [0.0 0.0 0.0 0.0 0.0] [0.0 0.0 0.0 0.0 0.0] >>> (G*G.transpose()).round(Integer(6)).zero_at(Integer(10)**-Integer(6)) [1.0 0.0] [0.0 1.0]
# needs scipy A = matrix(RDF, [[-0.978325, -0.751994, 0.925305, -0.200512, 0.420458], [-0.474877, -0.983403, 0.089836, 0.132218, 0.672965]]) G, M = A.gram_schmidt(orthonormal=False) G.round(6).zero_at(10^-6) M.round(6).zero_at(10^-6) (A - M*G).zero_at(10^-12) (G*G.transpose()).round(6).zero_at(10^-6)Even though a set of vectors may be linearly dependent, no effort is made to decide when a zero vector is really the result of a relation of linear dependence. So in this regard, input matrices are treated as being of full rank. Try one of the base rings that provide exact results if you need exact results.
sage: # needs scipy sage: entries = [[1,1,2], [2,1,3], [3,1,4]] sage: A = matrix(QQ, entries) sage: A.rank() 2 sage: B = matrix(RDF, entries) sage: G, M = B.gram_schmidt() sage: G.round(6) # random signs [-0.408248 -0.408248 -0.816497] [ 0.707107 -0.707107 -0.0] [ -0.57735 -0.57735 0.57735] sage: M.round(10) # random [-2.4494897428 0.0 0.0] [-3.6742346142 0.7071067812 0.0] [-4.8989794856 1.4142135624 0.0] sage: (A - M*G).zero_at(1e-14) [0.0 0.0 0.0] [0.0 0.0 0.0] [0.0 0.0 0.0] sage: (G*G.transpose()) # abs tol 1e-14 [0.9999999999999997 0.0 0.0] [ 0.0 0.9999999999999998 0.0] [ 0.0 0.0 1.0]
>>> from sage.all import * >>> # needs scipy >>> entries = [[Integer(1),Integer(1),Integer(2)], [Integer(2),Integer(1),Integer(3)], [Integer(3),Integer(1),Integer(4)]] >>> A = matrix(QQ, entries) >>> A.rank() 2 >>> B = matrix(RDF, entries) >>> G, M = B.gram_schmidt() >>> G.round(Integer(6)) # random signs [-0.408248 -0.408248 -0.816497] [ 0.707107 -0.707107 -0.0] [ -0.57735 -0.57735 0.57735] >>> M.round(Integer(10)) # random [-2.4494897428 0.0 0.0] [-3.6742346142 0.7071067812 0.0] [-4.8989794856 1.4142135624 0.0] >>> (A - M*G).zero_at(RealNumber('1e-14')) [0.0 0.0 0.0] [0.0 0.0 0.0] [0.0 0.0 0.0] >>> (G*G.transpose()) # abs tol 1e-14 [0.9999999999999997 0.0 0.0] [ 0.0 0.9999999999999998 0.0] [ 0.0 0.0 1.0]
# needs scipy entries = [[1,1,2], [2,1,3], [3,1,4]] A = matrix(QQ, entries) A.rank() B = matrix(RDF, entries) G, M = B.gram_schmidt() G.round(6) # random signs M.round(10) # random (A - M*G).zero_at(1e-14) (G*G.transpose()) # abs tol 1e-14
Exact Rings, Orthonormalization:
To scale a vector to unit length requires taking a square root, which often takes us outside the base ring. For the integers and the rationals, the field of algebraic numbers (
QQbar) is big enough to contain what we need, but the price is that the computations are very slow, hence mostly of value for small cases or instruction. Now we need to use theorthonormalkeyword.sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[6, -8, 1], ....: [4, 1, 3], ....: [6, 3, 3], ....: [7, 1, -5], ....: [7, -3, 5]]) sage: G, M = A.gram_schmidt(orthonormal=True) sage: G [ 0.5970223141259934? -0.7960297521679913? 0.09950371902099891?] [ 0.6063218341690895? 0.5289635311888953? 0.5937772444966257?] [ 0.5252981913594170? 0.2941669871612735? -0.798453250866314?] sage: M [ 10.04987562112089? 0 0] [ 1.890570661398980? 4.735582601355131? 0] [ 1.492555785314984? 7.006153332071100? 1.638930357041381?] [ 2.885607851608969? 1.804330147889395? 7.963520581008761?] [ 7.064764050490923? 5.626248468100069? -1.197679876299471?] sage: M*G - A [0 0 0] [0 0 0] [0 0 0] [0 0 0] [0 0 0] sage: (G*G.transpose() - identity_matrix(3)).norm() < 10^-10 True sage: G.row_space() == A.row_space() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[Integer(6), -Integer(8), Integer(1)], ... [Integer(4), Integer(1), Integer(3)], ... [Integer(6), Integer(3), Integer(3)], ... [Integer(7), Integer(1), -Integer(5)], ... [Integer(7), -Integer(3), Integer(5)]]) >>> G, M = A.gram_schmidt(orthonormal=True) >>> G [ 0.5970223141259934? -0.7960297521679913? 0.09950371902099891?] [ 0.6063218341690895? 0.5289635311888953? 0.5937772444966257?] [ 0.5252981913594170? 0.2941669871612735? -0.798453250866314?] >>> M [ 10.04987562112089? 0 0] [ 1.890570661398980? 4.735582601355131? 0] [ 1.492555785314984? 7.006153332071100? 1.638930357041381?] [ 2.885607851608969? 1.804330147889395? 7.963520581008761?] [ 7.064764050490923? 5.626248468100069? -1.197679876299471?] >>> M*G - A [0 0 0] [0 0 0] [0 0 0] [0 0 0] [0 0 0] >>> (G*G.transpose() - identity_matrix(Integer(3))).norm() < Integer(10)**-Integer(10) True >>> G.row_space() == A.row_space() True
# needs sage.rings.number_field A = matrix(QQbar, [[6, -8, 1], [4, 1, 3], [6, 3, 3], [7, 1, -5], [7, -3, 5]]) G, M = A.gram_schmidt(orthonormal=True) G M M*G - A (G*G.transpose() - identity_matrix(3)).norm() < 10^-10 G.row_space() == A.row_space()After Issue #14047, the matrix can also be over the algebraic reals
AA:sage: # needs sage.rings.number_field sage: A = matrix(AA, [[6, -8, 1], ....: [4, 1, 3], ....: [6, 3, 3], ....: [7, 1, -5], ....: [7, -3, 5]]) sage: G, M = A.gram_schmidt(orthonormal=True) sage: G [ 0.5970223141259934? -0.7960297521679913? 0.09950371902099891?] [ 0.6063218341690895? 0.5289635311888953? 0.5937772444966257?] [ 0.5252981913594170? 0.2941669871612735? -0.798453250866314?] sage: M [ 10.04987562112089? 0 0] [ 1.890570661398980? 4.735582601355131? 0] [ 1.492555785314984? 7.006153332071100? 1.638930357041381?] [ 2.885607851608969? 1.804330147889395? 7.963520581008761?] [ 7.064764050490923? 5.626248468100069? -1.197679876299471?]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(AA, [[Integer(6), -Integer(8), Integer(1)], ... [Integer(4), Integer(1), Integer(3)], ... [Integer(6), Integer(3), Integer(3)], ... [Integer(7), Integer(1), -Integer(5)], ... [Integer(7), -Integer(3), Integer(5)]]) >>> G, M = A.gram_schmidt(orthonormal=True) >>> G [ 0.5970223141259934? -0.7960297521679913? 0.09950371902099891?] [ 0.6063218341690895? 0.5289635311888953? 0.5937772444966257?] [ 0.5252981913594170? 0.2941669871612735? -0.798453250866314?] >>> M [ 10.04987562112089? 0 0] [ 1.890570661398980? 4.735582601355131? 0] [ 1.492555785314984? 7.006153332071100? 1.638930357041381?] [ 2.885607851608969? 1.804330147889395? 7.963520581008761?] [ 7.064764050490923? 5.626248468100069? -1.197679876299471?]
# needs sage.rings.number_field A = matrix(AA, [[6, -8, 1], [4, 1, 3], [6, 3, 3], [7, 1, -5], [7, -3, 5]]) G, M = A.gram_schmidt(orthonormal=True) G MStarting with complex numbers with rational real and imaginary parts. Note the use of the conjugate-transpose when checking the orthonormality.
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[ -2, -I - 1, 4*I + 2, -1], ....: [-4*I, -2*I + 17, 0, 9*I + 1], ....: [ 1, -2*I - 6, -I + 11, -5*I + 1]]) sage: G, M = A.gram_schmidt(orthonormal=True) sage: (M*G - A).norm() < 10^-10 True sage: id3 = G*G.conjugate().transpose() sage: (id3 - identity_matrix(3)).norm() < 10^-10 True sage: G.row_space() == A.row_space() # long time True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[ -Integer(2), -I - Integer(1), Integer(4)*I + Integer(2), -Integer(1)], ... [-Integer(4)*I, -Integer(2)*I + Integer(17), Integer(0), Integer(9)*I + Integer(1)], ... [ Integer(1), -Integer(2)*I - Integer(6), -I + Integer(11), -Integer(5)*I + Integer(1)]]) >>> G, M = A.gram_schmidt(orthonormal=True) >>> (M*G - A).norm() < Integer(10)**-Integer(10) True >>> id3 = G*G.conjugate().transpose() >>> (id3 - identity_matrix(Integer(3))).norm() < Integer(10)**-Integer(10) True >>> G.row_space() == A.row_space() # long time True
# needs sage.rings.number_field A = matrix(QQbar, [[ -2, -I - 1, 4*I + 2, -1], [-4*I, -2*I + 17, 0, 9*I + 1], [ 1, -2*I - 6, -I + 11, -5*I + 1]]) G, M = A.gram_schmidt(orthonormal=True) (M*G - A).norm() < 10^-10 id3 = G*G.conjugate().transpose() (id3 - identity_matrix(3)).norm() < 10^-10 G.row_space() == A.row_space() # long timeA square matrix with small rank. The zero vectors produced as a result of linear dependence get eliminated, so the rows of
Gare a basis for the row space ofA.sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[2, -6, 3, 8], ....: [1, -3, 2, 5], ....: [0, 0, 2, 4], ....: [2, -6, 3, 8]]) sage: A.change_ring(QQ).rank() 2 sage: G, M = A.gram_schmidt(orthonormal=True) sage: G [ 0.1881441736767195? -0.5644325210301583? 0.2822162605150792? 0.7525766947068779?] [-0.2502818123591464? 0.750845437077439? 0.3688363550555841? 0.4873908977520218?] sage: M [10.630145812734649? 0] [ 6.208757731331742? 0.6718090752798139?] [ 3.574739299857670? 2.687236301119256?] [10.630145812734649? 0] sage: M*G - A [0 0 0 0] [0 0 0 0] [0 0 0 0] [0 0 0 0] sage: (G*G.transpose() - identity_matrix(2)).norm() < 10^-10 True sage: G.row_space() == A.row_space() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[Integer(2), -Integer(6), Integer(3), Integer(8)], ... [Integer(1), -Integer(3), Integer(2), Integer(5)], ... [Integer(0), Integer(0), Integer(2), Integer(4)], ... [Integer(2), -Integer(6), Integer(3), Integer(8)]]) >>> A.change_ring(QQ).rank() 2 >>> G, M = A.gram_schmidt(orthonormal=True) >>> G [ 0.1881441736767195? -0.5644325210301583? 0.2822162605150792? 0.7525766947068779?] [-0.2502818123591464? 0.750845437077439? 0.3688363550555841? 0.4873908977520218?] >>> M [10.630145812734649? 0] [ 6.208757731331742? 0.6718090752798139?] [ 3.574739299857670? 2.687236301119256?] [10.630145812734649? 0] >>> M*G - A [0 0 0 0] [0 0 0 0] [0 0 0 0] [0 0 0 0] >>> (G*G.transpose() - identity_matrix(Integer(2))).norm() < Integer(10)**-Integer(10) True >>> G.row_space() == A.row_space() True
# needs sage.rings.number_field A = matrix(QQbar, [[2, -6, 3, 8], [1, -3, 2, 5], [0, 0, 2, 4], [2, -6, 3, 8]]) A.change_ring(QQ).rank() G, M = A.gram_schmidt(orthonormal=True) G M M*G - A (G*G.transpose() - identity_matrix(2)).norm() < 10^-10 G.row_space() == A.row_space()Exact Rings, Orthogonalization:
If we forego scaling orthogonal vectors to unit vectors, we can apply Gram-Schmidt to a much greater variety of rings. Use the
orthonormal=Falsekeyword (or assume it as the default). Note that now the orthogonality check creates a diagonal matrix whose diagonal entries are the squares of the lengths of the vectors.First, in the rationals, without involving
QQbar.sage: A = matrix(QQ, [[-1, 3, 2, 2], ....: [-1, 0, -1, 0], ....: [-1, -2, -3, -1], ....: [ 1, 1, 2, 0]]) sage: A.rank() 3 sage: G, M = A.gram_schmidt() sage: G [ -1 3 2 2] [-19/18 1/6 -8/9 1/9] [ 2/35 -4/35 -2/35 9/35] sage: M [ 1 0 0] [ -1/18 1 0] [-13/18 59/35 1] [ 1/3 -48/35 -2] sage: M*G-A [0 0 0 0] [0 0 0 0] [0 0 0 0] [0 0 0 0] sage: G*G.transpose() [ 18 0 0] [ 0 35/18 0] [ 0 0 3/35] sage: G.row_space() == A.row_space() True
>>> from sage.all import * >>> A = matrix(QQ, [[-Integer(1), Integer(3), Integer(2), Integer(2)], ... [-Integer(1), Integer(0), -Integer(1), Integer(0)], ... [-Integer(1), -Integer(2), -Integer(3), -Integer(1)], ... [ Integer(1), Integer(1), Integer(2), Integer(0)]]) >>> A.rank() 3 >>> G, M = A.gram_schmidt() >>> G [ -1 3 2 2] [-19/18 1/6 -8/9 1/9] [ 2/35 -4/35 -2/35 9/35] >>> M [ 1 0 0] [ -1/18 1 0] [-13/18 59/35 1] [ 1/3 -48/35 -2] >>> M*G-A [0 0 0 0] [0 0 0 0] [0 0 0 0] [0 0 0 0] >>> G*G.transpose() [ 18 0 0] [ 0 35/18 0] [ 0 0 3/35] >>> G.row_space() == A.row_space() True
A = matrix(QQ, [[-1, 3, 2, 2], [-1, 0, -1, 0], [-1, -2, -3, -1], [ 1, 1, 2, 0]]) A.rank() G, M = A.gram_schmidt() G M M*G-A G*G.transpose() G.row_space() == A.row_space()A complex subfield of the complex numbers.
sage: # needs sage.rings.number_field sage: C.<z> = CyclotomicField(5) sage: A = matrix(C, ....: [[ -z^3 - 2*z, -z^3 - 1, 2*z^3 - 2*z^2 + 2*z, 1], ....: [ z^3 - 2*z^2 + 1, -z^3 + 2*z^2 - z - 1, -1, z^2 + z], ....: [-1/2*z^3 - 2*z^2 + z + 1, -z^3 + z - 2, -2*z^3 + 1/2*z^2, 2*z^2 - z + 2]]) sage: G, M = A.gram_schmidt(orthonormal=False) sage: G [ -z^3 - 2*z -z^3 - 1 2*z^3 - 2*z^2 + 2*z 1] [ 155/139*z^3 - 161/139*z^2 + 31/139*z + 13/139 -175/139*z^3 + 180/139*z^2 - 125/139*z - 142/139 230/139*z^3 + 124/139*z^2 + 6/139*z + 19/139 -14/139*z^3 + 92/139*z^2 - 6/139*z - 95/139] [-10359/19841*z^3 - 36739/39682*z^2 + 24961/39682*z - 11879/39682 -28209/39682*z^3 - 3671/19841*z^2 + 51549/39682*z - 38613/39682 -42769/39682*z^3 - 615/39682*z^2 - 1252/19841*z - 14392/19841 4895/19841*z^3 + 57885/39682*z^2 - 46094/19841*z + 65747/39682] sage: M [ 1 0 0] [ 14/139*z^3 + 47/139*z^2 + 145/139*z + 95/139 1 0] [ -7/278*z^3 + 199/278*z^2 + 183/139*z + 175/278 -3785/39682*z^3 + 3346/19841*z^2 - 3990/19841*z + 2039/19841 1] sage: M*G - A [0 0 0 0] [0 0 0 0] [0 0 0 0] sage: G*G.conjugate().transpose() [ 15*z^3 + 15*z^2 + 28 0 0] [ 0 463/139*z^3 + 463/139*z^2 + 1971/139 0] [ 0 0 230983/19841*z^3 + 230983/19841*z^2 + 1003433/39682] sage: G.row_space() == A.row_space() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> C = CyclotomicField(Integer(5), names=('z',)); (z,) = C._first_ngens(1) >>> A = matrix(C, ... [[ -z**Integer(3) - Integer(2)*z, -z**Integer(3) - Integer(1), Integer(2)*z**Integer(3) - Integer(2)*z**Integer(2) + Integer(2)*z, Integer(1)], ... [ z**Integer(3) - Integer(2)*z**Integer(2) + Integer(1), -z**Integer(3) + Integer(2)*z**Integer(2) - z - Integer(1), -Integer(1), z**Integer(2) + z], ... [-Integer(1)/Integer(2)*z**Integer(3) - Integer(2)*z**Integer(2) + z + Integer(1), -z**Integer(3) + z - Integer(2), -Integer(2)*z**Integer(3) + Integer(1)/Integer(2)*z**Integer(2), Integer(2)*z**Integer(2) - z + Integer(2)]]) >>> G, M = A.gram_schmidt(orthonormal=False) >>> G [ -z^3 - 2*z -z^3 - 1 2*z^3 - 2*z^2 + 2*z 1] [ 155/139*z^3 - 161/139*z^2 + 31/139*z + 13/139 -175/139*z^3 + 180/139*z^2 - 125/139*z - 142/139 230/139*z^3 + 124/139*z^2 + 6/139*z + 19/139 -14/139*z^3 + 92/139*z^2 - 6/139*z - 95/139] [-10359/19841*z^3 - 36739/39682*z^2 + 24961/39682*z - 11879/39682 -28209/39682*z^3 - 3671/19841*z^2 + 51549/39682*z - 38613/39682 -42769/39682*z^3 - 615/39682*z^2 - 1252/19841*z - 14392/19841 4895/19841*z^3 + 57885/39682*z^2 - 46094/19841*z + 65747/39682] >>> M [ 1 0 0] [ 14/139*z^3 + 47/139*z^2 + 145/139*z + 95/139 1 0] [ -7/278*z^3 + 199/278*z^2 + 183/139*z + 175/278 -3785/39682*z^3 + 3346/19841*z^2 - 3990/19841*z + 2039/19841 1] >>> M*G - A [0 0 0 0] [0 0 0 0] [0 0 0 0] >>> G*G.conjugate().transpose() [ 15*z^3 + 15*z^2 + 28 0 0] [ 0 463/139*z^3 + 463/139*z^2 + 1971/139 0] [ 0 0 230983/19841*z^3 + 230983/19841*z^2 + 1003433/39682] >>> G.row_space() == A.row_space() True
# needs sage.rings.number_field C.<z> = CyclotomicField(5) A = matrix(C, [[ -z^3 - 2*z, -z^3 - 1, 2*z^3 - 2*z^2 + 2*z, 1], [ z^3 - 2*z^2 + 1, -z^3 + 2*z^2 - z - 1, -1, z^2 + z], [-1/2*z^3 - 2*z^2 + z + 1, -z^3 + z - 2, -2*z^3 + 1/2*z^2, 2*z^2 - z + 2]]) G, M = A.gram_schmidt(orthonormal=False) G M M*G - A G*G.conjugate().transpose() G.row_space() == A.row_space()A slightly edited legacy example.
sage: A = matrix(ZZ, 3, [-1, 2, 5, -11, 1, 1, 1, -1, -3]); A [ -1 2 5] [-11 1 1] [ 1 -1 -3] sage: G, mu = A.gram_schmidt() sage: G [ -1 2 5] [ -52/5 -1/5 -2] [ 2/187 36/187 -14/187] sage: mu [ 1 0 0] [ 3/5 1 0] [ -3/5 -7/187 1] sage: G.row(0) * G.row(1) 0 sage: G.row(0) * G.row(2) 0 sage: G.row(1) * G.row(2) 0
>>> from sage.all import * >>> A = matrix(ZZ, Integer(3), [-Integer(1), Integer(2), Integer(5), -Integer(11), Integer(1), Integer(1), Integer(1), -Integer(1), -Integer(3)]); A [ -1 2 5] [-11 1 1] [ 1 -1 -3] >>> G, mu = A.gram_schmidt() >>> G [ -1 2 5] [ -52/5 -1/5 -2] [ 2/187 36/187 -14/187] >>> mu [ 1 0 0] [ 3/5 1 0] [ -3/5 -7/187 1] >>> G.row(Integer(0)) * G.row(Integer(1)) 0 >>> G.row(Integer(0)) * G.row(Integer(2)) 0 >>> G.row(Integer(1)) * G.row(Integer(2)) 0
A = matrix(ZZ, 3, [-1, 2, 5, -11, 1, 1, 1, -1, -3]); A G, mu = A.gram_schmidt() G mu G.row(0) * G.row(1) G.row(0) * G.row(2) G.row(1) * G.row(2)
The relation between mu and A is as follows.
sage: mu*G == A True
>>> from sage.all import * >>> mu*G == A True
mu*G == A
- hadamard_bound()[source]¶
Return an int n such that the absolute value of the determinant of this matrix is at most \(10^n\).
This is got using both the row norms and the column norms.
This function only makes sense when the base field can be coerced to the real double field RDF or the MPFR Real Field with 53-bits precision.
EXAMPLES:
sage: a = matrix(ZZ, 3, [1,2,5,7,-3,4,2,1,123]) sage: a.hadamard_bound() 4 sage: a.det() -2014 sage: 10^4 10000
>>> from sage.all import * >>> a = matrix(ZZ, Integer(3), [Integer(1),Integer(2),Integer(5),Integer(7),-Integer(3),Integer(4),Integer(2),Integer(1),Integer(123)]) >>> a.hadamard_bound() 4 >>> a.det() -2014 >>> Integer(10)**Integer(4) 10000
a = matrix(ZZ, 3, [1,2,5,7,-3,4,2,1,123]) a.hadamard_bound() a.det() 10^4
In this example the Hadamard bound has to be computed (automatically) using MPFR instead of doubles, since doubles overflow:
sage: a = matrix(ZZ, 2, [2^10000, 3^10000, 2^50, 3^19292]) sage: a.hadamard_bound() 12215 sage: len(str(a.det())) 12215
>>> from sage.all import * >>> a = matrix(ZZ, Integer(2), [Integer(2)**Integer(10000), Integer(3)**Integer(10000), Integer(2)**Integer(50), Integer(3)**Integer(19292)]) >>> a.hadamard_bound() 12215 >>> len(str(a.det())) 12215
a = matrix(ZZ, 2, [2^10000, 3^10000, 2^50, 3^19292]) a.hadamard_bound() len(str(a.det()))
- hermite_form(include_zero_rows=True, transformation=False)[source]¶
Return the Hermite form of self, if it is defined.
INPUT:
include_zero_rows– boolean (default:True); ifFalsethe zero rows in the output matrix are deletedtransformation– boolean (default:False); a matrix \(U\) such thatU*self == H
OUTPUT:
matrix H
(optional) transformation matrix \(U\) such that
U*self == H, possibly with zero rows deleted
EXAMPLES:
sage: M = FunctionField(GF(7), 'x').maximal_order() sage: K.<x> = FunctionField(GF(7)); M = K.maximal_order() sage: A = matrix(M, 2, 3, [x, 1, 2*x, x, 1 + x, 2]) sage: A.hermite_form() [ x 1 2*x] [ 0 x 5*x + 2] sage: A.hermite_form(transformation=True) ( [ x 1 2*x] [1 0] [ 0 x 5*x + 2], [6 1] ) sage: A = matrix(M, 2, 3, [x, 1, 2*x, 2*x, 2, 4*x]) sage: A.hermite_form(transformation=True, include_zero_rows=False) ([ x 1 2*x], [1 0]) sage: H, U = A.hermite_form(transformation=True, include_zero_rows=True) sage: H, U ( [ x 1 2*x] [1 0] [ 0 0 0], [5 1] ) sage: U * A == H True sage: H, U = A.hermite_form(transformation=True, include_zero_rows=False) sage: U * A [ x 1 2*x] sage: U * A == H True
>>> from sage.all import * >>> M = FunctionField(GF(Integer(7)), 'x').maximal_order() >>> K = FunctionField(GF(Integer(7)), names=('x',)); (x,) = K._first_ngens(1); M = K.maximal_order() >>> A = matrix(M, Integer(2), Integer(3), [x, Integer(1), Integer(2)*x, x, Integer(1) + x, Integer(2)]) >>> A.hermite_form() [ x 1 2*x] [ 0 x 5*x + 2] >>> A.hermite_form(transformation=True) ( [ x 1 2*x] [1 0] [ 0 x 5*x + 2], [6 1] ) >>> A = matrix(M, Integer(2), Integer(3), [x, Integer(1), Integer(2)*x, Integer(2)*x, Integer(2), Integer(4)*x]) >>> A.hermite_form(transformation=True, include_zero_rows=False) ([ x 1 2*x], [1 0]) >>> H, U = A.hermite_form(transformation=True, include_zero_rows=True) >>> H, U ( [ x 1 2*x] [1 0] [ 0 0 0], [5 1] ) >>> U * A == H True >>> H, U = A.hermite_form(transformation=True, include_zero_rows=False) >>> U * A [ x 1 2*x] >>> U * A == H True
M = FunctionField(GF(7), 'x').maximal_order() K.<x> = FunctionField(GF(7)); M = K.maximal_order() A = matrix(M, 2, 3, [x, 1, 2*x, x, 1 + x, 2]) A.hermite_form() A.hermite_form(transformation=True) A = matrix(M, 2, 3, [x, 1, 2*x, 2*x, 2, 4*x]) A.hermite_form(transformation=True, include_zero_rows=False) H, U = A.hermite_form(transformation=True, include_zero_rows=True) H, U U * A == H H, U = A.hermite_form(transformation=True, include_zero_rows=False) U * A U * A == H
- hessenberg_form()[source]¶
Return Hessenberg form of
self.If the base ring is merely an integral domain (and not a field), the Hessenberg form will (in general) only be defined over the fraction field of the base ring.
EXAMPLES:
sage: A = matrix(ZZ, 4, [2, 1, 1, -2, 2, 2, -1, -1, -1,1,2,3,4,5,6,7]) sage: h = A.hessenberg_form(); h [ 2 -7/2 -19/5 -2] [ 2 1/2 -17/5 -1] [ 0 25/4 15/2 5/2] [ 0 0 58/5 3] sage: parent(h) Full MatrixSpace of 4 by 4 dense matrices over Rational Field sage: A.hessenbergize() Traceback (most recent call last): ... TypeError: Hessenbergize only possible for matrices over a field
>>> from sage.all import * >>> A = matrix(ZZ, Integer(4), [Integer(2), Integer(1), Integer(1), -Integer(2), Integer(2), Integer(2), -Integer(1), -Integer(1), -Integer(1),Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6),Integer(7)]) >>> h = A.hessenberg_form(); h [ 2 -7/2 -19/5 -2] [ 2 1/2 -17/5 -1] [ 0 25/4 15/2 5/2] [ 0 0 58/5 3] >>> parent(h) Full MatrixSpace of 4 by 4 dense matrices over Rational Field >>> A.hessenbergize() Traceback (most recent call last): ... TypeError: Hessenbergize only possible for matrices over a field
A = matrix(ZZ, 4, [2, 1, 1, -2, 2, 2, -1, -1, -1,1,2,3,4,5,6,7]) h = A.hessenberg_form(); h parent(h) A.hessenbergize()
- hessenbergize()[source]¶
Transform
selfto Hessenberg form.The hessenberg form of a matrix \(A\) is a matrix that is similar to \(A\), so has the same characteristic polynomial as \(A\), and is upper triangular except possible for entries right below the diagonal.
ALGORITHM: See Henri Cohen’s first book.
EXAMPLES:
sage: A = matrix(QQ, 3, [2, 1, 1, -2, 2, 2, -1, -1, -1]) sage: A.hessenbergize(); A [ 2 3/2 1] [ -2 3 2] [ 0 -3 -2]
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), [Integer(2), Integer(1), Integer(1), -Integer(2), Integer(2), Integer(2), -Integer(1), -Integer(1), -Integer(1)]) >>> A.hessenbergize(); A [ 2 3/2 1] [ -2 3 2] [ 0 -3 -2]
A = matrix(QQ, 3, [2, 1, 1, -2, 2, 2, -1, -1, -1]) A.hessenbergize(); A
sage: A = matrix(QQ, 4, [2, 1, 1, -2, 2, 2, -1, -1, -1,1,2,3,4,5,6,7]) sage: A.hessenbergize(); A [ 2 -7/2 -19/5 -2] [ 2 1/2 -17/5 -1] [ 0 25/4 15/2 5/2] [ 0 0 58/5 3]
>>> from sage.all import * >>> A = matrix(QQ, Integer(4), [Integer(2), Integer(1), Integer(1), -Integer(2), Integer(2), Integer(2), -Integer(1), -Integer(1), -Integer(1),Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6),Integer(7)]) >>> A.hessenbergize(); A [ 2 -7/2 -19/5 -2] [ 2 1/2 -17/5 -1] [ 0 25/4 15/2 5/2] [ 0 0 58/5 3]
A = matrix(QQ, 4, [2, 1, 1, -2, 2, 2, -1, -1, -1,1,2,3,4,5,6,7]) A.hessenbergize(); A
>>> from sage.all import * >>> A = matrix(QQ, Integer(4), [Integer(2), Integer(1), Integer(1), -Integer(2), Integer(2), Integer(2), -Integer(1), -Integer(1), -Integer(1),Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6),Integer(7)]) >>> A.hessenbergize(); A [ 2 -7/2 -19/5 -2] [ 2 1/2 -17/5 -1] [ 0 25/4 15/2 5/2] [ 0 0 58/5 3]
A = matrix(QQ, 4, [2, 1, 1, -2, 2, 2, -1, -1, -1,1,2,3,4,5,6,7]) A.hessenbergize(); A
You can’t Hessenbergize an immutable matrix:
sage: A = matrix(QQ, 3, [1..9]) sage: A.set_immutable() sage: A.hessenbergize() Traceback (most recent call last): ... ValueError: matrix is immutable; please change a copy instead (i.e., use copy(M) to change a copy of M).
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), (ellipsis_range(Integer(1),Ellipsis,Integer(9)))) >>> A.set_immutable() >>> A.hessenbergize() Traceback (most recent call last): ... ValueError: matrix is immutable; please change a copy instead (i.e., use copy(M) to change a copy of M).
A = matrix(QQ, 3, [1..9]) A.set_immutable() A.hessenbergize()
- image()[source]¶
Return the image of the homomorphism on rows defined by right multiplication by this matrix: that is, the row-space.
EXAMPLES:
sage: MS1 = MatrixSpace(ZZ, 4) sage: MS2 = MatrixSpace(QQ, 6) sage: A = MS1.matrix([3,4,5,6, 7,3,8,10, 14,5,6,7, 2,2,10,9]) sage: B = MS2.random_element()
>>> from sage.all import * >>> MS1 = MatrixSpace(ZZ, Integer(4)) >>> MS2 = MatrixSpace(QQ, Integer(6)) >>> A = MS1.matrix([Integer(3),Integer(4),Integer(5),Integer(6), Integer(7),Integer(3),Integer(8),Integer(10), Integer(14),Integer(5),Integer(6),Integer(7), Integer(2),Integer(2),Integer(10),Integer(9)]) >>> B = MS2.random_element()
MS1 = MatrixSpace(ZZ, 4) MS2 = MatrixSpace(QQ, 6) A = MS1.matrix([3,4,5,6, 7,3,8,10, 14,5,6,7, 2,2,10,9]) B = MS2.random_element()
sage: image(A) Free module of degree 4 and rank 4 over Integer Ring Echelon basis matrix: [ 1 0 0 426] [ 0 1 0 518] [ 0 0 1 293] [ 0 0 0 687]
>>> from sage.all import * >>> image(A) Free module of degree 4 and rank 4 over Integer Ring Echelon basis matrix: [ 1 0 0 426] [ 0 1 0 518] [ 0 0 1 293] [ 0 0 0 687]
image(A)
>>> from sage.all import * >>> image(A) Free module of degree 4 and rank 4 over Integer Ring Echelon basis matrix: [ 1 0 0 426] [ 0 1 0 518] [ 0 0 1 293] [ 0 0 0 687]
image(A)
sage: image(B) == B.row_module() True sage: image(B) == B.transpose().column_module() True
>>> from sage.all import * >>> image(B) == B.row_module() True >>> image(B) == B.transpose().column_module() True
image(B) == B.row_module() image(B) == B.transpose().column_module()
>>> from sage.all import * >>> image(B) == B.row_module() True >>> image(B) == B.transpose().column_module() True
image(B) == B.row_module() image(B) == B.transpose().column_module()
See also
- indefinite_factorization(algorithm='symmetric', check=True)[source]¶
Decomposes a symmetric or Hermitian matrix into a lower triangular matrix and a diagonal matrix.
INPUT:
self– a square matrix over a ring; the base ring must have an implemented fraction fieldalgorithm– (default:'symmetric') either'symmetric'or'hermitian', according to whether the input matrix is symmetric or hermitiancheck– (default:True) ifTruethen performs the check that the matrix is consistent with thealgorithmkeyword
OUTPUT:
A lower triangular matrix \(L\) with each diagonal element equal to \(1\) and a vector of entries that form a diagonal matrix \(D\). The vector of diagonal entries can be easily used to form the matrix, as demonstrated below in the examples.
For a symmetric matrix, \(A\), these will be related by
\[A = LDL^T\]If \(A\) is Hermitian matrix, then the transpose of \(L\) should be replaced by the conjugate-transpose of \(L\).
If any leading principal submatrix (a square submatrix in the upper-left corner) is singular then this method will fail with a
ValueError.ALGORITHM:
The algorithm employed only uses field operations, but the computation of each diagonal entry has the potential for division by zero. The number of operations is of order \(n^3/3\), which is half the count for an LU decomposition. This makes it an appropriate candidate for solving systems with symmetric (or Hermitian) coefficient matrices.
See also
EXAMPLES:
There is no requirement that a matrix be positive definite, as indicated by the negative entries in the resulting diagonal matrix. The default is that the input matrix is symmetric.
sage: A = matrix(QQ, [[ 3, -6, 9, 6, -9], ....: [-6, 11, -16, -11, 17], ....: [ 9, -16, 28, 16, -40], ....: [ 6, -11, 16, 9, -19], ....: [-9, 17, -40, -19, 68]]) sage: A.is_symmetric() True sage: L, d = A.indefinite_factorization() sage: D = diagonal_matrix(d) sage: L [ 1 0 0 0 0] [-2 1 0 0 0] [ 3 -2 1 0 0] [ 2 -1 0 1 0] [-3 1 -3 1 1] sage: D [ 3 0 0 0 0] [ 0 -1 0 0 0] [ 0 0 5 0 0] [ 0 0 0 -2 0] [ 0 0 0 0 -1] sage: A == L*D*L.transpose() True
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(3), -Integer(6), Integer(9), Integer(6), -Integer(9)], ... [-Integer(6), Integer(11), -Integer(16), -Integer(11), Integer(17)], ... [ Integer(9), -Integer(16), Integer(28), Integer(16), -Integer(40)], ... [ Integer(6), -Integer(11), Integer(16), Integer(9), -Integer(19)], ... [-Integer(9), Integer(17), -Integer(40), -Integer(19), Integer(68)]]) >>> A.is_symmetric() True >>> L, d = A.indefinite_factorization() >>> D = diagonal_matrix(d) >>> L [ 1 0 0 0 0] [-2 1 0 0 0] [ 3 -2 1 0 0] [ 2 -1 0 1 0] [-3 1 -3 1 1] >>> D [ 3 0 0 0 0] [ 0 -1 0 0 0] [ 0 0 5 0 0] [ 0 0 0 -2 0] [ 0 0 0 0 -1] >>> A == L*D*L.transpose() True
A = matrix(QQ, [[ 3, -6, 9, 6, -9], [-6, 11, -16, -11, 17], [ 9, -16, 28, 16, -40], [ 6, -11, 16, 9, -19], [-9, 17, -40, -19, 68]]) A.is_symmetric() L, d = A.indefinite_factorization() D = diagonal_matrix(d) L D A == L*D*L.transpose()Optionally, Hermitian matrices can be factored and the result has a similar property (but not identical). Here, the field is all complex numbers with rational real and imaginary parts. As theory predicts, the diagonal entries will be real numbers.
sage: # needs sage.rings.number_field sage: C.<I> = QuadraticField(-1) sage: B = matrix(C, [[ 2, 4 - 2*I, 2 + 2*I], ....: [4 + 2*I, 8, 10*I], ....: [2 - 2*I, -10*I, -3]]) sage: B.is_hermitian() True sage: L, d = B.indefinite_factorization(algorithm='hermitian') sage: D = diagonal_matrix(d) sage: L [ 1 0 0] [ I + 2 1 0] [ -I + 1 2*I + 1 1] sage: D [ 2 0 0] [ 0 -2 0] [ 0 0 3] sage: B == L*D*L.conjugate_transpose() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> C = QuadraticField(-Integer(1), names=('I',)); (I,) = C._first_ngens(1) >>> B = matrix(C, [[ Integer(2), Integer(4) - Integer(2)*I, Integer(2) + Integer(2)*I], ... [Integer(4) + Integer(2)*I, Integer(8), Integer(10)*I], ... [Integer(2) - Integer(2)*I, -Integer(10)*I, -Integer(3)]]) >>> B.is_hermitian() True >>> L, d = B.indefinite_factorization(algorithm='hermitian') >>> D = diagonal_matrix(d) >>> L [ 1 0 0] [ I + 2 1 0] [ -I + 1 2*I + 1 1] >>> D [ 2 0 0] [ 0 -2 0] [ 0 0 3] >>> B == L*D*L.conjugate_transpose() True
# needs sage.rings.number_field C.<I> = QuadraticField(-1) B = matrix(C, [[ 2, 4 - 2*I, 2 + 2*I], [4 + 2*I, 8, 10*I], [2 - 2*I, -10*I, -3]]) B.is_hermitian() L, d = B.indefinite_factorization(algorithm='hermitian') D = diagonal_matrix(d) L D B == L*D*L.conjugate_transpose()If a leading principal submatrix has zero determinant, this algorithm will fail. This will never happen with a positive definite matrix.
sage: A = matrix(QQ, [[21, 15, 12, -2], ....: [15, 12, 9, 6], ....: [12, 9, 7, 3], ....: [-2, 6, 3, 8]]) sage: A.is_symmetric() True sage: A[0:3,0:3].det() == 0 True sage: A.indefinite_factorization() Traceback (most recent call last): ... ValueError: 3x3 leading principal submatrix is singular, so cannot create indefinite factorization
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(21), Integer(15), Integer(12), -Integer(2)], ... [Integer(15), Integer(12), Integer(9), Integer(6)], ... [Integer(12), Integer(9), Integer(7), Integer(3)], ... [-Integer(2), Integer(6), Integer(3), Integer(8)]]) >>> A.is_symmetric() True >>> A[Integer(0):Integer(3),Integer(0):Integer(3)].det() == Integer(0) True >>> A.indefinite_factorization() Traceback (most recent call last): ... ValueError: 3x3 leading principal submatrix is singular, so cannot create indefinite factorization
A = matrix(QQ, [[21, 15, 12, -2], [15, 12, 9, 6], [12, 9, 7, 3], [-2, 6, 3, 8]]) A.is_symmetric() A[0:3,0:3].det() == 0 A.indefinite_factorization()This algorithm only depends on field operations, so outside of the singular submatrix situation, any matrix may be factored. This provides a reasonable alternative to the Cholesky decomposition.
sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(5^3) sage: A = matrix(F, ....: [[ a^2 + 2*a, 4*a^2 + 3*a + 4, 3*a^2 + a, 2*a^2 + 2*a + 1], ....: [4*a^2 + 3*a + 4, 4*a^2 + 2, 3*a, 2*a^2 + 4*a + 2], ....: [ 3*a^2 + a, 3*a, 3*a^2 + 2, 3*a^2 + 2*a + 3], ....: [2*a^2 + 2*a + 1, 2*a^2 + 4*a + 2, 3*a^2 + 2*a + 3, 3*a^2 + 2*a + 4]]) sage: A.is_symmetric() True sage: L, d = A.indefinite_factorization() sage: D = diagonal_matrix(d) sage: L [ 1 0 0 0] [4*a^2 + 4*a + 3 1 0 0] [ 3 4*a^2 + a + 2 1 0] [ 4*a^2 + 4 2*a^2 + 3*a + 3 2*a^2 + 3*a + 1 1] sage: D [ a^2 + 2*a 0 0 0] [ 0 2*a^2 + 2*a + 4 0 0] [ 0 0 3*a^2 + 4*a + 3 0] [ 0 0 0 a^2 + 3*a] sage: A == L*D*L.transpose() True
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(5)**Integer(3), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, ... [[ a**Integer(2) + Integer(2)*a, Integer(4)*a**Integer(2) + Integer(3)*a + Integer(4), Integer(3)*a**Integer(2) + a, Integer(2)*a**Integer(2) + Integer(2)*a + Integer(1)], ... [Integer(4)*a**Integer(2) + Integer(3)*a + Integer(4), Integer(4)*a**Integer(2) + Integer(2), Integer(3)*a, Integer(2)*a**Integer(2) + Integer(4)*a + Integer(2)], ... [ Integer(3)*a**Integer(2) + a, Integer(3)*a, Integer(3)*a**Integer(2) + Integer(2), Integer(3)*a**Integer(2) + Integer(2)*a + Integer(3)], ... [Integer(2)*a**Integer(2) + Integer(2)*a + Integer(1), Integer(2)*a**Integer(2) + Integer(4)*a + Integer(2), Integer(3)*a**Integer(2) + Integer(2)*a + Integer(3), Integer(3)*a**Integer(2) + Integer(2)*a + Integer(4)]]) >>> A.is_symmetric() True >>> L, d = A.indefinite_factorization() >>> D = diagonal_matrix(d) >>> L [ 1 0 0 0] [4*a^2 + 4*a + 3 1 0 0] [ 3 4*a^2 + a + 2 1 0] [ 4*a^2 + 4 2*a^2 + 3*a + 3 2*a^2 + 3*a + 1 1] >>> D [ a^2 + 2*a 0 0 0] [ 0 2*a^2 + 2*a + 4 0 0] [ 0 0 3*a^2 + 4*a + 3 0] [ 0 0 0 a^2 + 3*a] >>> A == L*D*L.transpose() True
# needs sage.rings.finite_rings F.<a> = FiniteField(5^3) A = matrix(F, [[ a^2 + 2*a, 4*a^2 + 3*a + 4, 3*a^2 + a, 2*a^2 + 2*a + 1], [4*a^2 + 3*a + 4, 4*a^2 + 2, 3*a, 2*a^2 + 4*a + 2], [ 3*a^2 + a, 3*a, 3*a^2 + 2, 3*a^2 + 2*a + 3], [2*a^2 + 2*a + 1, 2*a^2 + 4*a + 2, 3*a^2 + 2*a + 3, 3*a^2 + 2*a + 4]]) A.is_symmetric() L, d = A.indefinite_factorization() D = diagonal_matrix(d) L D A == L*D*L.transpose()This works correctly for the 0x0 matrix:
sage: Matrix(0).indefinite_factorization() ([], ())
>>> from sage.all import * >>> Matrix(Integer(0)).indefinite_factorization() ([], ())
Matrix(0).indefinite_factorization()
- integer_kernel(ring='ZZ')[source]¶
Return the kernel of this matrix over the given ring (which should be either the base ring, or a PID whose fraction field is the base ring).
Assume that the base field of this matrix has a numerator and denominator functions for its elements, e.g., it is the rational numbers or a fraction field. This function computes a basis over the integers for the kernel of
self.If the matrix is not coercible into QQ, then the PID itself should be given as a second argument, as in the third example below.
EXAMPLES:
sage: A = MatrixSpace(QQ, 4)(range(16)) sage: A.integer_kernel() Free module of degree 4 and rank 2 over Integer Ring Echelon basis matrix: [ 1 0 -3 2] [ 0 1 -2 1]
>>> from sage.all import * >>> A = MatrixSpace(QQ, Integer(4))(range(Integer(16))) >>> A.integer_kernel() Free module of degree 4 and rank 2 over Integer Ring Echelon basis matrix: [ 1 0 -3 2] [ 0 1 -2 1]
A = MatrixSpace(QQ, 4)(range(16)) A.integer_kernel()
The integer kernel even makes sense for matrices with fractional entries:
sage: A = MatrixSpace(QQ, 2)([1/2, 0, 0, 0]) sage: A.integer_kernel() Free module of degree 2 and rank 1 over Integer Ring Echelon basis matrix: [0 1]
>>> from sage.all import * >>> A = MatrixSpace(QQ, Integer(2))([Integer(1)/Integer(2), Integer(0), Integer(0), Integer(0)]) >>> A.integer_kernel() Free module of degree 2 and rank 1 over Integer Ring Echelon basis matrix: [0 1]
A = MatrixSpace(QQ, 2)([1/2, 0, 0, 0]) A.integer_kernel()
An example over a bigger ring:
sage: # needs sage.rings.number_field sage: x = polygen(ZZ, 'x') sage: L.<w> = NumberField(x^2 - x + 2) sage: OL = L.ring_of_integers() sage: A = matrix(L, 2, [1, w/2]) sage: A.integer_kernel(OL) Free module of degree 2 and rank 1 over Maximal Order generated by w in Number Field in w with defining polynomial x^2 - x + 2 Echelon basis matrix: [ -1 -w + 1]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> x = polygen(ZZ, 'x') >>> L = NumberField(x**Integer(2) - x + Integer(2), names=('w',)); (w,) = L._first_ngens(1) >>> OL = L.ring_of_integers() >>> A = matrix(L, Integer(2), [Integer(1), w/Integer(2)]) >>> A.integer_kernel(OL) Free module of degree 2 and rank 1 over Maximal Order generated by w in Number Field in w with defining polynomial x^2 - x + 2 Echelon basis matrix: [ -1 -w + 1]
# needs sage.rings.number_field x = polygen(ZZ, 'x') L.<w> = NumberField(x^2 - x + 2) OL = L.ring_of_integers() A = matrix(L, 2, [1, w/2]) A.integer_kernel(OL)
- inverse()[source]¶
Return the inverse of self, without changing
self.Note that one can use the Python inverse operator to obtain the inverse as well.
See also
EXAMPLES:
sage: m = matrix([[1,2],[3,4]]) sage: m^(-1) [ -2 1] [ 3/2 -1/2] sage: m.inverse() [ -2 1] [ 3/2 -1/2] sage: ~m [ -2 1] [ 3/2 -1/2]
>>> from sage.all import * >>> m = matrix([[Integer(1),Integer(2)],[Integer(3),Integer(4)]]) >>> m**(-Integer(1)) [ -2 1] [ 3/2 -1/2] >>> m.inverse() [ -2 1] [ 3/2 -1/2] >>> ~m [ -2 1] [ 3/2 -1/2]
m = matrix([[1,2],[3,4]]) m^(-1) m.inverse() ~m
sage: m = matrix([[1,2],[3,4]], sparse=True) sage: m^(-1) [ -2 1] [ 3/2 -1/2] sage: m.inverse() [ -2 1] [ 3/2 -1/2] sage: ~m [ -2 1] [ 3/2 -1/2]
>>> from sage.all import * >>> m = matrix([[Integer(1),Integer(2)],[Integer(3),Integer(4)]], sparse=True) >>> m**(-Integer(1)) [ -2 1] [ 3/2 -1/2] >>> m.inverse() [ -2 1] [ 3/2 -1/2] >>> ~m [ -2 1] [ 3/2 -1/2]
m = matrix([[1,2],[3,4]], sparse=True) m^(-1) m.inverse() ~m
>>> from sage.all import * >>> m = matrix([[Integer(1),Integer(2)],[Integer(3),Integer(4)]], sparse=True) >>> m**(-Integer(1)) [ -2 1] [ 3/2 -1/2] >>> m.inverse() [ -2 1] [ 3/2 -1/2] >>> ~m [ -2 1] [ 3/2 -1/2]
m = matrix([[1,2],[3,4]], sparse=True) m^(-1) m.inverse() ~m
- inverse_positive_definite()[source]¶
Compute the inverse of a positive-definite matrix.
In accord with
is_positive_definite(), only Hermitian matrices are considered positive-definite. Positive-definite matrices have several factorizations (Cholesky, LDLT, et cetera) that allow them to be inverted in a fast, numerically-stable way. This method uses an appropriate factorization, and is akin to thecholinvandchol2invfunctions available in R, Octave, and Stata.You should ensure that your matrix is positive-definite before using this method. When in doubt, use the generic
inverse()method instead.OUTPUT:
If the given matrix is positive-definite, the return value is the same as that of the
inverse()method. If the matrix is not positive-definite, the behavior of this function is undefined.EXAMPLES:
A simple two-by-two matrix with rational entries:
sage: A = matrix(QQ, [[ 2, -1], ....: [-1, 2]]) sage: A.is_positive_definite() True sage: A.inverse_positive_definite() [2/3 1/3] [1/3 2/3] sage: A.inverse_positive_definite() == A.inverse() True
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(2), -Integer(1)], ... [-Integer(1), Integer(2)]]) >>> A.is_positive_definite() True >>> A.inverse_positive_definite() [2/3 1/3] [1/3 2/3] >>> A.inverse_positive_definite() == A.inverse() True
A = matrix(QQ, [[ 2, -1], [-1, 2]]) A.is_positive_definite() A.inverse_positive_definite() A.inverse_positive_definite() == A.inverse()A matrix containing real roots:
sage: # needs sage.rings.number_field sage.symbolic sage: A = matrix(AA, [ [1, 0, sqrt(2)], ....: [0, sqrt(3), 0 ], ....: [sqrt(2), 0, sqrt(5)] ]) sage: A.is_positive_definite() True sage: B = matrix(AA, [ [2*sqrt(5) + 5, 0, -sqrt(8*sqrt(5) + 18)], ....: [0, sqrt(1/3), 0], ....: [-sqrt(8*sqrt(5) + 18), 0, sqrt(5) + 2] ]) sage: A.inverse_positive_definite() == B True sage: A*B == A.matrix_space().identity_matrix() True
>>> from sage.all import * >>> # needs sage.rings.number_field sage.symbolic >>> A = matrix(AA, [ [Integer(1), Integer(0), sqrt(Integer(2))], ... [Integer(0), sqrt(Integer(3)), Integer(0) ], ... [sqrt(Integer(2)), Integer(0), sqrt(Integer(5))] ]) >>> A.is_positive_definite() True >>> B = matrix(AA, [ [Integer(2)*sqrt(Integer(5)) + Integer(5), Integer(0), -sqrt(Integer(8)*sqrt(Integer(5)) + Integer(18))], ... [Integer(0), sqrt(Integer(1)/Integer(3)), Integer(0)], ... [-sqrt(Integer(8)*sqrt(Integer(5)) + Integer(18)), Integer(0), sqrt(Integer(5)) + Integer(2)] ]) >>> A.inverse_positive_definite() == B True >>> A*B == A.matrix_space().identity_matrix() True
# needs sage.rings.number_field sage.symbolic A = matrix(AA, [ [1, 0, sqrt(2)], [0, sqrt(3), 0 ], [sqrt(2), 0, sqrt(5)] ]) A.is_positive_definite() B = matrix(AA, [ [2*sqrt(5) + 5, 0, -sqrt(8*sqrt(5) + 18)], [0, sqrt(1/3), 0], [-sqrt(8*sqrt(5) + 18), 0, sqrt(5) + 2] ]) A.inverse_positive_definite() == B A*B == A.matrix_space().identity_matrix()A Hermitian (but not symmetric) matrix with complex entries:
sage: # needs sage.rings.number_field sage.symbolic sage: A = matrix(QQbar, [ [ 1, 0, I ], ....: [ 0, sqrt(5), 0 ], ....: [-I, 0, 3 ] ]) sage: A.is_positive_definite() True sage: B = matrix(QQbar, [ [ 3/2, 0, -I/2 ], ....: [ 0, sqrt(1/5), 0 ], ....: [ I/2, 0, 1/2 ] ]) sage: A.inverse_positive_definite() == B True sage: A*B == A.matrix_space().identity_matrix() True
>>> from sage.all import * >>> # needs sage.rings.number_field sage.symbolic >>> A = matrix(QQbar, [ [ Integer(1), Integer(0), I ], ... [ Integer(0), sqrt(Integer(5)), Integer(0) ], ... [-I, Integer(0), Integer(3) ] ]) >>> A.is_positive_definite() True >>> B = matrix(QQbar, [ [ Integer(3)/Integer(2), Integer(0), -I/Integer(2) ], ... [ Integer(0), sqrt(Integer(1)/Integer(5)), Integer(0) ], ... [ I/Integer(2), Integer(0), Integer(1)/Integer(2) ] ]) >>> A.inverse_positive_definite() == B True >>> A*B == A.matrix_space().identity_matrix() True
# needs sage.rings.number_field sage.symbolic A = matrix(QQbar, [ [ 1, 0, I ], [ 0, sqrt(5), 0 ], [-I, 0, 3 ] ]) A.is_positive_definite() B = matrix(QQbar, [ [ 3/2, 0, -I/2 ], [ 0, sqrt(1/5), 0 ], [ I/2, 0, 1/2 ] ]) A.inverse_positive_definite() == B A*B == A.matrix_space().identity_matrix()
- is_Z_operator_on(K)[source]¶
Determine if this matrix is a Z-operator on a cone.
We say that a matrix \(L\) is a Z-operator on a closed convex cone \(K\) if the inner product of \(Lx\) and \(s\) is nonpositive for all pairs of orthogonal vectors \(x\) in \(K\) and \(s\) in the dual of \(K\). This property need only be checked for generators of \(K\) and its dual.
A matrix is a Z-operator on \(K\) if and only if its negation is a cross-positive operator on \(K\).
To reliably check whether or not this matrix is a Z operator, its base ring must be either exact (for example, the rationals) or the symbolic ring. An exact ring is more reliable, but in some cases a matrix whose entries contain symbolic constants like \(e\) and \(\pi\) will work.
INPUT:
K– a polyhedral closed convex cone
OUTPUT:
If the base ring of this matrix is exact, then
Truewill be returned if and only if this matrix is a Z-operator onK.If the base ring of this matrix is symbolic, then the situation is more complicated:
Truewill be returned if it can be proven that this matrix is a Z-operator onK.Falsewill be returned if it can be proven that this matrix is not a Z-operator onK.Falsewill also be returned if we can’t decide; specifically if we arrive at a symbolic inequality that cannot be resolved.
REFERENCES:
A. Berman and R. J. Plemmons. Nonnegative Matrices in the Mathematical Sciences. SIAM, Philadelphia, 1994.
EXAMPLES:
Z-matrices are Z-operators on the nonnegative orthant:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = matrix(SR, [ [-1, -2, 0], # needs sage.symbolic ....: [ 0, 2, -7], ....: [-3, 0, 3] ]) sage: L.is_Z_operator_on(K) # needs sage.geometry.polyhedron sage.symbolic True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = matrix(SR, [ [-Integer(1), -Integer(2), Integer(0)], # needs sage.symbolic ... [ Integer(0), Integer(2), -Integer(7)], ... [-Integer(3), Integer(0), Integer(3)] ]) >>> L.is_Z_operator_on(K) # needs sage.geometry.polyhedron sage.symbolic True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = matrix(SR, [ [-1, -2, 0], # needs sage.symbolic [ 0, 2, -7], [-3, 0, 3] ]) L.is_Z_operator_on(K) # needs sage.geometry.polyhedron sage.symbolicSymbolic entries also work in some easy cases:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = matrix(SR, [ [-1, -e, 0 ], # needs sage.symbolic ....: [ 0, 2, -pi], ....: [-sqrt(2), 0, 3 ] ]) sage: L.is_Z_operator_on(K) # needs sage.geometry.polyhedron sage.symbolic True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = matrix(SR, [ [-Integer(1), -e, Integer(0) ], # needs sage.symbolic ... [ Integer(0), Integer(2), -pi], ... [-sqrt(Integer(2)), Integer(0), Integer(3) ] ]) >>> L.is_Z_operator_on(K) # needs sage.geometry.polyhedron sage.symbolic True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = matrix(SR, [ [-1, -e, 0 ], # needs sage.symbolic [ 0, 2, -pi], [-sqrt(2), 0, 3 ] ]) L.is_Z_operator_on(K) # needs sage.geometry.polyhedron sage.symbolic
- is_bistochastic(normalized=True)[source]¶
Return
Trueif this matrix is bistochastic.A matrix is said to be bistochastic if both the sums of the entries of each row and the sum of the entries of each column are equal to 1 and all entries are nonnegative.
INPUT:
normalized– if set toTrue(default), checks that the sums are equal to 1. When set toFalse, checks that the row sums and column sums are all equal to some constant possibly different from 1.
EXAMPLES:
The identity matrix is clearly bistochastic:
sage: Matrix(5,5,1).is_bistochastic() True
>>> from sage.all import * >>> Matrix(Integer(5),Integer(5),Integer(1)).is_bistochastic() True
Matrix(5,5,1).is_bistochastic()
The same matrix, multiplied by 2, is not bistochastic anymore, though is verifies the constraints of
normalized == False:sage: (2 * Matrix(5,5,1)).is_bistochastic() False sage: (2 * Matrix(5,5,1)).is_bistochastic(normalized=False) True
>>> from sage.all import * >>> (Integer(2) * Matrix(Integer(5),Integer(5),Integer(1))).is_bistochastic() False >>> (Integer(2) * Matrix(Integer(5),Integer(5),Integer(1))).is_bistochastic(normalized=False) True
(2 * Matrix(5,5,1)).is_bistochastic() (2 * Matrix(5,5,1)).is_bistochastic(normalized=False)
Here is a matrix whose row and column sums is 1, but not all entries are nonnegative:
sage: m = matrix([[-1,2],[2,-1]]) sage: m.is_bistochastic() False
>>> from sage.all import * >>> m = matrix([[-Integer(1),Integer(2)],[Integer(2),-Integer(1)]]) >>> m.is_bistochastic() False
m = matrix([[-1,2],[2,-1]]) m.is_bistochastic()
- is_cross_positive_on(K)[source]¶
Determine if this matrix is cross-positive on a cone.
We say that a matrix \(L\) is cross-positive on a closed convex cone \(K\) if the inner product of \(Lx\) and \(s\) is nonnegative for all pairs of orthogonal vectors \(x\) in \(K\) and \(s\) in the dual of \(K\). This property need only be checked for generators of \(K\) and its dual.
To reliably check whether or not this matrix is cross-positive, its base ring must be either exact (for example, the rationals) or the symbolic ring. An exact ring is more reliable, but in some cases a matrix whose entries contain symbolic constants like \(e\) and \(\pi\) will work.
INPUT:
K– a polyhedral closed convex cone
OUTPUT:
If the base ring of this matrix is exact, then
Truewill be returned if and only if this matrix is cross-positive onK.If the base ring of this matrix is symbolic, then the situation is more complicated:
Truewill be returned if it can be proven that this matrix is cross-positive onK.Falsewill be returned if it can be proven that this matrix is not cross-positive onK.Falsewill also be returned if we can’t decide; specifically if we arrive at a symbolic inequality that cannot be resolved.
REFERENCES:
H. Schneider and M. Vidyasagar. Cross-positive matrices. SIAM Journal on Numerical Analysis, 7:508-519, 1970.
EXAMPLES:
Negative Z-matrices are cross-positive operators on the nonnegative orthant:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = matrix(SR, [ [-1, 2, 0], # needs sage.symbolic ....: [ 0, 2, 7], ....: [ 3, 0, 3] ]) sage: L.is_cross_positive_on(K) # needs sage.geometry.polyhedron sage.symbolic True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = matrix(SR, [ [-Integer(1), Integer(2), Integer(0)], # needs sage.symbolic ... [ Integer(0), Integer(2), Integer(7)], ... [ Integer(3), Integer(0), Integer(3)] ]) >>> L.is_cross_positive_on(K) # needs sage.geometry.polyhedron sage.symbolic True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = matrix(SR, [ [-1, 2, 0], # needs sage.symbolic [ 0, 2, 7], [ 3, 0, 3] ]) L.is_cross_positive_on(K) # needs sage.geometry.polyhedron sage.symbolicSymbolic entries also work in some easy cases:
sage: K = Cone([(1,0,0),(0,1,0),(0,0,1)]) # needs sage.geometry.polyhedron sage: L = matrix(SR, [ [-1, e, 0 ], # needs sage.symbolic ....: [ 0, 2, pi], ....: [ sqrt(2), 0, 3 ] ]) sage: L.is_cross_positive_on(K) # needs sage.geometry.polyhedron sage.symbolic True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)),(Integer(0),Integer(1),Integer(0)),(Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = matrix(SR, [ [-Integer(1), e, Integer(0) ], # needs sage.symbolic ... [ Integer(0), Integer(2), pi], ... [ sqrt(Integer(2)), Integer(0), Integer(3) ] ]) >>> L.is_cross_positive_on(K) # needs sage.geometry.polyhedron sage.symbolic True
K = Cone([(1,0,0),(0,1,0),(0,0,1)]) # needs sage.geometry.polyhedron L = matrix(SR, [ [-1, e, 0 ], # needs sage.symbolic [ 0, 2, pi], [ sqrt(2), 0, 3 ] ]) L.is_cross_positive_on(K) # needs sage.geometry.polyhedron sage.symbolic
- is_diagonal()[source]¶
Return
Trueif this matrix is a diagonal matrix.OUTPUT: boolean
EXAMPLES:
sage: m = matrix(QQ, 2,2, range(4)) sage: m.is_diagonal() False sage: m = matrix(QQ, 2, [5,0,0,5]) sage: m.is_diagonal() True sage: m = matrix(QQ, 2, [1,0,0,1]) sage: m.is_diagonal() True sage: m = matrix(QQ, 2, [1,1,1,1]) sage: m.is_diagonal() False
>>> from sage.all import * >>> m = matrix(QQ, Integer(2),Integer(2), range(Integer(4))) >>> m.is_diagonal() False >>> m = matrix(QQ, Integer(2), [Integer(5),Integer(0),Integer(0),Integer(5)]) >>> m.is_diagonal() True >>> m = matrix(QQ, Integer(2), [Integer(1),Integer(0),Integer(0),Integer(1)]) >>> m.is_diagonal() True >>> m = matrix(QQ, Integer(2), [Integer(1),Integer(1),Integer(1),Integer(1)]) >>> m.is_diagonal() False
m = matrix(QQ, 2,2, range(4)) m.is_diagonal() m = matrix(QQ, 2, [5,0,0,5]) m.is_diagonal() m = matrix(QQ, 2, [1,0,0,1]) m.is_diagonal() m = matrix(QQ, 2, [1,1,1,1]) m.is_diagonal()
- is_diagonalizable(base_field=None)[source]¶
Determine if the matrix is similar to a diagonal matrix.
INPUT:
base_field– a new field to use for entries of the matrix
OUTPUT:
If
selfis the matrix \(A\), then it is diagonalizable if there is an invertible matrix \(P\) and a diagonal matrix \(D\) such that\[P^{-1}AP = D\]This routine returns
Trueifselfis diagonalizable. The diagonal entries of the matrix \(D\) are the eigenvalues of \(A\).A matrix not diagonalizable over the base field may become diagonalizable by extending the base field to contain all of the eigenvalues. Over the rationals, the field of algebraic numbers,
sage.rings.qqbaris a good choice.To obtain the matrices \(D\) and \(P\), use the
diagonalization()method.ALGORITHM:
For each eigenvalue, this routine checks that the algebraic multiplicity (number of occurrences as a root of the characteristic polynomial) is equal to the geometric multiplicity (dimension of the eigenspace), which is sufficient to ensure a basis of eigenvectors for the columns of \(P\).
EXAMPLES:
A matrix that is diagonalizable over the rationals:
sage: A = matrix(QQ, [[-7, 16, 12, 0, 6], ....: [-9, 15, 0, 12, -27], ....: [ 9, -8, 11, -12, 51], ....: [ 3, -4, 0, -1, 9], ....: [-1, 0, -4, 4, -12]]) sage: A.is_diagonalizable() # needs sage.libs.pari True sage: A.diagonalization() # needs sage.libs.pari ( [ 2 0 0 0 0] [ 1 1 0 1 0] [ 0 3 0 0 0] [ 1/2 0 1 0 1] [ 0 0 3 0 0] [ 1/6 1 -3/2 2/3 -14/9] [ 0 0 0 -1 0] [ -1/6 0 -1/4 0 -1/3] [ 0 0 0 0 -1], [ -1/6 -1/3 1/3 -1/3 4/9] )
>>> from sage.all import * >>> A = matrix(QQ, [[-Integer(7), Integer(16), Integer(12), Integer(0), Integer(6)], ... [-Integer(9), Integer(15), Integer(0), Integer(12), -Integer(27)], ... [ Integer(9), -Integer(8), Integer(11), -Integer(12), Integer(51)], ... [ Integer(3), -Integer(4), Integer(0), -Integer(1), Integer(9)], ... [-Integer(1), Integer(0), -Integer(4), Integer(4), -Integer(12)]]) >>> A.is_diagonalizable() # needs sage.libs.pari True >>> A.diagonalization() # needs sage.libs.pari ( [ 2 0 0 0 0] [ 1 1 0 1 0] [ 0 3 0 0 0] [ 1/2 0 1 0 1] [ 0 0 3 0 0] [ 1/6 1 -3/2 2/3 -14/9] [ 0 0 0 -1 0] [ -1/6 0 -1/4 0 -1/3] [ 0 0 0 0 -1], [ -1/6 -1/3 1/3 -1/3 4/9] )
A = matrix(QQ, [[-7, 16, 12, 0, 6], [-9, 15, 0, 12, -27], [ 9, -8, 11, -12, 51], [ 3, -4, 0, -1, 9], [-1, 0, -4, 4, -12]]) A.is_diagonalizable() # needs sage.libs.pari A.diagonalization() # needs sage.libs.pariThis is a matrix not diagonalizable over the rationals, but you can still get its Jordan form.
sage: A = matrix(QQ, [[-3, -14, 2, -1, 15], ....: [4, 6, -2, 3, -8], ....: [-2, -14, 0, 0, 10], ....: [3, 13, -2, 0, -11], ....: [-1, 6, 1, -3, 1]]) sage: A.is_diagonalizable() # needs sage.libs.pari False sage: A.jordan_form(subdivide=False) # needs sage.combinat sage.libs.pari [-1 1 0 0 0] [ 0 -1 0 0 0] [ 0 0 2 1 0] [ 0 0 0 2 1] [ 0 0 0 0 2]
>>> from sage.all import * >>> A = matrix(QQ, [[-Integer(3), -Integer(14), Integer(2), -Integer(1), Integer(15)], ... [Integer(4), Integer(6), -Integer(2), Integer(3), -Integer(8)], ... [-Integer(2), -Integer(14), Integer(0), Integer(0), Integer(10)], ... [Integer(3), Integer(13), -Integer(2), Integer(0), -Integer(11)], ... [-Integer(1), Integer(6), Integer(1), -Integer(3), Integer(1)]]) >>> A.is_diagonalizable() # needs sage.libs.pari False >>> A.jordan_form(subdivide=False) # needs sage.combinat sage.libs.pari [-1 1 0 0 0] [ 0 -1 0 0 0] [ 0 0 2 1 0] [ 0 0 0 2 1] [ 0 0 0 0 2]
A = matrix(QQ, [[-3, -14, 2, -1, 15], [4, 6, -2, 3, -8], [-2, -14, 0, 0, 10], [3, 13, -2, 0, -11], [-1, 6, 1, -3, 1]]) A.is_diagonalizable() # needs sage.libs.pari A.jordan_form(subdivide=False) # needs sage.combinat sage.libs.pariIf any eigenvalue of a matrix is outside the base ring, then this routine raises an error. However, the ring can be extended to contain the eigenvalues.
sage: A = matrix(QQ, [[1, 0, 1, 1, -1], ....: [0, 1, 0, 4, 8], ....: [2, 1, 3, 5, 1], ....: [2, -1, 1, 0, -2], ....: [0, -1, -1, -5, -8]]) sage: [e in QQ for e in A.eigenvalues()] # needs sage.rings.number_field [False, False, False, False, False] sage: A.is_diagonalizable() # needs sage.libs.pari False sage: A.diagonalization() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: not diagonalizable over Rational Field sage: [e in QQbar for e in A.eigenvalues()] # needs sage.rings.number_field [True, True, True, True, True] sage: A.is_diagonalizable(base_field=QQbar) # needs sage.rings.number_field True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), Integer(0), Integer(1), Integer(1), -Integer(1)], ... [Integer(0), Integer(1), Integer(0), Integer(4), Integer(8)], ... [Integer(2), Integer(1), Integer(3), Integer(5), Integer(1)], ... [Integer(2), -Integer(1), Integer(1), Integer(0), -Integer(2)], ... [Integer(0), -Integer(1), -Integer(1), -Integer(5), -Integer(8)]]) >>> [e in QQ for e in A.eigenvalues()] # needs sage.rings.number_field [False, False, False, False, False] >>> A.is_diagonalizable() # needs sage.libs.pari False >>> A.diagonalization() # needs sage.libs.pari Traceback (most recent call last): ... ValueError: not diagonalizable over Rational Field >>> [e in QQbar for e in A.eigenvalues()] # needs sage.rings.number_field [True, True, True, True, True] >>> A.is_diagonalizable(base_field=QQbar) # needs sage.rings.number_field True
A = matrix(QQ, [[1, 0, 1, 1, -1], [0, 1, 0, 4, 8], [2, 1, 3, 5, 1], [2, -1, 1, 0, -2], [0, -1, -1, -5, -8]]) [e in QQ for e in A.eigenvalues()] # needs sage.rings.number_field A.is_diagonalizable() # needs sage.libs.pari A.diagonalization() # needs sage.libs.pari [e in QQbar for e in A.eigenvalues()] # needs sage.rings.number_field A.is_diagonalizable(base_field=QQbar) # needs sage.rings.number_fieldOther exact fields may be employed, though it will not always be possible to extend their base fields to contain all the eigenvalues.
sage: # needs sage.rings.finite_rings sage: F.<b> = FiniteField(5^2) sage: A = matrix(F, [[ 4, 3*b + 2, 3*b + 1, 3*b + 4], ....: [2*b + 1, 4*b, 0, 2], ....: [ 4*b, b + 2, 2*b + 3, 3], ....: [ 2*b, 3*b, 4*b + 4, 3*b + 3]]) sage: A.is_diagonalizable() False sage: A.jordan_form() # needs sage.combinat [ 4 1| 0 0] [ 0 4| 0 0] [---------------+---------------] [ 0 0|2*b + 1 1] [ 0 0| 0 2*b + 1] sage: # needs sage.rings.number_field sage: F.<c> = QuadraticField(-7) sage: A = matrix(F, [[ c + 3, 2*c - 2, -2*c + 2, c - 1], ....: [2*c + 10, 13*c + 15, -13*c - 17, 11*c + 31], ....: [2*c + 10, 14*c + 10, -14*c - 12, 12*c + 30], ....: [ 0, 2*c - 2, -2*c + 2, 2*c + 2]]) sage: A.is_diagonalizable() True sage: A.diagonalization() ( [ 4 0 0 0] [ 1 0 1 0] [ 0 -2 0 0] [ 4 1 0 1] [ 0 0 c + 3 0] [ 5 1 -2/9 10/9] [ 0 0 0 c + 3], [ 1 0 -4/9 2/9] )
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(5)**Integer(2), names=('b',)); (b,) = F._first_ngens(1) >>> A = matrix(F, [[ Integer(4), Integer(3)*b + Integer(2), Integer(3)*b + Integer(1), Integer(3)*b + Integer(4)], ... [Integer(2)*b + Integer(1), Integer(4)*b, Integer(0), Integer(2)], ... [ Integer(4)*b, b + Integer(2), Integer(2)*b + Integer(3), Integer(3)], ... [ Integer(2)*b, Integer(3)*b, Integer(4)*b + Integer(4), Integer(3)*b + Integer(3)]]) >>> A.is_diagonalizable() False >>> A.jordan_form() # needs sage.combinat [ 4 1| 0 0] [ 0 4| 0 0] [---------------+---------------] [ 0 0|2*b + 1 1] [ 0 0| 0 2*b + 1] >>> # needs sage.rings.number_field >>> F = QuadraticField(-Integer(7), names=('c',)); (c,) = F._first_ngens(1) >>> A = matrix(F, [[ c + Integer(3), Integer(2)*c - Integer(2), -Integer(2)*c + Integer(2), c - Integer(1)], ... [Integer(2)*c + Integer(10), Integer(13)*c + Integer(15), -Integer(13)*c - Integer(17), Integer(11)*c + Integer(31)], ... [Integer(2)*c + Integer(10), Integer(14)*c + Integer(10), -Integer(14)*c - Integer(12), Integer(12)*c + Integer(30)], ... [ Integer(0), Integer(2)*c - Integer(2), -Integer(2)*c + Integer(2), Integer(2)*c + Integer(2)]]) >>> A.is_diagonalizable() True >>> A.diagonalization() ( [ 4 0 0 0] [ 1 0 1 0] [ 0 -2 0 0] [ 4 1 0 1] [ 0 0 c + 3 0] [ 5 1 -2/9 10/9] [ 0 0 0 c + 3], [ 1 0 -4/9 2/9] )
# needs sage.rings.finite_rings F.<b> = FiniteField(5^2) A = matrix(F, [[ 4, 3*b + 2, 3*b + 1, 3*b + 4], [2*b + 1, 4*b, 0, 2], [ 4*b, b + 2, 2*b + 3, 3], [ 2*b, 3*b, 4*b + 4, 3*b + 3]]) A.is_diagonalizable() A.jordan_form() # needs sage.combinat # needs sage.rings.number_field F.<c> = QuadraticField(-7) A = matrix(F, [[ c + 3, 2*c - 2, -2*c + 2, c - 1], [2*c + 10, 13*c + 15, -13*c - 17, 11*c + 31], [2*c + 10, 14*c + 10, -14*c - 12, 12*c + 30], [ 0, 2*c - 2, -2*c + 2, 2*c + 2]]) A.is_diagonalizable() A.diagonalization()A trivial matrix is diagonalizable, trivially.
sage: A = matrix(QQ, 0, 0) sage: A.is_diagonalizable() # needs sage.libs.pari True
>>> from sage.all import * >>> A = matrix(QQ, Integer(0), Integer(0)) >>> A.is_diagonalizable() # needs sage.libs.pari True
A = matrix(QQ, 0, 0) A.is_diagonalizable() # needs sage.libs.pari
A matrix must be square to be diagonalizable.
sage: A = matrix(QQ, 3, 4) sage: A.is_diagonalizable() Traceback (most recent call last): ... TypeError: not a square matrix
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(4)) >>> A.is_diagonalizable() Traceback (most recent call last): ... TypeError: not a square matrix
A = matrix(QQ, 3, 4) A.is_diagonalizable()
The matrix must have entries from a field, and it must be an exact field.
sage: A = matrix(ZZ, 4, range(16)) sage: A.is_diagonalizable() Traceback (most recent call last): ... ValueError: matrix entries must be from a field sage: A = matrix(RDF, 4, range(16)) sage: A.is_diagonalizable() Traceback (most recent call last): ... ValueError: base field must be exact, but Real Double Field is not
>>> from sage.all import * >>> A = matrix(ZZ, Integer(4), range(Integer(16))) >>> A.is_diagonalizable() Traceback (most recent call last): ... ValueError: matrix entries must be from a field >>> A = matrix(RDF, Integer(4), range(Integer(16))) >>> A.is_diagonalizable() Traceback (most recent call last): ... ValueError: base field must be exact, but Real Double Field is not
A = matrix(ZZ, 4, range(16)) A.is_diagonalizable() A = matrix(RDF, 4, range(16)) A.is_diagonalizable()
- is_lyapunov_like_on(K)[source]¶
Determine if this matrix is Lyapunov-like on a cone.
We say that a matrix \(L\) is Lyapunov-like on a closed convex cone \(K\) if the inner product of \(Lx\) and \(s\) is zero for all pairs of orthogonal vectors \(x\) in \(K\) and \(s\) in the dual of \(K\). This property need only be checked for generators of \(K\) and its dual.
An operator is Lyapunov-like on \(K\) if and only if both the operator itself and its negation are cross-positive on \(K\).
To reliably check whether or not this matrix is Lyapunov-like, its base ring must be either exact (for example, the rationals) or the symbolic ring. An exact ring is more reliable, but in some cases a matrix whose entries contain symbolic constants like \(e\) and \(\pi\) will work.
INPUT:
K– a polyhedral closed convex cone
OUTPUT:
If the base ring of this matrix is exact, then
Truewill be returned if and only if this matrix is Lyapunov-like onK.If the base ring of this matrix is symbolic, then the situation is more complicated:
Truewill be returned if it can be proven that this matrix is Lyapunov-like onK.Falsewill be returned if it can be proven that this matrix is not Lyapunov-like onK.Falsewill also be returned if we can’t decide; specifically if we arrive at a symbolic inequality that cannot be resolved.
REFERENCES:
EXAMPLES:
Diagonal matrices are Lyapunov-like operators on the nonnegative orthant:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = diagonal_matrix(random_vector(QQ, 3)) sage: L.is_lyapunov_like_on(K) # needs sage.geometry.polyhedron True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = diagonal_matrix(random_vector(QQ, Integer(3))) >>> L.is_lyapunov_like_on(K) # needs sage.geometry.polyhedron True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = diagonal_matrix(random_vector(QQ, 3)) L.is_lyapunov_like_on(K) # needs sage.geometry.polyhedron
Symbolic entries also work in some easy cases:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = matrix(SR, [ [e, 0, 0 ], # needs sage.symbolic ....: [0, pi, 0 ], ....: [0, 0, sqrt(2)] ]) sage: L.is_lyapunov_like_on(K) # needs sage.geometry.polyhedron True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = matrix(SR, [ [e, Integer(0), Integer(0) ], # needs sage.symbolic ... [Integer(0), pi, Integer(0) ], ... [Integer(0), Integer(0), sqrt(Integer(2))] ]) >>> L.is_lyapunov_like_on(K) # needs sage.geometry.polyhedron True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = matrix(SR, [ [e, 0, 0 ], # needs sage.symbolic [0, pi, 0 ], [0, 0, sqrt(2)] ]) L.is_lyapunov_like_on(K) # needs sage.geometry.polyhedron
- is_nilpotent()[source]¶
Return if
selfis a nilpotent matrix.A matrix \(A\) is nilpotent if there exists a positive integer \(k\) such that \(A^k = 0\). We test this by using the Cayley-Hamilton theorem to see if the characteristic polynomial is \(x^n = 0\).
EXAMPLES:
sage: A = matrix([[0,2,1,6], [0,0,1,2], [0,0,0,3], [0,0,0,0]]) sage: A.is_nilpotent() True sage: B = matrix([[2,2,2,2,-4], [7,1,1,1,-5], [1,7,1,1,-5], ....: [1,1,7,1,-5], [1,1,1,7,-5]]) sage: B.is_nilpotent() True sage: C = matrix(GF(7), [[1, 2], [2, 6]]) sage: C.is_nilpotent() False sage: D = matrix([[1,0],[0,0]]) sage: D.is_nilpotent() False sage: Z = matrix.zero(QQ, 5) sage: Z.is_nilpotent() True
>>> from sage.all import * >>> A = matrix([[Integer(0),Integer(2),Integer(1),Integer(6)], [Integer(0),Integer(0),Integer(1),Integer(2)], [Integer(0),Integer(0),Integer(0),Integer(3)], [Integer(0),Integer(0),Integer(0),Integer(0)]]) >>> A.is_nilpotent() True >>> B = matrix([[Integer(2),Integer(2),Integer(2),Integer(2),-Integer(4)], [Integer(7),Integer(1),Integer(1),Integer(1),-Integer(5)], [Integer(1),Integer(7),Integer(1),Integer(1),-Integer(5)], ... [Integer(1),Integer(1),Integer(7),Integer(1),-Integer(5)], [Integer(1),Integer(1),Integer(1),Integer(7),-Integer(5)]]) >>> B.is_nilpotent() True >>> C = matrix(GF(Integer(7)), [[Integer(1), Integer(2)], [Integer(2), Integer(6)]]) >>> C.is_nilpotent() False >>> D = matrix([[Integer(1),Integer(0)],[Integer(0),Integer(0)]]) >>> D.is_nilpotent() False >>> Z = matrix.zero(QQ, Integer(5)) >>> Z.is_nilpotent() True
A = matrix([[0,2,1,6], [0,0,1,2], [0,0,0,3], [0,0,0,0]]) A.is_nilpotent() B = matrix([[2,2,2,2,-4], [7,1,1,1,-5], [1,7,1,1,-5], [1,1,7,1,-5], [1,1,1,7,-5]]) B.is_nilpotent() C = matrix(GF(7), [[1, 2], [2, 6]]) C.is_nilpotent() D = matrix([[1,0],[0,0]]) D.is_nilpotent() Z = matrix.zero(QQ, 5) Z.is_nilpotent()
- is_normal()[source]¶
Return
Trueif the matrix commutes with its conjugate-transpose.OUTPUT:
Trueif the matrix is square and commutes with its conjugate-transpose, andFalseotherwise.Normal matrices are precisely those that can be diagonalized by a unitary matrix.
This routine is for matrices over exact rings and so may not work properly for matrices over
RRorCC. For matrices with approximate entries, the rings of double-precision floating-point numbers,RDFandCDF, are a better choice since thesage.matrix.matrix_double_dense.Matrix_double_dense.is_normal()method has a tolerance parameter. This provides control over allowing for minor discrepancies between entries when checking equality.The result is cached.
EXAMPLES:
Hermitian matrices are normal.
sage: # needs sage.symbolic sage: A = matrix(QQ, 5, 5, range(25)) + I*matrix(QQ, 5, 5, range(0, 50, 2)) sage: B = A*A.conjugate_transpose() sage: B.is_hermitian() True sage: B.is_normal() True
>>> from sage.all import * >>> # needs sage.symbolic >>> A = matrix(QQ, Integer(5), Integer(5), range(Integer(25))) + I*matrix(QQ, Integer(5), Integer(5), range(Integer(0), Integer(50), Integer(2))) >>> B = A*A.conjugate_transpose() >>> B.is_hermitian() True >>> B.is_normal() True
# needs sage.symbolic A = matrix(QQ, 5, 5, range(25)) + I*matrix(QQ, 5, 5, range(0, 50, 2)) B = A*A.conjugate_transpose() B.is_hermitian() B.is_normal()
Circulant matrices are normal.
sage: # needs sage.graphs sage: G = graphs.CirculantGraph(20, [3, 7]) sage: D = digraphs.Circuit(20) sage: A = 3*D.adjacency_matrix() - 5*G.adjacency_matrix() sage: A.is_normal() True
>>> from sage.all import * >>> # needs sage.graphs >>> G = graphs.CirculantGraph(Integer(20), [Integer(3), Integer(7)]) >>> D = digraphs.Circuit(Integer(20)) >>> A = Integer(3)*D.adjacency_matrix() - Integer(5)*G.adjacency_matrix() >>> A.is_normal() True
# needs sage.graphs G = graphs.CirculantGraph(20, [3, 7]) D = digraphs.Circuit(20) A = 3*D.adjacency_matrix() - 5*G.adjacency_matrix() A.is_normal()
Skew-symmetric matrices are normal.
sage: A = matrix(QQ, 5, 5, range(25)) sage: B = A - A.transpose() sage: B.is_skew_symmetric() True sage: B.is_normal() True
>>> from sage.all import * >>> A = matrix(QQ, Integer(5), Integer(5), range(Integer(25))) >>> B = A - A.transpose() >>> B.is_skew_symmetric() True >>> B.is_normal() True
A = matrix(QQ, 5, 5, range(25)) B = A - A.transpose() B.is_skew_symmetric() B.is_normal()
A small matrix that does not fit into any of the usual categories of normal matrices.
sage: A = matrix(ZZ, [[1, -1], ....: [1, 1]]) sage: A.is_normal() True sage: not A.is_hermitian() and not A.is_skew_symmetric() True
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(1), -Integer(1)], ... [Integer(1), Integer(1)]]) >>> A.is_normal() True >>> not A.is_hermitian() and not A.is_skew_symmetric() True
A = matrix(ZZ, [[1, -1], [1, 1]]) A.is_normal() not A.is_hermitian() and not A.is_skew_symmetric()Sage has several fields besides the entire complex numbers where conjugation is non-trivial.
sage: # needs sage.rings.number_field sage: F.<b> = QuadraticField(-7) sage: C = matrix(F, [[-2*b - 3, 7*b - 6, -b + 3], ....: [-2*b - 3, -3*b + 2, -2*b], ....: [ b + 1, 0, -2]]) sage: C = C*C.conjugate_transpose() sage: C.is_normal() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> F = QuadraticField(-Integer(7), names=('b',)); (b,) = F._first_ngens(1) >>> C = matrix(F, [[-Integer(2)*b - Integer(3), Integer(7)*b - Integer(6), -b + Integer(3)], ... [-Integer(2)*b - Integer(3), -Integer(3)*b + Integer(2), -Integer(2)*b], ... [ b + Integer(1), Integer(0), -Integer(2)]]) >>> C = C*C.conjugate_transpose() >>> C.is_normal() True
# needs sage.rings.number_field F.<b> = QuadraticField(-7) C = matrix(F, [[-2*b - 3, 7*b - 6, -b + 3], [-2*b - 3, -3*b + 2, -2*b], [ b + 1, 0, -2]]) C = C*C.conjugate_transpose() C.is_normal()A matrix that is nearly normal, but for a non-real diagonal entry.
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[ 2, 2-I, 1+4*I], ....: [ 2+I, 3+I, 2-6*I], ....: [1-4*I, 2+6*I, 5]]) sage: A.is_normal() False sage: A[1,1] = 132 sage: A.is_normal() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[ Integer(2), Integer(2)-I, Integer(1)+Integer(4)*I], ... [ Integer(2)+I, Integer(3)+I, Integer(2)-Integer(6)*I], ... [Integer(1)-Integer(4)*I, Integer(2)+Integer(6)*I, Integer(5)]]) >>> A.is_normal() False >>> A[Integer(1),Integer(1)] = Integer(132) >>> A.is_normal() True
# needs sage.rings.number_field A = matrix(QQbar, [[ 2, 2-I, 1+4*I], [ 2+I, 3+I, 2-6*I], [1-4*I, 2+6*I, 5]]) A.is_normal() A[1,1] = 132 A.is_normal()Rectangular matrices are never normal.
sage: A = matrix(QQbar, 3, 4) # needs sage.rings.number_field sage: A.is_normal() # needs sage.rings.number_field False
>>> from sage.all import * >>> A = matrix(QQbar, Integer(3), Integer(4)) # needs sage.rings.number_field >>> A.is_normal() # needs sage.rings.number_field False
A = matrix(QQbar, 3, 4) # needs sage.rings.number_field A.is_normal() # needs sage.rings.number_field
A square, empty matrix is trivially normal.
sage: A = matrix(QQ, 0, 0) sage: A.is_normal() True
>>> from sage.all import * >>> A = matrix(QQ, Integer(0), Integer(0)) >>> A.is_normal() True
A = matrix(QQ, 0, 0) A.is_normal()
- is_one()[source]¶
Return
Trueif this matrix is the identity matrix.EXAMPLES:
sage: m = matrix(QQ, 2,2, range(4)) sage: m.is_one() False sage: m = matrix(QQ, 2, [5,0,0,5]) sage: m.is_one() False sage: m = matrix(QQ, 2, [1,0,0,1]) sage: m.is_one() True sage: m = matrix(QQ, 2, [1,1,1,1]) sage: m.is_one() False
>>> from sage.all import * >>> m = matrix(QQ, Integer(2),Integer(2), range(Integer(4))) >>> m.is_one() False >>> m = matrix(QQ, Integer(2), [Integer(5),Integer(0),Integer(0),Integer(5)]) >>> m.is_one() False >>> m = matrix(QQ, Integer(2), [Integer(1),Integer(0),Integer(0),Integer(1)]) >>> m.is_one() True >>> m = matrix(QQ, Integer(2), [Integer(1),Integer(1),Integer(1),Integer(1)]) >>> m.is_one() False
m = matrix(QQ, 2,2, range(4)) m.is_one() m = matrix(QQ, 2, [5,0,0,5]) m.is_one() m = matrix(QQ, 2, [1,0,0,1]) m.is_one() m = matrix(QQ, 2, [1,1,1,1]) m.is_one()
- is_permutation_of(N, check=False)[source]¶
Return
Trueif there exists a permutation of rows and columns sendingselftoNandFalseotherwise.INPUT:
N– a matrixcheck– boolean (default:False); ifFalsereturn Boolean indicating whether there exists a permutation of rows and columns sendingselftoNandFalseotherwise. IfTruereturn a tuple of a Boolean and a permutation mappingselftoNif such a permutation exists, and (False,None) if it does not.
OUTPUT: a Boolean or a tuple of a Boolean and a permutation
EXAMPLES:
sage: M = matrix(ZZ, [[1,2,3], [3,5,3], [2,6,4]]) sage: M [1 2 3] [3 5 3] [2 6 4] sage: N = matrix(ZZ, [[1,2,3], [2,6,4], [3,5,3]]) sage: N [1 2 3] [2 6 4] [3 5 3] sage: M.is_permutation_of(N) # needs sage.graphs True
>>> from sage.all import * >>> M = matrix(ZZ, [[Integer(1),Integer(2),Integer(3)], [Integer(3),Integer(5),Integer(3)], [Integer(2),Integer(6),Integer(4)]]) >>> M [1 2 3] [3 5 3] [2 6 4] >>> N = matrix(ZZ, [[Integer(1),Integer(2),Integer(3)], [Integer(2),Integer(6),Integer(4)], [Integer(3),Integer(5),Integer(3)]]) >>> N [1 2 3] [2 6 4] [3 5 3] >>> M.is_permutation_of(N) # needs sage.graphs True
M = matrix(ZZ, [[1,2,3], [3,5,3], [2,6,4]]) M N = matrix(ZZ, [[1,2,3], [2,6,4], [3,5,3]]) N M.is_permutation_of(N) # needs sage.graphs
Some examples that are not permutations of each other:
sage: N = matrix(ZZ, [[1,2,3], [4,5,6], [7,8,9]]); N [1 2 3] [4 5 6] [7 8 9] sage: M.is_permutation_of(N) # needs sage.graphs False sage: N = matrix(ZZ, [[1,2], [3,4]]); N [1 2] [3 4] sage: M.is_permutation_of(N) False
>>> from sage.all import * >>> N = matrix(ZZ, [[Integer(1),Integer(2),Integer(3)], [Integer(4),Integer(5),Integer(6)], [Integer(7),Integer(8),Integer(9)]]); N [1 2 3] [4 5 6] [7 8 9] >>> M.is_permutation_of(N) # needs sage.graphs False >>> N = matrix(ZZ, [[Integer(1),Integer(2)], [Integer(3),Integer(4)]]); N [1 2] [3 4] >>> M.is_permutation_of(N) False
N = matrix(ZZ, [[1,2,3], [4,5,6], [7,8,9]]); N M.is_permutation_of(N) # needs sage.graphs N = matrix(ZZ, [[1,2], [3,4]]); N M.is_permutation_of(N)
And for when
checkis True:sage: # needs sage.graphs sage.groups sage: N = matrix(ZZ, [[3,5,3], [2,6,4], [1,2,3]]); N [3 5 3] [2 6 4] [1 2 3] sage: r = M.is_permutation_of(N, check=True) sage: r (True, ((1,2,3), ())) sage: p = r[1] sage: M.with_permuted_rows_and_columns(*p) == N True
>>> from sage.all import * >>> # needs sage.graphs sage.groups >>> N = matrix(ZZ, [[Integer(3),Integer(5),Integer(3)], [Integer(2),Integer(6),Integer(4)], [Integer(1),Integer(2),Integer(3)]]); N [3 5 3] [2 6 4] [1 2 3] >>> r = M.is_permutation_of(N, check=True) >>> r (True, ((1,2,3), ())) >>> p = r[Integer(1)] >>> M.with_permuted_rows_and_columns(*p) == N True
# needs sage.graphs sage.groups N = matrix(ZZ, [[3,5,3], [2,6,4], [1,2,3]]); N r = M.is_permutation_of(N, check=True) r p = r[1] M.with_permuted_rows_and_columns(*p) == N
- is_positive_definite(certificate=False)[source]¶
Determine if a matrix is positive-definite.
A matrix \(A\) is positive definite if it
is_hermitian()and if, for every nonzero vector \(x\),\[\left\langle Ax, x \right\rangle > 0.\]ALGORITHM:
A Hermitian matrix is positive-definite if and only if the diagonal blocks in its
block_ldlt()factorization are all 1-by-1 and have positive entries. We first check that the matrixis_hermitian(), and then compute this factorization.INPUT:
self– a matrixcertificate– boolean (default:False); return the lower-triangular and diagonal parts of theblock_ldlt()factorization when the matrix is positive-definite. Deprecated.
OUTPUT:
This routine will return
Trueif the matrix is Hermitian and meets the condition above for the quadratic form.The base ring for the elements of the matrix must
Have a fraction field implemented; and
Be a subring of the real numbers, complex numbers, or symbolic ring.
If
certificateisTrue, a triplet(b, L, d)will be returned instead, withbcontaining the result (true or false). If the matrix is positive-definite, thenLanddwill contain the lower-triangular and diagonal parts of theblock_ldlt()factorization, respectively. Or if the matrix is not positive-definite (that is, ifbisFalse), then bothLanddwill beNone.See also
EXAMPLES:
A real symmetric matrix that is positive-definite, as evidenced by the positive determinants of its leading principal submatrices:
sage: A = matrix(QQ, [[ 4, -2, 4, 2], ....: [-2, 10, -2, -7], ....: [ 4, -2, 8, 4], ....: [ 2, -7, 4, 7]]) sage: A.is_positive_definite() True sage: [A[:i,:i].determinant() for i in range(1, A.nrows() + 1)] [4, 36, 144, 144]
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(4), -Integer(2), Integer(4), Integer(2)], ... [-Integer(2), Integer(10), -Integer(2), -Integer(7)], ... [ Integer(4), -Integer(2), Integer(8), Integer(4)], ... [ Integer(2), -Integer(7), Integer(4), Integer(7)]]) >>> A.is_positive_definite() True >>> [A[:i,:i].determinant() for i in range(Integer(1), A.nrows() + Integer(1))] [4, 36, 144, 144]
A = matrix(QQ, [[ 4, -2, 4, 2], [-2, 10, -2, -7], [ 4, -2, 8, 4], [ 2, -7, 4, 7]]) A.is_positive_definite() [A[:i,:i].determinant() for i in range(1, A.nrows() + 1)]A real symmetric matrix that is not positive-definite and a vector
uthat makes the corresponding quadratic form negative:sage: A = matrix(QQ, [[ 3, -6, 9, 6, -9], ....: [-6, 11, -16, -11, 17], ....: [ 9, -16, 28, 16, -40], ....: [ 6, -11, 16, 9, -19], ....: [-9, 17, -40, -19, 68]]) sage: A.is_positive_definite() False sage: u = vector(QQ, [2, 2, 0, 1, 0]) sage: (A*u).inner_product(u) -3
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(3), -Integer(6), Integer(9), Integer(6), -Integer(9)], ... [-Integer(6), Integer(11), -Integer(16), -Integer(11), Integer(17)], ... [ Integer(9), -Integer(16), Integer(28), Integer(16), -Integer(40)], ... [ Integer(6), -Integer(11), Integer(16), Integer(9), -Integer(19)], ... [-Integer(9), Integer(17), -Integer(40), -Integer(19), Integer(68)]]) >>> A.is_positive_definite() False >>> u = vector(QQ, [Integer(2), Integer(2), Integer(0), Integer(1), Integer(0)]) >>> (A*u).inner_product(u) -3
A = matrix(QQ, [[ 3, -6, 9, 6, -9], [-6, 11, -16, -11, 17], [ 9, -16, 28, 16, -40], [ 6, -11, 16, 9, -19], [-9, 17, -40, -19, 68]]) A.is_positive_definite() u = vector(QQ, [2, 2, 0, 1, 0]) (A*u).inner_product(u)Another real symmetric matrix that is not positive-definite and a vector
uthat makes the corresponding quadratic form zero:sage: A = matrix(QQ, [[21, 15, 12, -2], ....: [15, 12, 9, 6], ....: [12, 9, 7, 3], ....: [-2, 6, 3, 8]]) sage: A.is_positive_definite() False sage: u = vector(QQ, [1,1,-3,0]) sage: (A*u).inner_product(u) 0
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(21), Integer(15), Integer(12), -Integer(2)], ... [Integer(15), Integer(12), Integer(9), Integer(6)], ... [Integer(12), Integer(9), Integer(7), Integer(3)], ... [-Integer(2), Integer(6), Integer(3), Integer(8)]]) >>> A.is_positive_definite() False >>> u = vector(QQ, [Integer(1),Integer(1),-Integer(3),Integer(0)]) >>> (A*u).inner_product(u) 0
A = matrix(QQ, [[21, 15, 12, -2], [15, 12, 9, 6], [12, 9, 7, 3], [-2, 6, 3, 8]]) A.is_positive_definite() u = vector(QQ, [1,1,-3,0]) (A*u).inner_product(u)A complex Hermitian matrix that is positive-definite, confirmed by the positive determinants of its leading principal submatrices:
sage: # needs sage.rings.number_field sage: x = polygen(ZZ, 'x') sage: C.<I> = NumberField(x^2 + 1, embedding=CC(0,1)) sage: A = matrix(C, [[ 23, 17*I + 3, 24*I + 25, 21*I], ....: [ -17*I + 3, 38, -69*I + 89, 7*I + 15], ....: [-24*I + 25, 69*I + 89, 976, 24*I + 6], ....: [ -21*I, -7*I + 15, -24*I + 6, 28]]) sage: A.is_positive_definite() True sage: [A[:i,:i].determinant() for i in range(1,A.nrows()+1)] [23, 576, 359540, 2842600]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> x = polygen(ZZ, 'x') >>> C = NumberField(x**Integer(2) + Integer(1), embedding=CC(Integer(0),Integer(1)), names=('I',)); (I,) = C._first_ngens(1) >>> A = matrix(C, [[ Integer(23), Integer(17)*I + Integer(3), Integer(24)*I + Integer(25), Integer(21)*I], ... [ -Integer(17)*I + Integer(3), Integer(38), -Integer(69)*I + Integer(89), Integer(7)*I + Integer(15)], ... [-Integer(24)*I + Integer(25), Integer(69)*I + Integer(89), Integer(976), Integer(24)*I + Integer(6)], ... [ -Integer(21)*I, -Integer(7)*I + Integer(15), -Integer(24)*I + Integer(6), Integer(28)]]) >>> A.is_positive_definite() True >>> [A[:i,:i].determinant() for i in range(Integer(1),A.nrows()+Integer(1))] [23, 576, 359540, 2842600]
# needs sage.rings.number_field x = polygen(ZZ, 'x') C.<I> = NumberField(x^2 + 1, embedding=CC(0,1)) A = matrix(C, [[ 23, 17*I + 3, 24*I + 25, 21*I], [ -17*I + 3, 38, -69*I + 89, 7*I + 15], [-24*I + 25, 69*I + 89, 976, 24*I + 6], [ -21*I, -7*I + 15, -24*I + 6, 28]]) A.is_positive_definite() [A[:i,:i].determinant() for i in range(1,A.nrows()+1)]An Hermitian matrix that is not positive-definite and a vector
uthat makes the corresponding quadratic form negative:sage: # needs sage.rings.number_field sage: C.<I> = QuadraticField(-1) sage: B = matrix(C, [[ 2, 4 - 2*I, 2 + 2*I], ....: [4 + 2*I, 8, 10*I], ....: [2 - 2*I, -10*I, -3]]) sage: B.is_positive_definite() False sage: u = vector(C, [-5 + 10*I, 4 - 3*I, 0]) sage: (B*u).hermitian_inner_product(u) -50
>>> from sage.all import * >>> # needs sage.rings.number_field >>> C = QuadraticField(-Integer(1), names=('I',)); (I,) = C._first_ngens(1) >>> B = matrix(C, [[ Integer(2), Integer(4) - Integer(2)*I, Integer(2) + Integer(2)*I], ... [Integer(4) + Integer(2)*I, Integer(8), Integer(10)*I], ... [Integer(2) - Integer(2)*I, -Integer(10)*I, -Integer(3)]]) >>> B.is_positive_definite() False >>> u = vector(C, [-Integer(5) + Integer(10)*I, Integer(4) - Integer(3)*I, Integer(0)]) >>> (B*u).hermitian_inner_product(u) -50
# needs sage.rings.number_field C.<I> = QuadraticField(-1) B = matrix(C, [[ 2, 4 - 2*I, 2 + 2*I], [4 + 2*I, 8, 10*I], [2 - 2*I, -10*I, -3]]) B.is_positive_definite() u = vector(C, [-5 + 10*I, 4 - 3*I, 0]) (B*u).hermitian_inner_product(u)A positive-definite matrix over an algebraically-closed field, confirmed by the positive determinants of its leading principal submatrices:
sage: # needs sage.rings.number_field sage: A = matrix(QQbar, [[ 2, 4 + 2*I, 6 - 4*I], ....: [ -2*I + 4, 11, 10 - 12*I], ....: [ 4*I + 6, 10 + 12*I, 37]]) sage: A.is_positive_definite() True sage: [A[:i,:i].determinant() for i in range(1, A.nrows() + 1)] [2, 2, 6]
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQbar, [[ Integer(2), Integer(4) + Integer(2)*I, Integer(6) - Integer(4)*I], ... [ -Integer(2)*I + Integer(4), Integer(11), Integer(10) - Integer(12)*I], ... [ Integer(4)*I + Integer(6), Integer(10) + Integer(12)*I, Integer(37)]]) >>> A.is_positive_definite() True >>> [A[:i,:i].determinant() for i in range(Integer(1), A.nrows() + Integer(1))] [2, 2, 6]
# needs sage.rings.number_field A = matrix(QQbar, [[ 2, 4 + 2*I, 6 - 4*I], [ -2*I + 4, 11, 10 - 12*I], [ 4*I + 6, 10 + 12*I, 37]]) A.is_positive_definite() [A[:i,:i].determinant() for i in range(1, A.nrows() + 1)]
- is_positive_operator_on(K1, K2=None)[source]¶
Determine if this matrix is a positive operator on a cone.
A matrix is a positive operator on a cone if the image of the cone under the matrix is itself a subset of the cone. That concept can be extended to two cones: a matrix is a positive operator on a pair of cones if the image of the first cone is contained in the second cone.
To reliably check whether or not this matrix is a positive operator, its base ring must be either exact (for example, the rationals) or the symbolic ring. An exact ring is more reliable, but in some cases a matrix whose entries contain symbolic constants like \(e\) and \(\pi\) will work. Performance is best for integer or rational matrices, for which we can check the “is a subset of the other cone” condition quickly.
INPUT:
K1– a polyhedral closed convex coneK2– (default:K1) the codomain cone; this matrix is a positive operator if the image ofK1is a subset ofK2
OUTPUT:
If the base ring of this matrix is exact, then
Truewill be returned if and only if this matrix is a positive operator.If the base ring of this matrix is symbolic, then the situation is more complicated:
Truewill be returned if it can be proven that this matrix is a positive operator.Falsewill be returned if it can be proven that this matrix is not a positive operator.Falsewill also be returned if we can’t decide; specifically if we arrive at a symbolic inequality that cannot be resolved.
REFERENCES:
A. Berman and P. Gaiha. A generalization of irreducible monotonicity. Linear Algebra and its Applications, 5:29-38, 1972.
A. Berman and R. J. Plemmons. Nonnegative Matrices in the Mathematical Sciences. SIAM, Philadelphia, 1994.
EXAMPLES:
Nonnegative matrices are positive operators on the nonnegative orthant:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = random_matrix(QQ, 3).apply_map(abs) sage: L.is_positive_operator_on(K) # needs sage.geometry.polyhedron True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = random_matrix(QQ, Integer(3)).apply_map(abs) >>> L.is_positive_operator_on(K) # needs sage.geometry.polyhedron True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = random_matrix(QQ, 3).apply_map(abs) L.is_positive_operator_on(K) # needs sage.geometry.polyhedron
Symbolic entries also work in some easy cases:
sage: K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron sage: L = matrix(SR, [ [0, e, 0 ], # needs sage.symbolic ....: [0, 2, pi], ....: [sqrt(2), 0, 0 ] ]) sage: L.is_positive_operator_on(K) # needs sage.geometry.polyhedron True
>>> from sage.all import * >>> K = Cone([(Integer(1),Integer(0),Integer(0)), (Integer(0),Integer(1),Integer(0)), (Integer(0),Integer(0),Integer(1))]) # needs sage.geometry.polyhedron >>> L = matrix(SR, [ [Integer(0), e, Integer(0) ], # needs sage.symbolic ... [Integer(0), Integer(2), pi], ... [sqrt(Integer(2)), Integer(0), Integer(0) ] ]) >>> L.is_positive_operator_on(K) # needs sage.geometry.polyhedron True
K = Cone([(1,0,0), (0,1,0), (0,0,1)]) # needs sage.geometry.polyhedron L = matrix(SR, [ [0, e, 0 ], # needs sage.symbolic [0, 2, pi], [sqrt(2), 0, 0 ] ]) L.is_positive_operator_on(K) # needs sage.geometry.polyhedronYour matrix can be over any exact ring, for example the ring of univariate polynomials with rational coefficients:
sage: # needs sage.geometry.polyhedron sage: K = Cone([(1,0), (-1,0), (0,1), (0,-1)]) sage: K.is_full_space() True sage: x = polygen(ZZ, 'x') sage: L = matrix(QQ[x], [[x,0],[0,1]]) sage: L.is_positive_operator_on(K) True
>>> from sage.all import * >>> # needs sage.geometry.polyhedron >>> K = Cone([(Integer(1),Integer(0)), (-Integer(1),Integer(0)), (Integer(0),Integer(1)), (Integer(0),-Integer(1))]) >>> K.is_full_space() True >>> x = polygen(ZZ, 'x') >>> L = matrix(QQ[x], [[x,Integer(0)],[Integer(0),Integer(1)]]) >>> L.is_positive_operator_on(K) True
# needs sage.geometry.polyhedron K = Cone([(1,0), (-1,0), (0,1), (0,-1)]) K.is_full_space() x = polygen(ZZ, 'x') L = matrix(QQ[x], [[x,0],[0,1]]) L.is_positive_operator_on(K)
- is_positive_semidefinite()[source]¶
Return whether or not this matrix is positive-semidefinite.
By SageMath convention, positive (semi)definite matrices must be either real symmetric or complex Hermitian.
ALGORITHM:
Bunch and Kaufman [BK1977] describe a fast, numerically-stable scheme for computing the “inertia” of a matrix by way Sylvester’s inertia theorem and a block-\(LDL^{T}\) factorization. We perform this factorization, and read off the signs of the eigenvalues from the resulting diagonal blocks.
REFERENCES:
See also
EXAMPLES:
A positive-definite matrix:
sage: A = matrix(QQ, [ [2,1], ....: [1,2] ] ) sage: A.eigenvalues() # needs sage.rings.number_field [3, 1] sage: A.is_positive_semidefinite() True
>>> from sage.all import * >>> A = matrix(QQ, [ [Integer(2),Integer(1)], ... [Integer(1),Integer(2)] ] ) >>> A.eigenvalues() # needs sage.rings.number_field [3, 1] >>> A.is_positive_semidefinite() True
A = matrix(QQ, [ [2,1], [1,2] ] ) A.eigenvalues() # needs sage.rings.number_field A.is_positive_semidefinite()A positive-semidefinite (but not positive-definite) matrix:
sage: A = matrix(QQ, [ [1,1], ....: [1,1] ] ) sage: A.eigenvalues() # needs sage.rings.number_field [2, 0] sage: A.is_positive_semidefinite() True
>>> from sage.all import * >>> A = matrix(QQ, [ [Integer(1),Integer(1)], ... [Integer(1),Integer(1)] ] ) >>> A.eigenvalues() # needs sage.rings.number_field [2, 0] >>> A.is_positive_semidefinite() True
A = matrix(QQ, [ [1,1], [1,1] ] ) A.eigenvalues() # needs sage.rings.number_field A.is_positive_semidefinite()And finally, an indefinite matrix:
sage: A = matrix(QQ, [ [0,1], ....: [1,0] ] ) sage: A.eigenvalues() # needs sage.rings.number_field [1, -1] sage: A.is_positive_semidefinite() False
>>> from sage.all import * >>> A = matrix(QQ, [ [Integer(0),Integer(1)], ... [Integer(1),Integer(0)] ] ) >>> A.eigenvalues() # needs sage.rings.number_field [1, -1] >>> A.is_positive_semidefinite() False
A = matrix(QQ, [ [0,1], [1,0] ] ) A.eigenvalues() # needs sage.rings.number_field A.is_positive_semidefinite()A non-Hermitian matrix cannot be positive-semidefinite, regardless of its eigenvalues:
sage: A = matrix(QQ, [ [2,1], ....: [0,0] ]) sage: A.eigenvalues() # needs sage.rings.number_field [2, 0] sage: A.is_positive_semidefinite() False
>>> from sage.all import * >>> A = matrix(QQ, [ [Integer(2),Integer(1)], ... [Integer(0),Integer(0)] ]) >>> A.eigenvalues() # needs sage.rings.number_field [2, 0] >>> A.is_positive_semidefinite() False
A = matrix(QQ, [ [2,1], [0,0] ]) A.eigenvalues() # needs sage.rings.number_field A.is_positive_semidefinite()Any of the preceding examples are valid over inexact rings and with complex numbers as well:
sage: # needs sage.rings.complex_double sage.symbolic sage: A = matrix(CDF, [ [ 2, I], ....: [-I, 2] ] ) sage: A.is_positive_semidefinite() True sage: A = matrix(CDF, [ [ 1, I], ....: [-I, 1] ] ) sage: A.is_positive_semidefinite() True sage: A = matrix(CDF, [ [0,I], ....: [I,0] ] ) sage: A.is_positive_semidefinite() False sage: A = matrix(CDF, [ [2,I], ....: [0,0] ]) sage: A.is_positive_semidefinite() False
>>> from sage.all import * >>> # needs sage.rings.complex_double sage.symbolic >>> A = matrix(CDF, [ [ Integer(2), I], ... [-I, Integer(2)] ] ) >>> A.is_positive_semidefinite() True >>> A = matrix(CDF, [ [ Integer(1), I], ... [-I, Integer(1)] ] ) >>> A.is_positive_semidefinite() True >>> A = matrix(CDF, [ [Integer(0),I], ... [I,Integer(0)] ] ) >>> A.is_positive_semidefinite() False >>> A = matrix(CDF, [ [Integer(2),I], ... [Integer(0),Integer(0)] ]) >>> A.is_positive_semidefinite() False
# needs sage.rings.complex_double sage.symbolic A = matrix(CDF, [ [ 2, I], [-I, 2] ] ) A.is_positive_semidefinite() A = matrix(CDF, [ [ 1, I], [-I, 1] ] ) A.is_positive_semidefinite() A = matrix(CDF, [ [0,I], [I,0] ] ) A.is_positive_semidefinite() A = matrix(CDF, [ [2,I], [0,0] ]) A.is_positive_semidefinite()
- is_scalar(a=None)[source]¶
Return
Trueif this matrix is a scalar matrix.INPUT:
a– base_ring element; chosen asself[0][0]ifa==None
OUTPUT:
Whether
selfis a scalar matrix (in fact the scalar matrix aI if a is input).EXAMPLES:
sage: m = matrix(QQ, 2,2, range(4)) sage: m.is_scalar(5) False sage: m = matrix(QQ, 2, [5,0,0,5]) sage: m.is_scalar(5) True sage: m = matrix(QQ, 2, [1,0,0,1]) sage: m.is_scalar(1) True sage: m = matrix(QQ, 2, [1,1,1,1]) sage: m.is_scalar(1) False
>>> from sage.all import * >>> m = matrix(QQ, Integer(2),Integer(2), range(Integer(4))) >>> m.is_scalar(Integer(5)) False >>> m = matrix(QQ, Integer(2), [Integer(5),Integer(0),Integer(0),Integer(5)]) >>> m.is_scalar(Integer(5)) True >>> m = matrix(QQ, Integer(2), [Integer(1),Integer(0),Integer(0),Integer(1)]) >>> m.is_scalar(Integer(1)) True >>> m = matrix(QQ, Integer(2), [Integer(1),Integer(1),Integer(1),Integer(1)]) >>> m.is_scalar(Integer(1)) False
m = matrix(QQ, 2,2, range(4)) m.is_scalar(5) m = matrix(QQ, 2, [5,0,0,5]) m.is_scalar(5) m = matrix(QQ, 2, [1,0,0,1]) m.is_scalar(1) m = matrix(QQ, 2, [1,1,1,1]) m.is_scalar(1)
- is_semisimple()[source]¶
Return if
selfis semisimple.A (square) matrix \(A\) is semisimple if the
minimal polynomialof \(A\) is sqaure-free.If \(A\) represents a linear map from \(F^n \to F^n\) for some field \(F\), then this is equivalent to every \(A\)-invariant subspace of \(F^n\) has a complementary \(A\)-invariant subspace. This is also equivalent to saying the matrix is diagonalizable over \(\bar{F}\), the algebraic closure of \(F\).
EXAMPLES:
sage: A = matrix([[0, -1], [1, 0]]); A [ 0 -1] [ 1 0] sage: A.is_semisimple() True sage: A.change_ring(QQ).is_diagonalizable() False sage: A.change_ring(CyclotomicField(4)).is_diagonalizable() True
>>> from sage.all import * >>> A = matrix([[Integer(0), -Integer(1)], [Integer(1), Integer(0)]]); A [ 0 -1] [ 1 0] >>> A.is_semisimple() True >>> A.change_ring(QQ).is_diagonalizable() False >>> A.change_ring(CyclotomicField(Integer(4))).is_diagonalizable() True
A = matrix([[0, -1], [1, 0]]); A A.is_semisimple() A.change_ring(QQ).is_diagonalizable() A.change_ring(CyclotomicField(4)).is_diagonalizable()
- is_similar(other, transformation=False)[source]¶
Return
Trueifselfandotherare similar, i.e. related by a change-of-basis matrix.INPUT:
other– a matrix, which should be square, and of the same size asselftransformation– (default:False) ifTrue, the output may include the change-of-basis matrix (also known as the similarity transformation). See below for an exact description.
OUTPUT:
Two matrices, \(A\) and \(B\) are similar if they are square matrices of the same size and there is an invertible matrix \(S\) such that \(A=S^{-1}BS\). \(S\) can be interpreted as a change-of-basis matrix if \(A\) and \(B\) are viewed as matrix representations of the same linear transformation from a vector space to itself.
When
transformation=Falsethis method will returnTrueif such a matrix \(S\) exists, otherwise it will returnFalse. Whentransformation=Truethe method returns a pair. The first part of the pair isTrueorFalsedepending on if the matrices are similar. The second part of the pair is the change-of-basis matrix when the matrices are similar andNonewhen the matrices are not similar.When a similarity transformation matrix
Sis requested, it will satisfyself = S.inverse()*other*S.rings and coefficients
Inexact rings are not supported. Only rings having a fraction field can be used as coefficients.
The base rings for the matrices are promoted to a common field for the similarity check using rational form over this field.
If the fraction fields of both matrices are the same, this field is used. Otherwise, if the fraction fields are only related by a canonical coercion, the common coercion field is used.
In all cases, the result is about similarity over a common field.
similarity transformation
For computation of the similarity transformation, the matrices are first checked to be similar over their common field.
In this case, a similarity transformation is then searched for over the common field. If this fails, the matrices are promoted to the algebraic closure of their common field (whenever it is available) and a similarity transformation is looked for over the algebraic closure.
For example, matrices over the rationals may be promoted to the field of algebraic numbers (
QQbar) for computation of the similarity transformation.Warning
When the two matrices are similar, this routine may fail to find the similarity transformation. A technical explanation follows.
The similarity check is accomplished with rational form, which will be successful for any pair of matrices over the same field. However, the computation of rational form does not provide a transformation. So we instead compute Jordan form, which does provide a transformation. But Jordan form will require that the eigenvalues of the matrix can be represented within Sage, requiring the existence of the appropriate extension field. When this is not possible, a
RuntimeErroris raised, as demonstrated in an example below.EXAMPLES:
The two matrices in this example were constructed to be similar. The computations happen in the field of algebraic numbers, but we are able to convert the change-of-basis matrix back to the rationals (which may not always be possible).
sage: A = matrix(ZZ, [[-5, 2, -11], ....: [-6, 7, -42], ....: [0, 1, -6]]) sage: B = matrix(ZZ, [[ 1, 12, 3], ....: [-1, -6, -1], ....: [ 0, 6, 1]]) sage: A.is_similar(B) True sage: # needs sage.combinat sage.libs.pari sage: _, T = A.is_similar(B, transformation=True) sage: T [ 1.00000000000000? + 0.?e-14*I 0.?e-14 + 0.?e-14*I 0.?e-14 + 0.?e-14*I] [-0.66666666666667? + 0.?e-15*I 0.166666666666667? + 0.?e-15*I -0.83333333333334? + 0.?e-14*I] [ 0.66666666666667? + 0.?e-14*I 0.?e-14 + 0.?e-14*I -0.33333333333333? + 0.?e-14*I] sage: T.change_ring(QQ) [ 1 0 0] [-2/3 1/6 -5/6] [ 2/3 0 -1/3] sage: A == T.inverse()*B*T True
>>> from sage.all import * >>> A = matrix(ZZ, [[-Integer(5), Integer(2), -Integer(11)], ... [-Integer(6), Integer(7), -Integer(42)], ... [Integer(0), Integer(1), -Integer(6)]]) >>> B = matrix(ZZ, [[ Integer(1), Integer(12), Integer(3)], ... [-Integer(1), -Integer(6), -Integer(1)], ... [ Integer(0), Integer(6), Integer(1)]]) >>> A.is_similar(B) True >>> # needs sage.combinat sage.libs.pari >>> _, T = A.is_similar(B, transformation=True) >>> T [ 1.00000000000000? + 0.?e-14*I 0.?e-14 + 0.?e-14*I 0.?e-14 + 0.?e-14*I] [-0.66666666666667? + 0.?e-15*I 0.166666666666667? + 0.?e-15*I -0.83333333333334? + 0.?e-14*I] [ 0.66666666666667? + 0.?e-14*I 0.?e-14 + 0.?e-14*I -0.33333333333333? + 0.?e-14*I] >>> T.change_ring(QQ) [ 1 0 0] [-2/3 1/6 -5/6] [ 2/3 0 -1/3] >>> A == T.inverse()*B*T True
A = matrix(ZZ, [[-5, 2, -11], [-6, 7, -42], [0, 1, -6]]) B = matrix(ZZ, [[ 1, 12, 3], [-1, -6, -1], [ 0, 6, 1]]) A.is_similar(B) # needs sage.combinat sage.libs.pari _, T = A.is_similar(B, transformation=True) T T.change_ring(QQ) A == T.inverse()*B*TOther exact fields are supported.
sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(7^2) sage: A = matrix(F, [[2*a + 5, 6*a + 6, a + 3], ....: [ a + 3, 2*a + 2, 4*a + 2], ....: [2*a + 6, 5*a + 5, 3*a]]) sage: B = matrix(F, [[5*a + 5, 6*a + 4, a + 1], ....: [ a + 5, 4*a + 3, 3*a + 3], ....: [3*a + 5, a + 4, 5*a + 6]]) sage: A.is_similar(B) True sage: B.is_similar(A) True sage: _, T = A.is_similar(B, transformation=True) sage: T [ 1 0 0] [6*a + 1 4*a + 3 4*a + 2] [6*a + 3 3*a + 5 3*a + 6] sage: A == T.inverse() * B * T True
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(7)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, [[Integer(2)*a + Integer(5), Integer(6)*a + Integer(6), a + Integer(3)], ... [ a + Integer(3), Integer(2)*a + Integer(2), Integer(4)*a + Integer(2)], ... [Integer(2)*a + Integer(6), Integer(5)*a + Integer(5), Integer(3)*a]]) >>> B = matrix(F, [[Integer(5)*a + Integer(5), Integer(6)*a + Integer(4), a + Integer(1)], ... [ a + Integer(5), Integer(4)*a + Integer(3), Integer(3)*a + Integer(3)], ... [Integer(3)*a + Integer(5), a + Integer(4), Integer(5)*a + Integer(6)]]) >>> A.is_similar(B) True >>> B.is_similar(A) True >>> _, T = A.is_similar(B, transformation=True) >>> T [ 1 0 0] [6*a + 1 4*a + 3 4*a + 2] [6*a + 3 3*a + 5 3*a + 6] >>> A == T.inverse() * B * T True
# needs sage.rings.finite_rings F.<a> = FiniteField(7^2) A = matrix(F, [[2*a + 5, 6*a + 6, a + 3], [ a + 3, 2*a + 2, 4*a + 2], [2*a + 6, 5*a + 5, 3*a]]) B = matrix(F, [[5*a + 5, 6*a + 4, a + 1], [ a + 5, 4*a + 3, 3*a + 3], [3*a + 5, a + 4, 5*a + 6]]) A.is_similar(B) B.is_similar(A) _, T = A.is_similar(B, transformation=True) T A == T.inverse() * B * TTwo matrices with different sets of eigenvalues, so they cannot possibly be similar.
sage: A = matrix(QQ, [[ 2, 3, -3, -6], ....: [ 0, 1, -2, -8], ....: [-3, -3, 4, 3], ....: [-1, -2, 2, 6]]) sage: B = matrix(QQ, [[ 1, 1, 2, 4], ....: [-1, 2, -3, -7], ....: [-2, 3, -4, -7], ....: [ 0, -1, 0, 0]]) sage: A.eigenvalues() == B.eigenvalues() # needs sage.rings.number_field False sage: A.is_similar(B, transformation=True) (False, None)
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(2), Integer(3), -Integer(3), -Integer(6)], ... [ Integer(0), Integer(1), -Integer(2), -Integer(8)], ... [-Integer(3), -Integer(3), Integer(4), Integer(3)], ... [-Integer(1), -Integer(2), Integer(2), Integer(6)]]) >>> B = matrix(QQ, [[ Integer(1), Integer(1), Integer(2), Integer(4)], ... [-Integer(1), Integer(2), -Integer(3), -Integer(7)], ... [-Integer(2), Integer(3), -Integer(4), -Integer(7)], ... [ Integer(0), -Integer(1), Integer(0), Integer(0)]]) >>> A.eigenvalues() == B.eigenvalues() # needs sage.rings.number_field False >>> A.is_similar(B, transformation=True) (False, None)
A = matrix(QQ, [[ 2, 3, -3, -6], [ 0, 1, -2, -8], [-3, -3, 4, 3], [-1, -2, 2, 6]]) B = matrix(QQ, [[ 1, 1, 2, 4], [-1, 2, -3, -7], [-2, 3, -4, -7], [ 0, -1, 0, 0]]) A.eigenvalues() == B.eigenvalues() # needs sage.rings.number_field A.is_similar(B, transformation=True)Similarity is an equivalence relation, so this routine computes a representative of the equivalence class for each matrix, the rational form, as provided by
rational_form(). The matrices below have identical eigenvalues (as evidenced by equal characteristic polynomials), but slightly different rational forms, and hence are not similar.sage: A = matrix(QQ, [[ 19, -7, -29], ....: [-16, 11, 30], ....: [ 15, -7, -25]]) sage: B = matrix(QQ, [[-38, -63, 42], ....: [ 14, 25, -14], ....: [-14, -21, 18]]) sage: A.charpoly() == B.charpoly() # needs sage.libs.pari True sage: A.rational_form() [ 0 0 -48] [ 1 0 8] [ 0 1 5] sage: B.rational_form() [ 4| 0 0] [--+-----] [ 0| 0 12] [ 0| 1 1] sage: A.is_similar(B) False
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(19), -Integer(7), -Integer(29)], ... [-Integer(16), Integer(11), Integer(30)], ... [ Integer(15), -Integer(7), -Integer(25)]]) >>> B = matrix(QQ, [[-Integer(38), -Integer(63), Integer(42)], ... [ Integer(14), Integer(25), -Integer(14)], ... [-Integer(14), -Integer(21), Integer(18)]]) >>> A.charpoly() == B.charpoly() # needs sage.libs.pari True >>> A.rational_form() [ 0 0 -48] [ 1 0 8] [ 0 1 5] >>> B.rational_form() [ 4| 0 0] [--+-----] [ 0| 0 12] [ 0| 1 1] >>> A.is_similar(B) False
A = matrix(QQ, [[ 19, -7, -29], [-16, 11, 30], [ 15, -7, -25]]) B = matrix(QQ, [[-38, -63, 42], [ 14, 25, -14], [-14, -21, 18]]) A.charpoly() == B.charpoly() # needs sage.libs.pari A.rational_form() B.rational_form() A.is_similar(B)Obtaining the transformation between two similar matrices requires the Jordan form, which requires computing the eigenvalues of the matrix, which may not lie in the field used for entries of the matrix. In this unfortunate case, the computation of the transformation may fail with a
RuntimeError, EVEN when the matrices are similar. This is not the case for matrices over the integers, rationals or algebraic numbers, since the computations are done in the algebraically closed field of algebraic numbers. Here is an example where the similarity is obvious by design, but we are not able to resurrect a similarity transformation.sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(7^2) sage: C = matrix(F, [[ a + 2, 5*a + 4], ....: [6*a + 6, 6*a + 4]]) sage: S = matrix(F, [[0, 1], ....: [1, 0]]) sage: D = S.inverse()*C*S sage: C.is_similar(D) True sage: C.is_similar(D, transformation=True) # needs sage.combinat Traceback (most recent call last): ... RuntimeError: unable to compute transformation for similar matrices sage: C.jordan_form() # needs sage.combinat Traceback (most recent call last): ... RuntimeError: Some eigenvalue does not exist in Finite Field in a of size 7^2.
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(7)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> C = matrix(F, [[ a + Integer(2), Integer(5)*a + Integer(4)], ... [Integer(6)*a + Integer(6), Integer(6)*a + Integer(4)]]) >>> S = matrix(F, [[Integer(0), Integer(1)], ... [Integer(1), Integer(0)]]) >>> D = S.inverse()*C*S >>> C.is_similar(D) True >>> C.is_similar(D, transformation=True) # needs sage.combinat Traceback (most recent call last): ... RuntimeError: unable to compute transformation for similar matrices >>> C.jordan_form() # needs sage.combinat Traceback (most recent call last): ... RuntimeError: Some eigenvalue does not exist in Finite Field in a of size 7^2.
# needs sage.rings.finite_rings F.<a> = FiniteField(7^2) C = matrix(F, [[ a + 2, 5*a + 4], [6*a + 6, 6*a + 4]]) S = matrix(F, [[0, 1], [1, 0]]) D = S.inverse()*C*S C.is_similar(D) C.is_similar(D, transformation=True) # needs sage.combinat C.jordan_form() # needs sage.combinatAn example over a finite field of prime order, which uses the algebraic closure of this field to find the change-of-basis matrix:
sage: # needs sage.combinat sage.graphs sage.rings.finite_rings sage: cox = posets.TamariLattice(3).coxeter_transformation() sage: M = cox.change_ring(GF(3)) sage: M.is_similar(M**3, True) # long time ( [1 0 0 0 0] [0 1 1 0 2] [0 0 0 0 1] [1 2 0 2 1] True, [0 0 1 0 0] )
>>> from sage.all import * >>> # needs sage.combinat sage.graphs sage.rings.finite_rings >>> cox = posets.TamariLattice(Integer(3)).coxeter_transformation() >>> M = cox.change_ring(GF(Integer(3))) >>> M.is_similar(M**Integer(3), True) # long time ( [1 0 0 0 0] [0 1 1 0 2] [0 0 0 0 1] [1 2 0 2 1] True, [0 0 1 0 0] )
# needs sage.combinat sage.graphs sage.rings.finite_rings cox = posets.TamariLattice(3).coxeter_transformation() M = cox.change_ring(GF(3)) M.is_similar(M**3, True) # long time
Inexact rings and fields are not supported.
sage: A = matrix(CDF, 2, 2, range(4)) sage: B = copy(A) sage: A.is_similar(B) Traceback (most recent call last): ... TypeError: matrix entries must come from an exact field, not Complex Double Field
>>> from sage.all import * >>> A = matrix(CDF, Integer(2), Integer(2), range(Integer(4))) >>> B = copy(A) >>> A.is_similar(B) Traceback (most recent call last): ... TypeError: matrix entries must come from an exact field, not Complex Double Field
A = matrix(CDF, 2, 2, range(4)) B = copy(A) A.is_similar(B)
Base rings for the matrices need to have a fraction field. So in particular, the ring needs to be at least an integral domain.
sage: Z6 = Integers(6) sage: A = matrix(Z6, 2, 2, range(4)) sage: A.is_similar(A) Traceback (most recent call last): ... ValueError: base ring of a matrix needs a fraction field, maybe the ring is not an integral domain
>>> from sage.all import * >>> Z6 = Integers(Integer(6)) >>> A = matrix(Z6, Integer(2), Integer(2), range(Integer(4))) >>> A.is_similar(A) Traceback (most recent call last): ... ValueError: base ring of a matrix needs a fraction field, maybe the ring is not an integral domain
Z6 = Integers(6) A = matrix(Z6, 2, 2, range(4)) A.is_similar(A)
If the fraction fields of the entries are unequal and do not coerce in a common field, it is an error.
sage: A = matrix(GF(3), 2, 2, range(4)) sage: B = matrix(GF(2), 2, 2, range(4)) sage: A.is_similar(B, transformation=True) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 3' and 'Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 2'
>>> from sage.all import * >>> A = matrix(GF(Integer(3)), Integer(2), Integer(2), range(Integer(4))) >>> B = matrix(GF(Integer(2)), Integer(2), Integer(2), range(Integer(4))) >>> A.is_similar(B, transformation=True) Traceback (most recent call last): ... TypeError: no common canonical parent for objects with parents: 'Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 3' and 'Full MatrixSpace of 2 by 2 dense matrices over Finite Field of size 2'
A = matrix(GF(3), 2, 2, range(4)) B = matrix(GF(2), 2, 2, range(4)) A.is_similar(B, transformation=True)
A matrix over the integers and a matrix over the algebraic numbers will be compared over the algebraic numbers (by coercion of
QQinQQbar).sage: A = matrix(ZZ, 2, 2, range(4)) sage: B = matrix(QQbar, 2, 2, range(4)) # needs sage.rings.number_field sage: A.is_similar(B) # needs sage.rings.number_field True
>>> from sage.all import * >>> A = matrix(ZZ, Integer(2), Integer(2), range(Integer(4))) >>> B = matrix(QQbar, Integer(2), Integer(2), range(Integer(4))) # needs sage.rings.number_field >>> A.is_similar(B) # needs sage.rings.number_field True
A = matrix(ZZ, 2, 2, range(4)) B = matrix(QQbar, 2, 2, range(4)) # needs sage.rings.number_field A.is_similar(B) # needs sage.rings.number_field
- is_triangular(side='lower')[source]¶
Return
Trueif this matrix is a triangular matrix.INPUT:
side– either'lower'(default) or'upper'
OUTPUT: boolean
EXAMPLES:
sage: m = matrix(QQ, 2, 2, range(4)) sage: m.is_triangular() False sage: m = matrix(QQ, 2, [5, 0, 0, 5]) sage: m.is_triangular() True sage: m = matrix(QQ, 2, [1, 2, 0, 1]) sage: m.is_triangular("upper") True sage: m.is_triangular("lower") False
>>> from sage.all import * >>> m = matrix(QQ, Integer(2), Integer(2), range(Integer(4))) >>> m.is_triangular() False >>> m = matrix(QQ, Integer(2), [Integer(5), Integer(0), Integer(0), Integer(5)]) >>> m.is_triangular() True >>> m = matrix(QQ, Integer(2), [Integer(1), Integer(2), Integer(0), Integer(1)]) >>> m.is_triangular("upper") True >>> m.is_triangular("lower") False
m = matrix(QQ, 2, 2, range(4)) m.is_triangular() m = matrix(QQ, 2, [5, 0, 0, 5]) m.is_triangular() m = matrix(QQ, 2, [1, 2, 0, 1]) m.is_triangular("upper") m.is_triangular("lower")
- is_unitary()[source]¶
Return
Trueif the columns of the matrix are an orthonormal basis.For a matrix with real entries this determines if a matrix is “orthogonal” and for a matrix with complex entries this determines if the matrix is “unitary.”
OUTPUT:
Trueif the matrix is square and its conjugate-transpose is its inverse, andFalseotherwise. In other words, a matrix is orthogonal or unitary if the product of its conjugate-transpose times the matrix is the identity matrix.For numerical matrices a specialized routine available over
RDFandCDFis a good choice.EXAMPLES:
sage: A = matrix(QQbar, # needs sage.rings.number_field sage.symbolic ....: [[(1/sqrt(5))*(1+i), (1/sqrt(55))*(3+2*I), (1/sqrt(22))*(2+2*I)], ....: [(1/sqrt(5))*(1-i), (1/sqrt(55))*(2+2*I), (1/sqrt(22))*(-3+I)], ....: [ (1/sqrt(5))*I, (1/sqrt(55))*(3-5*I), (1/sqrt(22))*(-2)]]) sage: A.is_unitary() # needs sage.rings.number_field sage.symbolic True
>>> from sage.all import * >>> A = matrix(QQbar, # needs sage.rings.number_field sage.symbolic ... [[(Integer(1)/sqrt(Integer(5)))*(Integer(1)+i), (Integer(1)/sqrt(Integer(55)))*(Integer(3)+Integer(2)*I), (Integer(1)/sqrt(Integer(22)))*(Integer(2)+Integer(2)*I)], ... [(Integer(1)/sqrt(Integer(5)))*(Integer(1)-i), (Integer(1)/sqrt(Integer(55)))*(Integer(2)+Integer(2)*I), (Integer(1)/sqrt(Integer(22)))*(-Integer(3)+I)], ... [ (Integer(1)/sqrt(Integer(5)))*I, (Integer(1)/sqrt(Integer(55)))*(Integer(3)-Integer(5)*I), (Integer(1)/sqrt(Integer(22)))*(-Integer(2))]]) >>> A.is_unitary() # needs sage.rings.number_field sage.symbolic True
A = matrix(QQbar, # needs sage.rings.number_field sage.symbolic [[(1/sqrt(5))*(1+i), (1/sqrt(55))*(3+2*I), (1/sqrt(22))*(2+2*I)], [(1/sqrt(5))*(1-i), (1/sqrt(55))*(2+2*I), (1/sqrt(22))*(-3+I)], [ (1/sqrt(5))*I, (1/sqrt(55))*(3-5*I), (1/sqrt(22))*(-2)]]) A.is_unitary() # needs sage.rings.number_field sage.symbolicA permutation matrix is always orthogonal.
sage: # needs sage.combinat sage: sigma = Permutation([1,3,4,5,2]) sage: P = sigma.to_matrix(); P [1 0 0 0 0] [0 0 0 0 1] [0 1 0 0 0] [0 0 1 0 0] [0 0 0 1 0] sage: P.is_unitary() True sage: P.change_ring(GF(3)).is_unitary() True sage: P.change_ring(GF(3)).is_unitary() True
>>> from sage.all import * >>> # needs sage.combinat >>> sigma = Permutation([Integer(1),Integer(3),Integer(4),Integer(5),Integer(2)]) >>> P = sigma.to_matrix(); P [1 0 0 0 0] [0 0 0 0 1] [0 1 0 0 0] [0 0 1 0 0] [0 0 0 1 0] >>> P.is_unitary() True >>> P.change_ring(GF(Integer(3))).is_unitary() True >>> P.change_ring(GF(Integer(3))).is_unitary() True
# needs sage.combinat sigma = Permutation([1,3,4,5,2]) P = sigma.to_matrix(); P P.is_unitary() P.change_ring(GF(3)).is_unitary() P.change_ring(GF(3)).is_unitary()
A square matrix far from unitary.
sage: A = matrix(QQ, 4, range(16)) sage: A.is_unitary() False
>>> from sage.all import * >>> A = matrix(QQ, Integer(4), range(Integer(16))) >>> A.is_unitary() False
A = matrix(QQ, 4, range(16)) A.is_unitary()
Rectangular matrices are never unitary.
sage: A = matrix(QQbar, 3, 4) # needs sage.rings.number_field sage: A.is_unitary() False
>>> from sage.all import * >>> A = matrix(QQbar, Integer(3), Integer(4)) # needs sage.rings.number_field >>> A.is_unitary() False
A = matrix(QQbar, 3, 4) # needs sage.rings.number_field A.is_unitary()
- jordan_decomposition()[source]¶
Return the Jordan decomposition of
self.The Jordan decomposition of a matrix \(A\) is a pair of matrices \((S, N)\) such that
\(A = S + N\),
\(S\) is semisimple,
\(N\) is nilpotent.
EXAMPLES:
sage: A = matrix(QQ, 5, 5, {(0,1): -1, (1,0): 1, (2,3): -1}); A [ 0 -1 0 0 0] [ 1 0 0 0 0] [ 0 0 0 -1 0] [ 0 0 0 0 0] [ 0 0 0 0 0] sage: S, N = A.jordan_decomposition() sage: S [ 0 -1 0 0 0] [ 1 0 0 0 0] [ 0 0 0 0 0] [ 0 0 0 0 0] [ 0 0 0 0 0] sage: N [ 0 0 0 0 0] [ 0 0 0 0 0] [ 0 0 0 -1 0] [ 0 0 0 0 0] [ 0 0 0 0 0] sage: A == S + N True sage: S.is_semisimple() True sage: N.is_nilpotent() True sage: A.jordan_form() Traceback (most recent call last): ... RuntimeError: Some eigenvalue does not exist in Rational Field.
>>> from sage.all import * >>> A = matrix(QQ, Integer(5), Integer(5), {(Integer(0),Integer(1)): -Integer(1), (Integer(1),Integer(0)): Integer(1), (Integer(2),Integer(3)): -Integer(1)}); A [ 0 -1 0 0 0] [ 1 0 0 0 0] [ 0 0 0 -1 0] [ 0 0 0 0 0] [ 0 0 0 0 0] >>> S, N = A.jordan_decomposition() >>> S [ 0 -1 0 0 0] [ 1 0 0 0 0] [ 0 0 0 0 0] [ 0 0 0 0 0] [ 0 0 0 0 0] >>> N [ 0 0 0 0 0] [ 0 0 0 0 0] [ 0 0 0 -1 0] [ 0 0 0 0 0] [ 0 0 0 0 0] >>> A == S + N True >>> S.is_semisimple() True >>> N.is_nilpotent() True >>> A.jordan_form() Traceback (most recent call last): ... RuntimeError: Some eigenvalue does not exist in Rational Field.
A = matrix(QQ, 5, 5, {(0,1): -1, (1,0): 1, (2,3): -1}); A S, N = A.jordan_decomposition() S N A == S + N S.is_semisimple() N.is_nilpotent() A.jordan_form()
- jordan_form(base_ring=None, sparse=False, subdivide=True, transformation=False, eigenvalues=None, check_input=True)[source]¶
Compute the Jordan normal form of this square matrix \(A\), if it exists.
This computation is performed in a naive way using the ranks of powers of \(A-xI\), where \(x\) is an eigenvalue of the matrix \(A\). If desired, a transformation matrix \(P\) can be returned, which is such that the Jordan canonical form is given by \(P^{-1} A P\); if the matrix is diagonalizable, this equals to eigendecomposition or spectral decomposition.
INPUT:
base_ring– ring in which to compute the Jordan formsparse– (default:False) ifsparse=True, return a sparse matrixsubdivide– (default:True) ifsubdivide=True, the subdivisions for the Jordan blocks in the matrix are showntransformation– (default:False) iftransformation=True, computes also the transformation matrixeigenvalues– (default:None) a complete set of roots, with multiplicity, of the characteristic polynomial of \(A\), encoded as a list of pairs, each having the form \((r, m)\) with \(r\) a root and \(m\) its multiplicity. If this isNone, then Sage computes this list itself, but this is only possible over base rings in whose quotient fields polynomial factorization is implemented. Over all other rings, providing this list manually is the only way to compute Jordan normal forms.check_input– boolean (default:True); whether the listeigenvalues(if provided) has to be checked for correctness. Set this toFalsefor a speedup if the eigenvalues are known to be correct.
Note
Currently, the Jordan normal form is not computed over inexact rings in any but the trivial cases when the matrix is either \(0 \times 0\) or \(1 \times 1\).
In the case of exact rings, this method does not compute any generalized form of the Jordan normal form, but is only able to compute the result if the characteristic polynomial of the matrix splits over the specific base ring.
Note that the base ring must be a field or a ring with an implemented fraction field.
EXAMPLES:
sage: # needs sage.combinat sage.libs.pari sage: a = matrix(ZZ,4,[1, 0, 0, 0, 0, 1, 0, 0, ....: 1, -1, 1, 0, 1, -1, 1, 2]); a [ 1 0 0 0] [ 0 1 0 0] [ 1 -1 1 0] [ 1 -1 1 2] sage: a.jordan_form() [2|0 0|0] [-+---+-] [0|1 1|0] [0|0 1|0] [-+---+-] [0|0 0|1] sage: a.jordan_form(subdivide=False) [2 0 0 0] [0 1 1 0] [0 0 1 0] [0 0 0 1] sage: b = matrix(ZZ,3,3,range(9)); b [0 1 2] [3 4 5] [6 7 8] sage: b.jordan_form() Traceback (most recent call last): ... RuntimeError: Some eigenvalue does not exist in Rational Field. sage: b.jordan_form(RealField(15)) Traceback (most recent call last): ... ValueError: Jordan normal form not implemented over inexact rings.
>>> from sage.all import * >>> # needs sage.combinat sage.libs.pari >>> a = matrix(ZZ,Integer(4),[Integer(1), Integer(0), Integer(0), Integer(0), Integer(0), Integer(1), Integer(0), Integer(0), ... Integer(1), -Integer(1), Integer(1), Integer(0), Integer(1), -Integer(1), Integer(1), Integer(2)]); a [ 1 0 0 0] [ 0 1 0 0] [ 1 -1 1 0] [ 1 -1 1 2] >>> a.jordan_form() [2|0 0|0] [-+---+-] [0|1 1|0] [0|0 1|0] [-+---+-] [0|0 0|1] >>> a.jordan_form(subdivide=False) [2 0 0 0] [0 1 1 0] [0 0 1 0] [0 0 0 1] >>> b = matrix(ZZ,Integer(3),Integer(3),range(Integer(9))); b [0 1 2] [3 4 5] [6 7 8] >>> b.jordan_form() Traceback (most recent call last): ... RuntimeError: Some eigenvalue does not exist in Rational Field. >>> b.jordan_form(RealField(Integer(15))) Traceback (most recent call last): ... ValueError: Jordan normal form not implemented over inexact rings.
# needs sage.combinat sage.libs.pari a = matrix(ZZ,4,[1, 0, 0, 0, 0, 1, 0, 0, 1, -1, 1, 0, 1, -1, 1, 2]); a a.jordan_form() a.jordan_form(subdivide=False) b = matrix(ZZ,3,3,range(9)); b b.jordan_form() b.jordan_form(RealField(15))Here we need to specify a field, since the eigenvalues are not defined in the smallest ring containing the matrix entries (Issue #14508):
sage: c = matrix([[0,1,0], [0,0,1], [1,0,0]]) sage: c.jordan_form(CyclotomicField(3)) # needs sage.combinat sage.rings.number_field [ 1| 0| 0] [----------+----------+----------] [ 0| zeta3| 0] [----------+----------+----------] [ 0| 0|-zeta3 - 1]
>>> from sage.all import * >>> c = matrix([[Integer(0),Integer(1),Integer(0)], [Integer(0),Integer(0),Integer(1)], [Integer(1),Integer(0),Integer(0)]]) >>> c.jordan_form(CyclotomicField(Integer(3))) # needs sage.combinat sage.rings.number_field [ 1| 0| 0] [----------+----------+----------] [ 0| zeta3| 0] [----------+----------+----------] [ 0| 0|-zeta3 - 1]
c = matrix([[0,1,0], [0,0,1], [1,0,0]]) c.jordan_form(CyclotomicField(3)) # needs sage.combinat sage.rings.number_field
If you need the transformation matrix as well as the Jordan form of
self, then pass the optiontransformation=True. For example:sage: # needs sage.combinat sage.libs.pari sage: m = matrix([[5,4,2,1], [0,1,-1,-1], [-1,-1,3,0], [1,1,-1,2]]); m [ 5 4 2 1] [ 0 1 -1 -1] [-1 -1 3 0] [ 1 1 -1 2] sage: jf, p = m.jordan_form(transformation=True) sage: jf [2|0|0 0] [-+-+---] [0|1|0 0] [-+-+---] [0|0|4 1] [0|0|0 4] sage: ~p * m * p [2 0 0 0] [0 1 0 0] [0 0 4 1] [0 0 0 4]
>>> from sage.all import * >>> # needs sage.combinat sage.libs.pari >>> m = matrix([[Integer(5),Integer(4),Integer(2),Integer(1)], [Integer(0),Integer(1),-Integer(1),-Integer(1)], [-Integer(1),-Integer(1),Integer(3),Integer(0)], [Integer(1),Integer(1),-Integer(1),Integer(2)]]); m [ 5 4 2 1] [ 0 1 -1 -1] [-1 -1 3 0] [ 1 1 -1 2] >>> jf, p = m.jordan_form(transformation=True) >>> jf [2|0|0 0] [-+-+---] [0|1|0 0] [-+-+---] [0|0|4 1] [0|0|0 4] >>> ~p * m * p [2 0 0 0] [0 1 0 0] [0 0 4 1] [0 0 0 4]
# needs sage.combinat sage.libs.pari m = matrix([[5,4,2,1], [0,1,-1,-1], [-1,-1,3,0], [1,1,-1,2]]); m jf, p = m.jordan_form(transformation=True) jf ~p * m * p
Note that for matrices over inexact rings, we do not attempt to compute the Jordan normal form, since it is not numerically stable:
sage: b = matrix(ZZ, 3, 3, range(9)) sage: jf, p = b.jordan_form(RealField(15), transformation=True) # needs sage.combinat Traceback (most recent call last): ... ValueError: Jordan normal form not implemented over inexact rings.
>>> from sage.all import * >>> b = matrix(ZZ, Integer(3), Integer(3), range(Integer(9))) >>> jf, p = b.jordan_form(RealField(Integer(15)), transformation=True) # needs sage.combinat Traceback (most recent call last): ... ValueError: Jordan normal form not implemented over inexact rings.
b = matrix(ZZ, 3, 3, range(9)) jf, p = b.jordan_form(RealField(15), transformation=True) # needs sage.combinat
- kernel(*args, **kwds)[source]¶
Return the left kernel of this matrix, as a vector space or free module.
This is the set of vectors
xsuch thatx*self = 0.Note
For the right kernel, use
right_kernel(). The methodkernel()is exactly equal toleft_kernel().For inexact rings use
right_kernel_matrix()withbasis='computed'(on the transpose of the matrix) to avoid echelonizing.INPUT:
algorithm– (default:'default') a keyword that selects the algorithm employed. Allowable values are:'default'– allows the algorithm to be chosen automatically'generic'– naive algorithm usable for matrices over any field'flint'– FLINT library code for matrices over the rationals or the integers'pari'– PARI library code for matrices over number fields or the integers'padic'– padic algorithm from IML library for matrices over the rationals and integers'pluq'– PLUQ matrix factorization for matrices mod 2
basis– (default:'echelon') a keyword that describes the format of the basis used to construct the left kernel. Allowable values are:‘echelon’: the basis matrix is returned in echelon form
‘pivot’ : each basis vector is computed from the reduced row-echelon form of
selfby placing a single one in a non-pivot column and zeros in the remaining non-pivot columns. Only available for matrices over fields.‘LLL’: an LLL-reduced basis. Only available for matrices over the integers.
OUTPUT:
A vector space or free module whose degree equals the number of rows in
selfand which contains all the vectorsxsuch thatx*self = 0.If
selfhas 0 rows, the kernel has dimension 0, while ifselfhas 0 columns the kernel is the entire ambient vector space.The result is cached. Requesting the left kernel a second time, but with a different basis format, will return the cached result with the format from the first computation.
Note
For much more detailed documentation of the various options see
right_kernel(), since this method just computes the right kernel of the transpose ofself.EXAMPLES:
Over the rationals with a basis matrix in echelon form.
sage: A = matrix(QQ, [[1, 2, 4, -7, 4], ....: [1, 1, 0, 2, -1], ....: [1, 0, 3, -3, 1], ....: [0, -1, -1, 3, -2], ....: [0, 0, -1, 2, -1]]) sage: A.left_kernel() Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1 2 -1] [ 0 1 -1 1 -4]
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), Integer(2), Integer(4), -Integer(7), Integer(4)], ... [Integer(1), Integer(1), Integer(0), Integer(2), -Integer(1)], ... [Integer(1), Integer(0), Integer(3), -Integer(3), Integer(1)], ... [Integer(0), -Integer(1), -Integer(1), Integer(3), -Integer(2)], ... [Integer(0), Integer(0), -Integer(1), Integer(2), -Integer(1)]]) >>> A.left_kernel() Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1 2 -1] [ 0 1 -1 1 -4]
A = matrix(QQ, [[1, 2, 4, -7, 4], [1, 1, 0, 2, -1], [1, 0, 3, -3, 1], [0, -1, -1, 3, -2], [0, 0, -1, 2, -1]]) A.left_kernel()Over a finite field, with a basis matrix in “pivot” format.
sage: A = matrix(FiniteField(7), [[5, 0, 5, 2, 4], ....: [1, 3, 2, 3, 6], ....: [1, 1, 6, 5, 3], ....: [2, 5, 6, 0, 0]]) sage: A.kernel(basis='pivot') Vector space of degree 4 and dimension 2 over Finite Field of size 7 User basis matrix: [5 2 1 0] [6 3 0 1]
>>> from sage.all import * >>> A = matrix(FiniteField(Integer(7)), [[Integer(5), Integer(0), Integer(5), Integer(2), Integer(4)], ... [Integer(1), Integer(3), Integer(2), Integer(3), Integer(6)], ... [Integer(1), Integer(1), Integer(6), Integer(5), Integer(3)], ... [Integer(2), Integer(5), Integer(6), Integer(0), Integer(0)]]) >>> A.kernel(basis='pivot') Vector space of degree 4 and dimension 2 over Finite Field of size 7 User basis matrix: [5 2 1 0] [6 3 0 1]
A = matrix(FiniteField(7), [[5, 0, 5, 2, 4], [1, 3, 2, 3, 6], [1, 1, 6, 5, 3], [2, 5, 6, 0, 0]]) A.kernel(basis='pivot')The left kernel of a zero matrix is the entire ambient vector space whose degree equals the number of rows of
self(i.e. everything).sage: A = MatrixSpace(QQ, 3, 4)(0) sage: A.kernel() Vector space of degree 3 and dimension 3 over Rational Field Basis matrix: [1 0 0] [0 1 0] [0 0 1]
>>> from sage.all import * >>> A = MatrixSpace(QQ, Integer(3), Integer(4))(Integer(0)) >>> A.kernel() Vector space of degree 3 and dimension 3 over Rational Field Basis matrix: [1 0 0] [0 1 0] [0 0 1]
A = MatrixSpace(QQ, 3, 4)(0) A.kernel()
We test matrices with no rows or columns.
sage: A = matrix(QQ, 2, 0) sage: A.left_kernel() Vector space of degree 2 and dimension 2 over Rational Field Basis matrix: [1 0] [0 1] sage: A = matrix(QQ, 0, 2) sage: A.left_kernel() Vector space of degree 0 and dimension 0 over Rational Field Basis matrix: []
>>> from sage.all import * >>> A = matrix(QQ, Integer(2), Integer(0)) >>> A.left_kernel() Vector space of degree 2 and dimension 2 over Rational Field Basis matrix: [1 0] [0 1] >>> A = matrix(QQ, Integer(0), Integer(2)) >>> A.left_kernel() Vector space of degree 0 and dimension 0 over Rational Field Basis matrix: []
A = matrix(QQ, 2, 0) A.left_kernel() A = matrix(QQ, 0, 2) A.left_kernel()
The results are cached. Note that requesting a new format for the basis is ignored and the cached copy is returned. Work with a copy if you need a new left kernel, or perhaps investigate the
right_kernel_matrix()method on the transpose, which does not cache its results and is more flexible.sage: A = matrix(QQ, [[1,1],[2,2]]) sage: K1 = A.left_kernel() sage: K1 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] sage: K2 = A.left_kernel() sage: K1 is K2 True sage: K3 = A.left_kernel(basis='pivot') sage: K3 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] sage: B = copy(A) sage: K3 = B.left_kernel(basis='pivot') sage: K3 Vector space of degree 2 and dimension 1 over Rational Field User basis matrix: [-2 1] sage: K3 is K1 False sage: K3 == K1 True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1),Integer(1)],[Integer(2),Integer(2)]]) >>> K1 = A.left_kernel() >>> K1 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] >>> K2 = A.left_kernel() >>> K1 is K2 True >>> K3 = A.left_kernel(basis='pivot') >>> K3 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] >>> B = copy(A) >>> K3 = B.left_kernel(basis='pivot') >>> K3 Vector space of degree 2 and dimension 1 over Rational Field User basis matrix: [-2 1] >>> K3 is K1 False >>> K3 == K1 True
A = matrix(QQ, [[1,1],[2,2]]) K1 = A.left_kernel() K1 K2 = A.left_kernel() K1 is K2 K3 = A.left_kernel(basis='pivot') K3 B = copy(A) K3 = B.left_kernel(basis='pivot') K3 K3 is K1 K3 == K1
- kernel_on(V, poly=None, check=True)[source]¶
Return the kernel of
selfrestricted to the invariant subspace \(V\). The result is a vector subspace of \(V\), which is also a subspace of the ambient space.INPUT:
V– vector subspacecheck– boolean (default:True); whether to check that \(V\) is invariant under the action ofselfpoly– (default:None) if notNone, compute instead the kernel ofpoly(self)on \(V\)
OUTPUT: a subspace
Warning
This function does not check that \(V\) is in fact invariant under
selfif check isFalse. With checkFalsethis function is much faster.EXAMPLES:
sage: t = matrix(QQ, 4, [39, -10, 0, -12, 0, 2, 0, -1, 0, 1, -2, 0, 0, 2, 0, -2]); t [ 39 -10 0 -12] [ 0 2 0 -1] [ 0 1 -2 0] [ 0 2 0 -2] sage: t.fcp() # needs sage.libs.pari (x - 39) * (x + 2) * (x^2 - 2) sage: s = (t-39)*(t^2-2) sage: V = s.kernel(); V Vector space of degree 4 and dimension 3 over Rational Field Basis matrix: [1 0 0 0] [0 1 0 0] [0 0 0 1] sage: s.restrict(V) [0 0 0] [0 0 0] [0 0 0] sage: s.kernel_on(V) Vector space of degree 4 and dimension 3 over Rational Field Basis matrix: [1 0 0 0] [0 1 0 0] [0 0 0 1] sage: k = t-39 sage: k.restrict(V) [ 0 -10 -12] [ 0 -37 -1] [ 0 2 -41] sage: ker = k.kernel_on(V); ker Vector space of degree 4 and dimension 1 over Rational Field Basis matrix: [ 1 -2/7 0 -2/7] sage: ker.0 * k (0, 0, 0, 0)
>>> from sage.all import * >>> t = matrix(QQ, Integer(4), [Integer(39), -Integer(10), Integer(0), -Integer(12), Integer(0), Integer(2), Integer(0), -Integer(1), Integer(0), Integer(1), -Integer(2), Integer(0), Integer(0), Integer(2), Integer(0), -Integer(2)]); t [ 39 -10 0 -12] [ 0 2 0 -1] [ 0 1 -2 0] [ 0 2 0 -2] >>> t.fcp() # needs sage.libs.pari (x - 39) * (x + 2) * (x^2 - 2) >>> s = (t-Integer(39))*(t**Integer(2)-Integer(2)) >>> V = s.kernel(); V Vector space of degree 4 and dimension 3 over Rational Field Basis matrix: [1 0 0 0] [0 1 0 0] [0 0 0 1] >>> s.restrict(V) [0 0 0] [0 0 0] [0 0 0] >>> s.kernel_on(V) Vector space of degree 4 and dimension 3 over Rational Field Basis matrix: [1 0 0 0] [0 1 0 0] [0 0 0 1] >>> k = t-Integer(39) >>> k.restrict(V) [ 0 -10 -12] [ 0 -37 -1] [ 0 2 -41] >>> ker = k.kernel_on(V); ker Vector space of degree 4 and dimension 1 over Rational Field Basis matrix: [ 1 -2/7 0 -2/7] >>> ker.gen(0) * k (0, 0, 0, 0)
t = matrix(QQ, 4, [39, -10, 0, -12, 0, 2, 0, -1, 0, 1, -2, 0, 0, 2, 0, -2]); t t.fcp() # needs sage.libs.pari s = (t-39)*(t^2-2) V = s.kernel(); V s.restrict(V) s.kernel_on(V) k = t-39 k.restrict(V) ker = k.kernel_on(V); ker ker.0 * k
Test that Issue #9425 is fixed.
sage: V = span([[1/7,0,0] ,[0,1,0]], ZZ); V Free module of degree 3 and rank 2 over Integer Ring Echelon basis matrix: [1/7 0 0] [ 0 1 0] sage: T = matrix(ZZ,3,[1,0,0,0,0,0,0,0,0]); T [1 0 0] [0 0 0] [0 0 0] sage: W = T.kernel_on(V); W.basis() [ (0, 1, 0) ] sage: W.is_submodule(V) True
>>> from sage.all import * >>> V = span([[Integer(1)/Integer(7),Integer(0),Integer(0)] ,[Integer(0),Integer(1),Integer(0)]], ZZ); V Free module of degree 3 and rank 2 over Integer Ring Echelon basis matrix: [1/7 0 0] [ 0 1 0] >>> T = matrix(ZZ,Integer(3),[Integer(1),Integer(0),Integer(0),Integer(0),Integer(0),Integer(0),Integer(0),Integer(0),Integer(0)]); T [1 0 0] [0 0 0] [0 0 0] >>> W = T.kernel_on(V); W.basis() [ (0, 1, 0) ] >>> W.is_submodule(V) True
V = span([[1/7,0,0] ,[0,1,0]], ZZ); V T = matrix(ZZ,3,[1,0,0,0,0,0,0,0,0]); T W = T.kernel_on(V); W.basis() W.is_submodule(V)
- left_eigenmatrix(other=None)[source]¶
Return matrices \(D\) and \(P\), where \(D\) is a diagonal matrix of eigenvalues and the rows of \(P\) are corresponding eigenvectors (or zero vectors).
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved
OUTPUT:
If
selfis a square matrix \(A\), then the output is a diagonal matrix \(D\) and a matrix \(P\) such that\[P A = D P,\]where the rows of \(P\) are eigenvectors of \(A\) and the diagonal entries of \(D\) are the corresponding eigenvalues.
If a matrix \(B\) is passed as optional argument, the output is a solution to the generalized eigenvalue problem such that
\[P A = D P B.\]The ordinary eigenvalue problem is equivalent to the generalized one if \(B\) is the identity matrix.
The generalized eigenvector decomposition is currently only implemented for matrices over
RDFandCDF.EXAMPLES:
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: D, P = A.eigenmatrix_left() sage: D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] sage: P [ 1 -2 1] [ 1 0.3101020514433644? -0.3797958971132713?] [ 1 1.289897948556636? 1.579795897113272?] sage: P*A == D*P True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> D, P = A.eigenmatrix_left() >>> D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] >>> P [ 1 -2 1] [ 1 0.3101020514433644? -0.3797958971132713?] [ 1 1.289897948556636? 1.579795897113272?] >>> P*A == D*P True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A D, P = A.eigenmatrix_left() D P P*A == D*P
Because \(P\) is invertible, \(A\) is diagonalizable.
sage: A == (~P)*D*P # needs sage.rings.number_field True
>>> from sage.all import * >>> A == (~P)*D*P # needs sage.rings.number_field True
A == (~P)*D*P # needs sage.rings.number_field
The matrix \(P\) may contain zero rows corresponding to eigenvalues for which the algebraic multiplicity is greater than the geometric multiplicity. In these cases, the matrix is not diagonalizable.
sage: # needs sage.rings.number_field sage: A = jordan_block(2, 3); A [2 1 0] [0 2 1] [0 0 2] sage: D, P = A.eigenmatrix_left() sage: D [2 0 0] [0 2 0] [0 0 2] sage: P [0 0 1] [0 0 0] [0 0 0] sage: P*A == D*P True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = jordan_block(Integer(2), Integer(3)); A [2 1 0] [0 2 1] [0 0 2] >>> D, P = A.eigenmatrix_left() >>> D [2 0 0] [0 2 0] [0 0 2] >>> P [0 0 1] [0 0 0] [0 0 0] >>> P*A == D*P True
# needs sage.rings.number_field A = jordan_block(2, 3); A D, P = A.eigenmatrix_left() D P P*A == D*P
A generalized eigenvector decomposition:
sage: # needs scipy sage: A = matrix(RDF, [[1, -2], [3, 4]]) sage: B = matrix(RDF, [[0, 7], [2, -3]]) sage: D, P = A.eigenmatrix_left(B) sage: (P * A - D * P * B).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy >>> A = matrix(RDF, [[Integer(1), -Integer(2)], [Integer(3), Integer(4)]]) >>> B = matrix(RDF, [[Integer(0), Integer(7)], [Integer(2), -Integer(3)]]) >>> D, P = A.eigenmatrix_left(B) >>> (P * A - D * P * B).norm() < RealNumber('1e-14') True
# needs scipy A = matrix(RDF, [[1, -2], [3, 4]]) B = matrix(RDF, [[0, 7], [2, -3]]) D, P = A.eigenmatrix_left(B) (P * A - D * P * B).norm() < 1e-14
The matrix \(B\) in a generalized eigenvalue problem may be singular:
sage: # needs scipy sage.rings.complex_double sage.symbolic sage: A = matrix.identity(CDF, 2) sage: B = matrix(CDF, [[2, 1+I], [4, 2+2*I]]) sage: D, P = A.eigenmatrix_left(B) sage: D.diagonal() # tol 1e-14 [0.2 - 0.1*I, +infinity]
>>> from sage.all import * >>> # needs scipy sage.rings.complex_double sage.symbolic >>> A = matrix.identity(CDF, Integer(2)) >>> B = matrix(CDF, [[Integer(2), Integer(1)+I], [Integer(4), Integer(2)+Integer(2)*I]]) >>> D, P = A.eigenmatrix_left(B) >>> D.diagonal() # tol 1e-14 [0.2 - 0.1*I, +infinity]
# needs scipy sage.rings.complex_double sage.symbolic A = matrix.identity(CDF, 2) B = matrix(CDF, [[2, 1+I], [4, 2+2*I]]) D, P = A.eigenmatrix_left(B) D.diagonal() # tol 1e-14
In this case, we can still verify the eigenvector equation for the first eigenvalue and first eigenvector:
sage: # needs scipy sage.rings.complex_double sage.symbolic sage: l = D[0, 0] sage: v = P[0, :] sage: (v * A - l * v * B).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy sage.rings.complex_double sage.symbolic >>> l = D[Integer(0), Integer(0)] >>> v = P[Integer(0), :] >>> (v * A - l * v * B).norm() < RealNumber('1e-14') True
# needs scipy sage.rings.complex_double sage.symbolic l = D[0, 0] v = P[0, :] (v * A - l * v * B).norm() < 1e-14
The second eigenvector is contained in the left kernel of \(B\):
sage: (P[1, :] * B).norm() < 1e-14 # needs scipy sage.rings.complex_double sage.symbolic True
>>> from sage.all import * >>> (P[Integer(1), :] * B).norm() < RealNumber('1e-14') # needs scipy sage.rings.complex_double sage.symbolic True
(P[1, :] * B).norm() < 1e-14 # needs scipy sage.rings.complex_double sage.symbolic
- left_eigenspaces(format='all', var='a', algebraic_multiplicity=False)[source]¶
Compute the left eigenspaces of a matrix.
Note that
eigenspaces_left()andleft_eigenspaces()are identical methods. Here “left” refers to the eigenvectors being placed to the left of the matrix.INPUT:
self– a square matrix over an exact field. For inexact matrices consult the numerical or symbolic matrix classesformat– one of:'all'– attempts to create every eigenspace. This will always be possible for matrices with rational entries'galois'– for each irreducible factor of the characteristic polynomial, a single eigenspace will be output for a single root/eigenvalue for the irreducible factorNone– default; uses the'all'format if the base ring is contained in an algebraically closed field which is implemented. Otherwise, uses the'galois'format.
var– string (default:'a'); variable name used to represent elements of the root field of each irreducible factor of the characteristic polynomial. Ifvar='a', then the root fields will be in terms ofa0, a1, a2, ..., where the numbering runs across all the irreducible factors of the characteristic polynomial, even for linear factors.algebraic_multiplicity– boolean (default:False); whether to include the algebraic multiplicity of each eigenvalue in the output. See the discussion below.
OUTPUT:
If
algebraic_multiplicity=False, return a list of pairs \((e, V)\) where \(e\) is an eigenvalue of the matrix, and \(V\) is the corresponding left eigenspace. For Galois conjugates of eigenvalues, there may be just one representative eigenspace, depending on theformatkeyword.If
algebraic_multiplicity=True, return a list of triples \((e, V, n)\) where \(e\) and \(V\) are as above and \(n\) is the algebraic multiplicity of the eigenvalue.Warning
Uses a somewhat naive algorithm (simply factors the characteristic polynomial and computes kernels directly over the extension field).
EXAMPLES:
We compute the left eigenspaces of a \(3\times 3\) rational matrix. First, we request
'all'of the eigenvalues, so the results are in the field of algebraic numbers,QQbar. Then we request just one eigenspace per irreducible factor of the characteristic polynomial withformat='galois'.sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: es = A.eigenspaces_left(format='all'); es # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.3101020514433644? -0.3797958971132713?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 1.289897948556636? 1.579795897113272?]) ] sage: # needs sage.rings.number_field sage: es = A.eigenspaces_left(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ] sage: es = A.eigenspaces_left(format='galois', ....: algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5], 1) ] sage: e, v, n = es[0]; v = v.basis()[0] sage: delta = e*v - v*A sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> es = A.eigenspaces_left(format='all'); es # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.3101020514433644? -0.3797958971132713?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 1.289897948556636? 1.579795897113272?]) ] >>> # needs sage.rings.number_field >>> es = A.eigenspaces_left(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ] >>> es = A.eigenspaces_left(format='galois', ... algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5], 1) ] >>> e, v, n = es[Integer(0)]; v = v.basis()[Integer(0)] >>> delta = e*v - v*A >>> abs(abs(delta)) < RealNumber('1e-10') True
A = matrix(QQ, 3, 3, range(9)); A es = A.eigenspaces_left(format='all'); es # needs sage.rings.number_field # needs sage.rings.number_field es = A.eigenspaces_left(format='galois'); es es = A.eigenspaces_left(format='galois', algebraic_multiplicity=True); es e, v, n = es[0]; v = v.basis()[0] delta = e*v - v*A abs(abs(delta)) < 1e-10The same computation, but with implicit base change to a field.
sage: A = matrix(ZZ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ]
>>> from sage.all import * >>> A = matrix(ZZ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/15*a1 + 2/5 2/15*a1 - 1/5]) ]
A = matrix(ZZ, 3, 3, range(9)); A A.eigenspaces_left(format='galois') # needs sage.rings.number_field
We compute the left eigenspaces of the matrix of the Hecke operator \(T_2\) on level 43 modular symbols, both with all eigenvalues (the default) and with one subspace per factor.
sage: # needs sage.modular sage: A = ModularSymbols(43).T(2).matrix(); A [ 3 0 0 0 0 0 -1] [ 0 -2 1 0 0 0 0] [ 0 -1 1 1 0 -1 0] [ 0 -1 0 -1 2 -1 1] [ 0 -1 0 1 1 -1 1] [ 0 0 -2 0 2 -2 1] [ 0 0 -1 0 1 0 -1] sage: A.base_ring() Rational Field sage: f = A.charpoly(); f x^7 + x^6 - 12*x^5 - 16*x^4 + 36*x^3 + 52*x^2 - 32*x - 48 sage: factor(f) (x - 3) * (x + 2)^2 * (x^2 - 2)^2 sage: A.eigenspaces_left(algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (-1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 0.4142135623730951? 1 -1] [ 0 0 1 0 -1 0 2.414213562373095?], 2), (1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 -2.414213562373095? 1 -1] [ 0 0 1 0 -1 0 -0.4142135623730951?], 2) ] sage: A.eigenspaces_left(format='galois', algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (a2, Vector space of degree 7 and dimension 2 over Number Field in a2 with defining polynomial x^2 - 2 User basis matrix: [ 0 1 0 -1 -a2 - 1 1 -1] [ 0 0 1 0 -1 0 -a2 + 1], 2) ]
>>> from sage.all import * >>> # needs sage.modular >>> A = ModularSymbols(Integer(43)).T(Integer(2)).matrix(); A [ 3 0 0 0 0 0 -1] [ 0 -2 1 0 0 0 0] [ 0 -1 1 1 0 -1 0] [ 0 -1 0 -1 2 -1 1] [ 0 -1 0 1 1 -1 1] [ 0 0 -2 0 2 -2 1] [ 0 0 -1 0 1 0 -1] >>> A.base_ring() Rational Field >>> f = A.charpoly(); f x^7 + x^6 - 12*x^5 - 16*x^4 + 36*x^3 + 52*x^2 - 32*x - 48 >>> factor(f) (x - 3) * (x + 2)^2 * (x^2 - 2)^2 >>> A.eigenspaces_left(algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (-1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 0.4142135623730951? 1 -1] [ 0 0 1 0 -1 0 2.414213562373095?], 2), (1.414213562373095?, Vector space of degree 7 and dimension 2 over Algebraic Field User basis matrix: [ 0 1 0 -1 -2.414213562373095? 1 -1] [ 0 0 1 0 -1 0 -0.4142135623730951?], 2) ] >>> A.eigenspaces_left(format='galois', algebraic_multiplicity=True) [ (3, Vector space of degree 7 and dimension 1 over Rational Field User basis matrix: [ 1 0 1/7 0 -1/7 0 -2/7], 1), (-2, Vector space of degree 7 and dimension 2 over Rational Field User basis matrix: [ 0 1 0 1 -1 1 -1] [ 0 0 1 0 -1 2 -1], 2), (a2, Vector space of degree 7 and dimension 2 over Number Field in a2 with defining polynomial x^2 - 2 User basis matrix: [ 0 1 0 -1 -a2 - 1 1 -1] [ 0 0 1 0 -1 0 -a2 + 1], 2) ]
# needs sage.modular A = ModularSymbols(43).T(2).matrix(); A A.base_ring() f = A.charpoly(); f factor(f) A.eigenspaces_left(algebraic_multiplicity=True) A.eigenspaces_left(format='galois', algebraic_multiplicity=True)
Next we compute the left eigenspaces over the finite field of order 11.
sage: # needs sage.modular sage.rings.finite_rings sage: A = ModularSymbols(43, base_ring=GF(11), sign=1).T(2).matrix(); A [ 3 0 9 0] [ 0 9 0 10] [ 0 0 10 1] [ 0 0 1 1] sage: A.base_ring() Finite Field of size 11 sage: A.charpoly() x^4 + 10*x^3 + 3*x^2 + 2*x + 1 sage: A.eigenspaces_left(format='galois', var='beta') [ (9, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [0 1 5 6]), (3, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [1 0 1 6]), (beta2, Vector space of degree 4 and dimension 1 over Univariate Quotient Polynomial Ring in beta2 over Finite Field of size 11 with modulus x^2 + 9 User basis matrix: [ 0 0 1 beta2 + 1]) ]
>>> from sage.all import * >>> # needs sage.modular sage.rings.finite_rings >>> A = ModularSymbols(Integer(43), base_ring=GF(Integer(11)), sign=Integer(1)).T(Integer(2)).matrix(); A [ 3 0 9 0] [ 0 9 0 10] [ 0 0 10 1] [ 0 0 1 1] >>> A.base_ring() Finite Field of size 11 >>> A.charpoly() x^4 + 10*x^3 + 3*x^2 + 2*x + 1 >>> A.eigenspaces_left(format='galois', var='beta') [ (9, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [0 1 5 6]), (3, Vector space of degree 4 and dimension 1 over Finite Field of size 11 User basis matrix: [1 0 1 6]), (beta2, Vector space of degree 4 and dimension 1 over Univariate Quotient Polynomial Ring in beta2 over Finite Field of size 11 with modulus x^2 + 9 User basis matrix: [ 0 0 1 beta2 + 1]) ]
# needs sage.modular sage.rings.finite_rings A = ModularSymbols(43, base_ring=GF(11), sign=1).T(2).matrix(); A A.base_ring() A.charpoly() A.eigenspaces_left(format='galois', var='beta')
This method is only applicable to exact matrices. The “eigenmatrix” routines for matrices with double-precision floating-point entries (
RDF,CDF) are the best alternative. (Since some platforms return eigenvectors that are the negatives of those given here, this one example is not tested here.) There are also “eigenmatrix” routines for matrices with symbolic entries.sage: A = matrix(QQ, 3, 3, range(9)) sage: A.change_ring(RR).eigenspaces_left() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options sage: # needs scipy sage: em = A.change_ring(RDF).eigenmatrix_left() sage: eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] sage: eigenvectors = em[1]; eigenvectors # not tested [ 0.440242867... 0.567868371... 0.695493875...] [ 0.897878732... 0.278434036... -0.341010658...] [ 0.408248290... -0.816496580... 0.408248290...] sage: # needs sage.symbolic sage: x, y = var('x y') sage: S = matrix([[x, y], [y, 3*x^2]]) sage: em = S.eigenmatrix_left() sage: eigenvalues = em[0]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] sage: eigenvectors = em[1]; eigenvectors [ 1 1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y] [ 1 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))) >>> A.change_ring(RR).eigenspaces_left() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options >>> # needs scipy >>> em = A.change_ring(RDF).eigenmatrix_left() >>> eigenvalues = em[Integer(0)]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] >>> eigenvectors = em[Integer(1)]; eigenvectors # not tested [ 0.440242867... 0.567868371... 0.695493875...] [ 0.897878732... 0.278434036... -0.341010658...] [ 0.408248290... -0.816496580... 0.408248290...] >>> # needs sage.symbolic >>> x, y = var('x y') >>> S = matrix([[x, y], [y, Integer(3)*x**Integer(2)]]) >>> em = S.eigenmatrix_left() >>> eigenvalues = em[Integer(0)]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] >>> eigenvectors = em[Integer(1)]; eigenvectors [ 1 1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y] [ 1 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
A = matrix(QQ, 3, 3, range(9)) A.change_ring(RR).eigenspaces_left() # needs scipy em = A.change_ring(RDF).eigenmatrix_left() eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 eigenvectors = em[1]; eigenvectors # not tested # needs sage.symbolic x, y = var('x y') S = matrix([[x, y], [y, 3*x^2]]) em = S.eigenmatrix_left() eigenvalues = em[0]; eigenvalues eigenvectors = em[1]; eigenvectorsA request for
'all'the eigenvalues, when it is not possible, will raise an error. Using the'galois'format option is more likely to be successful.sage: # needs sage.rings.finite_rings sage: F.<b> = FiniteField(11^2) sage: A = matrix(F, [[b + 1, b + 1], [10*b + 4, 5*b + 4]]) sage: A.eigenspaces_left(format='all') # needs sage.rings.number_field Traceback (most recent call last): ... NotImplementedError: unable to construct eigenspaces for eigenvalues outside the base field, try the keyword option: format='galois' sage: A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (a0, Vector space of degree 2 and dimension 1 over Univariate Quotient Polynomial Ring in a0 over Finite Field in b of size 11^2 with modulus x^2 + (5*b + 6)*x + 8*b + 10 User basis matrix: [ 1 6*b*a0 + 3*b + 1]) ]
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(11)**Integer(2), names=('b',)); (b,) = F._first_ngens(1) >>> A = matrix(F, [[b + Integer(1), b + Integer(1)], [Integer(10)*b + Integer(4), Integer(5)*b + Integer(4)]]) >>> A.eigenspaces_left(format='all') # needs sage.rings.number_field Traceback (most recent call last): ... NotImplementedError: unable to construct eigenspaces for eigenvalues outside the base field, try the keyword option: format='galois' >>> A.eigenspaces_left(format='galois') # needs sage.rings.number_field [ (a0, Vector space of degree 2 and dimension 1 over Univariate Quotient Polynomial Ring in a0 over Finite Field in b of size 11^2 with modulus x^2 + (5*b + 6)*x + 8*b + 10 User basis matrix: [ 1 6*b*a0 + 3*b + 1]) ]
# needs sage.rings.finite_rings F.<b> = FiniteField(11^2) A = matrix(F, [[b + 1, b + 1], [10*b + 4, 5*b + 4]]) A.eigenspaces_left(format='all') # needs sage.rings.number_field A.eigenspaces_left(format='galois') # needs sage.rings.number_field
- left_eigenvectors(other=None, extend=True)[source]¶
Compute the left eigenvectors of a matrix.
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved (currently supported only if the base ring ofselfisRDForCDF)extend– boolean (default:True)
OUTPUT:
For each distinct eigenvalue, returns a list of the form (e,V,n) where e is the eigenvalue, V is a list of eigenvectors forming a basis for the corresponding left eigenspace, and n is the algebraic multiplicity of the eigenvalue.
If the option extend is set to False, then only the eigenvalues that live in the base ring are considered.
EXAMPLES:
We compute the left eigenvectors of a \(3\times 3\) rational matrix.
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: es = A.eigenvectors_left(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.3101020514433644?, -0.3797958971132713?)], 1), (13.34846922834954?, [(1, 1.289897948556636?, 1.579795897113272?)], 1)] sage: eval, [evec], mult = es[0] sage: delta = eval*evec - evec*A sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> es = A.eigenvectors_left(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.3101020514433644?, -0.3797958971132713?)], 1), (13.34846922834954?, [(1, 1.289897948556636?, 1.579795897113272?)], 1)] >>> eval, [evec], mult = es[Integer(0)] >>> delta = eval*evec - evec*A >>> abs(abs(delta)) < RealNumber('1e-10') True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A es = A.eigenvectors_left(); es eval, [evec], mult = es[0] delta = eval*evec - evec*A abs(abs(delta)) < 1e-10
Notice the difference between considering ring extensions or not.
sage: M = matrix(QQ, [[0,-1,0], [1,0,0], [0,0,2]]) sage: M.eigenvectors_left() # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1), (-1*I, [(1, -1*I, 0)], 1), (1*I, [(1, 1*I, 0)], 1)] sage: M.eigenvectors_left(extend=False) # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1)]
>>> from sage.all import * >>> M = matrix(QQ, [[Integer(0),-Integer(1),Integer(0)], [Integer(1),Integer(0),Integer(0)], [Integer(0),Integer(0),Integer(2)]]) >>> M.eigenvectors_left() # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1), (-1*I, [(1, -1*I, 0)], 1), (1*I, [(1, 1*I, 0)], 1)] >>> M.eigenvectors_left(extend=False) # needs sage.rings.number_field [(2, [ (0, 0, 1) ], 1)]
M = matrix(QQ, [[0,-1,0], [1,0,0], [0,0,2]]) M.eigenvectors_left() # needs sage.rings.number_field M.eigenvectors_left(extend=False) # needs sage.rings.number_field
- left_kernel(*args, **kwds)[source]¶
Return the left kernel of this matrix, as a vector space or free module.
This is the set of vectors
xsuch thatx*self = 0.Note
For the right kernel, use
right_kernel(). The methodkernel()is exactly equal toleft_kernel().For inexact rings use
right_kernel_matrix()withbasis='computed'(on the transpose of the matrix) to avoid echelonizing.INPUT:
algorithm– (default:'default') a keyword that selects the algorithm employed. Allowable values are:'default'– allows the algorithm to be chosen automatically'generic'– naive algorithm usable for matrices over any field'flint'– FLINT library code for matrices over the rationals or the integers'pari'– PARI library code for matrices over number fields or the integers'padic'– padic algorithm from IML library for matrices over the rationals and integers'pluq'– PLUQ matrix factorization for matrices mod 2
basis– (default:'echelon') a keyword that describes the format of the basis used to construct the left kernel. Allowable values are:‘echelon’: the basis matrix is returned in echelon form
‘pivot’ : each basis vector is computed from the reduced row-echelon form of
selfby placing a single one in a non-pivot column and zeros in the remaining non-pivot columns. Only available for matrices over fields.‘LLL’: an LLL-reduced basis. Only available for matrices over the integers.
OUTPUT:
A vector space or free module whose degree equals the number of rows in
selfand which contains all the vectorsxsuch thatx*self = 0.If
selfhas 0 rows, the kernel has dimension 0, while ifselfhas 0 columns the kernel is the entire ambient vector space.The result is cached. Requesting the left kernel a second time, but with a different basis format, will return the cached result with the format from the first computation.
Note
For much more detailed documentation of the various options see
right_kernel(), since this method just computes the right kernel of the transpose ofself.EXAMPLES:
Over the rationals with a basis matrix in echelon form.
sage: A = matrix(QQ, [[1, 2, 4, -7, 4], ....: [1, 1, 0, 2, -1], ....: [1, 0, 3, -3, 1], ....: [0, -1, -1, 3, -2], ....: [0, 0, -1, 2, -1]]) sage: A.left_kernel() Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1 2 -1] [ 0 1 -1 1 -4]
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), Integer(2), Integer(4), -Integer(7), Integer(4)], ... [Integer(1), Integer(1), Integer(0), Integer(2), -Integer(1)], ... [Integer(1), Integer(0), Integer(3), -Integer(3), Integer(1)], ... [Integer(0), -Integer(1), -Integer(1), Integer(3), -Integer(2)], ... [Integer(0), Integer(0), -Integer(1), Integer(2), -Integer(1)]]) >>> A.left_kernel() Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1 2 -1] [ 0 1 -1 1 -4]
A = matrix(QQ, [[1, 2, 4, -7, 4], [1, 1, 0, 2, -1], [1, 0, 3, -3, 1], [0, -1, -1, 3, -2], [0, 0, -1, 2, -1]]) A.left_kernel()Over a finite field, with a basis matrix in “pivot” format.
sage: A = matrix(FiniteField(7), [[5, 0, 5, 2, 4], ....: [1, 3, 2, 3, 6], ....: [1, 1, 6, 5, 3], ....: [2, 5, 6, 0, 0]]) sage: A.kernel(basis='pivot') Vector space of degree 4 and dimension 2 over Finite Field of size 7 User basis matrix: [5 2 1 0] [6 3 0 1]
>>> from sage.all import * >>> A = matrix(FiniteField(Integer(7)), [[Integer(5), Integer(0), Integer(5), Integer(2), Integer(4)], ... [Integer(1), Integer(3), Integer(2), Integer(3), Integer(6)], ... [Integer(1), Integer(1), Integer(6), Integer(5), Integer(3)], ... [Integer(2), Integer(5), Integer(6), Integer(0), Integer(0)]]) >>> A.kernel(basis='pivot') Vector space of degree 4 and dimension 2 over Finite Field of size 7 User basis matrix: [5 2 1 0] [6 3 0 1]
A = matrix(FiniteField(7), [[5, 0, 5, 2, 4], [1, 3, 2, 3, 6], [1, 1, 6, 5, 3], [2, 5, 6, 0, 0]]) A.kernel(basis='pivot')The left kernel of a zero matrix is the entire ambient vector space whose degree equals the number of rows of
self(i.e. everything).sage: A = MatrixSpace(QQ, 3, 4)(0) sage: A.kernel() Vector space of degree 3 and dimension 3 over Rational Field Basis matrix: [1 0 0] [0 1 0] [0 0 1]
>>> from sage.all import * >>> A = MatrixSpace(QQ, Integer(3), Integer(4))(Integer(0)) >>> A.kernel() Vector space of degree 3 and dimension 3 over Rational Field Basis matrix: [1 0 0] [0 1 0] [0 0 1]
A = MatrixSpace(QQ, 3, 4)(0) A.kernel()
We test matrices with no rows or columns.
sage: A = matrix(QQ, 2, 0) sage: A.left_kernel() Vector space of degree 2 and dimension 2 over Rational Field Basis matrix: [1 0] [0 1] sage: A = matrix(QQ, 0, 2) sage: A.left_kernel() Vector space of degree 0 and dimension 0 over Rational Field Basis matrix: []
>>> from sage.all import * >>> A = matrix(QQ, Integer(2), Integer(0)) >>> A.left_kernel() Vector space of degree 2 and dimension 2 over Rational Field Basis matrix: [1 0] [0 1] >>> A = matrix(QQ, Integer(0), Integer(2)) >>> A.left_kernel() Vector space of degree 0 and dimension 0 over Rational Field Basis matrix: []
A = matrix(QQ, 2, 0) A.left_kernel() A = matrix(QQ, 0, 2) A.left_kernel()
The results are cached. Note that requesting a new format for the basis is ignored and the cached copy is returned. Work with a copy if you need a new left kernel, or perhaps investigate the
right_kernel_matrix()method on the transpose, which does not cache its results and is more flexible.sage: A = matrix(QQ, [[1,1],[2,2]]) sage: K1 = A.left_kernel() sage: K1 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] sage: K2 = A.left_kernel() sage: K1 is K2 True sage: K3 = A.left_kernel(basis='pivot') sage: K3 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] sage: B = copy(A) sage: K3 = B.left_kernel(basis='pivot') sage: K3 Vector space of degree 2 and dimension 1 over Rational Field User basis matrix: [-2 1] sage: K3 is K1 False sage: K3 == K1 True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1),Integer(1)],[Integer(2),Integer(2)]]) >>> K1 = A.left_kernel() >>> K1 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] >>> K2 = A.left_kernel() >>> K1 is K2 True >>> K3 = A.left_kernel(basis='pivot') >>> K3 Vector space of degree 2 and dimension 1 over Rational Field Basis matrix: [ 1 -1/2] >>> B = copy(A) >>> K3 = B.left_kernel(basis='pivot') >>> K3 Vector space of degree 2 and dimension 1 over Rational Field User basis matrix: [-2 1] >>> K3 is K1 False >>> K3 == K1 True
A = matrix(QQ, [[1,1],[2,2]]) K1 = A.left_kernel() K1 K2 = A.left_kernel() K1 is K2 K3 = A.left_kernel(basis='pivot') K3 B = copy(A) K3 = B.left_kernel(basis='pivot') K3 K3 is K1 K3 == K1
- left_kernel_matrix(*args, **kwds)[source]¶
Return a matrix whose rows form a basis for the left kernel of
self.This method is a thin wrapper around
right_kernel_matrix(). For supported parameters and input/output formats, see there.EXAMPLES:
sage: M = matrix([[1,2],[3,4],[5,6]]) sage: K = M.left_kernel_matrix(); K [ 1 -2 1] sage: K * M [0 0]
>>> from sage.all import * >>> M = matrix([[Integer(1),Integer(2)],[Integer(3),Integer(4)],[Integer(5),Integer(6)]]) >>> K = M.left_kernel_matrix(); K [ 1 -2 1] >>> K * M [0 0]
M = matrix([[1,2],[3,4],[5,6]]) K = M.left_kernel_matrix(); K K * M
- left_nullity()[source]¶
Return the (left) nullity of this matrix, which is the dimension of the (left) kernel of this matrix acting from the right on row vectors.
EXAMPLES:
sage: M = Matrix(QQ, [[1,0,0,1], [0,1,1,0], [1,1,1,0]]) sage: M.nullity() 0 sage: M.left_nullity() 0
>>> from sage.all import * >>> M = Matrix(QQ, [[Integer(1),Integer(0),Integer(0),Integer(1)], [Integer(0),Integer(1),Integer(1),Integer(0)], [Integer(1),Integer(1),Integer(1),Integer(0)]]) >>> M.nullity() 0 >>> M.left_nullity() 0
M = Matrix(QQ, [[1,0,0,1], [0,1,1,0], [1,1,1,0]]) M.nullity() M.left_nullity()
sage: A = M.transpose() sage: A.nullity() 1 sage: A.left_nullity() 1
>>> from sage.all import * >>> A = M.transpose() >>> A.nullity() 1 >>> A.left_nullity() 1
A = M.transpose() A.nullity() A.left_nullity()
>>> from sage.all import * >>> A = M.transpose() >>> A.nullity() 1 >>> A.left_nullity() 1
A = M.transpose() A.nullity() A.left_nullity()
sage: M = M.change_ring(ZZ) sage: M.nullity() 0 sage: A = M.transpose() sage: A.nullity() 1
>>> from sage.all import * >>> M = M.change_ring(ZZ) >>> M.nullity() 0 >>> A = M.transpose() >>> A.nullity() 1
M = M.change_ring(ZZ) M.nullity() A = M.transpose() A.nullity()
>>> from sage.all import * >>> M = M.change_ring(ZZ) >>> M.nullity() 0 >>> A = M.transpose() >>> A.nullity() 1
M = M.change_ring(ZZ) M.nullity() A = M.transpose() A.nullity()
- matrix_window(row=0, col=0, nrows=-1, ncols=-1, check=1)[source]¶
Return the requested matrix window.
EXAMPLES:
sage: A = matrix(QQ, 3, 3, range(9)) sage: A.matrix_window(1,1, 2, 1) Matrix window of size 2 x 1 at (1,1): [0 1 2] [3 4 5] [6 7 8]
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))) >>> A.matrix_window(Integer(1),Integer(1), Integer(2), Integer(1)) Matrix window of size 2 x 1 at (1,1): [0 1 2] [3 4 5] [6 7 8]
A = matrix(QQ, 3, 3, range(9)) A.matrix_window(1,1, 2, 1)
We test the optional check flag.
sage: matrix([1]).matrix_window(0,1,1,1, check=False) Matrix window of size 1 x 1 at (0,1): [1] sage: matrix([1]).matrix_window(0,1,1,1) Traceback (most recent call last): ... IndexError: matrix window index out of range
>>> from sage.all import * >>> matrix([Integer(1)]).matrix_window(Integer(0),Integer(1),Integer(1),Integer(1), check=False) Matrix window of size 1 x 1 at (0,1): [1] >>> matrix([Integer(1)]).matrix_window(Integer(0),Integer(1),Integer(1),Integer(1)) Traceback (most recent call last): ... IndexError: matrix window index out of range
matrix([1]).matrix_window(0,1,1,1, check=False) matrix([1]).matrix_window(0,1,1,1)
Another test of bounds checking:
sage: matrix([1]).matrix_window(1,1,1,1) Traceback (most recent call last): ... IndexError: matrix window index out of range
>>> from sage.all import * >>> matrix([Integer(1)]).matrix_window(Integer(1),Integer(1),Integer(1),Integer(1)) Traceback (most recent call last): ... IndexError: matrix window index out of range
matrix([1]).matrix_window(1,1,1,1)
- maxspin(v)[source]¶
Compute the largest integer n such that the list of vectors \(S=[v, v*A, ..., v * A^n]\) are linearly independent, and returns that list.
INPUT:
self– matrixv– vector
OUTPUT: list of Vectors
ALGORITHM: The current implementation just adds vectors to a vector space until the dimension doesn’t grow. This could be optimized by directly using matrices and doing an efficient Echelon form. Also, when the base is Q, maybe we could simultaneously keep track of what is going on in the reduction modulo p, which might make things much faster.
EXAMPLES:
sage: t = matrix(QQ, 3, 3, range(9)); t [0 1 2] [3 4 5] [6 7 8] sage: v = (QQ^3).0 sage: t.maxspin(v) [(1, 0, 0), (0, 1, 2), (15, 18, 21)] sage: k = t.kernel(); k Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [ 1 -2 1] sage: t.maxspin(k.0) [(1, -2, 1)]
>>> from sage.all import * >>> t = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); t [0 1 2] [3 4 5] [6 7 8] >>> v = (QQ**Integer(3)).gen(0) >>> t.maxspin(v) [(1, 0, 0), (0, 1, 2), (15, 18, 21)] >>> k = t.kernel(); k Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [ 1 -2 1] >>> t.maxspin(k.gen(0)) [(1, -2, 1)]
t = matrix(QQ, 3, 3, range(9)); t v = (QQ^3).0 t.maxspin(v) k = t.kernel(); k t.maxspin(k.0)
- minimal_polynomial(var='x', **kwds)[source]¶
This is a synonym for
self.minpoly.EXAMPLES:
sage: a = matrix(QQ, 4, 4, range(16)) sage: a.minimal_polynomial('z') # needs sage.libs.pari z^3 - 30*z^2 - 80*z sage: a.minpoly() # needs sage.libs.pari x^3 - 30*x^2 - 80*x
>>> from sage.all import * >>> a = matrix(QQ, Integer(4), Integer(4), range(Integer(16))) >>> a.minimal_polynomial('z') # needs sage.libs.pari z^3 - 30*z^2 - 80*z >>> a.minpoly() # needs sage.libs.pari x^3 - 30*x^2 - 80*x
a = matrix(QQ, 4, 4, range(16)) a.minimal_polynomial('z') # needs sage.libs.pari a.minpoly() # needs sage.libs.pari
- minors(k)[source]¶
Return the list of all \(k \times k\) minors of
self.Let \(A\) be an \(m \times n\) matrix and \(k\) an integer with \(0 \leq k\), \(k \leq m\) and \(k \leq n\). A \(k \times k\) minor of \(A\) is the determinant of a \(k \times k\) matrix obtained from \(A\) by deleting \(m - k\) rows and \(n - k\) columns. There are no \(k \times k\) minors of \(A\) if \(k\) is larger than either \(m\) or \(n\).
The returned list is sorted in lexicographical row major ordering, e.g., if A is a \(3 \times 3\) matrix then the minors returned are with these rows/columns: [ [0, 1]x[0, 1], [0, 1]x[0, 2], [0, 1]x[1, 2], [0, 2]x[0, 1], [0, 2]x[0, 2], [0, 2]x[1, 2], [1, 2]x[0, 1], [1, 2]x[0, 2], [1, 2]x[1, 2] ].
INPUT:
k– integer
EXAMPLES:
sage: A = Matrix(ZZ, 2,3, [1,2,3,4,5,6]); A [1 2 3] [4 5 6] sage: A.minors(2) [-3, -6, -3] sage: A.minors(1) [1, 2, 3, 4, 5, 6] sage: A.minors(0) [1] sage: A.minors(5) []
>>> from sage.all import * >>> A = Matrix(ZZ, Integer(2),Integer(3), [Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6)]); A [1 2 3] [4 5 6] >>> A.minors(Integer(2)) [-3, -6, -3] >>> A.minors(Integer(1)) [1, 2, 3, 4, 5, 6] >>> A.minors(Integer(0)) [1] >>> A.minors(Integer(5)) []
A = Matrix(ZZ, 2,3, [1,2,3,4,5,6]); A A.minors(2) A.minors(1) A.minors(0) A.minors(5)
sage: k = GF(37) sage: P.<x0,x1,x2> = PolynomialRing(k) sage: A = Matrix(P, 2, 3, [x0*x1, x0, x1, x2, x2 + 16, x2 + 5*x1]) sage: A.minors(2) # needs sage.rings.finite_rings [x0*x1*x2 + 16*x0*x1 - x0*x2, 5*x0*x1^2 + x0*x1*x2 - x1*x2, 5*x0*x1 + x0*x2 - x1*x2 - 16*x1]
>>> from sage.all import * >>> k = GF(Integer(37)) >>> P = PolynomialRing(k, names=('x0', 'x1', 'x2',)); (x0, x1, x2,) = P._first_ngens(3) >>> A = Matrix(P, Integer(2), Integer(3), [x0*x1, x0, x1, x2, x2 + Integer(16), x2 + Integer(5)*x1]) >>> A.minors(Integer(2)) # needs sage.rings.finite_rings [x0*x1*x2 + 16*x0*x1 - x0*x2, 5*x0*x1^2 + x0*x1*x2 - x1*x2, 5*x0*x1 + x0*x2 - x1*x2 - 16*x1]
k = GF(37) P.<x0,x1,x2> = PolynomialRing(k) A = Matrix(P, 2, 3, [x0*x1, x0, x1, x2, x2 + 16, x2 + 5*x1]) A.minors(2) # needs sage.rings.finite_rings
>>> from sage.all import * >>> k = GF(Integer(37)) >>> P = PolynomialRing(k, names=('x0', 'x1', 'x2',)); (x0, x1, x2,) = P._first_ngens(3) >>> A = Matrix(P, Integer(2), Integer(3), [x0*x1, x0, x1, x2, x2 + Integer(16), x2 + Integer(5)*x1]) >>> A.minors(Integer(2)) # needs sage.rings.finite_rings [x0*x1*x2 + 16*x0*x1 - x0*x2, 5*x0*x1^2 + x0*x1*x2 - x1*x2, 5*x0*x1 + x0*x2 - x1*x2 - 16*x1]
k = GF(37) P.<x0,x1,x2> = PolynomialRing(k) A = Matrix(P, 2, 3, [x0*x1, x0, x1, x2, x2 + 16, x2 + 5*x1]) A.minors(2) # needs sage.rings.finite_rings
This test addresses an issue raised at Issue #20512:
sage: A.minors(0)[0].parent() == P True
>>> from sage.all import * >>> A.minors(Integer(0))[Integer(0)].parent() == P True
A.minors(0)[0].parent() == P
- minpoly(var='x', **kwds)[source]¶
Return the minimal polynomial of
self.This uses a simplistic - and potentially very very slow - algorithm that involves computing kernels to determine the powers of the factors of the charpoly that divide the minpoly.
EXAMPLES:
sage: # needs sage.rings.finite_rings sage: A = matrix(GF(9, 'c'), 4, [1,1,0,0, 0,1,0,0, 0,0,5,0, 0,0,0,5]) sage: factor(A.minpoly()) (x + 1) * (x + 2)^2 sage: A.minpoly()(A) == 0 True sage: factor(A.charpoly()) (x + 1)^2 * (x + 2)^2
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> A = matrix(GF(Integer(9), 'c'), Integer(4), [Integer(1),Integer(1),Integer(0),Integer(0), Integer(0),Integer(1),Integer(0),Integer(0), Integer(0),Integer(0),Integer(5),Integer(0), Integer(0),Integer(0),Integer(0),Integer(5)]) >>> factor(A.minpoly()) (x + 1) * (x + 2)^2 >>> A.minpoly()(A) == Integer(0) True >>> factor(A.charpoly()) (x + 1)^2 * (x + 2)^2
# needs sage.rings.finite_rings A = matrix(GF(9, 'c'), 4, [1,1,0,0, 0,1,0,0, 0,0,5,0, 0,0,0,5]) factor(A.minpoly()) A.minpoly()(A) == 0 factor(A.charpoly())
The default variable name is \(x\), but you can specify another name:
sage: factor(A.minpoly('y')) # needs sage.rings.finite_rings (y + 1) * (y + 2)^2
>>> from sage.all import * >>> factor(A.minpoly('y')) # needs sage.rings.finite_rings (y + 1) * (y + 2)^2
factor(A.minpoly('y')) # needs sage.rings.finite_rings
- norm(p=2)[source]¶
Return the p-norm of this matrix, where \(p\) can be 1, 2, \(\inf\), or the Frobenius norm.
INPUT:
self– a matrix whose entries are coercible intoCDFp– one of the following options:1– the largest column-sum norm2– (default) the Euclidean normInfinity– the largest row-sum norm'frob'– the Frobenius (sum of squares) norm
OUTPUT: RDF number
See also
EXAMPLES:
sage: A = matrix(ZZ, [[1,2,4,3], [-1,0,3,-10]]) sage: A.norm(1) 13.0 sage: A.norm(Infinity) 14.0 sage: B = random_matrix(QQ, 20, 21) sage: B.norm(Infinity) == (B.transpose()).norm(1) True
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(1),Integer(2),Integer(4),Integer(3)], [-Integer(1),Integer(0),Integer(3),-Integer(10)]]) >>> A.norm(Integer(1)) 13.0 >>> A.norm(Infinity) 14.0 >>> B = random_matrix(QQ, Integer(20), Integer(21)) >>> B.norm(Infinity) == (B.transpose()).norm(Integer(1)) True
A = matrix(ZZ, [[1,2,4,3], [-1,0,3,-10]]) A.norm(1) A.norm(Infinity) B = random_matrix(QQ, 20, 21) B.norm(Infinity) == (B.transpose()).norm(1)
sage: Id = identity_matrix(12) sage: Id.norm(2) # needs scipy 1.0 sage: # needs scipy sage.rings.real_mpfr sage: A = matrix(RR, 2, 2, [13,-4,-4,7]) sage: A.norm() # rel tol 2e-16 14.999999999999998
>>> from sage.all import * >>> Id = identity_matrix(Integer(12)) >>> Id.norm(Integer(2)) # needs scipy 1.0 >>> # needs scipy sage.rings.real_mpfr >>> A = matrix(RR, Integer(2), Integer(2), [Integer(13),-Integer(4),-Integer(4),Integer(7)]) >>> A.norm() # rel tol 2e-16 14.999999999999998
Id = identity_matrix(12) Id.norm(2) # needs scipy # needs scipy sage.rings.real_mpfr A = matrix(RR, 2, 2, [13,-4,-4,7]) A.norm() # rel tol 2e-16
>>> from sage.all import * >>> Id = identity_matrix(Integer(12)) >>> Id.norm(Integer(2)) # needs scipy 1.0 >>> # needs scipy sage.rings.real_mpfr >>> A = matrix(RR, Integer(2), Integer(2), [Integer(13),-Integer(4),-Integer(4),Integer(7)]) >>> A.norm() # rel tol 2e-16 14.999999999999998
Id = identity_matrix(12) Id.norm(2) # needs scipy # needs scipy sage.rings.real_mpfr A = matrix(RR, 2, 2, [13,-4,-4,7]) A.norm() # rel tol 2e-16
Norms of numerical matrices over high-precision reals are computed by this routine. Faster routines for double precision entries from \(RDF\) or \(CDF\) are provided by the
Matrix_double_denseclass.sage: # needs sage.rings.real_mpfr sage.symbolic sage: A = matrix(CC, 2, 3, [3*I,4,1-I,1,2,0]) sage: A.norm('frob') 5.656854249492381 sage: A.norm(2) 5.470684443210... sage: A.norm(1) 6.0 sage: A.norm(Infinity) 8.414213562373096 sage: a = matrix([[],[],[],[]]) sage: a.norm() 0.0 sage: a.norm(Infinity) == a.norm(1) True
>>> from sage.all import * >>> # needs sage.rings.real_mpfr sage.symbolic >>> A = matrix(CC, Integer(2), Integer(3), [Integer(3)*I,Integer(4),Integer(1)-I,Integer(1),Integer(2),Integer(0)]) >>> A.norm('frob') 5.656854249492381 >>> A.norm(Integer(2)) 5.470684443210... >>> A.norm(Integer(1)) 6.0 >>> A.norm(Infinity) 8.414213562373096 >>> a = matrix([[],[],[],[]]) >>> a.norm() 0.0 >>> a.norm(Infinity) == a.norm(Integer(1)) True
# needs sage.rings.real_mpfr sage.symbolic A = matrix(CC, 2, 3, [3*I,4,1-I,1,2,0]) A.norm('frob') A.norm(2) A.norm(1) A.norm(Infinity) a = matrix([[],[],[],[]]) a.norm() a.norm(Infinity) == a.norm(1)
- nullity()[source]¶
Return the (left) nullity of this matrix, which is the dimension of the (left) kernel of this matrix acting from the right on row vectors.
EXAMPLES:
sage: M = Matrix(QQ, [[1,0,0,1], [0,1,1,0], [1,1,1,0]]) sage: M.nullity() 0 sage: M.left_nullity() 0
>>> from sage.all import * >>> M = Matrix(QQ, [[Integer(1),Integer(0),Integer(0),Integer(1)], [Integer(0),Integer(1),Integer(1),Integer(0)], [Integer(1),Integer(1),Integer(1),Integer(0)]]) >>> M.nullity() 0 >>> M.left_nullity() 0
M = Matrix(QQ, [[1,0,0,1], [0,1,1,0], [1,1,1,0]]) M.nullity() M.left_nullity()
sage: A = M.transpose() sage: A.nullity() 1 sage: A.left_nullity() 1
>>> from sage.all import * >>> A = M.transpose() >>> A.nullity() 1 >>> A.left_nullity() 1
A = M.transpose() A.nullity() A.left_nullity()
>>> from sage.all import * >>> A = M.transpose() >>> A.nullity() 1 >>> A.left_nullity() 1
A = M.transpose() A.nullity() A.left_nullity()
sage: M = M.change_ring(ZZ) sage: M.nullity() 0 sage: A = M.transpose() sage: A.nullity() 1
>>> from sage.all import * >>> M = M.change_ring(ZZ) >>> M.nullity() 0 >>> A = M.transpose() >>> A.nullity() 1
M = M.change_ring(ZZ) M.nullity() A = M.transpose() A.nullity()
>>> from sage.all import * >>> M = M.change_ring(ZZ) >>> M.nullity() 0 >>> A = M.transpose() >>> A.nullity() 1
M = M.change_ring(ZZ) M.nullity() A = M.transpose() A.nullity()
- numerical_approx(prec=None, digits=None, algorithm=None)[source]¶
Return a numerical approximation of
selfwithprecbits (or decimaldigits) of precision.INPUT:
prec– precision in bitsdigits– precision in decimal digits (only used ifprecis not given)algorithm– ignored for matrices
OUTPUT: a matrix converted to a real or complex field
EXAMPLES:
sage: # needs sage.symbolic sage: d = matrix([[3, 0], [0, sqrt(2)]]) sage: b = matrix([[1, -1], [2, 2]]); e = b * d * b.inverse(); e [ 1/2*sqrt(2) + 3/2 -1/4*sqrt(2) + 3/4] [ -sqrt(2) + 3 1/2*sqrt(2) + 3/2] sage: e.numerical_approx(53) [ 2.20710678118655 0.396446609406726] [ 1.58578643762690 2.20710678118655] sage: e.numerical_approx(20) [ 2.2071 0.39645] [ 1.5858 2.2071] sage: (e - I).numerical_approx(20) [2.2071 - 1.0000*I 0.39645] [ 1.5858 2.2071 - 1.0000*I]
>>> from sage.all import * >>> # needs sage.symbolic >>> d = matrix([[Integer(3), Integer(0)], [Integer(0), sqrt(Integer(2))]]) >>> b = matrix([[Integer(1), -Integer(1)], [Integer(2), Integer(2)]]); e = b * d * b.inverse(); e [ 1/2*sqrt(2) + 3/2 -1/4*sqrt(2) + 3/4] [ -sqrt(2) + 3 1/2*sqrt(2) + 3/2] >>> e.numerical_approx(Integer(53)) [ 2.20710678118655 0.396446609406726] [ 1.58578643762690 2.20710678118655] >>> e.numerical_approx(Integer(20)) [ 2.2071 0.39645] [ 1.5858 2.2071] >>> (e - I).numerical_approx(Integer(20)) [2.2071 - 1.0000*I 0.39645] [ 1.5858 2.2071 - 1.0000*I]
# needs sage.symbolic d = matrix([[3, 0], [0, sqrt(2)]]) b = matrix([[1, -1], [2, 2]]); e = b * d * b.inverse(); e e.numerical_approx(53) e.numerical_approx(20) (e - I).numerical_approx(20)
sage: M = matrix(QQ, 4, [i/(i+1) for i in range(12)]); M [ 0 1/2 2/3] [ 3/4 4/5 5/6] [ 6/7 7/8 8/9] [ 9/10 10/11 11/12]
>>> from sage.all import * >>> M = matrix(QQ, Integer(4), [i/(i+Integer(1)) for i in range(Integer(12))]); M [ 0 1/2 2/3] [ 3/4 4/5 5/6] [ 6/7 7/8 8/9] [ 9/10 10/11 11/12]
M = matrix(QQ, 4, [i/(i+1) for i in range(12)]); M
>>> from sage.all import * >>> M = matrix(QQ, Integer(4), [i/(i+Integer(1)) for i in range(Integer(12))]); M [ 0 1/2 2/3] [ 3/4 4/5 5/6] [ 6/7 7/8 8/9] [ 9/10 10/11 11/12]
M = matrix(QQ, 4, [i/(i+1) for i in range(12)]); M
sage: M.numerical_approx() [0.000000000000000 0.500000000000000 0.666666666666667] [0.750000000000000 0.800000000000000 0.833333333333333] [0.857142857142857 0.875000000000000 0.888888888888889] [0.900000000000000 0.909090909090909 0.916666666666667]
>>> from sage.all import * >>> M.numerical_approx() [0.000000000000000 0.500000000000000 0.666666666666667] [0.750000000000000 0.800000000000000 0.833333333333333] [0.857142857142857 0.875000000000000 0.888888888888889] [0.900000000000000 0.909090909090909 0.916666666666667]
M.numerical_approx()
>>> from sage.all import * >>> M.numerical_approx() [0.000000000000000 0.500000000000000 0.666666666666667] [0.750000000000000 0.800000000000000 0.833333333333333] [0.857142857142857 0.875000000000000 0.888888888888889] [0.900000000000000 0.909090909090909 0.916666666666667]
M.numerical_approx()
sage: matrix(SR, 2, 2, range(4)).n() # needs sage.symbolic [0.000000000000000 1.00000000000000] [ 2.00000000000000 3.00000000000000]
>>> from sage.all import * >>> matrix(SR, Integer(2), Integer(2), range(Integer(4))).n() # needs sage.symbolic [0.000000000000000 1.00000000000000] [ 2.00000000000000 3.00000000000000]
matrix(SR, 2, 2, range(4)).n() # needs sage.symbolic
>>> from sage.all import * >>> matrix(SR, Integer(2), Integer(2), range(Integer(4))).n() # needs sage.symbolic [0.000000000000000 1.00000000000000] [ 2.00000000000000 3.00000000000000]
matrix(SR, 2, 2, range(4)).n() # needs sage.symbolic
sage: numerical_approx(M) [0.000000000000000 0.500000000000000 0.666666666666667] [0.750000000000000 0.800000000000000 0.833333333333333] [0.857142857142857 0.875000000000000 0.888888888888889] [0.900000000000000 0.909090909090909 0.916666666666667]
>>> from sage.all import * >>> numerical_approx(M) [0.000000000000000 0.500000000000000 0.666666666666667] [0.750000000000000 0.800000000000000 0.833333333333333] [0.857142857142857 0.875000000000000 0.888888888888889] [0.900000000000000 0.909090909090909 0.916666666666667]
numerical_approx(M)
>>> from sage.all import * >>> numerical_approx(M) [0.000000000000000 0.500000000000000 0.666666666666667] [0.750000000000000 0.800000000000000 0.833333333333333] [0.857142857142857 0.875000000000000 0.888888888888889] [0.900000000000000 0.909090909090909 0.916666666666667]
numerical_approx(M)
We check that Issue #29700 is fixed:
sage: M = matrix(3, [1,1,1,1,0,0,0,1,0]) sage: A, B = M.diagonalization(QQbar) # needs sage.rings.number_field sage: _ = A.n() # needs sage.rings.number_field
>>> from sage.all import * >>> M = matrix(Integer(3), [Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(0)]) >>> A, B = M.diagonalization(QQbar) # needs sage.rings.number_field >>> _ = A.n() # needs sage.rings.number_field
M = matrix(3, [1,1,1,1,0,0,0,1,0]) A, B = M.diagonalization(QQbar) # needs sage.rings.number_field _ = A.n() # needs sage.rings.number_field
- permanent(algorithm='Ryser')[source]¶
Return the permanent of this matrix.
Let \(A = (a_{i,j})\) be an \(m \times n\) matrix over any commutative ring with \(m \le n\). The permanent of \(A\) is
\[\mathrm{per}(A) = \sum_\pi a_{1,\pi(1)} a_{2,\pi(2)} \cdots a_{m,\pi(m)}\]where the summation extends over all one-to-one functions \(\pi\) from \(\{1, \ldots, m\}\) to \(\{1, \ldots, n\}\).
The product \(a_{1,\pi(1)} a_{2,\pi(2)} \cdots a_{m,\pi(m)}\) is called diagonal product. So the permanent of an \(m \times n\) matrix \(A\) is the sum of all the diagonal products of \(A\).
By default, this method uses Ryser’s algorithm, but setting
algorithmto “ButeraPernici” you can use the algorithm of Butera and Pernici (which is well suited for band matrices, i.e. matrices whose entries are concentrated near the diagonal).INPUT:
A– matrix of size \(m \times n\) with \(m \leq n\)algorithm– either “Ryser” (default) or “ButeraPernici”. The Butera-Pernici algorithm takes advantage of presence of zeros and is very well suited for sparse matrices.
ALGORITHM:
The Ryser algorithm is implemented in the method
_permanent_ryser(). It is a modification of theorem 7.1.1. from Brualdi and Ryser: Combinatorial Matrix Theory. Instead of deleting columns from \(A\), we choose columns from \(A\) and calculate the product of the row sums of the selected submatrix.The Butera-Pernici algorithm is implemented in the function
permanental_minor_polynomial(). It takes advantage of cancellations that may occur in the computations.EXAMPLES:
sage: A = ones_matrix(4,4) sage: A.permanent() 24 sage: A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) sage: A.permanent() 36 sage: B = A.change_ring(RR) sage: B.permanent() 36.0000000000000
>>> from sage.all import * >>> A = ones_matrix(Integer(4),Integer(4)) >>> A.permanent() 24 >>> A = matrix(Integer(3),Integer(6), [Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1)]) >>> A.permanent() 36 >>> B = A.change_ring(RR) >>> B.permanent() 36.0000000000000
A = ones_matrix(4,4) A.permanent() A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) A.permanent() B = A.change_ring(RR) B.permanent()
The permanent above is directed to the Sloane’s sequence OEIS sequence A079908 (“The Dancing School Problems”) for which the third term is 36:
sage: oeis(79908) # optional -- internet A079908: Solution to the Dancing School Problem with 3 girls and n+3 boys: f(3,n). sage: _(3) # optional -- internet 36
>>> from sage.all import * >>> oeis(Integer(79908)) # optional -- internet A079908: Solution to the Dancing School Problem with 3 girls and n+3 boys: f(3,n). >>> _(Integer(3)) # optional -- internet 36
oeis(79908) # optional -- internet _(3) # optional -- internet
sage: A = matrix(4,5, [1,1,0,1,1,0,1,1,1,1,1,0,1,0,1,1,1,0,1,0]) sage: A.permanent() 32
>>> from sage.all import * >>> A = matrix(Integer(4),Integer(5), [Integer(1),Integer(1),Integer(0),Integer(1),Integer(1),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(1),Integer(0),Integer(1),Integer(1),Integer(1),Integer(0),Integer(1),Integer(0)]) >>> A.permanent() 32
A = matrix(4,5, [1,1,0,1,1,0,1,1,1,1,1,0,1,0,1,1,1,0,1,0]) A.permanent()
>>> from sage.all import * >>> A = matrix(Integer(4),Integer(5), [Integer(1),Integer(1),Integer(0),Integer(1),Integer(1),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(1),Integer(0),Integer(1),Integer(1),Integer(1),Integer(0),Integer(1),Integer(0)]) >>> A.permanent() 32
A = matrix(4,5, [1,1,0,1,1,0,1,1,1,1,1,0,1,0,1,1,1,0,1,0]) A.permanent()
A huge permanent that cannot be reasonably computed with the Ryser algorithm (a \(50 \times 50\) band matrix with width \(5\)):
sage: n, w = 50, 5 sage: A = matrix(ZZ, n, n, lambda i,j: (i+j)%5 + 1 if abs(i-j) <= w else 0) sage: A.permanent(algorithm='ButeraPernici') 57766972735511097036962481710892268404670105604676932908
>>> from sage.all import * >>> n, w = Integer(50), Integer(5) >>> A = matrix(ZZ, n, n, lambda i,j: (i+j)%Integer(5) + Integer(1) if abs(i-j) <= w else Integer(0)) >>> A.permanent(algorithm='ButeraPernici') 57766972735511097036962481710892268404670105604676932908
n, w = 50, 5 A = matrix(ZZ, n, n, lambda i,j: (i+j)%5 + 1 if abs(i-j) <= w else 0) A.permanent(algorithm='ButeraPernici')
See Minc: Permanents, Example 2.1, p. 5.
sage: A = matrix(QQ, 2,2, [1/5,2/7,3/2,4/5]) sage: A.permanent() 103/175
>>> from sage.all import * >>> A = matrix(QQ, Integer(2),Integer(2), [Integer(1)/Integer(5),Integer(2)/Integer(7),Integer(3)/Integer(2),Integer(4)/Integer(5)]) >>> A.permanent() 103/175
A = matrix(QQ, 2,2, [1/5,2/7,3/2,4/5]) A.permanent()
sage: R.<a> = PolynomialRing(ZZ) sage: A = matrix(R, 2,2, [a,1,a,a+1]) sage: A.permanent() a^2 + 2*a
>>> from sage.all import * >>> R = PolynomialRing(ZZ, names=('a',)); (a,) = R._first_ngens(1) >>> A = matrix(R, Integer(2),Integer(2), [a,Integer(1),a,a+Integer(1)]) >>> A.permanent() a^2 + 2*a
R.<a> = PolynomialRing(ZZ) A = matrix(R, 2,2, [a,1,a,a+1]) A.permanent()
>>> from sage.all import * >>> R = PolynomialRing(ZZ, names=('a',)); (a,) = R._first_ngens(1) >>> A = matrix(R, Integer(2),Integer(2), [a,Integer(1),a,a+Integer(1)]) >>> A.permanent() a^2 + 2*a
R.<a> = PolynomialRing(ZZ) A = matrix(R, 2,2, [a,1,a,a+1]) A.permanent()
sage: R.<x,y> = PolynomialRing(ZZ, 2) sage: A = matrix(R, 2,2, [x, y, x^2, y^2]) sage: A.permanent() x^2*y + x*y^2
>>> from sage.all import * >>> R = PolynomialRing(ZZ, Integer(2), names=('x', 'y',)); (x, y,) = R._first_ngens(2) >>> A = matrix(R, Integer(2),Integer(2), [x, y, x**Integer(2), y**Integer(2)]) >>> A.permanent() x^2*y + x*y^2
R.<x,y> = PolynomialRing(ZZ, 2) A = matrix(R, 2,2, [x, y, x^2, y^2]) A.permanent()
>>> from sage.all import * >>> R = PolynomialRing(ZZ, Integer(2), names=('x', 'y',)); (x, y,) = R._first_ngens(2) >>> A = matrix(R, Integer(2),Integer(2), [x, y, x**Integer(2), y**Integer(2)]) >>> A.permanent() x^2*y + x*y^2
R.<x,y> = PolynomialRing(ZZ, 2) A = matrix(R, 2,2, [x, y, x^2, y^2]) A.permanent()
- permanental_minor(k, algorithm='Ryser')[source]¶
Return the permanental \(k\)-minor of this matrix.
The permanental \(k\)-minor of a matrix \(A\) is the sum of the permanents of all possible \(k\) by \(k\) submatrices of \(A\). Note that the maximal permanental minor is just the permanent.
For a (0,1)-matrix \(A\) the permanental \(k\)-minor counts the number of different selections of \(k\) 1s of \(A\) with no two of the 1s on the same row and no two of the 1s on the same column.
See Brualdi and Ryser: Combinatorial Matrix Theory, p. 203. Note the typo \(p_0(A) = 0\) in that reference! For applications see Theorem 7.2.1 and Theorem 7.2.4.
See also
The method
rook_vector()returns the list of all permanental minors.INPUT:
k– the size of the minoralgorithm– either “Ryser” (default) or “ButeraPernici”; the Butera-Pernici algorithm is well suited for band matrices
EXAMPLES:
sage: A = matrix(4, [1,0,1,0,1,0,1,0,1,0,10,10,1,0,1,1]) sage: A.permanental_minor(2) 114
>>> from sage.all import * >>> A = matrix(Integer(4), [Integer(1),Integer(0),Integer(1),Integer(0),Integer(1),Integer(0),Integer(1),Integer(0),Integer(1),Integer(0),Integer(10),Integer(10),Integer(1),Integer(0),Integer(1),Integer(1)]) >>> A.permanental_minor(Integer(2)) 114
A = matrix(4, [1,0,1,0,1,0,1,0,1,0,10,10,1,0,1,1]) A.permanental_minor(2)
sage: A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) sage: A.permanental_minor(0) 1 sage: A.permanental_minor(1) 12 sage: A.permanental_minor(2) 40 sage: A.permanental_minor(3) 36
>>> from sage.all import * >>> A = matrix(Integer(3),Integer(6), [Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1)]) >>> A.permanental_minor(Integer(0)) 1 >>> A.permanental_minor(Integer(1)) 12 >>> A.permanental_minor(Integer(2)) 40 >>> A.permanental_minor(Integer(3)) 36
A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) A.permanental_minor(0) A.permanental_minor(1) A.permanental_minor(2) A.permanental_minor(3)
>>> from sage.all import * >>> A = matrix(Integer(3),Integer(6), [Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1)]) >>> A.permanental_minor(Integer(0)) 1 >>> A.permanental_minor(Integer(1)) 12 >>> A.permanental_minor(Integer(2)) 40 >>> A.permanental_minor(Integer(3)) 36
A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) A.permanental_minor(0) A.permanental_minor(1) A.permanental_minor(2) A.permanental_minor(3)
Note that if \(k = m = n\), the permanental \(k\)-minor equals \(\mathrm{per}(A)\):
sage: A.permanent() 36
>>> from sage.all import * >>> A.permanent() 36
A.permanent()
The permanental minors of the “complement” matrix of \(A\) is related to the permanent of \(A\):
sage: m, n = 3, 6 sage: C = matrix(m, n, lambda i,j: 1 - A[i,j]) sage: sum((-1)^k * C.permanental_minor(k)*factorial(n-k)/factorial(n-m) ....: for k in range(m+1)) 36
>>> from sage.all import * >>> m, n = Integer(3), Integer(6) >>> C = matrix(m, n, lambda i,j: Integer(1) - A[i,j]) >>> sum((-Integer(1))**k * C.permanental_minor(k)*factorial(n-k)/factorial(n-m) ... for k in range(m+Integer(1))) 36
m, n = 3, 6 C = matrix(m, n, lambda i,j: 1 - A[i,j]) sum((-1)^k * C.permanental_minor(k)*factorial(n-k)/factorial(n-m) for k in range(m+1))See Theorem 7.2.1 of Brualdi and Ryser: Combinatorial Matrix Theory: per(A)
- permutation_normal_form(check=False)[source]¶
Take the set of matrices that are
selfpermuted by any row and column permutation, and return the maximal one of the set where matrices are ordered lexicographically going along each row.INPUT:
check– boolean (default:False); ifTruereturn a tuple of the maximal matrix and the permutations takingselfto the maximal matrix. IfFalse, return only the maximal matrix.
OUTPUT: the maximal matrix
EXAMPLES:
sage: M = matrix(ZZ, [[0, 0, 1], [1, 0, 2], [0, 0, 0]]) sage: M [0 0 1] [1 0 2] [0 0 0] sage: M.permutation_normal_form() [2 1 0] [1 0 0] [0 0 0] sage: M = matrix(ZZ, [[-1, 3], [-1, 5], [2, 4]]) sage: M [-1 3] [-1 5] [ 2 4] sage: M.permutation_normal_form(check=True) # needs sage.graphs sage.groups ( [ 5 -1] [ 4 2] [ 3 -1], ((1,2,3), (1,2)) )
>>> from sage.all import * >>> M = matrix(ZZ, [[Integer(0), Integer(0), Integer(1)], [Integer(1), Integer(0), Integer(2)], [Integer(0), Integer(0), Integer(0)]]) >>> M [0 0 1] [1 0 2] [0 0 0] >>> M.permutation_normal_form() [2 1 0] [1 0 0] [0 0 0] >>> M = matrix(ZZ, [[-Integer(1), Integer(3)], [-Integer(1), Integer(5)], [Integer(2), Integer(4)]]) >>> M [-1 3] [-1 5] [ 2 4] >>> M.permutation_normal_form(check=True) # needs sage.graphs sage.groups ( [ 5 -1] [ 4 2] [ 3 -1], ((1,2,3), (1,2)) )
M = matrix(ZZ, [[0, 0, 1], [1, 0, 2], [0, 0, 0]]) M M.permutation_normal_form() M = matrix(ZZ, [[-1, 3], [-1, 5], [2, 4]]) M M.permutation_normal_form(check=True) # needs sage.graphs sage.groups
- pfaffian(algorithm=None, check=True)[source]¶
Return the Pfaffian of
self, assuming thatselfis an alternating matrix.The result is cached.
INPUT:
algorithm– string (default:None); the algorithm to use. Currently the following algorithms have been implemented:'bfl'– using the Bär-Faddeev-LeVerrier algorithm'definition'– using the definition given by perfect matchings
check– boolean (default:True); whether to checkselffor alternatingness and squareness. This has to be set toFalseifselfis defined over a non-discrete ring.
The Pfaffian of an alternating matrix is defined as follows:
Let \(A\) be an alternating \(k \times k\) matrix over a commutative ring. (Here, “alternating” means that \(A^T = -A\) and that the diagonal entries of \(A\) are zero.) If \(k\) is odd, then the Pfaffian of the matrix \(A\) is defined to be \(0\). Let us now define it when \(k\) is even. In this case, set \(n = k/2\) (this is an integer). For every \(i\) and \(j\), we denote the \((i, j)\)-th entry of \(A\) by \(a_{i, j}\). Let \(M\) denote the set of all perfect matchings of the set \(\{ 1, 2, \ldots, 2n \}\) (see
sage.combinat.perfect_matching.PerfectMatchings). For every matching \(m \in M\), define the sign \(\mathrm{sign}(m)\) of \(m\) by writing \(m\) as \(\{ \{ i_1, j_1 \}, \{ i_2, j_2 \}, \ldots, \{ i_n, j_n \} \}\) with \(i_k < j_k\) for all \(k\), and setting \(\mathrm{sign}(m)\) to be the sign of the permutation \(( i_1, j_1, i_2, j_2, \ldots, i_n, j_n )\) (written here in one-line notation). For every matching \(m \in M\), define the weight \(w(m)\) of \(m\) by writing \(m\) as \(\{ \{ i_1, j_1 \}, \{ i_2, j_2 \}, \ldots, \{ i_n, j_n \} \}\) with \(i_k < j_k\) for all \(k\), and setting \(w(m) = a_{i_1, j_1} a_{i_2, j_2} \cdots a_{i_n, j_n}\). Now, the Pfaffian of the matrix \(A\) is defined to be the sum\[\sum_{m \in M} \mathrm{sign}(m) w(m).\]The Pfaffian of \(A\) is commonly denoted by \(\mathrm{Pf}(A)\). It is well-known that \((\mathrm{Pf}(A))^2 = \det A\) for every alternating matrix \(A\), and that \(\mathrm{Pf} (U^T A U) = \det U \cdot \mathrm{Pf}(A)\) for any \(n \times n\) matrix \(U\) and any alternating \(n \times n\) matrix \(A\).
See [Knu1995], [DW1995] and [Rot2001], [Baer2020], just to name a few sources, for further properties of Pfaffians.
ALGORITHM:
If the matrix is small, namely up to size \(4 \times 4\), the naive formulas are always used.
The Bär-Faddeev-LeVerrier algorithm can be accessed using
'bfl'. It works over any \(\QQ\)-algebra or ring whose fraction field is an \(\QQ\)-algebra (see [Baer2020] for details). If that check fails, the implementation raises an error because correct results cannot be guaranteed.To access the algorithm using the above definition, use
'definition'. However, notice that this algorithm is usually very slow.By default, i.e. if no options are set, the implementation tries to apply the BFL algorithm first. If BFL is not applicable, it uses the definition by perfect matchings.
The alternatingness of the matrix
selfis checked only ifcheckisTrue(this is important because even ifselfis alternating, a non-discrete base ring might prevent Sage from being able to check this).EXAMPLES:
A \(3 \times 3\) alternating matrix has Pfaffian 0 independently of its entries:
sage: MSp = MatrixSpace(Integers(27), 3) sage: A = MSp([0, 2, -3, -2, 0, 8, 3, -8, 0]) sage: A.pfaffian() 0 sage: parent(A.pfaffian()) Ring of integers modulo 27
>>> from sage.all import * >>> MSp = MatrixSpace(Integers(Integer(27)), Integer(3)) >>> A = MSp([Integer(0), Integer(2), -Integer(3), -Integer(2), Integer(0), Integer(8), Integer(3), -Integer(8), Integer(0)]) >>> A.pfaffian() 0 >>> parent(A.pfaffian()) Ring of integers modulo 27
MSp = MatrixSpace(Integers(27), 3) A = MSp([0, 2, -3, -2, 0, 8, 3, -8, 0]) A.pfaffian() parent(A.pfaffian())
The Pfaffian of a \(2 \times 2\) alternating matrix is just its northeast entry:
sage: MSp = MatrixSpace(QQ, 2) sage: A = MSp([0, 4, -4, 0]) sage: A.pfaffian() 4 sage: parent(A.pfaffian()) Rational Field
>>> from sage.all import * >>> MSp = MatrixSpace(QQ, Integer(2)) >>> A = MSp([Integer(0), Integer(4), -Integer(4), Integer(0)]) >>> A.pfaffian() 4 >>> parent(A.pfaffian()) Rational Field
MSp = MatrixSpace(QQ, 2) A = MSp([0, 4, -4, 0]) A.pfaffian() parent(A.pfaffian())
The Pfaffian of a \(0 \times 0\) alternating matrix is \(1\):
sage: MSp = MatrixSpace(ZZ, 0) sage: A = MSp([]) sage: A.pfaffian() 1 sage: parent(A.pfaffian()) Integer Ring
>>> from sage.all import * >>> MSp = MatrixSpace(ZZ, Integer(0)) >>> A = MSp([]) >>> A.pfaffian() 1 >>> parent(A.pfaffian()) Integer Ring
MSp = MatrixSpace(ZZ, 0) A = MSp([]) A.pfaffian() parent(A.pfaffian())
Let us compute the Pfaffian of a generic \(4 \times 4\) alternating matrix:
sage: R = PolynomialRing(QQ, 'x12,x13,x14,x23,x24,x34') sage: x12, x13, x14, x23, x24, x34 = R.gens() sage: A = matrix(R, [[ 0, x12, x13, x14], ....: [-x12, 0, x23, x24], ....: [-x13, -x23, 0, x34], ....: [-x14, -x24, -x34, 0]]) sage: A.pfaffian() x14*x23 - x13*x24 + x12*x34 sage: parent(A.pfaffian()) Multivariate Polynomial Ring in x12, x13, x14, x23, x24, x34 over Rational Field
>>> from sage.all import * >>> R = PolynomialRing(QQ, 'x12,x13,x14,x23,x24,x34') >>> x12, x13, x14, x23, x24, x34 = R.gens() >>> A = matrix(R, [[ Integer(0), x12, x13, x14], ... [-x12, Integer(0), x23, x24], ... [-x13, -x23, Integer(0), x34], ... [-x14, -x24, -x34, Integer(0)]]) >>> A.pfaffian() x14*x23 - x13*x24 + x12*x34 >>> parent(A.pfaffian()) Multivariate Polynomial Ring in x12, x13, x14, x23, x24, x34 over Rational Field
R = PolynomialRing(QQ, 'x12,x13,x14,x23,x24,x34') x12, x13, x14, x23, x24, x34 = R.gens() A = matrix(R, [[ 0, x12, x13, x14], [-x12, 0, x23, x24], [-x13, -x23, 0, x34], [-x14, -x24, -x34, 0]]) A.pfaffian() parent(A.pfaffian())The Pfaffian of an alternating matrix squares to its determinant:
sage: A = [[0] * 6 for i in range(6)] sage: for i in range(6): ....: for j in range(i): ....: u = floor(random() * 10) ....: A[i][j] = u ....: A[j][i] = -u ....: A[i][i] = 0 sage: AA = Matrix(ZZ, A) sage: AA.pfaffian() ** 2 == AA.det() True
>>> from sage.all import * >>> A = [[Integer(0)] * Integer(6) for i in range(Integer(6))] >>> for i in range(Integer(6)): ... for j in range(i): ... u = floor(random() * Integer(10)) ... A[i][j] = u ... A[j][i] = -u ... A[i][i] = Integer(0) >>> AA = Matrix(ZZ, A) >>> AA.pfaffian() ** Integer(2) == AA.det() True
A = [[0] * 6 for i in range(6)] for i in range(6): for j in range(i): u = floor(random() * 10) A[i][j] = u A[j][i] = -u A[i][i] = 0 AA = Matrix(ZZ, A) AA.pfaffian() ** 2 == AA.det()In order to use the Bär-Faddeev-LeVerrier algorithm, the base ring must have characteristic zero:
sage: A = matrix(GF(5), [(0, 3, 4, 1, 3, 4), ....: (2, 0, 2, 0, 1, 0), ....: (1, 3, 0, 4, 1, 0), ....: (4, 0, 1, 0, 2, 0), ....: (2, 4, 4, 3, 0, 0), ....: (1, 0, 0, 0, 0, 0)]) sage: A.pfaffian(algorithm='bfl') Traceback (most recent call last): ... TypeError: Bär-Faddeev-LeVerrier algorithm not applicable, use another algorithm instead
>>> from sage.all import * >>> A = matrix(GF(Integer(5)), [(Integer(0), Integer(3), Integer(4), Integer(1), Integer(3), Integer(4)), ... (Integer(2), Integer(0), Integer(2), Integer(0), Integer(1), Integer(0)), ... (Integer(1), Integer(3), Integer(0), Integer(4), Integer(1), Integer(0)), ... (Integer(4), Integer(0), Integer(1), Integer(0), Integer(2), Integer(0)), ... (Integer(2), Integer(4), Integer(4), Integer(3), Integer(0), Integer(0)), ... (Integer(1), Integer(0), Integer(0), Integer(0), Integer(0), Integer(0))]) >>> A.pfaffian(algorithm='bfl') Traceback (most recent call last): ... TypeError: Bär-Faddeev-LeVerrier algorithm not applicable, use another algorithm instead
A = matrix(GF(5), [(0, 3, 4, 1, 3, 4), (2, 0, 2, 0, 1, 0), (1, 3, 0, 4, 1, 0), (4, 0, 1, 0, 2, 0), (2, 4, 4, 3, 0, 0), (1, 0, 0, 0, 0, 0)]) A.pfaffian(algorithm='bfl')In that case, the definition by perfect matchings is used instead:
sage: A.pfaffian() # needs sage.combinat 2
>>> from sage.all import * >>> A.pfaffian() # needs sage.combinat 2
A.pfaffian() # needs sage.combinat
- pivot_rows()[source]¶
Return the pivot row positions for this matrix, which are a topmost subset of the rows that span the row space and are linearly independent.
OUTPUT: a tuple of integers
EXAMPLES:
sage: A = matrix(QQ, 3,3, [0,0,0,1,2,3,2,4,6]); A [0 0 0] [1 2 3] [2 4 6] sage: A.pivot_rows() (1,) sage: A.pivot_rows() # testing cached value (1,)
>>> from sage.all import * >>> A = matrix(QQ, Integer(3),Integer(3), [Integer(0),Integer(0),Integer(0),Integer(1),Integer(2),Integer(3),Integer(2),Integer(4),Integer(6)]); A [0 0 0] [1 2 3] [2 4 6] >>> A.pivot_rows() (1,) >>> A.pivot_rows() # testing cached value (1,)
A = matrix(QQ, 3,3, [0,0,0,1,2,3,2,4,6]); A A.pivot_rows() A.pivot_rows() # testing cached value
- plot(*args, **kwds)[source]¶
A plot of this matrix.
Each (ith, jth) matrix element is given a different color value depending on its relative size compared to the other elements in the matrix.
The tick marks drawn on the frame axes denote the (ith, jth) element of the matrix.
This method just calls
matrix_plot.*argsand**kwdsare passed tomatrix_plot.EXAMPLES:
A matrix over ZZ colored with different grey levels:
sage: A = matrix([[1,3,5,1],[2,4,5,6],[1,3,5,7]]) sage: A.plot() # needs sage.plot Graphics object consisting of 1 graphics primitive
>>> from sage.all import * >>> A = matrix([[Integer(1),Integer(3),Integer(5),Integer(1)],[Integer(2),Integer(4),Integer(5),Integer(6)],[Integer(1),Integer(3),Integer(5),Integer(7)]]) >>> A.plot() # needs sage.plot Graphics object consisting of 1 graphics primitive
A = matrix([[1,3,5,1],[2,4,5,6],[1,3,5,7]]) A.plot() # needs sage.plot
Here we make a random matrix over
RRand usecmap='hsv'to color the matrix elements different RGB colors (see documentation formatrix_plotfor more information on cmaps):sage: A = random_matrix(RDF, 50) sage: plot(A, cmap='hsv') # needs sage.plot Graphics object consisting of 1 graphics primitive
>>> from sage.all import * >>> A = random_matrix(RDF, Integer(50)) >>> plot(A, cmap='hsv') # needs sage.plot Graphics object consisting of 1 graphics primitive
A = random_matrix(RDF, 50) plot(A, cmap='hsv') # needs sage.plot
Another random plot, but over GF(389):
sage: A = random_matrix(GF(389), 10) sage: A.plot(cmap='Oranges') # needs sage.plot Graphics object consisting of 1 graphics primitive
>>> from sage.all import * >>> A = random_matrix(GF(Integer(389)), Integer(10)) >>> A.plot(cmap='Oranges') # needs sage.plot Graphics object consisting of 1 graphics primitive
A = random_matrix(GF(389), 10) A.plot(cmap='Oranges') # needs sage.plot
- principal_square_root(check_positivity=True)[source]¶
Return the principal square root of a positive definite matrix.
A positive definite matrix \(A\) has a unique positive definite matrix \(M\) such that \(M^2 = A\).
See Wikipedia article Square_root_of_a_matrix.
EXAMPLES:
sage: A = Matrix([[1,-1/2,0], [-1/2,1,-1/2], [0,-1/2,1]]) sage: B = A.principal_square_root() sage: A == B^2 True
>>> from sage.all import * >>> A = Matrix([[Integer(1),-Integer(1)/Integer(2),Integer(0)], [-Integer(1)/Integer(2),Integer(1),-Integer(1)/Integer(2)], [Integer(0),-Integer(1)/Integer(2),Integer(1)]]) >>> B = A.principal_square_root() >>> A == B**Integer(2) True
A = Matrix([[1,-1/2,0], [-1/2,1,-1/2], [0,-1/2,1]]) B = A.principal_square_root() A == B^2
- prod_of_row_sums(cols)[source]¶
Calculate the product of all row sums of a submatrix of \(A\) for a list of selected columns
cols.EXAMPLES:
sage: a = matrix(QQ, 2, 2, [1,2,3,2]); a [1 2] [3 2] sage: a.prod_of_row_sums([0,1]) 15
>>> from sage.all import * >>> a = matrix(QQ, Integer(2), Integer(2), [Integer(1),Integer(2),Integer(3),Integer(2)]); a [1 2] [3 2] >>> a.prod_of_row_sums([Integer(0),Integer(1)]) 15
a = matrix(QQ, 2, 2, [1,2,3,2]); a a.prod_of_row_sums([0,1])
Another example:
sage: a = matrix(QQ, 2,3, [1,2,3,2,5,6]); a [1 2 3] [2 5 6] sage: a.prod_of_row_sums([1,2]) 55
>>> from sage.all import * >>> a = matrix(QQ, Integer(2),Integer(3), [Integer(1),Integer(2),Integer(3),Integer(2),Integer(5),Integer(6)]); a [1 2 3] [2 5 6] >>> a.prod_of_row_sums([Integer(1),Integer(2)]) 55
a = matrix(QQ, 2,3, [1,2,3,2,5,6]); a a.prod_of_row_sums([1,2])
- pseudoinverse(algorithm=None)[source]¶
Return the Moore-Penrose pseudoinverse of this matrix.
INPUT:
algorithm– (default: guess) one of the following:'numpy'– use numpy’slinalg.pinv()which is suitable over real or complex fields'exact'– use a simple algorithm which is not numerically stable but useful over exact fields. Assume that no conjugation is needed, that the conjugate transpose is just the transpose.'exactconj'– likeexactbut use the conjugate transpose
OUTPUT: a matrix
EXAMPLES:
sage: # needs sage.rings.complex_double sage.symbolic sage: M = diagonal_matrix(CDF, [0, I, 1+I]); M [ 0.0 0.0 0.0] [ 0.0 1.0*I 0.0] [ 0.0 0.0 1.0 + 1.0*I] sage: M.pseudoinverse() # tol 1e-15 [ 0.0 0.0 0.0] [ 0.0 -1.0*I 0.0] [ 0.0 0.0 0.5 - 0.5*I]
>>> from sage.all import * >>> # needs sage.rings.complex_double sage.symbolic >>> M = diagonal_matrix(CDF, [Integer(0), I, Integer(1)+I]); M [ 0.0 0.0 0.0] [ 0.0 1.0*I 0.0] [ 0.0 0.0 1.0 + 1.0*I] >>> M.pseudoinverse() # tol 1e-15 [ 0.0 0.0 0.0] [ 0.0 -1.0*I 0.0] [ 0.0 0.0 0.5 - 0.5*I]
# needs sage.rings.complex_double sage.symbolic M = diagonal_matrix(CDF, [0, I, 1+I]); M M.pseudoinverse() # tol 1e-15
We check the properties of the pseudoinverse over an exact field:
sage: M = random_matrix(QQ, 6, 3) * random_matrix(QQ, 3, 5) sage: Mx = M.pseudoinverse() sage: M * Mx * M == M True sage: Mx * M * Mx == Mx True sage: (M * Mx).is_symmetric() True sage: (Mx * M).is_symmetric() True
>>> from sage.all import * >>> M = random_matrix(QQ, Integer(6), Integer(3)) * random_matrix(QQ, Integer(3), Integer(5)) >>> Mx = M.pseudoinverse() >>> M * Mx * M == M True >>> Mx * M * Mx == Mx True >>> (M * Mx).is_symmetric() True >>> (Mx * M).is_symmetric() True
M = random_matrix(QQ, 6, 3) * random_matrix(QQ, 3, 5) Mx = M.pseudoinverse() M * Mx * M == M Mx * M * Mx == Mx (M * Mx).is_symmetric() (Mx * M).is_symmetric()
Beware that the
exactalgorithm is not numerically stable, but the defaultnumpyalgorithm is:sage: M = matrix.hilbert(12, ring=RR) sage: (~M * M).norm() # a considerable error # needs scipy 1.3... sage: Mx = M.pseudoinverse(algorithm='exact') sage: (Mx * M).norm() # huge error # needs scipy 11.5... sage: Mx = M.pseudoinverse(algorithm='numpy') # needs numpy sage: (Mx * M).norm() # still OK 1.00...
>>> from sage.all import * >>> M = matrix.hilbert(Integer(12), ring=RR) >>> (~M * M).norm() # a considerable error # needs scipy 1.3... >>> Mx = M.pseudoinverse(algorithm='exact') >>> (Mx * M).norm() # huge error # needs scipy 11.5... >>> Mx = M.pseudoinverse(algorithm='numpy') # needs numpy >>> (Mx * M).norm() # still OK 1.00...
M = matrix.hilbert(12, ring=RR) (~M * M).norm() # a considerable error # needs scipy Mx = M.pseudoinverse(algorithm='exact') (Mx * M).norm() # huge error # needs scipy Mx = M.pseudoinverse(algorithm='numpy') # needs numpy (Mx * M).norm() # still OK
When multiplying the given matrix with the pseudoinverse, the result is symmetric for the
exactalgorithm or hermitian for theexactconjalgorithm:sage: # needs sage.rings.number_field sage.symbolic sage: M = matrix(QQbar, 2, 2, [1, sqrt(-3), -sqrt(-3), 3]) sage: M * M.pseudoinverse() [ 0.2500000000000000? 0.4330127018922193?*I] [-0.4330127018922193?*I 0.750000000000000?] sage: M * M.pseudoinverse(algorithm='exactconj') [ 1/4 0.4330127018922193?*I] [-0.4330127018922193?*I 3/4] sage: M * M.pseudoinverse(algorithm='exact') [ -1/2 0.866025403784439?*I] [0.866025403784439?*I 3/2]
>>> from sage.all import * >>> # needs sage.rings.number_field sage.symbolic >>> M = matrix(QQbar, Integer(2), Integer(2), [Integer(1), sqrt(-Integer(3)), -sqrt(-Integer(3)), Integer(3)]) >>> M * M.pseudoinverse() [ 0.2500000000000000? 0.4330127018922193?*I] [-0.4330127018922193?*I 0.750000000000000?] >>> M * M.pseudoinverse(algorithm='exactconj') [ 1/4 0.4330127018922193?*I] [-0.4330127018922193?*I 3/4] >>> M * M.pseudoinverse(algorithm='exact') [ -1/2 0.866025403784439?*I] [0.866025403784439?*I 3/2]
# needs sage.rings.number_field sage.symbolic M = matrix(QQbar, 2, 2, [1, sqrt(-3), -sqrt(-3), 3]) M * M.pseudoinverse() M * M.pseudoinverse(algorithm='exactconj') M * M.pseudoinverse(algorithm='exact')
For an invertible matrix, the pseudoinverse is just the inverse:
sage: M = matrix([[1,2], [3,4]]) sage: ~M [ -2 1] [ 3/2 -1/2] sage: M.pseudoinverse() [ -2 1] [ 3/2 -1/2]
>>> from sage.all import * >>> M = matrix([[Integer(1),Integer(2)], [Integer(3),Integer(4)]]) >>> ~M [ -2 1] [ 3/2 -1/2] >>> M.pseudoinverse() [ -2 1] [ 3/2 -1/2]
M = matrix([[1,2], [3,4]]) ~M M.pseudoinverse()
Numpy gives a strange answer due to rounding errors:
sage: M.pseudoinverse(algorithm='numpy') # random # needs numpy [-1286742750677287/643371375338643 1000799917193445/1000799917193444] [ 519646110850445/346430740566963 -300239975158034/600479950316067]
>>> from sage.all import * >>> M.pseudoinverse(algorithm='numpy') # random # needs numpy [-1286742750677287/643371375338643 1000799917193445/1000799917193444] [ 519646110850445/346430740566963 -300239975158034/600479950316067]
M.pseudoinverse(algorithm='numpy') # random # needs numpy
Although it is not too far off:
sage: (~M - M.pseudoinverse(algorithm='numpy')).norm() < 1e-14 # needs numpy True
>>> from sage.all import * >>> (~M - M.pseudoinverse(algorithm='numpy')).norm() < RealNumber('1e-14') # needs numpy True
(~M - M.pseudoinverse(algorithm='numpy')).norm() < 1e-14 # needs numpy
- qdet(q=None)[source]¶
Return the quantum deteminant of
self.The quantum determinant of a matrix \(M = (m_{ij})_{i,j=1}^n\) is defined by
\[\det_q(M) = \sum_{\sigma \in S_n} (-q)^{\ell(\sigma)} M_{\sigma(i),j},\]where \(S_n\) is the symmetric group on \(\{1, \ldots, n\}\) and \(\ell(\sigma)\) denotes the length of \(\sigma\) written as simple transpositions (equivalently the number of inversions when written in one-line notation).
INPUT:
q– the parameter \(q\); the default is \(q \in F[q]\), where \(F\) is the base ring ofself
EXAMPLES:
sage: A = matrix(SR, 2, lambda i, j: f'a{i}{j}'); A # needs sage.symbolic [a00 a01] [a10 a11] sage: A.quantum_determinant() # needs sage.symbolic -a01*a10*q + a00*a11 sage: A = matrix(SR, 3, lambda i, j: f'a{i}{j}') # needs sage.symbolic sage: A.quantum_determinant() # needs sage.symbolic -a02*a11*a20*q^3 + (a01*a12*a20 + a02*a10*a21)*q^2 + (-a00*a12*a21 - a01*a10*a22)*q + a00*a11*a22 sage: R.<q> = LaurentPolynomialRing(ZZ) sage: MS = MatrixSpace(Integers(8), 3) sage: A = MS([1,7,3, 1,1,1, 3,4,5]) sage: A.det() 6 sage: A.quantum_determinant(q^-2) 7*q^-6 + q^-4 + q^-2 + 5 sage: S.<x,y> = PolynomialRing(GF(7)) sage: R.<q> = LaurentPolynomialRing(S) sage: MS = MatrixSpace(S, 3, sparse=True) sage: A = MS([[x, y, 3], [4, 2+y, x^2], [0, 1-x, x+y]]) sage: A.det() x^4 - x^3 + x^2*y + x*y^2 + 2*x^2 - 2*x*y + 3*y^2 + 2*x - 2 sage: A.quantum_determinant() (2*x - 2)*q^2 + (x^4 - x^3 + 3*x*y + 3*y^2)*q + x^2*y + x*y^2 + 2*x^2 + 2*x*y sage: A.quantum_determinant(int(2)) 2*x^4 - 2*x^3 + x^2*y + x*y^2 + 2*x^2 + x*y - y^2 + x - 1 sage: A.quantum_determinant(q*x + q^-1*y) (2*x*y^2 - 2*y^2)*q^-2 + (x^4*y - x^3*y + 3*x*y^2 + 3*y^3)*q^-1 + (-2*x^2*y + x*y^2 + 2*x^2 - 2*x*y) + (x^5 - x^4 + 3*x^2*y + 3*x*y^2)*q + (2*x^3 - 2*x^2)*q^2
>>> from sage.all import * >>> A = matrix(SR, Integer(2), lambda i, j: f'a{i}{j}'); A # needs sage.symbolic [a00 a01] [a10 a11] >>> A.quantum_determinant() # needs sage.symbolic -a01*a10*q + a00*a11 >>> A = matrix(SR, Integer(3), lambda i, j: f'a{i}{j}') # needs sage.symbolic >>> A.quantum_determinant() # needs sage.symbolic -a02*a11*a20*q^3 + (a01*a12*a20 + a02*a10*a21)*q^2 + (-a00*a12*a21 - a01*a10*a22)*q + a00*a11*a22 >>> R = LaurentPolynomialRing(ZZ, names=('q',)); (q,) = R._first_ngens(1) >>> MS = MatrixSpace(Integers(Integer(8)), Integer(3)) >>> A = MS([Integer(1),Integer(7),Integer(3), Integer(1),Integer(1),Integer(1), Integer(3),Integer(4),Integer(5)]) >>> A.det() 6 >>> A.quantum_determinant(q**-Integer(2)) 7*q^-6 + q^-4 + q^-2 + 5 >>> S = PolynomialRing(GF(Integer(7)), names=('x', 'y',)); (x, y,) = S._first_ngens(2) >>> R = LaurentPolynomialRing(S, names=('q',)); (q,) = R._first_ngens(1) >>> MS = MatrixSpace(S, Integer(3), sparse=True) >>> A = MS([[x, y, Integer(3)], [Integer(4), Integer(2)+y, x**Integer(2)], [Integer(0), Integer(1)-x, x+y]]) >>> A.det() x^4 - x^3 + x^2*y + x*y^2 + 2*x^2 - 2*x*y + 3*y^2 + 2*x - 2 >>> A.quantum_determinant() (2*x - 2)*q^2 + (x^4 - x^3 + 3*x*y + 3*y^2)*q + x^2*y + x*y^2 + 2*x^2 + 2*x*y >>> A.quantum_determinant(int(Integer(2))) 2*x^4 - 2*x^3 + x^2*y + x*y^2 + 2*x^2 + x*y - y^2 + x - 1 >>> A.quantum_determinant(q*x + q**-Integer(1)*y) (2*x*y^2 - 2*y^2)*q^-2 + (x^4*y - x^3*y + 3*x*y^2 + 3*y^3)*q^-1 + (-2*x^2*y + x*y^2 + 2*x^2 - 2*x*y) + (x^5 - x^4 + 3*x^2*y + 3*x*y^2)*q + (2*x^3 - 2*x^2)*q^2
A = matrix(SR, 2, lambda i, j: f'a{i}{j}'); A # needs sage.symbolic A.quantum_determinant() # needs sage.symbolic A = matrix(SR, 3, lambda i, j: f'a{i}{j}') # needs sage.symbolic A.quantum_determinant() # needs sage.symbolic R.<q> = LaurentPolynomialRing(ZZ) MS = MatrixSpace(Integers(8), 3) A = MS([1,7,3, 1,1,1, 3,4,5]) A.det() A.quantum_determinant(q^-2) S.<x,y> = PolynomialRing(GF(7)) R.<q> = LaurentPolynomialRing(S) MS = MatrixSpace(S, 3, sparse=True) A = MS([[x, y, 3], [4, 2+y, x^2], [0, 1-x, x+y]]) A.det() A.quantum_determinant() A.quantum_determinant(int(2)) A.quantum_determinant(q*x + q^-1*y)
- quantum_determinant(q=None)[source]¶
Return the quantum deteminant of
self.The quantum determinant of a matrix \(M = (m_{ij})_{i,j=1}^n\) is defined by
\[\det_q(M) = \sum_{\sigma \in S_n} (-q)^{\ell(\sigma)} M_{\sigma(i),j},\]where \(S_n\) is the symmetric group on \(\{1, \ldots, n\}\) and \(\ell(\sigma)\) denotes the length of \(\sigma\) written as simple transpositions (equivalently the number of inversions when written in one-line notation).
INPUT:
q– the parameter \(q\); the default is \(q \in F[q]\), where \(F\) is the base ring ofself
EXAMPLES:
sage: A = matrix(SR, 2, lambda i, j: f'a{i}{j}'); A # needs sage.symbolic [a00 a01] [a10 a11] sage: A.quantum_determinant() # needs sage.symbolic -a01*a10*q + a00*a11 sage: A = matrix(SR, 3, lambda i, j: f'a{i}{j}') # needs sage.symbolic sage: A.quantum_determinant() # needs sage.symbolic -a02*a11*a20*q^3 + (a01*a12*a20 + a02*a10*a21)*q^2 + (-a00*a12*a21 - a01*a10*a22)*q + a00*a11*a22 sage: R.<q> = LaurentPolynomialRing(ZZ) sage: MS = MatrixSpace(Integers(8), 3) sage: A = MS([1,7,3, 1,1,1, 3,4,5]) sage: A.det() 6 sage: A.quantum_determinant(q^-2) 7*q^-6 + q^-4 + q^-2 + 5 sage: S.<x,y> = PolynomialRing(GF(7)) sage: R.<q> = LaurentPolynomialRing(S) sage: MS = MatrixSpace(S, 3, sparse=True) sage: A = MS([[x, y, 3], [4, 2+y, x^2], [0, 1-x, x+y]]) sage: A.det() x^4 - x^3 + x^2*y + x*y^2 + 2*x^2 - 2*x*y + 3*y^2 + 2*x - 2 sage: A.quantum_determinant() (2*x - 2)*q^2 + (x^4 - x^3 + 3*x*y + 3*y^2)*q + x^2*y + x*y^2 + 2*x^2 + 2*x*y sage: A.quantum_determinant(int(2)) 2*x^4 - 2*x^3 + x^2*y + x*y^2 + 2*x^2 + x*y - y^2 + x - 1 sage: A.quantum_determinant(q*x + q^-1*y) (2*x*y^2 - 2*y^2)*q^-2 + (x^4*y - x^3*y + 3*x*y^2 + 3*y^3)*q^-1 + (-2*x^2*y + x*y^2 + 2*x^2 - 2*x*y) + (x^5 - x^4 + 3*x^2*y + 3*x*y^2)*q + (2*x^3 - 2*x^2)*q^2
>>> from sage.all import * >>> A = matrix(SR, Integer(2), lambda i, j: f'a{i}{j}'); A # needs sage.symbolic [a00 a01] [a10 a11] >>> A.quantum_determinant() # needs sage.symbolic -a01*a10*q + a00*a11 >>> A = matrix(SR, Integer(3), lambda i, j: f'a{i}{j}') # needs sage.symbolic >>> A.quantum_determinant() # needs sage.symbolic -a02*a11*a20*q^3 + (a01*a12*a20 + a02*a10*a21)*q^2 + (-a00*a12*a21 - a01*a10*a22)*q + a00*a11*a22 >>> R = LaurentPolynomialRing(ZZ, names=('q',)); (q,) = R._first_ngens(1) >>> MS = MatrixSpace(Integers(Integer(8)), Integer(3)) >>> A = MS([Integer(1),Integer(7),Integer(3), Integer(1),Integer(1),Integer(1), Integer(3),Integer(4),Integer(5)]) >>> A.det() 6 >>> A.quantum_determinant(q**-Integer(2)) 7*q^-6 + q^-4 + q^-2 + 5 >>> S = PolynomialRing(GF(Integer(7)), names=('x', 'y',)); (x, y,) = S._first_ngens(2) >>> R = LaurentPolynomialRing(S, names=('q',)); (q,) = R._first_ngens(1) >>> MS = MatrixSpace(S, Integer(3), sparse=True) >>> A = MS([[x, y, Integer(3)], [Integer(4), Integer(2)+y, x**Integer(2)], [Integer(0), Integer(1)-x, x+y]]) >>> A.det() x^4 - x^3 + x^2*y + x*y^2 + 2*x^2 - 2*x*y + 3*y^2 + 2*x - 2 >>> A.quantum_determinant() (2*x - 2)*q^2 + (x^4 - x^3 + 3*x*y + 3*y^2)*q + x^2*y + x*y^2 + 2*x^2 + 2*x*y >>> A.quantum_determinant(int(Integer(2))) 2*x^4 - 2*x^3 + x^2*y + x*y^2 + 2*x^2 + x*y - y^2 + x - 1 >>> A.quantum_determinant(q*x + q**-Integer(1)*y) (2*x*y^2 - 2*y^2)*q^-2 + (x^4*y - x^3*y + 3*x*y^2 + 3*y^3)*q^-1 + (-2*x^2*y + x*y^2 + 2*x^2 - 2*x*y) + (x^5 - x^4 + 3*x^2*y + 3*x*y^2)*q + (2*x^3 - 2*x^2)*q^2
A = matrix(SR, 2, lambda i, j: f'a{i}{j}'); A # needs sage.symbolic A.quantum_determinant() # needs sage.symbolic A = matrix(SR, 3, lambda i, j: f'a{i}{j}') # needs sage.symbolic A.quantum_determinant() # needs sage.symbolic R.<q> = LaurentPolynomialRing(ZZ) MS = MatrixSpace(Integers(8), 3) A = MS([1,7,3, 1,1,1, 3,4,5]) A.det() A.quantum_determinant(q^-2) S.<x,y> = PolynomialRing(GF(7)) R.<q> = LaurentPolynomialRing(S) MS = MatrixSpace(S, 3, sparse=True) A = MS([[x, y, 3], [4, 2+y, x^2], [0, 1-x, x+y]]) A.det() A.quantum_determinant() A.quantum_determinant(int(2)) A.quantum_determinant(q*x + q^-1*y)
- randomize(density=1, nonzero=False, *args, **kwds)[source]¶
Replace a proportion of the entries of a matrix by random elements, leaving the remaining entries unchanged.
Note
The locations of the entries of the matrix to change are determined randomly, with the total number of locations determined by the
densitykeyword. These locations are not guaranteed to be distinct. So it is possible that the same position can be chosen multiple times, especially for a very small matrix. The exception is whendensity = 1, in which case every entry of the matrix will be changed.INPUT:
density–float(default:1); upper bound for the proportion of entries that are changednonzero– boolean (default:False); ifTrue, then new entries will be nonzero*args, **kwds– remaining parameters may be passed to therandom_elementfunction of the base ring
EXAMPLES:
We construct the zero matrix over a polynomial ring.
sage: a = matrix(QQ['x'], 3); a [0 0 0] [0 0 0] [0 0 0]
>>> from sage.all import * >>> a = matrix(QQ['x'], Integer(3)); a [0 0 0] [0 0 0] [0 0 0]
a = matrix(QQ['x'], 3); a
We then randomize roughly half the entries:
sage: a.randomize(0.5) sage: a.density() <= 0.5 True
>>> from sage.all import * >>> a.randomize(RealNumber('0.5')) >>> a.density() <= RealNumber('0.5') True
a.randomize(0.5) a.density() <= 0.5
Now we randomize all the entries of the resulting matrix:
sage: while a.density() < 0.9: ....: a = matrix(QQ['x'], 3) ....: a.randomize()
>>> from sage.all import * >>> while a.density() < RealNumber('0.9'): ... a = matrix(QQ['x'], Integer(3)) ... a.randomize()
while a.density() < 0.9: a = matrix(QQ['x'], 3) a.randomize()We create the zero matrix over the integers:
sage: a = matrix(ZZ, 2); a [0 0] [0 0]
>>> from sage.all import * >>> a = matrix(ZZ, Integer(2)); a [0 0] [0 0]
a = matrix(ZZ, 2); a
Then we randomize it; the
xandykeywords, which determine the size of the random elements, are passed on to therandom_elementmethod forZZ.sage: a.randomize(x=-2^64, y=2^64) sage: while all(abs(b) < 2^63 for b in a.list()): ....: a.randomize(x=-2^64, y=2^64) sage: all(abs(b) < 2^64 for b in a.list()) True
>>> from sage.all import * >>> a.randomize(x=-Integer(2)**Integer(64), y=Integer(2)**Integer(64)) >>> while all(abs(b) < Integer(2)**Integer(63) for b in a.list()): ... a.randomize(x=-Integer(2)**Integer(64), y=Integer(2)**Integer(64)) >>> all(abs(b) < Integer(2)**Integer(64) for b in a.list()) True
a.randomize(x=-2^64, y=2^64) while all(abs(b) < 2^63 for b in a.list()): a.randomize(x=-2^64, y=2^64) all(abs(b) < 2^64 for b in a.list())
- rational_form(format='right', subdivide=True)[source]¶
Return the rational canonical form, also known as Frobenius form.
INPUT:
self– a square matrix with entries from an exact fieldformat– (default:'right') one of'right','bottom','left','top'or'invariants'. The first four will cause a matrix to be returned with companion matrices dictated by the keyword. The value ‘invariants’ will cause a list of lists to be returned, where each list contains coefficients of a polynomial associated with a companion matrix.subdivide– (default:'True') if ‘True’ and a matrix is returned, then it contains subdivisions delineating the companion matrices along the diagonal
OUTPUT:
The rational form of a matrix is a similar matrix composed of submatrices (“blocks”) placed on the main diagonal. Each block is a companion matrix. Associated with each companion matrix is a polynomial. In rational form, the polynomial of one block will divide the polynomial of the next block (and thus, the polynomials of all subsequent blocks).
Rational form, also known as Frobenius form, is a canonical form. In other words, two matrices are similar if and only if their rational canonical forms are equal. The algorithm used does not provide the similarity transformation matrix (also known as the change-of-basis matrix).
Companion matrices may be written in one of four styles, and any such style may be selected with the
formatkeyword. See the companion matrix constructor,sage.matrix.constructor.companion_matrix(), for more information about companion matrices.If the ‘invariants’ value is used for the
formatkeyword, then the return value is a list of lists, where each list is the coefficients of the polynomial associated with one of the companion matrices on the diagonal. These coefficients include the leading one of the monic polynomial and are ready to be coerced into any polynomial ring over the same field (see examples of this below). This return value is intended to be the most compact representation and the easiest to use for testing equality of rational forms.Because the minimal and characteristic polynomials of a companion matrix are the associated polynomial, it is easy to see that the product of the polynomials of the blocks will be the characteristic polynomial and the final polynomial will be the minimal polynomial of the entire matrix.
ALGORITHM:
We begin with ZigZag form, which is due to Arne Storjohann and is documented at
zigzag_form(). Then we eliminate ‘’corner’’ entries enroute to rational form via an additional algorithm of Storjohann’s [Sto2011].EXAMPLES:
The lists of coefficients returned with the
invariantskeyword are designed to easily convert to the polynomials associated with the companion matrices. This is illustrated by the construction below of thepolyslist. Then we can test the divisibility condition on the list of polynomials. Also the minimal and characteristic polynomials are easy to determine from this list.sage: A = matrix(QQ, [[ 11, 14, -15, -4, -38, -29, 1, 23, 14, -63, 17, 24, 36, 32], ....: [ 18, 6, -17, -11, -31, -43, 12, 26, 0, -69, 11, 13, 17, 24], ....: [ 11, 16, -22, -8, -48, -34, 0, 31, 16, -82, 26, 31, 39, 37], ....: [ -8, -18, 22, 10, 46, 33, 3, -27, -12, 70, -19, -20, -42, -31], ....: [-13, -21, 16, 10, 52, 43, 4, -28, -25, 89, -37, -20, -53, -62], ....: [ -2, -6, 0, 0, 6, 10, 1, 1, -7, 14, -11, -3, -10, -18], ....: [ -9, -19, -3, 4, 23, 30, 8, -3, -27, 55, -40, -5, -40, -69], ....: [ 4, -8, -1, -1, 5, -4, 9, 5, -11, 4, -14, -2, -13, -17], ....: [ 1, -2, 16, -1, 19, -2, -1, -17, 2, 19, 5, -25, -7, 14], ....: [ 7, 7, -13, -4, -26, -21, 3, 18, 5, -40, 7, 15, 20, 14], ....: [ -6, -7, -12, 4, -1, 18, 3, 8, -11, 15, -18, 17, -15, -41], ....: [ 5, 11, -11, -3, -26, -19, -1, 14, 10, -42, 14, 17, 25, 23], ....: [-16, -15, 3, 10, 29, 45, -1, -13, -19, 71, -35, -2, -35, -65], ....: [ 4, 2, 3, -2, -2, -10, 1, 0, 3, -11, 6, -4, 6, 17]]) sage: A.rational_form() [ 0 -4| 0 0 0 0| 0 0 0 0 0 0 0 0] [ 1 4| 0 0 0 0| 0 0 0 0 0 0 0 0] [---------+-------------------+---------------------------------------] [ 0 0| 0 0 0 12| 0 0 0 0 0 0 0 0] [ 0 0| 1 0 0 -4| 0 0 0 0 0 0 0 0] [ 0 0| 0 1 0 -9| 0 0 0 0 0 0 0 0] [ 0 0| 0 0 1 6| 0 0 0 0 0 0 0 0] [---------+-------------------+---------------------------------------] [ 0 0| 0 0 0 0| 0 0 0 0 0 0 0 -216] [ 0 0| 0 0 0 0| 1 0 0 0 0 0 0 108] [ 0 0| 0 0 0 0| 0 1 0 0 0 0 0 306] [ 0 0| 0 0 0 0| 0 0 1 0 0 0 0 -271] [ 0 0| 0 0 0 0| 0 0 0 1 0 0 0 -41] [ 0 0| 0 0 0 0| 0 0 0 0 1 0 0 134] [ 0 0| 0 0 0 0| 0 0 0 0 0 1 0 -64] [ 0 0| 0 0 0 0| 0 0 0 0 0 0 1 13] sage: R = PolynomialRing(QQ, 'x') sage: invariants = A.rational_form(format='invariants') sage: invariants [[4, -4, 1], [-12, 4, 9, -6, 1], [216, -108, -306, 271, 41, -134, 64, -13, 1]] sage: polys = [R(p) for p in invariants] sage: [p.factor() for p in polys] # needs sage.rings.finite_rings [(x - 2)^2, (x - 3) * (x + 1) * (x - 2)^2, (x + 1)^2 * (x - 3)^3 * (x - 2)^3] sage: all(polys[i].divides(polys[i+1]) for i in range(len(polys)-1)) True sage: polys[-1] == A.minimal_polynomial(var='x') # needs sage.libs.pari True sage: prod(polys) == A.characteristic_polynomial(var='x') # needs sage.libs.pari True
>>> from sage.all import * >>> A = matrix(QQ, [[ Integer(11), Integer(14), -Integer(15), -Integer(4), -Integer(38), -Integer(29), Integer(1), Integer(23), Integer(14), -Integer(63), Integer(17), Integer(24), Integer(36), Integer(32)], ... [ Integer(18), Integer(6), -Integer(17), -Integer(11), -Integer(31), -Integer(43), Integer(12), Integer(26), Integer(0), -Integer(69), Integer(11), Integer(13), Integer(17), Integer(24)], ... [ Integer(11), Integer(16), -Integer(22), -Integer(8), -Integer(48), -Integer(34), Integer(0), Integer(31), Integer(16), -Integer(82), Integer(26), Integer(31), Integer(39), Integer(37)], ... [ -Integer(8), -Integer(18), Integer(22), Integer(10), Integer(46), Integer(33), Integer(3), -Integer(27), -Integer(12), Integer(70), -Integer(19), -Integer(20), -Integer(42), -Integer(31)], ... [-Integer(13), -Integer(21), Integer(16), Integer(10), Integer(52), Integer(43), Integer(4), -Integer(28), -Integer(25), Integer(89), -Integer(37), -Integer(20), -Integer(53), -Integer(62)], ... [ -Integer(2), -Integer(6), Integer(0), Integer(0), Integer(6), Integer(10), Integer(1), Integer(1), -Integer(7), Integer(14), -Integer(11), -Integer(3), -Integer(10), -Integer(18)], ... [ -Integer(9), -Integer(19), -Integer(3), Integer(4), Integer(23), Integer(30), Integer(8), -Integer(3), -Integer(27), Integer(55), -Integer(40), -Integer(5), -Integer(40), -Integer(69)], ... [ Integer(4), -Integer(8), -Integer(1), -Integer(1), Integer(5), -Integer(4), Integer(9), Integer(5), -Integer(11), Integer(4), -Integer(14), -Integer(2), -Integer(13), -Integer(17)], ... [ Integer(1), -Integer(2), Integer(16), -Integer(1), Integer(19), -Integer(2), -Integer(1), -Integer(17), Integer(2), Integer(19), Integer(5), -Integer(25), -Integer(7), Integer(14)], ... [ Integer(7), Integer(7), -Integer(13), -Integer(4), -Integer(26), -Integer(21), Integer(3), Integer(18), Integer(5), -Integer(40), Integer(7), Integer(15), Integer(20), Integer(14)], ... [ -Integer(6), -Integer(7), -Integer(12), Integer(4), -Integer(1), Integer(18), Integer(3), Integer(8), -Integer(11), Integer(15), -Integer(18), Integer(17), -Integer(15), -Integer(41)], ... [ Integer(5), Integer(11), -Integer(11), -Integer(3), -Integer(26), -Integer(19), -Integer(1), Integer(14), Integer(10), -Integer(42), Integer(14), Integer(17), Integer(25), Integer(23)], ... [-Integer(16), -Integer(15), Integer(3), Integer(10), Integer(29), Integer(45), -Integer(1), -Integer(13), -Integer(19), Integer(71), -Integer(35), -Integer(2), -Integer(35), -Integer(65)], ... [ Integer(4), Integer(2), Integer(3), -Integer(2), -Integer(2), -Integer(10), Integer(1), Integer(0), Integer(3), -Integer(11), Integer(6), -Integer(4), Integer(6), Integer(17)]]) >>> A.rational_form() [ 0 -4| 0 0 0 0| 0 0 0 0 0 0 0 0] [ 1 4| 0 0 0 0| 0 0 0 0 0 0 0 0] [---------+-------------------+---------------------------------------] [ 0 0| 0 0 0 12| 0 0 0 0 0 0 0 0] [ 0 0| 1 0 0 -4| 0 0 0 0 0 0 0 0] [ 0 0| 0 1 0 -9| 0 0 0 0 0 0 0 0] [ 0 0| 0 0 1 6| 0 0 0 0 0 0 0 0] [---------+-------------------+---------------------------------------] [ 0 0| 0 0 0 0| 0 0 0 0 0 0 0 -216] [ 0 0| 0 0 0 0| 1 0 0 0 0 0 0 108] [ 0 0| 0 0 0 0| 0 1 0 0 0 0 0 306] [ 0 0| 0 0 0 0| 0 0 1 0 0 0 0 -271] [ 0 0| 0 0 0 0| 0 0 0 1 0 0 0 -41] [ 0 0| 0 0 0 0| 0 0 0 0 1 0 0 134] [ 0 0| 0 0 0 0| 0 0 0 0 0 1 0 -64] [ 0 0| 0 0 0 0| 0 0 0 0 0 0 1 13] >>> R = PolynomialRing(QQ, 'x') >>> invariants = A.rational_form(format='invariants') >>> invariants [[4, -4, 1], [-12, 4, 9, -6, 1], [216, -108, -306, 271, 41, -134, 64, -13, 1]] >>> polys = [R(p) for p in invariants] >>> [p.factor() for p in polys] # needs sage.rings.finite_rings [(x - 2)^2, (x - 3) * (x + 1) * (x - 2)^2, (x + 1)^2 * (x - 3)^3 * (x - 2)^3] >>> all(polys[i].divides(polys[i+Integer(1)]) for i in range(len(polys)-Integer(1))) True >>> polys[-Integer(1)] == A.minimal_polynomial(var='x') # needs sage.libs.pari True >>> prod(polys) == A.characteristic_polynomial(var='x') # needs sage.libs.pari True
A = matrix(QQ, [[ 11, 14, -15, -4, -38, -29, 1, 23, 14, -63, 17, 24, 36, 32], [ 18, 6, -17, -11, -31, -43, 12, 26, 0, -69, 11, 13, 17, 24], [ 11, 16, -22, -8, -48, -34, 0, 31, 16, -82, 26, 31, 39, 37], [ -8, -18, 22, 10, 46, 33, 3, -27, -12, 70, -19, -20, -42, -31], [-13, -21, 16, 10, 52, 43, 4, -28, -25, 89, -37, -20, -53, -62], [ -2, -6, 0, 0, 6, 10, 1, 1, -7, 14, -11, -3, -10, -18], [ -9, -19, -3, 4, 23, 30, 8, -3, -27, 55, -40, -5, -40, -69], [ 4, -8, -1, -1, 5, -4, 9, 5, -11, 4, -14, -2, -13, -17], [ 1, -2, 16, -1, 19, -2, -1, -17, 2, 19, 5, -25, -7, 14], [ 7, 7, -13, -4, -26, -21, 3, 18, 5, -40, 7, 15, 20, 14], [ -6, -7, -12, 4, -1, 18, 3, 8, -11, 15, -18, 17, -15, -41], [ 5, 11, -11, -3, -26, -19, -1, 14, 10, -42, 14, 17, 25, 23], [-16, -15, 3, 10, 29, 45, -1, -13, -19, 71, -35, -2, -35, -65], [ 4, 2, 3, -2, -2, -10, 1, 0, 3, -11, 6, -4, 6, 17]]) A.rational_form() R = PolynomialRing(QQ, 'x') invariants = A.rational_form(format='invariants') invariants polys = [R(p) for p in invariants] [p.factor() for p in polys] # needs sage.rings.finite_rings all(polys[i].divides(polys[i+1]) for i in range(len(polys)-1)) polys[-1] == A.minimal_polynomial(var='x') # needs sage.libs.pari prod(polys) == A.characteristic_polynomial(var='x') # needs sage.libs.pariRational form is a canonical form. Any two matrices are similar if and only if their rational forms are equal. By starting with Jordan canonical forms, the matrices
CandDbelow were built as similar matrices, whileEwas built to be just slightly different. All three matrices have equal characteristic polynomials thoughE’s minimal polynomial differs.sage: C = matrix(QQ, [[2, 31, -10, -9, -125, 13, 62, -12], ....: [0, 48, -16, -16, -188, 20, 92, -16], ....: [0, 9, -1, 2, -33, 5, 18, 0], ....: [0, 15, -5, 0, -59, 7, 30, -4], ....: [0, -21, 7, 2, 84, -10, -42, 5], ....: [0, -42, 14, 8, 167, -17, -84, 13], ....: [0, -50, 17, 10, 199, -23, -98, 14], ....: [0, 15, -5, -2, -59, 7, 30, -2]]) sage: C.minimal_polynomial().factor() # needs sage.libs.pari (x - 2)^2 sage: C.characteristic_polynomial().factor() # needs sage.libs.pari (x - 2)^8 sage: C.rational_form() [ 0 -4| 0 0| 0 0| 0 0] [ 1 4| 0 0| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 -4| 0 0| 0 0] [ 0 0| 1 4| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 -4| 0 0] [ 0 0| 0 0| 1 4| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 0| 0 -4] [ 0 0| 0 0| 0 0| 1 4] sage: D = matrix(QQ, [[ -4, 3, 7, 2, -4, 5, 7, -3], ....: [ -6, 5, 7, 2, -4, 5, 7, -3], ....: [ 21, -12, 89, 25, 8, 27, 98, -95], ....: [ -9, 5, -44, -11, -3, -13, -48, 47], ....: [ 23, -13, 74, 21, 12, 22, 85, -84], ....: [ 31, -18, 135, 38, 12, 47, 155, -147], ....: [-33, 19, -138, -39, -13, -45, -156, 151], ....: [ -7, 4, -29, -8, -3, -10, -34, 34]]) sage: D.minimal_polynomial().factor() # needs sage.libs.pari (x - 2)^2 sage: D.characteristic_polynomial().factor() # needs sage.libs.pari (x - 2)^8 sage: D.rational_form() [ 0 -4| 0 0| 0 0| 0 0] [ 1 4| 0 0| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 -4| 0 0| 0 0] [ 0 0| 1 4| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 -4| 0 0] [ 0 0| 0 0| 1 4| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 0| 0 -4] [ 0 0| 0 0| 0 0| 1 4] sage: E = matrix(QQ, [[ 0, -8, 4, -6, -2, 5, -3, 11], ....: [-2, -4, 2, -4, -2, 4, -2, 6], ....: [ 5, 14, -7, 12, 3, -8, 6, -27], ....: [-3, -8, 7, -5, 0, 2, -6, 17], ....: [ 0, 5, 0, 2, 4, -4, 1, 2], ....: [-3, -7, 5, -6, -1, 5, -4, 14], ....: [ 6, 18, -10, 14, 4, -10, 10, -28], ....: [-2, -6, 4, -5, -1, 3, -3, 13]]) sage: E.minimal_polynomial().factor() # needs sage.libs.pari (x - 2)^3 sage: E.characteristic_polynomial().factor() # needs sage.libs.pari (x - 2)^8 sage: E.rational_form() [ 2| 0 0| 0 0| 0 0 0] [---+-------+-------+-----------] [ 0| 0 -4| 0 0| 0 0 0] [ 0| 1 4| 0 0| 0 0 0] [---+-------+-------+-----------] [ 0| 0 0| 0 -4| 0 0 0] [ 0| 0 0| 1 4| 0 0 0] [---+-------+-------+-----------] [ 0| 0 0| 0 0| 0 0 8] [ 0| 0 0| 0 0| 1 0 -12] [ 0| 0 0| 0 0| 0 1 6]
>>> from sage.all import * >>> C = matrix(QQ, [[Integer(2), Integer(31), -Integer(10), -Integer(9), -Integer(125), Integer(13), Integer(62), -Integer(12)], ... [Integer(0), Integer(48), -Integer(16), -Integer(16), -Integer(188), Integer(20), Integer(92), -Integer(16)], ... [Integer(0), Integer(9), -Integer(1), Integer(2), -Integer(33), Integer(5), Integer(18), Integer(0)], ... [Integer(0), Integer(15), -Integer(5), Integer(0), -Integer(59), Integer(7), Integer(30), -Integer(4)], ... [Integer(0), -Integer(21), Integer(7), Integer(2), Integer(84), -Integer(10), -Integer(42), Integer(5)], ... [Integer(0), -Integer(42), Integer(14), Integer(8), Integer(167), -Integer(17), -Integer(84), Integer(13)], ... [Integer(0), -Integer(50), Integer(17), Integer(10), Integer(199), -Integer(23), -Integer(98), Integer(14)], ... [Integer(0), Integer(15), -Integer(5), -Integer(2), -Integer(59), Integer(7), Integer(30), -Integer(2)]]) >>> C.minimal_polynomial().factor() # needs sage.libs.pari (x - 2)^2 >>> C.characteristic_polynomial().factor() # needs sage.libs.pari (x - 2)^8 >>> C.rational_form() [ 0 -4| 0 0| 0 0| 0 0] [ 1 4| 0 0| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 -4| 0 0| 0 0] [ 0 0| 1 4| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 -4| 0 0] [ 0 0| 0 0| 1 4| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 0| 0 -4] [ 0 0| 0 0| 0 0| 1 4] >>> D = matrix(QQ, [[ -Integer(4), Integer(3), Integer(7), Integer(2), -Integer(4), Integer(5), Integer(7), -Integer(3)], ... [ -Integer(6), Integer(5), Integer(7), Integer(2), -Integer(4), Integer(5), Integer(7), -Integer(3)], ... [ Integer(21), -Integer(12), Integer(89), Integer(25), Integer(8), Integer(27), Integer(98), -Integer(95)], ... [ -Integer(9), Integer(5), -Integer(44), -Integer(11), -Integer(3), -Integer(13), -Integer(48), Integer(47)], ... [ Integer(23), -Integer(13), Integer(74), Integer(21), Integer(12), Integer(22), Integer(85), -Integer(84)], ... [ Integer(31), -Integer(18), Integer(135), Integer(38), Integer(12), Integer(47), Integer(155), -Integer(147)], ... [-Integer(33), Integer(19), -Integer(138), -Integer(39), -Integer(13), -Integer(45), -Integer(156), Integer(151)], ... [ -Integer(7), Integer(4), -Integer(29), -Integer(8), -Integer(3), -Integer(10), -Integer(34), Integer(34)]]) >>> D.minimal_polynomial().factor() # needs sage.libs.pari (x - 2)^2 >>> D.characteristic_polynomial().factor() # needs sage.libs.pari (x - 2)^8 >>> D.rational_form() [ 0 -4| 0 0| 0 0| 0 0] [ 1 4| 0 0| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 -4| 0 0| 0 0] [ 0 0| 1 4| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 -4| 0 0] [ 0 0| 0 0| 1 4| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 0| 0 -4] [ 0 0| 0 0| 0 0| 1 4] >>> E = matrix(QQ, [[ Integer(0), -Integer(8), Integer(4), -Integer(6), -Integer(2), Integer(5), -Integer(3), Integer(11)], ... [-Integer(2), -Integer(4), Integer(2), -Integer(4), -Integer(2), Integer(4), -Integer(2), Integer(6)], ... [ Integer(5), Integer(14), -Integer(7), Integer(12), Integer(3), -Integer(8), Integer(6), -Integer(27)], ... [-Integer(3), -Integer(8), Integer(7), -Integer(5), Integer(0), Integer(2), -Integer(6), Integer(17)], ... [ Integer(0), Integer(5), Integer(0), Integer(2), Integer(4), -Integer(4), Integer(1), Integer(2)], ... [-Integer(3), -Integer(7), Integer(5), -Integer(6), -Integer(1), Integer(5), -Integer(4), Integer(14)], ... [ Integer(6), Integer(18), -Integer(10), Integer(14), Integer(4), -Integer(10), Integer(10), -Integer(28)], ... [-Integer(2), -Integer(6), Integer(4), -Integer(5), -Integer(1), Integer(3), -Integer(3), Integer(13)]]) >>> E.minimal_polynomial().factor() # needs sage.libs.pari (x - 2)^3 >>> E.characteristic_polynomial().factor() # needs sage.libs.pari (x - 2)^8 >>> E.rational_form() [ 2| 0 0| 0 0| 0 0 0] [---+-------+-------+-----------] [ 0| 0 -4| 0 0| 0 0 0] [ 0| 1 4| 0 0| 0 0 0] [---+-------+-------+-----------] [ 0| 0 0| 0 -4| 0 0 0] [ 0| 0 0| 1 4| 0 0 0] [---+-------+-------+-----------] [ 0| 0 0| 0 0| 0 0 8] [ 0| 0 0| 0 0| 1 0 -12] [ 0| 0 0| 0 0| 0 1 6]
C = matrix(QQ, [[2, 31, -10, -9, -125, 13, 62, -12], [0, 48, -16, -16, -188, 20, 92, -16], [0, 9, -1, 2, -33, 5, 18, 0], [0, 15, -5, 0, -59, 7, 30, -4], [0, -21, 7, 2, 84, -10, -42, 5], [0, -42, 14, 8, 167, -17, -84, 13], [0, -50, 17, 10, 199, -23, -98, 14], [0, 15, -5, -2, -59, 7, 30, -2]]) C.minimal_polynomial().factor() # needs sage.libs.pari C.characteristic_polynomial().factor() # needs sage.libs.pari C.rational_form() D = matrix(QQ, [[ -4, 3, 7, 2, -4, 5, 7, -3], [ -6, 5, 7, 2, -4, 5, 7, -3], [ 21, -12, 89, 25, 8, 27, 98, -95], [ -9, 5, -44, -11, -3, -13, -48, 47], [ 23, -13, 74, 21, 12, 22, 85, -84], [ 31, -18, 135, 38, 12, 47, 155, -147], [-33, 19, -138, -39, -13, -45, -156, 151], [ -7, 4, -29, -8, -3, -10, -34, 34]]) D.minimal_polynomial().factor() # needs sage.libs.pari D.characteristic_polynomial().factor() # needs sage.libs.pari D.rational_form() E = matrix(QQ, [[ 0, -8, 4, -6, -2, 5, -3, 11], [-2, -4, 2, -4, -2, 4, -2, 6], [ 5, 14, -7, 12, 3, -8, 6, -27], [-3, -8, 7, -5, 0, 2, -6, 17], [ 0, 5, 0, 2, 4, -4, 1, 2], [-3, -7, 5, -6, -1, 5, -4, 14], [ 6, 18, -10, 14, 4, -10, 10, -28], [-2, -6, 4, -5, -1, 3, -3, 13]]) E.minimal_polynomial().factor() # needs sage.libs.pari E.characteristic_polynomial().factor() # needs sage.libs.pari E.rational_form()The principal feature of rational canonical form is that it can be computed over any field using only field operations. Other forms, such as Jordan canonical form, are complicated by the need to determine the eigenvalues of the matrix, which can lie outside the field. The following matrix has all of its eigenvalues outside the rationals - some are irrational (\(\pm\sqrt{2}\)) and the rest are complex (\(-1\pm 2i\)).
sage: A = matrix(QQ, ....: [[-154, -3, -54, 44, 48, -244, -19, 67, -326, 85, 355, 581], ....: [ 504, 25, 156, -145, -171, 793, 99, -213, 1036, -247, -1152, -1865], ....: [ 294, -1, 112, -89, -90, 469, 36, -128, 634, -160, -695, -1126], ....: [ -49, -32, 25, 7, 37, -64, -58, 12, -42, -14, 72, 106], ....: [-261, -123, 65, 47, 169, -358, -254, 70, -309, -29, 454, 673], ....: [-448, -123, -10, 109, 227, -668, -262, 163, -721, 95, 896, 1410], ....: [ 38, 7, 8, -14, -17, 66, 6, -23, 73, -29, -78, -143], ....: [ -96, 10, -55, 37, 24, -168, 17, 56, -231, 88, 237, 412], ....: [ 310, 67, 31, -81, -143, 473, 143, -122, 538, -98, -641, -1029], ....: [ 139, -35, 99, -49, -18, 236, -41, -70, 370, -118, -377, -619], ....: [ 243, 9, 81, -72, -81, 386, 43, -105, 508, -124, -564, -911], ....: [-155, -3, -55, 45, 50, -245, -27, 65, -328, 77, 365, 583]]) sage: A.characteristic_polynomial().factor() # needs sage.libs.pari (x^2 - 2)^2 * (x^2 + 2*x + 5)^4 sage: A.eigenvalues(extend=False) # needs sage.libs.pari [] sage: A.rational_form() [ 0 -5| 0 0 0 0| 0 0 0 0 0 0] [ 1 -2| 0 0 0 0| 0 0 0 0 0 0] [-------+---------------+-----------------------] [ 0 0| 0 0 0 10| 0 0 0 0 0 0] [ 0 0| 1 0 0 4| 0 0 0 0 0 0] [ 0 0| 0 1 0 -3| 0 0 0 0 0 0] [ 0 0| 0 0 1 -2| 0 0 0 0 0 0] [-------+---------------+-----------------------] [ 0 0| 0 0 0 0| 0 0 0 0 0 50] [ 0 0| 0 0 0 0| 1 0 0 0 0 40] [ 0 0| 0 0 0 0| 0 1 0 0 0 3] [ 0 0| 0 0 0 0| 0 0 1 0 0 -12] [ 0 0| 0 0 0 0| 0 0 0 1 0 -12] [ 0 0| 0 0 0 0| 0 0 0 0 1 -4] sage: F.<x> = QQ[] sage: polys = A.rational_form(format='invariants') sage: [F(p).factor() for p in polys] # needs sage.libs.pari [x^2 + 2*x + 5, (x^2 - 2) * (x^2 + 2*x + 5), (x^2 - 2) * (x^2 + 2*x + 5)^2]
>>> from sage.all import * >>> A = matrix(QQ, ... [[-Integer(154), -Integer(3), -Integer(54), Integer(44), Integer(48), -Integer(244), -Integer(19), Integer(67), -Integer(326), Integer(85), Integer(355), Integer(581)], ... [ Integer(504), Integer(25), Integer(156), -Integer(145), -Integer(171), Integer(793), Integer(99), -Integer(213), Integer(1036), -Integer(247), -Integer(1152), -Integer(1865)], ... [ Integer(294), -Integer(1), Integer(112), -Integer(89), -Integer(90), Integer(469), Integer(36), -Integer(128), Integer(634), -Integer(160), -Integer(695), -Integer(1126)], ... [ -Integer(49), -Integer(32), Integer(25), Integer(7), Integer(37), -Integer(64), -Integer(58), Integer(12), -Integer(42), -Integer(14), Integer(72), Integer(106)], ... [-Integer(261), -Integer(123), Integer(65), Integer(47), Integer(169), -Integer(358), -Integer(254), Integer(70), -Integer(309), -Integer(29), Integer(454), Integer(673)], ... [-Integer(448), -Integer(123), -Integer(10), Integer(109), Integer(227), -Integer(668), -Integer(262), Integer(163), -Integer(721), Integer(95), Integer(896), Integer(1410)], ... [ Integer(38), Integer(7), Integer(8), -Integer(14), -Integer(17), Integer(66), Integer(6), -Integer(23), Integer(73), -Integer(29), -Integer(78), -Integer(143)], ... [ -Integer(96), Integer(10), -Integer(55), Integer(37), Integer(24), -Integer(168), Integer(17), Integer(56), -Integer(231), Integer(88), Integer(237), Integer(412)], ... [ Integer(310), Integer(67), Integer(31), -Integer(81), -Integer(143), Integer(473), Integer(143), -Integer(122), Integer(538), -Integer(98), -Integer(641), -Integer(1029)], ... [ Integer(139), -Integer(35), Integer(99), -Integer(49), -Integer(18), Integer(236), -Integer(41), -Integer(70), Integer(370), -Integer(118), -Integer(377), -Integer(619)], ... [ Integer(243), Integer(9), Integer(81), -Integer(72), -Integer(81), Integer(386), Integer(43), -Integer(105), Integer(508), -Integer(124), -Integer(564), -Integer(911)], ... [-Integer(155), -Integer(3), -Integer(55), Integer(45), Integer(50), -Integer(245), -Integer(27), Integer(65), -Integer(328), Integer(77), Integer(365), Integer(583)]]) >>> A.characteristic_polynomial().factor() # needs sage.libs.pari (x^2 - 2)^2 * (x^2 + 2*x + 5)^4 >>> A.eigenvalues(extend=False) # needs sage.libs.pari [] >>> A.rational_form() [ 0 -5| 0 0 0 0| 0 0 0 0 0 0] [ 1 -2| 0 0 0 0| 0 0 0 0 0 0] [-------+---------------+-----------------------] [ 0 0| 0 0 0 10| 0 0 0 0 0 0] [ 0 0| 1 0 0 4| 0 0 0 0 0 0] [ 0 0| 0 1 0 -3| 0 0 0 0 0 0] [ 0 0| 0 0 1 -2| 0 0 0 0 0 0] [-------+---------------+-----------------------] [ 0 0| 0 0 0 0| 0 0 0 0 0 50] [ 0 0| 0 0 0 0| 1 0 0 0 0 40] [ 0 0| 0 0 0 0| 0 1 0 0 0 3] [ 0 0| 0 0 0 0| 0 0 1 0 0 -12] [ 0 0| 0 0 0 0| 0 0 0 1 0 -12] [ 0 0| 0 0 0 0| 0 0 0 0 1 -4] >>> F = QQ['x']; (x,) = F._first_ngens(1) >>> polys = A.rational_form(format='invariants') >>> [F(p).factor() for p in polys] # needs sage.libs.pari [x^2 + 2*x + 5, (x^2 - 2) * (x^2 + 2*x + 5), (x^2 - 2) * (x^2 + 2*x + 5)^2]
A = matrix(QQ, [[-154, -3, -54, 44, 48, -244, -19, 67, -326, 85, 355, 581], [ 504, 25, 156, -145, -171, 793, 99, -213, 1036, -247, -1152, -1865], [ 294, -1, 112, -89, -90, 469, 36, -128, 634, -160, -695, -1126], [ -49, -32, 25, 7, 37, -64, -58, 12, -42, -14, 72, 106], [-261, -123, 65, 47, 169, -358, -254, 70, -309, -29, 454, 673], [-448, -123, -10, 109, 227, -668, -262, 163, -721, 95, 896, 1410], [ 38, 7, 8, -14, -17, 66, 6, -23, 73, -29, -78, -143], [ -96, 10, -55, 37, 24, -168, 17, 56, -231, 88, 237, 412], [ 310, 67, 31, -81, -143, 473, 143, -122, 538, -98, -641, -1029], [ 139, -35, 99, -49, -18, 236, -41, -70, 370, -118, -377, -619], [ 243, 9, 81, -72, -81, 386, 43, -105, 508, -124, -564, -911], [-155, -3, -55, 45, 50, -245, -27, 65, -328, 77, 365, 583]]) A.characteristic_polynomial().factor() # needs sage.libs.pari A.eigenvalues(extend=False) # needs sage.libs.pari A.rational_form() F.<x> = QQ[] polys = A.rational_form(format='invariants') [F(p).factor() for p in polys] # needs sage.libs.pari
Rational form may be computed over any field. The matrix below is an example where the eigenvalues lie outside the field.
sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(7^2) sage: A = matrix(F, ....: [[5*a + 3, 4*a + 1, 6*a + 2, 2*a + 5, 6, 4*a + 5, 4*a + 5, 5, a + 6, 5, 4*a + 4], ....: [6*a + 3, 2*a + 4, 0, 6, 5*a + 5, 2*a, 5*a + 1, 1, 5*a + 2, 4*a, 5*a + 6], ....: [3*a + 1, 6*a + 6, a + 6, 2, 0, 3*a + 6, 5*a + 4, 5*a + 6, 5*a + 2, 3, 4*a + 2], ....: [ 3*a, 6*a, 3*a, 4*a, 4*a + 4, 3*a + 6, 6*a, 4, 3*a + 4, 6*a + 2, 4*a], ....: [4*a + 5, a + 1, 4*a + 3, 6*a + 5, 5*a + 2, 5*a + 2, 6*a, 4*a + 6, 6*a + 4, 5*a + 3, 3*a + 1], ....: [ 3*a, 6*a, 4*a + 1, 6*a + 2, 2*a + 5, 4*a + 6, 2, a + 5, 2*a + 4, 2*a + 1, 2*a + 1], ....: [4*a + 5, 3*a + 3, 6, 4*a + 1, 4*a + 3, 6*a + 3, 6, 3*a + 3, 3, a + 3, 0], ....: [6*a + 6, a + 4, 2*a + 6, 3*a + 5, 4*a + 3, 2, a, 3*a + 4, 5*a, 2*a + 5, 4*a + 3], ....: [3*a + 5, 6*a + 2, 4*a, a + 5, 0, 5*a, 6*a + 5, 2*a + 1, 3*a + 1, 3*a + 5, 4*a + 2], ....: [3*a + 2, a + 3, 3*a + 6, a, 3*a + 5, 5*a + 1, 3*a + 2, a + 3, a + 2, 6*a + 1, 3*a + 3], ....: [6*a + 6, 5*a + 1, 4*a, 2, 5*a + 5, 3*a + 5, 3*a + 1, 2*a, 2*a, 2*a + 4, 4*a + 2]]) sage: A.rational_form() [ a + 2| 0 0 0| 0 0 0 0 0 0 0] [-------+-----------------------+-------------------------------------------------------] [ 0| 0 0 a + 6| 0 0 0 0 0 0 0] [ 0| 1 0 6*a + 4| 0 0 0 0 0 0 0] [ 0| 0 1 6*a + 4| 0 0 0 0 0 0 0] [-------+-----------------------+-------------------------------------------------------] [ 0| 0 0 0| 0 0 0 0 0 0 2*a] [ 0| 0 0 0| 1 0 0 0 0 0 6*a + 3] [ 0| 0 0 0| 0 1 0 0 0 0 6*a + 1] [ 0| 0 0 0| 0 0 1 0 0 0 a + 2] [ 0| 0 0 0| 0 0 0 1 0 0 a + 6] [ 0| 0 0 0| 0 0 0 0 1 0 2*a + 1] [ 0| 0 0 0| 0 0 0 0 0 1 2*a + 1] sage: invariants = A.rational_form(format='invariants') sage: invariants [[6*a + 5, 1], [6*a + 1, a + 3, a + 3, 1], [5*a, a + 4, a + 6, 6*a + 5, 6*a + 1, 5*a + 6, 5*a + 6, 1]] sage: R.<x> = F[] sage: polys = [R(p) for p in invariants] sage: [p.factor() for p in polys] [x + 6*a + 5, (x + 6*a + 5) * (x^2 + (2*a + 5)*x + 5*a), (x + 6*a + 5) * (x^2 + (2*a + 5)*x + 5*a)^3] sage: polys[-1] == A.minimal_polynomial() True sage: prod(polys) == A.characteristic_polynomial() True sage: A.eigenvalues() Traceback (most recent call last): ... TypeError: no canonical coercion from Finite Field in a of size 7^2 to Finite Field in z2 of size 7^2
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(7)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, ... [[Integer(5)*a + Integer(3), Integer(4)*a + Integer(1), Integer(6)*a + Integer(2), Integer(2)*a + Integer(5), Integer(6), Integer(4)*a + Integer(5), Integer(4)*a + Integer(5), Integer(5), a + Integer(6), Integer(5), Integer(4)*a + Integer(4)], ... [Integer(6)*a + Integer(3), Integer(2)*a + Integer(4), Integer(0), Integer(6), Integer(5)*a + Integer(5), Integer(2)*a, Integer(5)*a + Integer(1), Integer(1), Integer(5)*a + Integer(2), Integer(4)*a, Integer(5)*a + Integer(6)], ... [Integer(3)*a + Integer(1), Integer(6)*a + Integer(6), a + Integer(6), Integer(2), Integer(0), Integer(3)*a + Integer(6), Integer(5)*a + Integer(4), Integer(5)*a + Integer(6), Integer(5)*a + Integer(2), Integer(3), Integer(4)*a + Integer(2)], ... [ Integer(3)*a, Integer(6)*a, Integer(3)*a, Integer(4)*a, Integer(4)*a + Integer(4), Integer(3)*a + Integer(6), Integer(6)*a, Integer(4), Integer(3)*a + Integer(4), Integer(6)*a + Integer(2), Integer(4)*a], ... [Integer(4)*a + Integer(5), a + Integer(1), Integer(4)*a + Integer(3), Integer(6)*a + Integer(5), Integer(5)*a + Integer(2), Integer(5)*a + Integer(2), Integer(6)*a, Integer(4)*a + Integer(6), Integer(6)*a + Integer(4), Integer(5)*a + Integer(3), Integer(3)*a + Integer(1)], ... [ Integer(3)*a, Integer(6)*a, Integer(4)*a + Integer(1), Integer(6)*a + Integer(2), Integer(2)*a + Integer(5), Integer(4)*a + Integer(6), Integer(2), a + Integer(5), Integer(2)*a + Integer(4), Integer(2)*a + Integer(1), Integer(2)*a + Integer(1)], ... [Integer(4)*a + Integer(5), Integer(3)*a + Integer(3), Integer(6), Integer(4)*a + Integer(1), Integer(4)*a + Integer(3), Integer(6)*a + Integer(3), Integer(6), Integer(3)*a + Integer(3), Integer(3), a + Integer(3), Integer(0)], ... [Integer(6)*a + Integer(6), a + Integer(4), Integer(2)*a + Integer(6), Integer(3)*a + Integer(5), Integer(4)*a + Integer(3), Integer(2), a, Integer(3)*a + Integer(4), Integer(5)*a, Integer(2)*a + Integer(5), Integer(4)*a + Integer(3)], ... [Integer(3)*a + Integer(5), Integer(6)*a + Integer(2), Integer(4)*a, a + Integer(5), Integer(0), Integer(5)*a, Integer(6)*a + Integer(5), Integer(2)*a + Integer(1), Integer(3)*a + Integer(1), Integer(3)*a + Integer(5), Integer(4)*a + Integer(2)], ... [Integer(3)*a + Integer(2), a + Integer(3), Integer(3)*a + Integer(6), a, Integer(3)*a + Integer(5), Integer(5)*a + Integer(1), Integer(3)*a + Integer(2), a + Integer(3), a + Integer(2), Integer(6)*a + Integer(1), Integer(3)*a + Integer(3)], ... [Integer(6)*a + Integer(6), Integer(5)*a + Integer(1), Integer(4)*a, Integer(2), Integer(5)*a + Integer(5), Integer(3)*a + Integer(5), Integer(3)*a + Integer(1), Integer(2)*a, Integer(2)*a, Integer(2)*a + Integer(4), Integer(4)*a + Integer(2)]]) >>> A.rational_form() [ a + 2| 0 0 0| 0 0 0 0 0 0 0] [-------+-----------------------+-------------------------------------------------------] [ 0| 0 0 a + 6| 0 0 0 0 0 0 0] [ 0| 1 0 6*a + 4| 0 0 0 0 0 0 0] [ 0| 0 1 6*a + 4| 0 0 0 0 0 0 0] [-------+-----------------------+-------------------------------------------------------] [ 0| 0 0 0| 0 0 0 0 0 0 2*a] [ 0| 0 0 0| 1 0 0 0 0 0 6*a + 3] [ 0| 0 0 0| 0 1 0 0 0 0 6*a + 1] [ 0| 0 0 0| 0 0 1 0 0 0 a + 2] [ 0| 0 0 0| 0 0 0 1 0 0 a + 6] [ 0| 0 0 0| 0 0 0 0 1 0 2*a + 1] [ 0| 0 0 0| 0 0 0 0 0 1 2*a + 1] >>> invariants = A.rational_form(format='invariants') >>> invariants [[6*a + 5, 1], [6*a + 1, a + 3, a + 3, 1], [5*a, a + 4, a + 6, 6*a + 5, 6*a + 1, 5*a + 6, 5*a + 6, 1]] >>> R = F['x']; (x,) = R._first_ngens(1) >>> polys = [R(p) for p in invariants] >>> [p.factor() for p in polys] [x + 6*a + 5, (x + 6*a + 5) * (x^2 + (2*a + 5)*x + 5*a), (x + 6*a + 5) * (x^2 + (2*a + 5)*x + 5*a)^3] >>> polys[-Integer(1)] == A.minimal_polynomial() True >>> prod(polys) == A.characteristic_polynomial() True >>> A.eigenvalues() Traceback (most recent call last): ... TypeError: no canonical coercion from Finite Field in a of size 7^2 to Finite Field in z2 of size 7^2
# needs sage.rings.finite_rings F.<a> = FiniteField(7^2) A = matrix(F, [[5*a + 3, 4*a + 1, 6*a + 2, 2*a + 5, 6, 4*a + 5, 4*a + 5, 5, a + 6, 5, 4*a + 4], [6*a + 3, 2*a + 4, 0, 6, 5*a + 5, 2*a, 5*a + 1, 1, 5*a + 2, 4*a, 5*a + 6], [3*a + 1, 6*a + 6, a + 6, 2, 0, 3*a + 6, 5*a + 4, 5*a + 6, 5*a + 2, 3, 4*a + 2], [ 3*a, 6*a, 3*a, 4*a, 4*a + 4, 3*a + 6, 6*a, 4, 3*a + 4, 6*a + 2, 4*a], [4*a + 5, a + 1, 4*a + 3, 6*a + 5, 5*a + 2, 5*a + 2, 6*a, 4*a + 6, 6*a + 4, 5*a + 3, 3*a + 1], [ 3*a, 6*a, 4*a + 1, 6*a + 2, 2*a + 5, 4*a + 6, 2, a + 5, 2*a + 4, 2*a + 1, 2*a + 1], [4*a + 5, 3*a + 3, 6, 4*a + 1, 4*a + 3, 6*a + 3, 6, 3*a + 3, 3, a + 3, 0], [6*a + 6, a + 4, 2*a + 6, 3*a + 5, 4*a + 3, 2, a, 3*a + 4, 5*a, 2*a + 5, 4*a + 3], [3*a + 5, 6*a + 2, 4*a, a + 5, 0, 5*a, 6*a + 5, 2*a + 1, 3*a + 1, 3*a + 5, 4*a + 2], [3*a + 2, a + 3, 3*a + 6, a, 3*a + 5, 5*a + 1, 3*a + 2, a + 3, a + 2, 6*a + 1, 3*a + 3], [6*a + 6, 5*a + 1, 4*a, 2, 5*a + 5, 3*a + 5, 3*a + 1, 2*a, 2*a, 2*a + 4, 4*a + 2]]) A.rational_form() invariants = A.rational_form(format='invariants') invariants R.<x> = F[] polys = [R(p) for p in invariants] [p.factor() for p in polys] polys[-1] == A.minimal_polynomial() prod(polys) == A.characteristic_polynomial() A.eigenvalues()
Companion matrices may be selected as any one of four different types. See the documentation for the companion matrix constructor,
sage.matrix.constructor.companion_matrix(), for more information.sage: A = matrix(QQ, [[35, -18, -2, -45], ....: [22, -22, 12, -16], ....: [ 5, -12, 12, 4], ....: [16, -6, -4, -23]]) sage: A.rational_form(format='right') [ 2| 0 0 0] [--+--------] [ 0| 0 0 10] [ 0| 1 0 -1] [ 0| 0 1 0] sage: A.rational_form(format='bottom') [ 2| 0 0 0] [--+--------] [ 0| 0 1 0] [ 0| 0 0 1] [ 0|10 -1 0] sage: A.rational_form(format='left') [ 2| 0 0 0] [--+--------] [ 0| 0 1 0] [ 0|-1 0 1] [ 0|10 0 0] sage: A.rational_form(format='top') [ 2| 0 0 0] [--+--------] [ 0| 0 -1 10] [ 0| 1 0 0] [ 0| 0 1 0]
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(35), -Integer(18), -Integer(2), -Integer(45)], ... [Integer(22), -Integer(22), Integer(12), -Integer(16)], ... [ Integer(5), -Integer(12), Integer(12), Integer(4)], ... [Integer(16), -Integer(6), -Integer(4), -Integer(23)]]) >>> A.rational_form(format='right') [ 2| 0 0 0] [--+--------] [ 0| 0 0 10] [ 0| 1 0 -1] [ 0| 0 1 0] >>> A.rational_form(format='bottom') [ 2| 0 0 0] [--+--------] [ 0| 0 1 0] [ 0| 0 0 1] [ 0|10 -1 0] >>> A.rational_form(format='left') [ 2| 0 0 0] [--+--------] [ 0| 0 1 0] [ 0|-1 0 1] [ 0|10 0 0] >>> A.rational_form(format='top') [ 2| 0 0 0] [--+--------] [ 0| 0 -1 10] [ 0| 1 0 0] [ 0| 0 1 0]
A = matrix(QQ, [[35, -18, -2, -45], [22, -22, 12, -16], [ 5, -12, 12, 4], [16, -6, -4, -23]]) A.rational_form(format='right') A.rational_form(format='bottom') A.rational_form(format='left') A.rational_form(format='top')
- restrict(V, check=True)[source]¶
Return the matrix that defines the action of
selfon the chosen basis for the invariant subspace V. If V is an ambient, returnsself(not a copy of self).INPUT:
V– vector subspacecheck– boolean (default:True); ifFalsemay not check that V is invariant (hence can be faster)
OUTPUT: a matrix
Warning
This function returns an nxn matrix, where V has dimension n. It does not check that V is in fact invariant under self, unless check is True.
EXAMPLES:
sage: V = VectorSpace(QQ, 3) sage: M = MatrixSpace(QQ, 3) sage: A = M([1,2,0, 3,4,0, 0,0,0]) sage: W = V.subspace([[1,0,0], [0,1,0]]) sage: A.restrict(W) [1 2] [3 4] sage: A.restrict(W, check=True) [1 2] [3 4]
>>> from sage.all import * >>> V = VectorSpace(QQ, Integer(3)) >>> M = MatrixSpace(QQ, Integer(3)) >>> A = M([Integer(1),Integer(2),Integer(0), Integer(3),Integer(4),Integer(0), Integer(0),Integer(0),Integer(0)]) >>> W = V.subspace([[Integer(1),Integer(0),Integer(0)], [Integer(0),Integer(1),Integer(0)]]) >>> A.restrict(W) [1 2] [3 4] >>> A.restrict(W, check=True) [1 2] [3 4]
V = VectorSpace(QQ, 3) M = MatrixSpace(QQ, 3) A = M([1,2,0, 3,4,0, 0,0,0]) W = V.subspace([[1,0,0], [0,1,0]]) A.restrict(W) A.restrict(W, check=True)
We illustrate the warning about invariance not being checked by default, by giving a non-invariant subspace. With the default check=False this function returns the ‘restriction’ matrix, which is meaningless as check=True reveals.
sage: W2 = V.subspace([[1,0,0], [0,1,1]]) sage: A.restrict(W2, check=False) [1 2] [3 4] sage: A.restrict(W2, check=True) Traceback (most recent call last): ... ArithmeticError: subspace is not invariant under matrix
>>> from sage.all import * >>> W2 = V.subspace([[Integer(1),Integer(0),Integer(0)], [Integer(0),Integer(1),Integer(1)]]) >>> A.restrict(W2, check=False) [1 2] [3 4] >>> A.restrict(W2, check=True) Traceback (most recent call last): ... ArithmeticError: subspace is not invariant under matrix
W2 = V.subspace([[1,0,0], [0,1,1]]) A.restrict(W2, check=False) A.restrict(W2, check=True)
- restrict_codomain(V)[source]¶
Suppose that
selfdefines a linear map from some domain to a codomain that contains \(V\) and that the image ofselfis contained in \(V\). This function returns a new matrix \(A\) that represents this linear map but as a map to \(V\), in the sense that if \(x\) is in the domain, then \(xA\) is the linear combination of the elements of the basis of \(V\) that equals v*self.INPUT:
V– vector space (space of degreeself.ncols()) that contains the image ofself
See also
EXAMPLES:
sage: A = matrix(QQ, 3, [1..9]) sage: V = (QQ^3).span([[1,2,3], [7,8,9]]); V Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1] [ 0 1 2] sage: z = vector(QQ,[1,2,5]) sage: B = A.restrict_codomain(V); B [1 2] [4 5] [7 8] sage: z*B (44, 52) sage: z*A (44, 52, 60) sage: 44*V.0 + 52*V.1 (44, 52, 60)
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), (ellipsis_range(Integer(1),Ellipsis,Integer(9)))) >>> V = (QQ**Integer(3)).span([[Integer(1),Integer(2),Integer(3)], [Integer(7),Integer(8),Integer(9)]]); V Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1] [ 0 1 2] >>> z = vector(QQ,[Integer(1),Integer(2),Integer(5)]) >>> B = A.restrict_codomain(V); B [1 2] [4 5] [7 8] >>> z*B (44, 52) >>> z*A (44, 52, 60) >>> Integer(44)*V.gen(0) + Integer(52)*V.gen(1) (44, 52, 60)
A = matrix(QQ, 3, [1..9]) V = (QQ^3).span([[1,2,3], [7,8,9]]); V z = vector(QQ,[1,2,5]) B = A.restrict_codomain(V); B z*B z*A 44*V.0 + 52*V.1
- restrict_domain(V)[source]¶
Compute the matrix relative to the basis for V on the domain obtained by restricting
selfto V, but not changing the codomain of the matrix. This is the matrix whose rows are the images of the basis for V.INPUT:
V– vector space (subspace of ambient space on whichselfacts)
See also
EXAMPLES:
sage: V = QQ^3 sage: A = matrix(QQ, 3, [1,2,0, 3,4,0, 0,0,0]) sage: W = V.subspace([[1,0,0], [1,2,3]]) sage: A.restrict_domain(W) [1 2 0] [3 4 0] sage: W2 = V.subspace_with_basis([[1,0,0], [1,2,3]]) sage: A.restrict_domain(W2) [ 1 2 0] [ 7 10 0]
>>> from sage.all import * >>> V = QQ**Integer(3) >>> A = matrix(QQ, Integer(3), [Integer(1),Integer(2),Integer(0), Integer(3),Integer(4),Integer(0), Integer(0),Integer(0),Integer(0)]) >>> W = V.subspace([[Integer(1),Integer(0),Integer(0)], [Integer(1),Integer(2),Integer(3)]]) >>> A.restrict_domain(W) [1 2 0] [3 4 0] >>> W2 = V.subspace_with_basis([[Integer(1),Integer(0),Integer(0)], [Integer(1),Integer(2),Integer(3)]]) >>> A.restrict_domain(W2) [ 1 2 0] [ 7 10 0]
V = QQ^3 A = matrix(QQ, 3, [1,2,0, 3,4,0, 0,0,0]) W = V.subspace([[1,0,0], [1,2,3]]) A.restrict_domain(W) W2 = V.subspace_with_basis([[1,0,0], [1,2,3]]) A.restrict_domain(W2)
- right_eigenmatrix(other=None)[source]¶
Return matrices \(D\) and \(P\), where \(D\) is a diagonal matrix of eigenvalues and the columns of \(P\) are corresponding eigenvectors (or zero vectors).
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved
OUTPUT:
If
selfis a square matrix \(A\), then the output is a diagonal matrix \(D\) and a matrix \(P\) such that\[A P = P D,\]where the columns of \(P\) are eigenvectors of \(A\) and the diagonal entries of \(D\) are the corresponding eigenvalues.
If a matrix \(B\) is passed as optional argument, the output is a solution to the generalized eigenvalue problem such that
\[A P = B P D.\]The ordinary eigenvalue problem is equivalent to the generalized one if \(B\) is the identity matrix.
The generalized eigenvector decomposition is currently only implemented for matrices over
RDFandCDF.EXAMPLES:
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: D, P = A.eigenmatrix_right() sage: D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] sage: P [ 1 1 1] [ -2 0.1303061543300932? 3.069693845669907?] [ 1 -0.7393876913398137? 5.139387691339814?] sage: A*P == P*D True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> D, P = A.eigenmatrix_right() >>> D [ 0 0 0] [ 0 -1.348469228349535? 0] [ 0 0 13.34846922834954?] >>> P [ 1 1 1] [ -2 0.1303061543300932? 3.069693845669907?] [ 1 -0.7393876913398137? 5.139387691339814?] >>> A*P == P*D True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A D, P = A.eigenmatrix_right() D P A*P == P*D
Because \(P\) is invertible, \(A\) is diagonalizable.
sage: A == P*D*(~P) # needs sage.rings.number_field True
>>> from sage.all import * >>> A == P*D*(~P) # needs sage.rings.number_field True
A == P*D*(~P) # needs sage.rings.number_field
The matrix \(P\) may contain zero columns corresponding to eigenvalues for which the algebraic multiplicity is greater than the geometric multiplicity. In these cases, the matrix is not diagonalizable.
sage: # needs sage.rings.number_field sage: A = jordan_block(2, 3); A [2 1 0] [0 2 1] [0 0 2] sage: D, P = A.eigenmatrix_right() sage: D [2 0 0] [0 2 0] [0 0 2] sage: P [1 0 0] [0 0 0] [0 0 0] sage: A*P == P*D True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = jordan_block(Integer(2), Integer(3)); A [2 1 0] [0 2 1] [0 0 2] >>> D, P = A.eigenmatrix_right() >>> D [2 0 0] [0 2 0] [0 0 2] >>> P [1 0 0] [0 0 0] [0 0 0] >>> A*P == P*D True
# needs sage.rings.number_field A = jordan_block(2, 3); A D, P = A.eigenmatrix_right() D P A*P == P*D
A generalized eigenvector decomposition:
sage: # needs scipy sage: A = matrix(RDF, [[1, -2], [3, 4]]) sage: B = matrix(RDF, [[0, 7], [2, -3]]) sage: D, P = A.eigenmatrix_right(B) sage: (A * P - B * P * D).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy >>> A = matrix(RDF, [[Integer(1), -Integer(2)], [Integer(3), Integer(4)]]) >>> B = matrix(RDF, [[Integer(0), Integer(7)], [Integer(2), -Integer(3)]]) >>> D, P = A.eigenmatrix_right(B) >>> (A * P - B * P * D).norm() < RealNumber('1e-14') True
# needs scipy A = matrix(RDF, [[1, -2], [3, 4]]) B = matrix(RDF, [[0, 7], [2, -3]]) D, P = A.eigenmatrix_right(B) (A * P - B * P * D).norm() < 1e-14
The matrix \(B\) in a generalized eigenvalue problem may be singular:
sage: # needs scipy sage: A = matrix.identity(RDF, 2) sage: B = matrix(RDF, [[3, 5], [6, 10]]) sage: D, P = A.eigenmatrix_right(B); D # tol 1e-14 [0.07692307692307694 0.0] [ 0.0 +infinity]
>>> from sage.all import * >>> # needs scipy >>> A = matrix.identity(RDF, Integer(2)) >>> B = matrix(RDF, [[Integer(3), Integer(5)], [Integer(6), Integer(10)]]) >>> D, P = A.eigenmatrix_right(B); D # tol 1e-14 [0.07692307692307694 0.0] [ 0.0 +infinity]
# needs scipy A = matrix.identity(RDF, 2) B = matrix(RDF, [[3, 5], [6, 10]]) D, P = A.eigenmatrix_right(B); D # tol 1e-14
In this case, we can still verify the eigenvector equation for the first eigenvalue and first eigenvector:
sage: # needs scipy sage: l = D[0, 0] sage: v = P[:, 0] sage: (A * v - B * v * l).norm() < 1e-14 True
>>> from sage.all import * >>> # needs scipy >>> l = D[Integer(0), Integer(0)] >>> v = P[:, Integer(0)] >>> (A * v - B * v * l).norm() < RealNumber('1e-14') True
# needs scipy l = D[0, 0] v = P[:, 0] (A * v - B * v * l).norm() < 1e-14
The second eigenvector is contained in the right kernel of \(B\):
sage: (B * P[:, 1]).norm() < 1e-14 # needs scipy True
>>> from sage.all import * >>> (B * P[:, Integer(1)]).norm() < RealNumber('1e-14') # needs scipy True
(B * P[:, 1]).norm() < 1e-14 # needs scipy
- right_eigenspaces(format='all', var='a', algebraic_multiplicity=False)[source]¶
Compute the right eigenspaces of a matrix.
Note that
eigenspaces_right()andright_eigenspaces()are identical methods. Here “right” refers to the eigenvectors being placed to the right of the matrix.INPUT:
self– a square matrix over an exact field. For inexact matrices consult the numerical or symbolic matrix classesformat– (default:None)'all'– attempts to create every eigenspace. This will always be possible for matrices with rational entries'galois'– for each irreducible factor of the characteristic polynomial, a single eigenspace will be output for a single root/eigenvalue for the irreducible factorNone– uses the ‘all’ format if the base ring is contained in an algebraically closed field which is implemented. Otherwise, uses the ‘galois’ format.
var– (default:'a') variable name used to represent elements of the root field of each irreducible factor of the characteristic polynomial. If var=’a’, then the root fields will be in terms of a0, a1, a2, …., where the numbering runs across all the irreducible factors of the characteristic polynomial, even for linear factors.algebraic_multiplicity– (default:False) whether or not to include the algebraic multiplicity of each eigenvalue in the output. See the discussion below.
OUTPUT:
If algebraic_multiplicity=False, return a list of pairs (e, V) where e is an eigenvalue of the matrix, and V is the corresponding left eigenspace. For Galois conjugates of eigenvalues, there may be just one representative eigenspace, depending on the
formatkeyword.If algebraic_multiplicity=True, return a list of triples (e, V, n) where e and V are as above and n is the algebraic multiplicity of the eigenvalue.
Warning
Uses a somewhat naive algorithm (simply factors the characteristic polynomial and computes kernels directly over the extension field).
EXAMPLES:
Right eigenspaces are computed from the left eigenspaces of the transpose of the matrix. As such, there is a greater collection of illustrative examples at the
eigenspaces_left().We compute the right eigenspaces of a \(3\times 3\) rational matrix.
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.eigenspaces_right() [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.1303061543300932? -0.7393876913398137?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 3.069693845669907? 5.139387691339814?]) ] sage: es = A.eigenspaces_right(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ] sage: es = A.eigenspaces_right(format='galois', ....: algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5], 1) ] sage: e, v, n = es[0]; v = v.basis()[0] sage: delta = v*e - A*v sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.eigenspaces_right() [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (-1.348469228349535?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 0.1303061543300932? -0.7393876913398137?]), (13.34846922834954?, Vector space of degree 3 and dimension 1 over Algebraic Field User basis matrix: [ 1 3.069693845669907? 5.139387691339814?]) ] >>> es = A.eigenspaces_right(format='galois'); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ] >>> es = A.eigenspaces_right(format='galois', ... algebraic_multiplicity=True); es [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1], 1), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5], 1) ] >>> e, v, n = es[Integer(0)]; v = v.basis()[Integer(0)] >>> delta = v*e - A*v >>> abs(abs(delta)) < RealNumber('1e-10') True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A A.eigenspaces_right() es = A.eigenspaces_right(format='galois'); es es = A.eigenspaces_right(format='galois', algebraic_multiplicity=True); es e, v, n = es[0]; v = v.basis()[0] delta = v*e - A*v abs(abs(delta)) < 1e-10The same computation, but with implicit base change to a field:
sage: A = matrix(ZZ, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.eigenspaces_right(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ]
>>> from sage.all import * >>> A = matrix(ZZ, Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.eigenspaces_right(format='galois') # needs sage.rings.number_field [ (0, Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1]), (a1, Vector space of degree 3 and dimension 1 over Number Field in a1 with defining polynomial x^2 - 12*x - 18 User basis matrix: [ 1 1/5*a1 + 2/5 2/5*a1 - 1/5]) ]
A = matrix(ZZ, 3, range(9)); A A.eigenspaces_right(format='galois') # needs sage.rings.number_field
This method is only applicable to exact matrices. The “eigenmatrix” routines for matrices with double-precision floating-point entries (
RDF,CDF) are the best alternative. (Since some platforms return eigenvectors that are the negatives of those given here, this one example is not tested here.) There are also “eigenmatrix” routines for matrices with symbolic entries.sage: B = matrix(RR, 3, 3, range(9)) sage: B.eigenspaces_right() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options sage: # needs scipy sage: em = B.change_ring(RDF).eigenmatrix_right() sage: eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] sage: eigenvectors = em[1]; eigenvectors # not tested [ 0.164763817... 0.799699663... 0.408248290...] [ 0.505774475... 0.104205787... -0.816496580...] [ 0.846785134... -0.591288087... 0.408248290...] sage: # needs sage.symbolic sage: x, y = var('x y') sage: S = matrix([[x, y], [y, 3*x^2]]) sage: em = S.eigenmatrix_right() sage: eigenvalues = em[0]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] sage: eigenvectors = em[1]; eigenvectors [ 1 1] [1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
>>> from sage.all import * >>> B = matrix(RR, Integer(3), Integer(3), range(Integer(9))) >>> B.eigenspaces_right() Traceback (most recent call last): ... NotImplementedError: eigenspaces cannot be computed reliably for inexact rings such as Real Field with 53 bits of precision, consult numerical or symbolic matrix classes for other options >>> # needs scipy >>> em = B.change_ring(RDF).eigenmatrix_right() >>> eigenvalues = em[Integer(0)]; eigenvalues.dense_matrix() # abs tol 1e-13 [13.348469228349522 0.0 0.0] [ 0.0 -1.348469228349534 0.0] [ 0.0 0.0 0.0] >>> eigenvectors = em[Integer(1)]; eigenvectors # not tested [ 0.164763817... 0.799699663... 0.408248290...] [ 0.505774475... 0.104205787... -0.816496580...] [ 0.846785134... -0.591288087... 0.408248290...] >>> # needs sage.symbolic >>> x, y = var('x y') >>> S = matrix([[x, y], [y, Integer(3)*x**Integer(2)]]) >>> em = S.eigenmatrix_right() >>> eigenvalues = em[Integer(0)]; eigenvalues [3/2*x^2 + 1/2*x - 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2) 0] [ 0 3/2*x^2 + 1/2*x + 1/2*sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2)] >>> eigenvectors = em[Integer(1)]; eigenvectors [ 1 1] [1/2*(3*x^2 - x - sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y 1/2*(3*x^2 - x + sqrt(9*x^4 - 6*x^3 + x^2 + 4*y^2))/y]
B = matrix(RR, 3, 3, range(9)) B.eigenspaces_right() # needs scipy em = B.change_ring(RDF).eigenmatrix_right() eigenvalues = em[0]; eigenvalues.dense_matrix() # abs tol 1e-13 eigenvectors = em[1]; eigenvectors # not tested # needs sage.symbolic x, y = var('x y') S = matrix([[x, y], [y, 3*x^2]]) em = S.eigenmatrix_right() eigenvalues = em[0]; eigenvalues eigenvectors = em[1]; eigenvectors
- right_eigenvectors(other=None, extend=True)[source]¶
Compute the right eigenvectors of a matrix.
INPUT:
other– a square matrix \(B\) (default:None) in a generalized eigenvalue problem; ifNone, an ordinary eigenvalue problem is solved (currently supported only if the base ring ofselfisRDForCDF)extend– boolean (default:True)
OUTPUT:
For each distinct eigenvalue, returns a list of the form (e,V,n) where e is the eigenvalue, V is a list of eigenvectors forming a basis for the corresponding right eigenspace, and n is the algebraic multiplicity of the eigenvalue. If
extend = True(the default), this will return eigenspaces over the algebraic closure of the base field where this is implemented; otherwise it will restrict to eigenvalues in the base field.EXAMPLES:
We compute the right eigenvectors of a \(3\times 3\) rational matrix.
sage: # needs sage.rings.number_field sage: A = matrix(QQ, 3, 3, range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: es = A.eigenvectors_right(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.1303061543300932?, -0.7393876913398137?)], 1), (13.34846922834954?, [(1, 3.069693845669907?, 5.139387691339814?)], 1)] sage: A.eigenvectors_right(extend=False) [(0, [ (1, -2, 1) ], 1)] sage: eval, [evec], mult = es[0] sage: delta = eval*evec - A*evec sage: abs(abs(delta)) < 1e-10 True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> es = A.eigenvectors_right(); es [(0, [ (1, -2, 1) ], 1), (-1.348469228349535?, [(1, 0.1303061543300932?, -0.7393876913398137?)], 1), (13.34846922834954?, [(1, 3.069693845669907?, 5.139387691339814?)], 1)] >>> A.eigenvectors_right(extend=False) [(0, [ (1, -2, 1) ], 1)] >>> eval, [evec], mult = es[Integer(0)] >>> delta = eval*evec - A*evec >>> abs(abs(delta)) < RealNumber('1e-10') True
# needs sage.rings.number_field A = matrix(QQ, 3, 3, range(9)); A es = A.eigenvectors_right(); es A.eigenvectors_right(extend=False) eval, [evec], mult = es[0] delta = eval*evec - A*evec abs(abs(delta)) < 1e-10
- right_kernel(*args, **kwds)[source]¶
Return the right kernel of this matrix, as a vector space or free module. This is the set of vectors
xsuch thatself*x = 0.Note
For the left kernel, use
left_kernel(). The methodkernel()is exactly equal toleft_kernel().For inexact rings use
right_kernel_matrix()withbasis='computed'to avoid echelonizing.INPUT:
algorithm– (default:'default') a keyword that selects the algorithm employed. Allowable values are:'default'– allows the algorithm to be chosen automatically'generic'– naive algorithm usable for matrices over any field'flint'– FLINT library code for matrices over the rationals or the integers'pari'– PARI library code for matrices over number fields or the integers'padic'– padic algorithm from IML library for matrices over the rationals and integers'pluq'– PLUQ matrix factorization for matrices mod 2
basis– (default:'echelon') a keyword that describes the format of the basis used to construct the right kernel. Allowable values are:‘echelon’: the basis matrix is returned in echelon form
‘pivot’ : each basis vector is computed from the reduced row-echelon form of
selfby placing a single one in a non-pivot column and zeros in the remaining non-pivot columns. Only available for matrices over fields.‘LLL’: an LLL-reduced basis. Only available for matrices over the integers.
OUTPUT:
A vector space or free module whose degree equals the number of columns in
selfand which contains all the vectorsxsuch thatself*x = 0.If
selfhas 0 columns, the kernel has dimension 0, while ifselfhas 0 rows the kernel is the entire ambient vector space.The result is cached. Requesting the right kernel a second time, but with a different basis format, will return the cached result with the format from the first computation.
Note
For more detailed documentation on the selection of algorithms used and a more flexible method for computing a basis matrix for a right kernel (rather than computing a vector space), see
right_kernel_matrix(), which powers the computations for this method.EXAMPLES:
sage: A = matrix(QQ, [[0, 0, 1, 2, 2, -5, 3], ....: [-1, 5, 2, 2, 1, -7, 5], ....: [0, 0, -2, -3, -3, 8, -5], ....: [-1, 5, 0, -1, -2, 1, 0]]) sage: K = A.right_kernel(); K Vector space of degree 7 and dimension 4 over Rational Field Basis matrix: [ 1 0 0 0 -1 -1 -1] [ 0 1 0 0 5 5 5] [ 0 0 1 0 -1 -2 -3] [ 0 0 0 1 0 1 1] sage: A * K.basis_matrix().transpose() == zero_matrix(QQ, 4, 4) True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(0), Integer(0), Integer(1), Integer(2), Integer(2), -Integer(5), Integer(3)], ... [-Integer(1), Integer(5), Integer(2), Integer(2), Integer(1), -Integer(7), Integer(5)], ... [Integer(0), Integer(0), -Integer(2), -Integer(3), -Integer(3), Integer(8), -Integer(5)], ... [-Integer(1), Integer(5), Integer(0), -Integer(1), -Integer(2), Integer(1), Integer(0)]]) >>> K = A.right_kernel(); K Vector space of degree 7 and dimension 4 over Rational Field Basis matrix: [ 1 0 0 0 -1 -1 -1] [ 0 1 0 0 5 5 5] [ 0 0 1 0 -1 -2 -3] [ 0 0 0 1 0 1 1] >>> A * K.basis_matrix().transpose() == zero_matrix(QQ, Integer(4), Integer(4)) True
A = matrix(QQ, [[0, 0, 1, 2, 2, -5, 3], [-1, 5, 2, 2, 1, -7, 5], [0, 0, -2, -3, -3, 8, -5], [-1, 5, 0, -1, -2, 1, 0]]) K = A.right_kernel(); K A * K.basis_matrix().transpose() == zero_matrix(QQ, 4, 4)The default is basis vectors that form a matrix in echelon form. A “pivot basis” instead has a basis matrix where the columns of an identity matrix are in the locations of the non-pivot columns of the original matrix. This alternate format is available whenever the base ring is a field.
sage: A = matrix(QQ, [[0, 0, 1, 2, 2, -5, 3], ....: [-1, 5, 2, 2, 1, -7, 5], ....: [0, 0, -2, -3, -3, 8, -5], ....: [-1, 5, 0, -1, -2, 1, 0]]) sage: A.rref() [ 1 -5 0 0 1 1 -1] [ 0 0 1 0 0 -1 1] [ 0 0 0 1 1 -2 1] [ 0 0 0 0 0 0 0] sage: A.nonpivots() (1, 4, 5, 6) sage: K = A.right_kernel(basis='pivot'); K Vector space of degree 7 and dimension 4 over Rational Field User basis matrix: [ 5 1 0 0 0 0 0] [-1 0 0 -1 1 0 0] [-1 0 1 2 0 1 0] [ 1 0 -1 -1 0 0 1] sage: A * K.basis_matrix().transpose() == zero_matrix(QQ, 4, 4) True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(0), Integer(0), Integer(1), Integer(2), Integer(2), -Integer(5), Integer(3)], ... [-Integer(1), Integer(5), Integer(2), Integer(2), Integer(1), -Integer(7), Integer(5)], ... [Integer(0), Integer(0), -Integer(2), -Integer(3), -Integer(3), Integer(8), -Integer(5)], ... [-Integer(1), Integer(5), Integer(0), -Integer(1), -Integer(2), Integer(1), Integer(0)]]) >>> A.rref() [ 1 -5 0 0 1 1 -1] [ 0 0 1 0 0 -1 1] [ 0 0 0 1 1 -2 1] [ 0 0 0 0 0 0 0] >>> A.nonpivots() (1, 4, 5, 6) >>> K = A.right_kernel(basis='pivot'); K Vector space of degree 7 and dimension 4 over Rational Field User basis matrix: [ 5 1 0 0 0 0 0] [-1 0 0 -1 1 0 0] [-1 0 1 2 0 1 0] [ 1 0 -1 -1 0 0 1] >>> A * K.basis_matrix().transpose() == zero_matrix(QQ, Integer(4), Integer(4)) True
A = matrix(QQ, [[0, 0, 1, 2, 2, -5, 3], [-1, 5, 2, 2, 1, -7, 5], [0, 0, -2, -3, -3, 8, -5], [-1, 5, 0, -1, -2, 1, 0]]) A.rref() A.nonpivots() K = A.right_kernel(basis='pivot'); K A * K.basis_matrix().transpose() == zero_matrix(QQ, 4, 4)Matrices may have any field as a base ring. Number fields are computed by PARI library code, matrices over \(GF(2)\) are computed by the M4RI library, and matrices over the rationals are computed by the IML library. For any of these specialized cases, general-purpose code can be called instead with the keyword setting
algorithm='generic'.Over an arbitrary field, with two basis formats. Same vector space, different bases.
sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(5^2) sage: A = matrix(F, 3, 4, [[ 1, a, 1+a, a^3+a^5], ....: [ a, a^4, a+a^4, a^4+a^8], ....: [a^2, a^6, a^2+a^6, a^5+a^10]]) sage: K = A.right_kernel(); K Vector space of degree 4 and dimension 2 over Finite Field in a of size 5^2 Basis matrix: [ 1 0 3*a + 4 2*a + 2] [ 0 1 2*a 3*a + 3] sage: A * K.basis_matrix().transpose() == zero_matrix(F, 3, 2) True
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(5)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, Integer(3), Integer(4), [[ Integer(1), a, Integer(1)+a, a**Integer(3)+a**Integer(5)], ... [ a, a**Integer(4), a+a**Integer(4), a**Integer(4)+a**Integer(8)], ... [a**Integer(2), a**Integer(6), a**Integer(2)+a**Integer(6), a**Integer(5)+a**Integer(10)]]) >>> K = A.right_kernel(); K Vector space of degree 4 and dimension 2 over Finite Field in a of size 5^2 Basis matrix: [ 1 0 3*a + 4 2*a + 2] [ 0 1 2*a 3*a + 3] >>> A * K.basis_matrix().transpose() == zero_matrix(F, Integer(3), Integer(2)) True
# needs sage.rings.finite_rings F.<a> = FiniteField(5^2) A = matrix(F, 3, 4, [[ 1, a, 1+a, a^3+a^5], [ a, a^4, a+a^4, a^4+a^8], [a^2, a^6, a^2+a^6, a^5+a^10]]) K = A.right_kernel(); K A * K.basis_matrix().transpose() == zero_matrix(F, 3, 2)In the following test, we have to force usage of
Matrix_generic_dense, since the optionbasis = 'pivot'would simply yield the same result as the previous test, if the optional meataxe package is installed.sage: from sage.matrix.matrix_generic_dense import Matrix_generic_dense sage: B = Matrix_generic_dense(A.parent(), A.list(), False, False) sage: P = B.right_kernel(basis='pivot'); P # needs sage.rings.finite_rings Vector space of degree 4 and dimension 2 over Finite Field in a of size 5^2 User basis matrix: [ 4 4 1 0] [ a + 2 3*a + 3 0 1]
>>> from sage.all import * >>> from sage.matrix.matrix_generic_dense import Matrix_generic_dense >>> B = Matrix_generic_dense(A.parent(), A.list(), False, False) >>> P = B.right_kernel(basis='pivot'); P # needs sage.rings.finite_rings Vector space of degree 4 and dimension 2 over Finite Field in a of size 5^2 User basis matrix: [ 4 4 1 0] [ a + 2 3*a + 3 0 1]
from sage.matrix.matrix_generic_dense import Matrix_generic_dense B = Matrix_generic_dense(A.parent(), A.list(), False, False) P = B.right_kernel(basis='pivot'); P # needs sage.rings.finite_rings
If the optional meataxe package is installed, we again have to make sure to work with a copy of B that has the same type as
P.basis_matrix():sage: (B.parent()(B.list()) * P.basis_matrix().transpose() # needs sage.rings.finite_rings ....: == zero_matrix(F, 3, 2)) True sage: K == P # needs sage.rings.finite_rings True
>>> from sage.all import * >>> (B.parent()(B.list()) * P.basis_matrix().transpose() # needs sage.rings.finite_rings ... == zero_matrix(F, Integer(3), Integer(2))) True >>> K == P # needs sage.rings.finite_rings True
(B.parent()(B.list()) * P.basis_matrix().transpose() # needs sage.rings.finite_rings == zero_matrix(F, 3, 2)) K == P # needs sage.rings.finite_rings
Over number fields, PARI is used by default, but general-purpose code can be requested. Same vector space, same bases, different code.:
sage: # needs sage.rings.number_field sage: Q = QuadraticField(-7) sage: a = Q.gen(0) sage: A = matrix(Q, [[ 2, 5 - a, 15 - a, 16 + 4*a], ....: [2 + a, a, -7 + 5*a, -3 + 3*a]]) sage: K = A.right_kernel(algorithm='default'); K Vector space of degree 4 and dimension 2 over Number Field in a with defining polynomial x^2 + 7 with a = 2.645751311064591?*I Basis matrix: [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] sage: A * K.basis_matrix().transpose() == zero_matrix(Q, 2, 2) True sage: B = copy(A) sage: G = A.right_kernel(algorithm='generic'); G Vector space of degree 4 and dimension 2 over Number Field in a with defining polynomial x^2 + 7 with a = 2.645751311064591?*I Basis matrix: [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] sage: B * G.basis_matrix().transpose() == zero_matrix(Q, 2, 2) True sage: K == G True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> Q = QuadraticField(-Integer(7)) >>> a = Q.gen(Integer(0)) >>> A = matrix(Q, [[ Integer(2), Integer(5) - a, Integer(15) - a, Integer(16) + Integer(4)*a], ... [Integer(2) + a, a, -Integer(7) + Integer(5)*a, -Integer(3) + Integer(3)*a]]) >>> K = A.right_kernel(algorithm='default'); K Vector space of degree 4 and dimension 2 over Number Field in a with defining polynomial x^2 + 7 with a = 2.645751311064591?*I Basis matrix: [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] >>> A * K.basis_matrix().transpose() == zero_matrix(Q, Integer(2), Integer(2)) True >>> B = copy(A) >>> G = A.right_kernel(algorithm='generic'); G Vector space of degree 4 and dimension 2 over Number Field in a with defining polynomial x^2 + 7 with a = 2.645751311064591?*I Basis matrix: [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] >>> B * G.basis_matrix().transpose() == zero_matrix(Q, Integer(2), Integer(2)) True >>> K == G True
# needs sage.rings.number_field Q = QuadraticField(-7) a = Q.gen(0) A = matrix(Q, [[ 2, 5 - a, 15 - a, 16 + 4*a], [2 + a, a, -7 + 5*a, -3 + 3*a]]) K = A.right_kernel(algorithm='default'); K A * K.basis_matrix().transpose() == zero_matrix(Q, 2, 2) B = copy(A) G = A.right_kernel(algorithm='generic'); G B * G.basis_matrix().transpose() == zero_matrix(Q, 2, 2) K == GFor matrices over the integers, several options are possible. The basis can be an LLL-reduced basis or an echelon basis. The pivot basis isnot available. A heuristic will decide whether to use a \(p\)-adic algorithm from the IML library or an algorithm from the PARI library. Note how specifying the algorithm can mildly influence the LLL basis.
sage: A = matrix(ZZ, [[0, -1, -1, 2, 9, 4, -4], ....: [-1, 1, 0, -2, -7, -1, 6], ....: [2, 0, 1, 0, 1, -5, -2], ....: [-1, -1, -1, 3, 10, 10, -9], ....: [-1, 2, 0, -3, -7, 1, 6]]) sage: A.right_kernel(basis='echelon') Free module of degree 7 and rank 2 over Integer Ring Echelon basis matrix: [ 1 5 -8 3 -1 -1 -1] [ 0 11 -19 5 -2 -3 -3] sage: B = copy(A) sage: B.right_kernel(basis='LLL') Free module of degree 7 and rank 2 over Integer Ring User basis matrix: [ 2 -1 3 1 0 1 1] [-5 -3 2 -5 1 -1 -1] sage: C = copy(A) sage: C.right_kernel(basis='pivot') Traceback (most recent call last): ... ValueError: pivot basis only available over a field, not over Integer Ring sage: D = copy(A) sage: D.right_kernel(algorithm='pari') Free module of degree 7 and rank 2 over Integer Ring Echelon basis matrix: [ 1 5 -8 3 -1 -1 -1] [ 0 11 -19 5 -2 -3 -3] sage: E = copy(A) sage: E.right_kernel(algorithm='padic', basis='LLL') Free module of degree 7 and rank 2 over Integer Ring User basis matrix: [-2 1 -3 -1 0 -1 -1] [ 5 3 -2 5 -1 1 1]
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(0), -Integer(1), -Integer(1), Integer(2), Integer(9), Integer(4), -Integer(4)], ... [-Integer(1), Integer(1), Integer(0), -Integer(2), -Integer(7), -Integer(1), Integer(6)], ... [Integer(2), Integer(0), Integer(1), Integer(0), Integer(1), -Integer(5), -Integer(2)], ... [-Integer(1), -Integer(1), -Integer(1), Integer(3), Integer(10), Integer(10), -Integer(9)], ... [-Integer(1), Integer(2), Integer(0), -Integer(3), -Integer(7), Integer(1), Integer(6)]]) >>> A.right_kernel(basis='echelon') Free module of degree 7 and rank 2 over Integer Ring Echelon basis matrix: [ 1 5 -8 3 -1 -1 -1] [ 0 11 -19 5 -2 -3 -3] >>> B = copy(A) >>> B.right_kernel(basis='LLL') Free module of degree 7 and rank 2 over Integer Ring User basis matrix: [ 2 -1 3 1 0 1 1] [-5 -3 2 -5 1 -1 -1] >>> C = copy(A) >>> C.right_kernel(basis='pivot') Traceback (most recent call last): ... ValueError: pivot basis only available over a field, not over Integer Ring >>> D = copy(A) >>> D.right_kernel(algorithm='pari') Free module of degree 7 and rank 2 over Integer Ring Echelon basis matrix: [ 1 5 -8 3 -1 -1 -1] [ 0 11 -19 5 -2 -3 -3] >>> E = copy(A) >>> E.right_kernel(algorithm='padic', basis='LLL') Free module of degree 7 and rank 2 over Integer Ring User basis matrix: [-2 1 -3 -1 0 -1 -1] [ 5 3 -2 5 -1 1 1]
A = matrix(ZZ, [[0, -1, -1, 2, 9, 4, -4], [-1, 1, 0, -2, -7, -1, 6], [2, 0, 1, 0, 1, -5, -2], [-1, -1, -1, 3, 10, 10, -9], [-1, 2, 0, -3, -7, 1, 6]]) A.right_kernel(basis='echelon') B = copy(A) B.right_kernel(basis='LLL') C = copy(A) C.right_kernel(basis='pivot') D = copy(A) D.right_kernel(algorithm='pari') E = copy(A) E.right_kernel(algorithm='padic', basis='LLL')Besides the integers, rings may be as general as principal ideal domains. Results are then free modules.
sage: R.<y> = QQ[] sage: A = matrix(R, [[ 1, y, 1+y^2], ....: [y^3, y^2, 2*y^3]]) sage: K = A.right_kernel(algorithm='default', basis='echelon'); K Free module of degree 3 and rank 1 over Univariate Polynomial Ring in y over Rational Field Echelon basis matrix: [-1 -y 1] sage: A * K.basis_matrix().transpose() == zero_matrix(ZZ, 2, 1) True
>>> from sage.all import * >>> R = QQ['y']; (y,) = R._first_ngens(1) >>> A = matrix(R, [[ Integer(1), y, Integer(1)+y**Integer(2)], ... [y**Integer(3), y**Integer(2), Integer(2)*y**Integer(3)]]) >>> K = A.right_kernel(algorithm='default', basis='echelon'); K Free module of degree 3 and rank 1 over Univariate Polynomial Ring in y over Rational Field Echelon basis matrix: [-1 -y 1] >>> A * K.basis_matrix().transpose() == zero_matrix(ZZ, Integer(2), Integer(1)) True
R.<y> = QQ[] A = matrix(R, [[ 1, y, 1+y^2], [y^3, y^2, 2*y^3]]) K = A.right_kernel(algorithm='default', basis='echelon'); K A * K.basis_matrix().transpose() == zero_matrix(ZZ, 2, 1)It is possible to compute a kernel for a matrix over an integral domain which is not a PID, but usually this will fail.
sage: D.<x> = ZZ[] sage: A = matrix(D, 2, 2, [[x^2 - x, -x + 5], ....: [x^2 - 8, -x + 2]]) sage: A.right_kernel() Traceback (most recent call last): ... ArithmeticError: Ideal Ideal (x^2 - x, x^2 - 8) of Univariate Polynomial Ring in x over Integer Ring not principal
>>> from sage.all import * >>> D = ZZ['x']; (x,) = D._first_ngens(1) >>> A = matrix(D, Integer(2), Integer(2), [[x**Integer(2) - x, -x + Integer(5)], ... [x**Integer(2) - Integer(8), -x + Integer(2)]]) >>> A.right_kernel() Traceback (most recent call last): ... ArithmeticError: Ideal Ideal (x^2 - x, x^2 - 8) of Univariate Polynomial Ring in x over Integer Ring not principal
D.<x> = ZZ[] A = matrix(D, 2, 2, [[x^2 - x, -x + 5], [x^2 - 8, -x + 2]]) A.right_kernel()Matrices over non-commutative rings are not a good idea either. These are the “usual” quaternions.
sage: Q.<i,j,k> = QuaternionAlgebra(-1,-1) sage: A = matrix(Q, 2, [i,j,-1,k]) sage: A.right_kernel() Traceback (most recent call last): ... NotImplementedError: Cannot compute a matrix kernel over Quaternion Algebra (-1, -1) with base ring Rational Field
>>> from sage.all import * >>> Q = QuaternionAlgebra(-Integer(1),-Integer(1), names=('i', 'j', 'k',)); (i, j, k,) = Q._first_ngens(3) >>> A = matrix(Q, Integer(2), [i,j,-Integer(1),k]) >>> A.right_kernel() Traceback (most recent call last): ... NotImplementedError: Cannot compute a matrix kernel over Quaternion Algebra (-1, -1) with base ring Rational Field
Q.<i,j,k> = QuaternionAlgebra(-1,-1) A = matrix(Q, 2, [i,j,-1,k]) A.right_kernel()
Sparse matrices, over the rationals and the integers, use the same routines as the dense versions.
sage: A = matrix(ZZ, [[0, -1, 1, 1, 2], ....: [1, -2, 0, 1, 3], ....: [-1, 2, 0, -1, -3]], ....: sparse=True) sage: A.right_kernel() Free module of degree 5 and rank 3 over Integer Ring Echelon basis matrix: [ 1 0 0 2 -1] [ 0 1 0 -1 1] [ 0 0 1 -3 1] sage: B = A.change_ring(QQ) sage: B.is_sparse() True sage: B.right_kernel() Vector space of degree 5 and dimension 3 over Rational Field Basis matrix: [ 1 0 0 2 -1] [ 0 1 0 -1 1] [ 0 0 1 -3 1]
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(0), -Integer(1), Integer(1), Integer(1), Integer(2)], ... [Integer(1), -Integer(2), Integer(0), Integer(1), Integer(3)], ... [-Integer(1), Integer(2), Integer(0), -Integer(1), -Integer(3)]], ... sparse=True) >>> A.right_kernel() Free module of degree 5 and rank 3 over Integer Ring Echelon basis matrix: [ 1 0 0 2 -1] [ 0 1 0 -1 1] [ 0 0 1 -3 1] >>> B = A.change_ring(QQ) >>> B.is_sparse() True >>> B.right_kernel() Vector space of degree 5 and dimension 3 over Rational Field Basis matrix: [ 1 0 0 2 -1] [ 0 1 0 -1 1] [ 0 0 1 -3 1]
A = matrix(ZZ, [[0, -1, 1, 1, 2], [1, -2, 0, 1, 3], [-1, 2, 0, -1, -3]], sparse=True) A.right_kernel() B = A.change_ring(QQ) B.is_sparse() B.right_kernel()With no columns, the kernel can only have dimension zero. With no rows, every possible vector is in the kernel.
sage: A = matrix(QQ, 2, 0) sage: A.right_kernel() Vector space of degree 0 and dimension 0 over Rational Field Basis matrix: [] sage: A = matrix(QQ, 0, 2) sage: A.right_kernel() Vector space of degree 2 and dimension 2 over Rational Field Basis matrix: [1 0] [0 1]
>>> from sage.all import * >>> A = matrix(QQ, Integer(2), Integer(0)) >>> A.right_kernel() Vector space of degree 0 and dimension 0 over Rational Field Basis matrix: [] >>> A = matrix(QQ, Integer(0), Integer(2)) >>> A.right_kernel() Vector space of degree 2 and dimension 2 over Rational Field Basis matrix: [1 0] [0 1]
A = matrix(QQ, 2, 0) A.right_kernel() A = matrix(QQ, 0, 2) A.right_kernel()
Every vector is in the kernel of a zero matrix, the dimension is the number of columns.
sage: A = zero_matrix(QQ, 10, 20) sage: A.right_kernel() Vector space of degree 20 and dimension 20 over Rational Field Basis matrix: 20 x 20 dense matrix over Rational Field
>>> from sage.all import * >>> A = zero_matrix(QQ, Integer(10), Integer(20)) >>> A.right_kernel() Vector space of degree 20 and dimension 20 over Rational Field Basis matrix: 20 x 20 dense matrix over Rational Field
A = zero_matrix(QQ, 10, 20) A.right_kernel()
Results are cached as the right kernel of the matrix. Subsequent requests for the right kernel will return the cached result, without regard for new values of the algorithm or format keyword. Work with a copy if you need a new right kernel, or perhaps investigate the
right_kernel_matrix()method, which does not cache its results and is more flexible.sage: A = matrix(QQ, 3, 3, range(9)) sage: K1 = A.right_kernel(basis='echelon') sage: K1 Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [ 1 -2 1] sage: K2 = A.right_kernel(basis='pivot') sage: K2 Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [ 1 -2 1] sage: K1 is K2 True sage: B = copy(A) sage: K3 = B.kernel(basis='pivot') sage: K3 Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1] sage: K3 is K1 False sage: K3 == K1 True
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9))) >>> K1 = A.right_kernel(basis='echelon') >>> K1 Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [ 1 -2 1] >>> K2 = A.right_kernel(basis='pivot') >>> K2 Vector space of degree 3 and dimension 1 over Rational Field Basis matrix: [ 1 -2 1] >>> K1 is K2 True >>> B = copy(A) >>> K3 = B.kernel(basis='pivot') >>> K3 Vector space of degree 3 and dimension 1 over Rational Field User basis matrix: [ 1 -2 1] >>> K3 is K1 False >>> K3 == K1 True
A = matrix(QQ, 3, 3, range(9)) K1 = A.right_kernel(basis='echelon') K1 K2 = A.right_kernel(basis='pivot') K2 K1 is K2 B = copy(A) K3 = B.kernel(basis='pivot') K3 K3 is K1 K3 == K1
- right_kernel_matrix(*args, **kwds)[source]¶
Return a matrix whose rows form a basis for the right kernel of
self.INPUT:
algorithm– (default:'default') a keyword that selects the algorithm employed. Allowable values are:'default'– allows the algorithm to be chosen automatically'generic'– naive algorithm usable for matrices over any field'flint'– FLINT library code for matrices over the rationals or the integers'pari'– PARI library code for matrices over number fields or the integers'padic'– padic algorithm from IML library for matrices over the rationals and integers'pluq'– PLUQ matrix factorization for matrices mod 2
basis– (default:'default') a keyword that describes the format of the basis returned. Allowable values are:‘default’: uses ‘echelon’ over fields; ‘computed’ otherwise.
‘echelon’: the basis matrix is returned in echelon form.
‘pivot’ : each basis vector is computed from the reduced row-echelon form of
selfby placing a single one in a non-pivot column and zeros in the remaining non-pivot columns. Only available for matrices over fields.‘LLL’: an LLL-reduced basis. Only available for matrices over the integers.
‘computed’: no work is done to transform the basis, it is returned exactly as provided by whichever routine actually computed the basis. Request this for the least possible computation possible, but with no guarantees about the format of the basis. This option is recommended for inexact rings.
OUTPUT:
A matrix
Xwhose rows are an independent set spanning the right kernel ofself. Soself*X.transpose()is a zero matrix.The output varies depending on the choice of
algorithmand the format chosen bybasis.The results of this routine are not cached, so you can call it again with different options to get possibly different output (like the basis format). Conversely, repeated calls on the same matrix will always start from scratch.
Note
If you want to get the most basic description of a kernel, with a minimum of overhead, then ask for the right kernel matrix with the basis format requested as ‘computed’. You are then free to work with the output for whatever purpose. For a left kernel, call this method on the transpose of your matrix.
For greater convenience, plus cached results, request an actual vector space or free module with
right_kernel()orleft_kernel().EXAMPLES:
Over the Rational Numbers:
Kernels are computed by the IML library in
_right_kernel_matrix(). Setting the \(algorithm\) keyword to ‘default’, ‘padic’ or unspecified will yield the same result, as there is no optional behavior. The ‘computed’ format of the basis vectors are exactly the negatives of the vectors in the ‘pivot’ format.sage: A = matrix(QQ, [[1, 0, 1, -3, 1], ....: [-5, 1, 0, 7, -3], ....: [0, -1, -4, 6, -2], ....: [4, -1, 0, -6, 2]]) sage: C = A.right_kernel_matrix(algorithm='default', basis='computed'); C [-1 2 -2 -1 0] [ 1 2 0 0 -1] sage: A * C.transpose() == zero_matrix(QQ, 4, 2) True sage: P = A.right_kernel_matrix(algorithm='padic', basis='pivot'); P [ 1 -2 2 1 0] [-1 -2 0 0 1] sage: A * P.transpose() == zero_matrix(QQ, 4, 2) True sage: C == -P True sage: E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] sage: A * E.transpose() == zero_matrix(QQ, 4, 2) True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), Integer(0), Integer(1), -Integer(3), Integer(1)], ... [-Integer(5), Integer(1), Integer(0), Integer(7), -Integer(3)], ... [Integer(0), -Integer(1), -Integer(4), Integer(6), -Integer(2)], ... [Integer(4), -Integer(1), Integer(0), -Integer(6), Integer(2)]]) >>> C = A.right_kernel_matrix(algorithm='default', basis='computed'); C [-1 2 -2 -1 0] [ 1 2 0 0 -1] >>> A * C.transpose() == zero_matrix(QQ, Integer(4), Integer(2)) True >>> P = A.right_kernel_matrix(algorithm='padic', basis='pivot'); P [ 1 -2 2 1 0] [-1 -2 0 0 1] >>> A * P.transpose() == zero_matrix(QQ, Integer(4), Integer(2)) True >>> C == -P True >>> E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] >>> A * E.transpose() == zero_matrix(QQ, Integer(4), Integer(2)) True
A = matrix(QQ, [[1, 0, 1, -3, 1], [-5, 1, 0, 7, -3], [0, -1, -4, 6, -2], [4, -1, 0, -6, 2]]) C = A.right_kernel_matrix(algorithm='default', basis='computed'); C A * C.transpose() == zero_matrix(QQ, 4, 2) P = A.right_kernel_matrix(algorithm='padic', basis='pivot'); P A * P.transpose() == zero_matrix(QQ, 4, 2) C == -P E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E A * E.transpose() == zero_matrix(QQ, 4, 2)Since the rationals are a field, we can call the general code available for any field by using the ‘generic’ keyword.
sage: A = matrix(QQ, [[1, 0, 1, -3, 1], ....: [-5, 1, 0, 7, -3], ....: [0, -1, -4, 6, -2], ....: [4, -1, 0, -6, 2]]) sage: G = A.right_kernel_matrix(algorithm='generic', basis='echelon'); G [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] sage: A * G.transpose() == zero_matrix(QQ, 4, 2) True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), Integer(0), Integer(1), -Integer(3), Integer(1)], ... [-Integer(5), Integer(1), Integer(0), Integer(7), -Integer(3)], ... [Integer(0), -Integer(1), -Integer(4), Integer(6), -Integer(2)], ... [Integer(4), -Integer(1), Integer(0), -Integer(6), Integer(2)]]) >>> G = A.right_kernel_matrix(algorithm='generic', basis='echelon'); G [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] >>> A * G.transpose() == zero_matrix(QQ, Integer(4), Integer(2)) True
A = matrix(QQ, [[1, 0, 1, -3, 1], [-5, 1, 0, 7, -3], [0, -1, -4, 6, -2], [4, -1, 0, -6, 2]]) G = A.right_kernel_matrix(algorithm='generic', basis='echelon'); G A * G.transpose() == zero_matrix(QQ, 4, 2)We verify that the rational matrix code is called for both dense and sparse rational matrices, with equal result.
sage: A = matrix(QQ, [[1, 0, 1, -3, 1], ....: [-5, 1, 0, 7, -3], ....: [0, -1, -4, 6, -2], ....: [4, -1, 0, -6, 2]], ....: sparse=False) sage: B = copy(A).sparse_matrix() sage: from sage.misc.verbose import set_verbose sage: set_verbose(2) sage: D = A.right_kernel(); D verbose 2 (<module>) computing a right kernel for 4x5 matrix over Rational Field ... Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] sage: S = B.right_kernel(); S verbose 2 (<module>) computing a right kernel for 4x5 matrix over Rational Field ... Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] sage: set_verbose(0) sage: D == S True
>>> from sage.all import * >>> A = matrix(QQ, [[Integer(1), Integer(0), Integer(1), -Integer(3), Integer(1)], ... [-Integer(5), Integer(1), Integer(0), Integer(7), -Integer(3)], ... [Integer(0), -Integer(1), -Integer(4), Integer(6), -Integer(2)], ... [Integer(4), -Integer(1), Integer(0), -Integer(6), Integer(2)]], ... sparse=False) >>> B = copy(A).sparse_matrix() >>> from sage.misc.verbose import set_verbose >>> set_verbose(Integer(2)) >>> D = A.right_kernel(); D verbose 2 (<module>) computing a right kernel for 4x5 matrix over Rational Field ... Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] >>> S = B.right_kernel(); S verbose 2 (<module>) computing a right kernel for 4x5 matrix over Rational Field ... Vector space of degree 5 and dimension 2 over Rational Field Basis matrix: [ 1 0 1 1/2 -1/2] [ 0 1 -1/2 -1/4 -1/4] >>> set_verbose(Integer(0)) >>> D == S True
A = matrix(QQ, [[1, 0, 1, -3, 1], [-5, 1, 0, 7, -3], [0, -1, -4, 6, -2], [4, -1, 0, -6, 2]], sparse=False) B = copy(A).sparse_matrix() from sage.misc.verbose import set_verbose set_verbose(2) D = A.right_kernel(); D S = B.right_kernel(); S set_verbose(0) D == SOver Number Fields:
Kernels are by default computed by PARI, (except for exceptions like the rationals themselves). The raw results from PARI are a pivot basis, so the \(basis\) keywords ‘computed’ and ‘pivot’ will return the same results.
sage: # needs sage.rings.number_field sage: Q = QuadraticField(-7) sage: a = Q.gen(0) sage: A = matrix(Q, [[2, 5-a, 15-a, 16+4*a], ....: [2+a, a, -7 + 5*a, -3+3*a]]) sage: C = A.right_kernel_matrix(algorithm='default', basis='computed'); C [ -a -3 1 0] [ -2 -a - 1 0 1] sage: A*C.transpose() == zero_matrix(Q, 2, 2) True sage: P = A.right_kernel_matrix(algorithm='pari', basis='pivot'); P # needs sage.libs.pari [ -a -3 1 0] [ -2 -a - 1 0 1] sage: A*P.transpose() == zero_matrix(Q, 2, 2) # needs sage.libs.pari True sage: E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] sage: A*E.transpose() == zero_matrix(Q, 2, 2) True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> Q = QuadraticField(-Integer(7)) >>> a = Q.gen(Integer(0)) >>> A = matrix(Q, [[Integer(2), Integer(5)-a, Integer(15)-a, Integer(16)+Integer(4)*a], ... [Integer(2)+a, a, -Integer(7) + Integer(5)*a, -Integer(3)+Integer(3)*a]]) >>> C = A.right_kernel_matrix(algorithm='default', basis='computed'); C [ -a -3 1 0] [ -2 -a - 1 0 1] >>> A*C.transpose() == zero_matrix(Q, Integer(2), Integer(2)) True >>> P = A.right_kernel_matrix(algorithm='pari', basis='pivot'); P # needs sage.libs.pari [ -a -3 1 0] [ -2 -a - 1 0 1] >>> A*P.transpose() == zero_matrix(Q, Integer(2), Integer(2)) # needs sage.libs.pari True >>> E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] >>> A*E.transpose() == zero_matrix(Q, Integer(2), Integer(2)) True
# needs sage.rings.number_field Q = QuadraticField(-7) a = Q.gen(0) A = matrix(Q, [[2, 5-a, 15-a, 16+4*a], [2+a, a, -7 + 5*a, -3+3*a]]) C = A.right_kernel_matrix(algorithm='default', basis='computed'); C A*C.transpose() == zero_matrix(Q, 2, 2) P = A.right_kernel_matrix(algorithm='pari', basis='pivot'); P # needs sage.libs.pari A*P.transpose() == zero_matrix(Q, 2, 2) # needs sage.libs.pari E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E A*E.transpose() == zero_matrix(Q, 2, 2)We can bypass using PARI for number fields and use Sage’s general code for matrices over any field. The basis vectors as computed are in pivot format.
sage: # needs sage.rings.number_field sage: Q = QuadraticField(-7) sage: a = Q.gen(0) sage: A = matrix(Q, [[2, 5-a, 15-a, 16+4*a], [2+a, a, -7 + 5*a, -3+3*a]]) sage: G = A.right_kernel_matrix(algorithm='generic', basis='computed'); G [ -a -3 1 0] [ -2 -a - 1 0 1] sage: A*G.transpose() == zero_matrix(Q, 2, 2) True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> Q = QuadraticField(-Integer(7)) >>> a = Q.gen(Integer(0)) >>> A = matrix(Q, [[Integer(2), Integer(5)-a, Integer(15)-a, Integer(16)+Integer(4)*a], [Integer(2)+a, a, -Integer(7) + Integer(5)*a, -Integer(3)+Integer(3)*a]]) >>> G = A.right_kernel_matrix(algorithm='generic', basis='computed'); G [ -a -3 1 0] [ -2 -a - 1 0 1] >>> A*G.transpose() == zero_matrix(Q, Integer(2), Integer(2)) True
# needs sage.rings.number_field Q = QuadraticField(-7) a = Q.gen(0) A = matrix(Q, [[2, 5-a, 15-a, 16+4*a], [2+a, a, -7 + 5*a, -3+3*a]]) G = A.right_kernel_matrix(algorithm='generic', basis='computed'); G A*G.transpose() == zero_matrix(Q, 2, 2)
We check that number fields are handled by the right routine as part of typical right kernel computation.
sage: # needs sage.rings.number_field sage: Q = QuadraticField(-7) sage: a = Q.gen(0) sage: A = matrix(Q, [[2, 5-a, 15-a, 16+4*a], [2+a, a, -7 + 5*a, -3+3*a]]) sage: set_verbose(2) sage: A.right_kernel(algorithm='default') verbose ... verbose 2 (<module>) computing right kernel matrix over a number field for 2x4 matrix verbose 2 (<module>) done computing right kernel matrix over a number field for 2x4 matrix ... Vector space of degree 4 and dimension 2 over Number Field in a with defining polynomial x^2 + 7 with a = 2.645751311064591?*I Basis matrix: [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] sage: set_verbose(0)
>>> from sage.all import * >>> # needs sage.rings.number_field >>> Q = QuadraticField(-Integer(7)) >>> a = Q.gen(Integer(0)) >>> A = matrix(Q, [[Integer(2), Integer(5)-a, Integer(15)-a, Integer(16)+Integer(4)*a], [Integer(2)+a, a, -Integer(7) + Integer(5)*a, -Integer(3)+Integer(3)*a]]) >>> set_verbose(Integer(2)) >>> A.right_kernel(algorithm='default') verbose ... verbose 2 (<module>) computing right kernel matrix over a number field for 2x4 matrix verbose 2 (<module>) done computing right kernel matrix over a number field for 2x4 matrix ... Vector space of degree 4 and dimension 2 over Number Field in a with defining polynomial x^2 + 7 with a = 2.645751311064591?*I Basis matrix: [ 1 0 7/88*a + 3/88 -3/176*a - 39/176] [ 0 1 -1/88*a - 13/88 13/176*a - 7/176] >>> set_verbose(Integer(0))
# needs sage.rings.number_field Q = QuadraticField(-7) a = Q.gen(0) A = matrix(Q, [[2, 5-a, 15-a, 16+4*a], [2+a, a, -7 + 5*a, -3+3*a]]) set_verbose(2) A.right_kernel(algorithm='default') set_verbose(0)
Over the Finite Field of Order 2:
Kernels are computed by the M4RI library using PLUQ matrix decomposition in the
_right_kernel_matrix()method. There are no options for the algorithm used.sage: A = matrix(GF(2),[[0, 1, 1, 0, 0, 0], ....: [1, 0, 0, 0, 1, 1,], ....: [1, 0, 0, 0, 1, 1]]) sage: E = A.right_kernel_matrix(algorithm='default', format='echelon'); E [1 0 0 0 0 1] [0 1 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 1] sage: A*E.transpose() == zero_matrix(GF(2), 3, 4) True
>>> from sage.all import * >>> A = matrix(GF(Integer(2)),[[Integer(0), Integer(1), Integer(1), Integer(0), Integer(0), Integer(0)], ... [Integer(1), Integer(0), Integer(0), Integer(0), Integer(1), Integer(1),], ... [Integer(1), Integer(0), Integer(0), Integer(0), Integer(1), Integer(1)]]) >>> E = A.right_kernel_matrix(algorithm='default', format='echelon'); E [1 0 0 0 0 1] [0 1 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 1] >>> A*E.transpose() == zero_matrix(GF(Integer(2)), Integer(3), Integer(4)) True
A = matrix(GF(2),[[0, 1, 1, 0, 0, 0], [1, 0, 0, 0, 1, 1,], [1, 0, 0, 0, 1, 1]]) E = A.right_kernel_matrix(algorithm='default', format='echelon'); E A*E.transpose() == zero_matrix(GF(2), 3, 4)Since GF(2) is a field we can route this computation to the generic code and obtain the ‘pivot’ form of the basis. The
algorithmkeywords, ‘pluq’, ‘default’ and unspecified, all have the same effect as there is no optional behavior.sage: A = matrix(GF(2), [[0, 1, 1, 0, 0, 0], ....: [1, 0, 0, 0, 1, 1,], ....: [1, 0, 0, 0, 1, 1]]) sage: P = A.right_kernel_matrix(algorithm='generic', basis='pivot'); P [0 1 1 0 0 0] [0 0 0 1 0 0] [1 0 0 0 1 0] [1 0 0 0 0 1] sage: A*P.transpose() == zero_matrix(GF(2), 3, 4) True sage: DP = A.right_kernel_matrix(algorithm='default', basis='pivot'); DP [0 1 1 0 0 0] [0 0 0 1 0 0] [1 0 0 0 1 0] [1 0 0 0 0 1] sage: A*DP.transpose() == zero_matrix(GF(2), 3, 4) True sage: A.right_kernel_matrix(algorithm='pluq', basis='echelon') # needs sage.libs.m4ri [1 0 0 0 0 1] [0 1 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 1]
>>> from sage.all import * >>> A = matrix(GF(Integer(2)), [[Integer(0), Integer(1), Integer(1), Integer(0), Integer(0), Integer(0)], ... [Integer(1), Integer(0), Integer(0), Integer(0), Integer(1), Integer(1),], ... [Integer(1), Integer(0), Integer(0), Integer(0), Integer(1), Integer(1)]]) >>> P = A.right_kernel_matrix(algorithm='generic', basis='pivot'); P [0 1 1 0 0 0] [0 0 0 1 0 0] [1 0 0 0 1 0] [1 0 0 0 0 1] >>> A*P.transpose() == zero_matrix(GF(Integer(2)), Integer(3), Integer(4)) True >>> DP = A.right_kernel_matrix(algorithm='default', basis='pivot'); DP [0 1 1 0 0 0] [0 0 0 1 0 0] [1 0 0 0 1 0] [1 0 0 0 0 1] >>> A*DP.transpose() == zero_matrix(GF(Integer(2)), Integer(3), Integer(4)) True >>> A.right_kernel_matrix(algorithm='pluq', basis='echelon') # needs sage.libs.m4ri [1 0 0 0 0 1] [0 1 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 1]
A = matrix(GF(2), [[0, 1, 1, 0, 0, 0], [1, 0, 0, 0, 1, 1,], [1, 0, 0, 0, 1, 1]]) P = A.right_kernel_matrix(algorithm='generic', basis='pivot'); P A*P.transpose() == zero_matrix(GF(2), 3, 4) DP = A.right_kernel_matrix(algorithm='default', basis='pivot'); DP A*DP.transpose() == zero_matrix(GF(2), 3, 4) A.right_kernel_matrix(algorithm='pluq', basis='echelon') # needs sage.libs.m4riWe test that the mod 2 code is called for matrices over GF(2).
sage: A = matrix(GF(2), [[0, 1, 1, 0, 0, 0], ....: [1, 0, 0, 0, 1, 1,], ....: [1, 0, 0, 0, 1, 1]]) sage: set_verbose(2) # needs sage.rings.finite_rings sage: A.right_kernel(algorithm='default') verbose ... verbose ... (<module>) computing right kernel matrix over integers mod 2 for 3x6 matrix verbose ... (<module>) done computing right kernel matrix over integers mod 2 for 3x6 matrix ... Vector space of degree 6 and dimension 4 over Finite Field of size 2 Basis matrix: [1 0 0 0 0 1] [0 1 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 1] sage: set_verbose(0)
>>> from sage.all import * >>> A = matrix(GF(Integer(2)), [[Integer(0), Integer(1), Integer(1), Integer(0), Integer(0), Integer(0)], ... [Integer(1), Integer(0), Integer(0), Integer(0), Integer(1), Integer(1),], ... [Integer(1), Integer(0), Integer(0), Integer(0), Integer(1), Integer(1)]]) >>> set_verbose(Integer(2)) # needs sage.rings.finite_rings >>> A.right_kernel(algorithm='default') verbose ... verbose ... (<module>) computing right kernel matrix over integers mod 2 for 3x6 matrix verbose ... (<module>) done computing right kernel matrix over integers mod 2 for 3x6 matrix ... Vector space of degree 6 and dimension 4 over Finite Field of size 2 Basis matrix: [1 0 0 0 0 1] [0 1 1 0 0 0] [0 0 0 1 0 0] [0 0 0 0 1 1] >>> set_verbose(Integer(0))
A = matrix(GF(2), [[0, 1, 1, 0, 0, 0], [1, 0, 0, 0, 1, 1,], [1, 0, 0, 0, 1, 1]]) set_verbose(2) # needs sage.rings.finite_rings A.right_kernel(algorithm='default') set_verbose(0)Over Arbitrary Fields:
For kernels over fields not listed above, totally general code will compute a set of basis vectors in the pivot format. These could be returned as a basis in echelon form.
sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(5^2) sage: A = matrix(F, 3, 4, [[ 1, a, 1+a, a^3+a^5], ....: [ a, a^4, a+a^4, a^4+a^8], ....: [a^2, a^6, a^2+a^6, a^5+a^10]]) sage: P = A.right_kernel_matrix(algorithm='default', basis='pivot'); P [ 4 4 1 0] [ a + 2 3*a + 3 0 1] sage: A*P.transpose() == zero_matrix(F, 3, 2) True sage: E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [ 1 0 3*a + 4 2*a + 2] [ 0 1 2*a 3*a + 3] sage: A*E.transpose() == zero_matrix(F, 3, 2) True
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(5)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, Integer(3), Integer(4), [[ Integer(1), a, Integer(1)+a, a**Integer(3)+a**Integer(5)], ... [ a, a**Integer(4), a+a**Integer(4), a**Integer(4)+a**Integer(8)], ... [a**Integer(2), a**Integer(6), a**Integer(2)+a**Integer(6), a**Integer(5)+a**Integer(10)]]) >>> P = A.right_kernel_matrix(algorithm='default', basis='pivot'); P [ 4 4 1 0] [ a + 2 3*a + 3 0 1] >>> A*P.transpose() == zero_matrix(F, Integer(3), Integer(2)) True >>> E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [ 1 0 3*a + 4 2*a + 2] [ 0 1 2*a 3*a + 3] >>> A*E.transpose() == zero_matrix(F, Integer(3), Integer(2)) True
# needs sage.rings.finite_rings F.<a> = FiniteField(5^2) A = matrix(F, 3, 4, [[ 1, a, 1+a, a^3+a^5], [ a, a^4, a+a^4, a^4+a^8], [a^2, a^6, a^2+a^6, a^5+a^10]]) P = A.right_kernel_matrix(algorithm='default', basis='pivot'); P A*P.transpose() == zero_matrix(F, 3, 2) E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E A*E.transpose() == zero_matrix(F, 3, 2)This general code can be requested for matrices over any field with the
algorithmkeyword ‘generic’. Normally, matrices over the rationals would be handled by specific routines from the IML library. The default format is an echelon basis, but a pivot basis may be requested, which is identical to the computed basis.sage: A = matrix(QQ, 3, 4, [[1,3,-2,4], ....: [2,0,2,2], ....: [-1,1,-2,0]]) sage: G = A.right_kernel_matrix(algorithm='generic'); G [ 1 0 -1/2 -1/2] [ 0 1 1/2 -1/2] sage: A*G.transpose() == zero_matrix(QQ, 3, 2) True sage: C = A.right_kernel_matrix(algorithm='generic', basis='computed'); C [-1 1 1 0] [-1 -1 0 1] sage: A*C.transpose() == zero_matrix(QQ, 3, 2) True
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(4), [[Integer(1),Integer(3),-Integer(2),Integer(4)], ... [Integer(2),Integer(0),Integer(2),Integer(2)], ... [-Integer(1),Integer(1),-Integer(2),Integer(0)]]) >>> G = A.right_kernel_matrix(algorithm='generic'); G [ 1 0 -1/2 -1/2] [ 0 1 1/2 -1/2] >>> A*G.transpose() == zero_matrix(QQ, Integer(3), Integer(2)) True >>> C = A.right_kernel_matrix(algorithm='generic', basis='computed'); C [-1 1 1 0] [-1 -1 0 1] >>> A*C.transpose() == zero_matrix(QQ, Integer(3), Integer(2)) True
A = matrix(QQ, 3, 4, [[1,3,-2,4], [2,0,2,2], [-1,1,-2,0]]) G = A.right_kernel_matrix(algorithm='generic'); G A*G.transpose() == zero_matrix(QQ, 3, 2) C = A.right_kernel_matrix(algorithm='generic', basis='computed'); C A*C.transpose() == zero_matrix(QQ, 3, 2)We test that the generic code is called for matrices over fields, lacking any more specific routine.
sage: # needs sage.rings.finite_rings sage: F.<a> = FiniteField(5^2) sage: A = matrix(F, 3, 4, [[ 1, a, 1+a, a^3+a^5], ....: [ a, a^4, a+a^4, a^4+a^8], ....: [a^2, a^6, a^2+a^6, a^5+a^10]]) sage: set_verbose(2) sage: A.right_kernel(algorithm='default') verbose ... verbose 2 (<module>) computing right kernel matrix over an arbitrary field for 3x4 matrix ... Vector space of degree 4 and dimension 2 over Finite Field in a of size 5^2 Basis matrix: [ 1 0 3*a + 4 2*a + 2] [ 0 1 2*a 3*a + 3] sage: set_verbose(0)
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = FiniteField(Integer(5)**Integer(2), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, Integer(3), Integer(4), [[ Integer(1), a, Integer(1)+a, a**Integer(3)+a**Integer(5)], ... [ a, a**Integer(4), a+a**Integer(4), a**Integer(4)+a**Integer(8)], ... [a**Integer(2), a**Integer(6), a**Integer(2)+a**Integer(6), a**Integer(5)+a**Integer(10)]]) >>> set_verbose(Integer(2)) >>> A.right_kernel(algorithm='default') verbose ... verbose 2 (<module>) computing right kernel matrix over an arbitrary field for 3x4 matrix ... Vector space of degree 4 and dimension 2 over Finite Field in a of size 5^2 Basis matrix: [ 1 0 3*a + 4 2*a + 2] [ 0 1 2*a 3*a + 3] >>> set_verbose(Integer(0))
# needs sage.rings.finite_rings F.<a> = FiniteField(5^2) A = matrix(F, 3, 4, [[ 1, a, 1+a, a^3+a^5], [ a, a^4, a+a^4, a^4+a^8], [a^2, a^6, a^2+a^6, a^5+a^10]]) set_verbose(2) A.right_kernel(algorithm='default') set_verbose(0)Over the Integers:
Either the IML or PARI libraries are used to provide a set of basis vectors. The
algorithmkeyword can be used to select either, or when set to ‘default’ a heuristic will choose between the two. Results can be returned in the ‘compute’ format, straight out of the libraries. Unique to the integers, the basis vectors can be returned as an LLL basis. Note the similarities and differences in the results. The ‘pivot’ format is not available, since the integers are not a field.sage: A = matrix(ZZ, [[8, 0, 7, 1, 3, 4, 6], ....: [4, 0, 3, 4, 2, 7, 7], ....: [1, 4, 6, 1, 2, 8, 5], ....: [0, 3, 1, 2, 3, 6, 2]]) sage: X = A.right_kernel_matrix(algorithm='default', basis='echelon'); X [ 1 12 3 14 -3 -10 1] [ 0 35 0 25 -1 -31 17] [ 0 0 7 12 -3 -1 -8] sage: A*X.transpose() == zero_matrix(ZZ, 4, 3) True sage: X = A.right_kernel_matrix(algorithm='padic', basis='LLL'); X [ -3 -1 5 7 2 -3 -2] [ 3 1 2 5 -5 2 -6] [ -4 -13 2 -7 5 7 -3] sage: A*X.transpose() == zero_matrix(ZZ, 4, 3) True sage: # needs sage.libs.pari sage: X = A.right_kernel_matrix(algorithm='pari', basis='computed'); X [ 3 1 -5 -7 -2 3 2] [ 3 1 2 5 -5 2 -6] [ 4 13 -2 7 -5 -7 3] sage: A*X.transpose() == zero_matrix(ZZ, 4, 3) True sage: X = A.right_kernel_matrix(algorithm='padic', basis='computed'); X [ 265 345 -178 17 -297 0 0] [-242 -314 163 -14 271 -1 0] [ -36 -47 25 -1 40 0 -1] sage: A*X.transpose() == zero_matrix(ZZ, 4, 3) True
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(8), Integer(0), Integer(7), Integer(1), Integer(3), Integer(4), Integer(6)], ... [Integer(4), Integer(0), Integer(3), Integer(4), Integer(2), Integer(7), Integer(7)], ... [Integer(1), Integer(4), Integer(6), Integer(1), Integer(2), Integer(8), Integer(5)], ... [Integer(0), Integer(3), Integer(1), Integer(2), Integer(3), Integer(6), Integer(2)]]) >>> X = A.right_kernel_matrix(algorithm='default', basis='echelon'); X [ 1 12 3 14 -3 -10 1] [ 0 35 0 25 -1 -31 17] [ 0 0 7 12 -3 -1 -8] >>> A*X.transpose() == zero_matrix(ZZ, Integer(4), Integer(3)) True >>> X = A.right_kernel_matrix(algorithm='padic', basis='LLL'); X [ -3 -1 5 7 2 -3 -2] [ 3 1 2 5 -5 2 -6] [ -4 -13 2 -7 5 7 -3] >>> A*X.transpose() == zero_matrix(ZZ, Integer(4), Integer(3)) True >>> # needs sage.libs.pari >>> X = A.right_kernel_matrix(algorithm='pari', basis='computed'); X [ 3 1 -5 -7 -2 3 2] [ 3 1 2 5 -5 2 -6] [ 4 13 -2 7 -5 -7 3] >>> A*X.transpose() == zero_matrix(ZZ, Integer(4), Integer(3)) True >>> X = A.right_kernel_matrix(algorithm='padic', basis='computed'); X [ 265 345 -178 17 -297 0 0] [-242 -314 163 -14 271 -1 0] [ -36 -47 25 -1 40 0 -1] >>> A*X.transpose() == zero_matrix(ZZ, Integer(4), Integer(3)) True
A = matrix(ZZ, [[8, 0, 7, 1, 3, 4, 6], [4, 0, 3, 4, 2, 7, 7], [1, 4, 6, 1, 2, 8, 5], [0, 3, 1, 2, 3, 6, 2]]) X = A.right_kernel_matrix(algorithm='default', basis='echelon'); X A*X.transpose() == zero_matrix(ZZ, 4, 3) X = A.right_kernel_matrix(algorithm='padic', basis='LLL'); X A*X.transpose() == zero_matrix(ZZ, 4, 3) # needs sage.libs.pari X = A.right_kernel_matrix(algorithm='pari', basis='computed'); X A*X.transpose() == zero_matrix(ZZ, 4, 3) X = A.right_kernel_matrix(algorithm='padic', basis='computed'); X A*X.transpose() == zero_matrix(ZZ, 4, 3)We test that the code for integer matrices is called for matrices defined over the integers, both dense and sparse, with equal result.
sage: A = matrix(ZZ, [[8, 0, 7, 1, 3, 4, 6], ....: [4, 0, 3, 4, 2, 7, 7], ....: [1, 4, 6, 1, 2, 8, 5], ....: [0, 3, 1, 2, 3, 6, 2]], ....: sparse=False) sage: B = copy(A).sparse_matrix() sage: set_verbose(2) sage: D = A.right_kernel(); D verbose ... (<module>) computing a right kernel for 4x7 matrix over Integer Ring verbose ... (<module>) computing right kernel matrix over the integers for 4x7 matrix ... verbose ... (<module>) done computing right kernel matrix over the integers for 4x7 matrix ... Free module of degree 7 and rank 3 over Integer Ring Echelon basis matrix: [ 1 12 3 14 -3 -10 1] [ 0 35 0 25 -1 -31 17] [ 0 0 7 12 -3 -1 -8] sage: S = B.right_kernel(); S verbose ... (<module>) computing a right kernel for 4x7 matrix over Integer Ring verbose ... (<module>) computing right kernel matrix over the integers for 4x7 matrix ... verbose ... (<module>) done computing right kernel matrix over the integers for 4x7 matrix ... Free module of degree 7 and rank 3 over Integer Ring Echelon basis matrix: [ 1 12 3 14 -3 -10 1] [ 0 35 0 25 -1 -31 17] [ 0 0 7 12 -3 -1 -8] sage: set_verbose(0) sage: D == S True
>>> from sage.all import * >>> A = matrix(ZZ, [[Integer(8), Integer(0), Integer(7), Integer(1), Integer(3), Integer(4), Integer(6)], ... [Integer(4), Integer(0), Integer(3), Integer(4), Integer(2), Integer(7), Integer(7)], ... [Integer(1), Integer(4), Integer(6), Integer(1), Integer(2), Integer(8), Integer(5)], ... [Integer(0), Integer(3), Integer(1), Integer(2), Integer(3), Integer(6), Integer(2)]], ... sparse=False) >>> B = copy(A).sparse_matrix() >>> set_verbose(Integer(2)) >>> D = A.right_kernel(); D verbose ... (<module>) computing a right kernel for 4x7 matrix over Integer Ring verbose ... (<module>) computing right kernel matrix over the integers for 4x7 matrix ... verbose ... (<module>) done computing right kernel matrix over the integers for 4x7 matrix ... Free module of degree 7 and rank 3 over Integer Ring Echelon basis matrix: [ 1 12 3 14 -3 -10 1] [ 0 35 0 25 -1 -31 17] [ 0 0 7 12 -3 -1 -8] >>> S = B.right_kernel(); S verbose ... (<module>) computing a right kernel for 4x7 matrix over Integer Ring verbose ... (<module>) computing right kernel matrix over the integers for 4x7 matrix ... verbose ... (<module>) done computing right kernel matrix over the integers for 4x7 matrix ... Free module of degree 7 and rank 3 over Integer Ring Echelon basis matrix: [ 1 12 3 14 -3 -10 1] [ 0 35 0 25 -1 -31 17] [ 0 0 7 12 -3 -1 -8] >>> set_verbose(Integer(0)) >>> D == S True
A = matrix(ZZ, [[8, 0, 7, 1, 3, 4, 6], [4, 0, 3, 4, 2, 7, 7], [1, 4, 6, 1, 2, 8, 5], [0, 3, 1, 2, 3, 6, 2]], sparse=False) B = copy(A).sparse_matrix() set_verbose(2) D = A.right_kernel(); D S = B.right_kernel(); S set_verbose(0) D == SOver Principal Ideal Domains:
Kernels can be computed using Smith normal form. Only the default algorithm is available, and the ‘pivot’ basis format is not available.
sage: R.<y> = QQ[] sage: A = matrix(R, [[ 1, y, 1+y^2], ....: [y^3, y^2, 2*y^3]]) sage: E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [-1 -y 1] sage: A*E.transpose() == zero_matrix(ZZ, 2, 1) True
>>> from sage.all import * >>> R = QQ['y']; (y,) = R._first_ngens(1) >>> A = matrix(R, [[ Integer(1), y, Integer(1)+y**Integer(2)], ... [y**Integer(3), y**Integer(2), Integer(2)*y**Integer(3)]]) >>> E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E [-1 -y 1] >>> A*E.transpose() == zero_matrix(ZZ, Integer(2), Integer(1)) True
R.<y> = QQ[] A = matrix(R, [[ 1, y, 1+y^2], [y^3, y^2, 2*y^3]]) E = A.right_kernel_matrix(algorithm='default', basis='echelon'); E A*E.transpose() == zero_matrix(ZZ, 2, 1)It can be computationally expensive to determine if an integral domain is a principal ideal domain. The Smith normal form routine can fail for non-PIDs, as in this example.
sage: D.<x> = ZZ[] sage: A = matrix(D, 2, 2, [[x^2 - x, -x + 5], ....: [x^2 - 8, -x + 2]]) sage: A.right_kernel_matrix() Traceback (most recent call last): ... ArithmeticError: Ideal Ideal (x^2 - x, x^2 - 8) of Univariate Polynomial Ring in x over Integer Ring not principal
>>> from sage.all import * >>> D = ZZ['x']; (x,) = D._first_ngens(1) >>> A = matrix(D, Integer(2), Integer(2), [[x**Integer(2) - x, -x + Integer(5)], ... [x**Integer(2) - Integer(8), -x + Integer(2)]]) >>> A.right_kernel_matrix() Traceback (most recent call last): ... ArithmeticError: Ideal Ideal (x^2 - x, x^2 - 8) of Univariate Polynomial Ring in x over Integer Ring not principal
D.<x> = ZZ[] A = matrix(D, 2, 2, [[x^2 - x, -x + 5], [x^2 - 8, -x + 2]]) A.right_kernel_matrix()We test that the domain code is called for domains that lack any extra structure.
sage: R.<y> = QQ[] sage: A = matrix(R, [[ 1, y, 1+y^2], ....: [y^3, y^2, 2*y^3]]) sage: set_verbose(2) sage: A.right_kernel(algorithm='default', basis='echelon') verbose ... verbose 2 (<module>) computing right kernel matrix over a domain for 2x3 matrix verbose 2 (<module>) done computing right kernel matrix over a domain for 2x3 matrix ... Free module of degree 3 and rank 1 over Univariate Polynomial Ring in y over Rational Field Echelon basis matrix: [-1 -y 1] sage: set_verbose(0)
>>> from sage.all import * >>> R = QQ['y']; (y,) = R._first_ngens(1) >>> A = matrix(R, [[ Integer(1), y, Integer(1)+y**Integer(2)], ... [y**Integer(3), y**Integer(2), Integer(2)*y**Integer(3)]]) >>> set_verbose(Integer(2)) >>> A.right_kernel(algorithm='default', basis='echelon') verbose ... verbose 2 (<module>) computing right kernel matrix over a domain for 2x3 matrix verbose 2 (<module>) done computing right kernel matrix over a domain for 2x3 matrix ... Free module of degree 3 and rank 1 over Univariate Polynomial Ring in y over Rational Field Echelon basis matrix: [-1 -y 1] >>> set_verbose(Integer(0))
R.<y> = QQ[] A = matrix(R, [[ 1, y, 1+y^2], [y^3, y^2, 2*y^3]]) set_verbose(2) A.right_kernel(algorithm='default', basis='echelon') set_verbose(0)Over inexact rings:
For inexact rings one should avoid echelonizing if possible:
sage: A = Matrix( ....: [[ 0.0, 0.5, 0.8090169944], ....: [ 0.0, 0.5, -0.8090169944], ....: [ 0.0, -0.5, 0.8090169944], ....: [ 0.0, -0.5, -0.8090169944], ....: [ 0.5, 0.8090169944, 0.0], ....: [ 0.5, -0.8090169944, 0.0], ....: [ -0.5, 0.8090169944, 0.0], ....: [ -0.5, -0.8090169944, 0.0], ....: [ 0.8090169944, 0.0, 0.5], ....: [-0.8090169944, 0.0, 0.5], ....: [ 0.8090169944, 0.0, -0.5], ....: [-0.8090169944, 0.0, -0.5]]).transpose() sage: (A * A.right_kernel_matrix().transpose()).norm() > 2 True sage: (A * A.right_kernel_matrix(basis='computed').transpose()).norm() < 1e-15 True
>>> from sage.all import * >>> A = Matrix( ... [[ RealNumber('0.0'), RealNumber('0.5'), RealNumber('0.8090169944')], ... [ RealNumber('0.0'), RealNumber('0.5'), -RealNumber('0.8090169944')], ... [ RealNumber('0.0'), -RealNumber('0.5'), RealNumber('0.8090169944')], ... [ RealNumber('0.0'), -RealNumber('0.5'), -RealNumber('0.8090169944')], ... [ RealNumber('0.5'), RealNumber('0.8090169944'), RealNumber('0.0')], ... [ RealNumber('0.5'), -RealNumber('0.8090169944'), RealNumber('0.0')], ... [ -RealNumber('0.5'), RealNumber('0.8090169944'), RealNumber('0.0')], ... [ -RealNumber('0.5'), -RealNumber('0.8090169944'), RealNumber('0.0')], ... [ RealNumber('0.8090169944'), RealNumber('0.0'), RealNumber('0.5')], ... [-RealNumber('0.8090169944'), RealNumber('0.0'), RealNumber('0.5')], ... [ RealNumber('0.8090169944'), RealNumber('0.0'), -RealNumber('0.5')], ... [-RealNumber('0.8090169944'), RealNumber('0.0'), -RealNumber('0.5')]]).transpose() >>> (A * A.right_kernel_matrix().transpose()).norm() > Integer(2) True >>> (A * A.right_kernel_matrix(basis='computed').transpose()).norm() < RealNumber('1e-15') True
A = Matrix( [[ 0.0, 0.5, 0.8090169944], [ 0.0, 0.5, -0.8090169944], [ 0.0, -0.5, 0.8090169944], [ 0.0, -0.5, -0.8090169944], [ 0.5, 0.8090169944, 0.0], [ 0.5, -0.8090169944, 0.0], [ -0.5, 0.8090169944, 0.0], [ -0.5, -0.8090169944, 0.0], [ 0.8090169944, 0.0, 0.5], [-0.8090169944, 0.0, 0.5], [ 0.8090169944, 0.0, -0.5], [-0.8090169944, 0.0, -0.5]]).transpose() (A * A.right_kernel_matrix().transpose()).norm() > 2 (A * A.right_kernel_matrix(basis='computed').transpose()).norm() < 1e-15
Trivial Cases:
We test two trivial cases. Any possible values for the keywords (
algorithm,basis) will return identical results.sage: A = matrix(ZZ, 0, 2) sage: A.right_kernel_matrix() [1 0] [0 1] sage: A = matrix(FiniteField(7), 2, 0) sage: A.right_kernel_matrix().parent() Full MatrixSpace of 0 by 0 dense matrices over Finite Field of size 7
>>> from sage.all import * >>> A = matrix(ZZ, Integer(0), Integer(2)) >>> A.right_kernel_matrix() [1 0] [0 1] >>> A = matrix(FiniteField(Integer(7)), Integer(2), Integer(0)) >>> A.right_kernel_matrix().parent() Full MatrixSpace of 0 by 0 dense matrices over Finite Field of size 7
A = matrix(ZZ, 0, 2) A.right_kernel_matrix() A = matrix(FiniteField(7), 2, 0) A.right_kernel_matrix().parent()
- right_nullity()[source]¶
Return the right nullity of this matrix, which is the dimension of the right kernel.
EXAMPLES:
sage: A = MatrixSpace(QQ,3,2)(range(6)) sage: A.right_nullity() 0
>>> from sage.all import * >>> A = MatrixSpace(QQ,Integer(3),Integer(2))(range(Integer(6))) >>> A.right_nullity() 0
A = MatrixSpace(QQ,3,2)(range(6)) A.right_nullity()
sage: A = matrix(ZZ,3,3,range(9)) sage: A.right_nullity() 1
>>> from sage.all import * >>> A = matrix(ZZ,Integer(3),Integer(3),range(Integer(9))) >>> A.right_nullity() 1
A = matrix(ZZ,3,3,range(9)) A.right_nullity()
>>> from sage.all import * >>> A = matrix(ZZ,Integer(3),Integer(3),range(Integer(9))) >>> A.right_nullity() 1
A = matrix(ZZ,3,3,range(9)) A.right_nullity()
- rook_vector(algorithm=None, complement=False, use_complement=None)[source]¶
Return the rook vector of this matrix.
Let \(A\) be an \(m\) by \(n\) (0,1)-matrix. We identify \(A\) with a chessboard where rooks can be placed on the fields \((i, j)\) with \(A_{i,j} = 1\). The number \(r_k = p_k(A)\) (the permanental \(k\)-minor) counts the number of ways to place \(k\) rooks on this board so that no rook can attack another.
The rook vector of the matrix \(A\) is the list consisting of \(r_0, r_1, \ldots, r_h\), where \(h = min(m,n)\). The rook polynomial is defined by \(r(x) = \sum_{k=0}^h r_k x^k\).
The rook vector can be generalized to matrices defined over any rings using permanental minors. Among the available algorithms, only “Godsil” needs the condition on the entries to be either \(0\) or \(1\).
See Wikipedia article Rook_polynomial for more information and also the method
permanental_minor()to compute individual permanental minor.See also
sage.matrix.matrix2.permanental_minor_polynomialand the graph methodmatching_polynomial.INPUT:
self– an \(m\) by \(n\) matrixalgorithm– string which must be either'Ryser'or'ButeraPernici'(default) or'Godsil'; Ryser one might be faster on simple and small instances. Godsil only accepts input in 0,1.complement– boolean (default:False); whether we consider the rook vector of the complement matrix. If set toTruethen the matrix must have entries in {0, 1} and the complement matrix is the one for which the 0s are replaced by 1s and 1s by 0s.use_complement– boolean (default:None); whether to compute the rook vector of a (0,1)-matrix from its complement. By default this is determined by the density of ones in the matrix.
EXAMPLES:
The standard chessboard is an \(8\) by \(8\) grid in which any positions is allowed. In that case one gets that the number of ways to position \(4\) non-attacking rooks is \(117600\) while for \(8\) rooks it is \(40320\):
sage: ones_matrix(8,8).rook_vector() [1, 64, 1568, 18816, 117600, 376320, 564480, 322560, 40320]
>>> from sage.all import * >>> ones_matrix(Integer(8),Integer(8)).rook_vector() [1, 64, 1568, 18816, 117600, 376320, 564480, 322560, 40320]
ones_matrix(8,8).rook_vector()
These numbers are the coefficients of a modified Laguerre polynomial:
sage: x = polygen(QQ) sage: factorial(8) * laguerre(8,-x) # needs sage.symbolic x^8 + 64*x^7 + 1568*x^6 + 18816*x^5 + 117600*x^4 + 376320*x^3 + 564480*x^2 + 322560*x + 40320
>>> from sage.all import * >>> x = polygen(QQ) >>> factorial(Integer(8)) * laguerre(Integer(8),-x) # needs sage.symbolic x^8 + 64*x^7 + 1568*x^6 + 18816*x^5 + 117600*x^4 + 376320*x^3 + 564480*x^2 + 322560*x + 40320
x = polygen(QQ) factorial(8) * laguerre(8,-x) # needs sage.symbolic
The number of derangements of length \(n\) is the permanent of a matrix with 0 on the diagonal and 1 elsewhere; for \(n=21\) it is \(18795307255050944540\) (see OEIS sequence A000166):
sage: A = identity_matrix(21) sage: A.rook_vector(complement=True)[-1] 18795307255050944540 sage: Derangements(21).cardinality() # needs sage.combinat 18795307255050944540
An other example that we convert into a rook polynomial:
sage: A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) sage: A [1 1 1 1 0 0] [0 1 1 1 1 0] [0 0 1 1 1 1] sage: A.rook_vector() [1, 12, 40, 36] sage: R = PolynomialRing(ZZ, 'x') sage: R(A.rook_vector()) 36*x^3 + 40*x^2 + 12*x + 1
>>> from sage.all import * >>> A = matrix(Integer(3),Integer(6), [Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1),Integer(0),Integer(0),Integer(0),Integer(1),Integer(1),Integer(1),Integer(1)]) >>> A [1 1 1 1 0 0] [0 1 1 1 1 0] [0 0 1 1 1 1] >>> A.rook_vector() [1, 12, 40, 36] >>> R = PolynomialRing(ZZ, 'x') >>> R(A.rook_vector()) 36*x^3 + 40*x^2 + 12*x + 1
A = matrix(3,6, [1,1,1,1,0,0,0,1,1,1,1,0,0,0,1,1,1,1]) A A.rook_vector() R = PolynomialRing(ZZ, 'x') R(A.rook_vector())
Different algorithms are available:
sage: A = matrix([[1,0,0,1],[0,1,1,0],[0,1,1,0],[1,0,0,1]]) sage: A.rook_vector(algorithm='ButeraPernici') [1, 8, 20, 16, 4] sage: A.rook_vector(algorithm='Ryser') [1, 8, 20, 16, 4] sage: A.rook_vector(algorithm='Godsil') # needs sage.graphs sage.libs.flint [1, 8, 20, 16, 4]
>>> from sage.all import * >>> A = matrix([[Integer(1),Integer(0),Integer(0),Integer(1)],[Integer(0),Integer(1),Integer(1),Integer(0)],[Integer(0),Integer(1),Integer(1),Integer(0)],[Integer(1),Integer(0),Integer(0),Integer(1)]]) >>> A.rook_vector(algorithm='ButeraPernici') [1, 8, 20, 16, 4] >>> A.rook_vector(algorithm='Ryser') [1, 8, 20, 16, 4] >>> A.rook_vector(algorithm='Godsil') # needs sage.graphs sage.libs.flint [1, 8, 20, 16, 4]
A = matrix([[1,0,0,1],[0,1,1,0],[0,1,1,0],[1,0,0,1]]) A.rook_vector(algorithm='ButeraPernici') A.rook_vector(algorithm='Ryser') A.rook_vector(algorithm='Godsil') # needs sage.graphs sage.libs.flint
When the matrix \(A\) has more ones then zeroes it is usually faster to compute the rook polynomial of the complementary matrix, with zeroes and ones interchanged, and use the inclusion-exclusion theorem, giving for a \(m \times n\) matrix \(A\) with complementary matrix \(B\)
\[r_k(A) = \sum_{j=0}^k (-1)^j \binom{m-j}{k-j} \binom{n-j}{k-j} (k-j)! r_j(B)\]see [Rio1958] or the introductory text [AS2011]. This can be done setting the argument
use_complementtoTrue.An example with an exotic matrix (for which only Butera-Pernici and Ryser algorithms are available):
sage: R.<x,y> = PolynomialRing(GF(5)) sage: A = matrix(R, [[1, x, y], [x*y, x**2+y, 0]]) sage: A.rook_vector(algorithm='ButeraPernici') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y] sage: A.rook_vector(algorithm='Ryser') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y] sage: A.rook_vector(algorithm='Godsil') Traceback (most recent call last): ... ValueError: coefficients must be zero or one, but we have 'x' in position (0,1). sage: B = A.transpose() sage: B.rook_vector(algorithm='ButeraPernici') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y] sage: B.rook_vector(algorithm='Ryser') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y]
>>> from sage.all import * >>> R = PolynomialRing(GF(Integer(5)), names=('x', 'y',)); (x, y,) = R._first_ngens(2) >>> A = matrix(R, [[Integer(1), x, y], [x*y, x**Integer(2)+y, Integer(0)]]) >>> A.rook_vector(algorithm='ButeraPernici') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y] >>> A.rook_vector(algorithm='Ryser') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y] >>> A.rook_vector(algorithm='Godsil') Traceback (most recent call last): ... ValueError: coefficients must be zero or one, but we have 'x' in position (0,1). >>> B = A.transpose() >>> B.rook_vector(algorithm='ButeraPernici') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y] >>> B.rook_vector(algorithm='Ryser') [1, x^2 + x*y + x + 2*y + 1, 2*x^2*y + x*y^2 + x^2 + y^2 + y]
R.<x,y> = PolynomialRing(GF(5)) A = matrix(R, [[1, x, y], [x*y, x**2+y, 0]]) A.rook_vector(algorithm='ButeraPernici') A.rook_vector(algorithm='Ryser') A.rook_vector(algorithm='Godsil') B = A.transpose() B.rook_vector(algorithm='ButeraPernici') B.rook_vector(algorithm='Ryser')
- row_module(base_ring=None)[source]¶
Return the free module over the base ring spanned by the rows of
self.EXAMPLES:
sage: A = MatrixSpace(IntegerRing(), 2)([1,2,3,4]) sage: A.row_module() Free module of degree 2 and rank 2 over Integer Ring Echelon basis matrix: [1 0] [0 2]
>>> from sage.all import * >>> A = MatrixSpace(IntegerRing(), Integer(2))([Integer(1),Integer(2),Integer(3),Integer(4)]) >>> A.row_module() Free module of degree 2 and rank 2 over Integer Ring Echelon basis matrix: [1 0] [0 2]
A = MatrixSpace(IntegerRing(), 2)([1,2,3,4]) A.row_module()
- row_space(base_ring=None)[source]¶
Return the row space of this matrix. (Synonym for self.row_module().)
EXAMPLES:
sage: t = matrix(QQ, 3, 3, range(9)); t [0 1 2] [3 4 5] [6 7 8] sage: t.row_space() Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1] [ 0 1 2]
>>> from sage.all import * >>> t = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); t [0 1 2] [3 4 5] [6 7 8] >>> t.row_space() Vector space of degree 3 and dimension 2 over Rational Field Basis matrix: [ 1 0 -1] [ 0 1 2]
t = matrix(QQ, 3, 3, range(9)); t t.row_space()
sage: m = Matrix(Integers(5),2,2,[2,2,2,2]) sage: m.row_space() Vector space of degree 2 and dimension 1 over Ring of integers modulo 5 Basis matrix: [1 1]
>>> from sage.all import * >>> m = Matrix(Integers(Integer(5)),Integer(2),Integer(2),[Integer(2),Integer(2),Integer(2),Integer(2)]) >>> m.row_space() Vector space of degree 2 and dimension 1 over Ring of integers modulo 5 Basis matrix: [1 1]
m = Matrix(Integers(5),2,2,[2,2,2,2]) m.row_space()
>>> from sage.all import * >>> m = Matrix(Integers(Integer(5)),Integer(2),Integer(2),[Integer(2),Integer(2),Integer(2),Integer(2)]) >>> m.row_space() Vector space of degree 2 and dimension 1 over Ring of integers modulo 5 Basis matrix: [1 1]
m = Matrix(Integers(5),2,2,[2,2,2,2]) m.row_space()
- rref(*args, **kwds)[source]¶
Return the reduced row echelon form of the matrix, considered as a matrix over a field.
If the matrix is over a ring, then an equivalent matrix is constructed over the fraction field, and then row reduced.
All arguments are passed on to
echelon_form().Note
Because the matrix is viewed as a matrix over a field, every leading coefficient of the returned matrix will be one and will be the only nonzero entry in its column.
EXAMPLES:
sage: A = matrix(3,range(9)); A [0 1 2] [3 4 5] [6 7 8] sage: A.rref() [ 1 0 -1] [ 0 1 2] [ 0 0 0]
>>> from sage.all import * >>> A = matrix(Integer(3),range(Integer(9))); A [0 1 2] [3 4 5] [6 7 8] >>> A.rref() [ 1 0 -1] [ 0 1 2] [ 0 0 0]
A = matrix(3,range(9)); A A.rref()
Note that there is a difference between
rref()andechelon_form()when the matrix is not over a field (in this case, the integers instead of the rational numbers):sage: A.base_ring() Integer Ring sage: A.echelon_form() [ 3 0 -3] [ 0 1 2] [ 0 0 0] sage: B = random_matrix(QQ, 3, num_bound=10) sage: while B.rank() != 3: ....: B = random_matrix(QQ, 3, num_bound=10) sage: B.rref() [1 0 0] [0 1 0] [0 0 1]
>>> from sage.all import * >>> A.base_ring() Integer Ring >>> A.echelon_form() [ 3 0 -3] [ 0 1 2] [ 0 0 0] >>> B = random_matrix(QQ, Integer(3), num_bound=Integer(10)) >>> while B.rank() != Integer(3): ... B = random_matrix(QQ, Integer(3), num_bound=Integer(10)) >>> B.rref() [1 0 0] [0 1 0] [0 0 1]
A.base_ring() A.echelon_form() B = random_matrix(QQ, 3, num_bound=10) while B.rank() != 3: B = random_matrix(QQ, 3, num_bound=10) B.rref()In this case, since
Bis a matrix over a field (the rational numbers),rref()andechelon_form()are exactly the same:sage: B.echelon_form() [1 0 0] [0 1 0] [0 0 1] sage: B.echelon_form() is B.rref() True
>>> from sage.all import * >>> B.echelon_form() [1 0 0] [0 1 0] [0 0 1] >>> B.echelon_form() is B.rref() True
B.echelon_form() B.echelon_form() is B.rref()
Since
echelon_form()is not implemented for every ring, sometimes behavior varies, as here:sage: R.<x> = ZZ[] sage: C = matrix(3, [2,x,x^2, x+1,3-x,-1, 3,2,1]) sage: C.rref() [1 0 0] [0 1 0] [0 0 1] sage: C.base_ring() Univariate Polynomial Ring in x over Integer Ring sage: C.echelon_form() Traceback (most recent call last): ... NotImplementedError: Ideal Ideal (2, x + 1) of Univariate Polynomial Ring in x over Integer Ring not principal Echelon form not implemented over 'Univariate Polynomial Ring in x over Integer Ring'. sage: C = matrix(3,[2,x,x^2,x+1,3-x,-1,3,2,1/2]) sage: C.echelon_form() [ 2 x x^2] [ 0 1 15*x^2 - 3/2*x - 31/2] [ 0 0 5/2*x^3 - 15/4*x^2 - 9/4*x + 7/2] sage: C.rref() [1 0 0] [0 1 0] [0 0 1] sage: C = matrix(3, [2,x,x^2, x+1,3-x,-1/x, 3,2,1/2]) sage: C.echelon_form() [1 0 0] [0 1 0] [0 0 1]
>>> from sage.all import * >>> R = ZZ['x']; (x,) = R._first_ngens(1) >>> C = matrix(Integer(3), [Integer(2),x,x**Integer(2), x+Integer(1),Integer(3)-x,-Integer(1), Integer(3),Integer(2),Integer(1)]) >>> C.rref() [1 0 0] [0 1 0] [0 0 1] >>> C.base_ring() Univariate Polynomial Ring in x over Integer Ring >>> C.echelon_form() Traceback (most recent call last): ... NotImplementedError: Ideal Ideal (2, x + 1) of Univariate Polynomial Ring in x over Integer Ring not principal Echelon form not implemented over 'Univariate Polynomial Ring in x over Integer Ring'. >>> C = matrix(Integer(3),[Integer(2),x,x**Integer(2),x+Integer(1),Integer(3)-x,-Integer(1),Integer(3),Integer(2),Integer(1)/Integer(2)]) >>> C.echelon_form() [ 2 x x^2] [ 0 1 15*x^2 - 3/2*x - 31/2] [ 0 0 5/2*x^3 - 15/4*x^2 - 9/4*x + 7/2] >>> C.rref() [1 0 0] [0 1 0] [0 0 1] >>> C = matrix(Integer(3), [Integer(2),x,x**Integer(2), x+Integer(1),Integer(3)-x,-Integer(1)/x, Integer(3),Integer(2),Integer(1)/Integer(2)]) >>> C.echelon_form() [1 0 0] [0 1 0] [0 0 1]
R.<x> = ZZ[] C = matrix(3, [2,x,x^2, x+1,3-x,-1, 3,2,1]) C.rref() C.base_ring() C.echelon_form() C = matrix(3,[2,x,x^2,x+1,3-x,-1,3,2,1/2]) C.echelon_form() C.rref() C = matrix(3, [2,x,x^2, x+1,3-x,-1/x, 3,2,1/2]) C.echelon_form()
- set_block(row, col, block)[source]¶
Set the sub-matrix of self, with upper left corner given by row, col to block.
EXAMPLES:
sage: A = matrix(QQ, 3, 3, range(9))/2 sage: B = matrix(ZZ, 2, 1, [100,200]) sage: A.set_block(0, 1, B) sage: A [ 0 100 1] [3/2 200 5/2] [ 3 7/2 4]
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), Integer(3), range(Integer(9)))/Integer(2) >>> B = matrix(ZZ, Integer(2), Integer(1), [Integer(100),Integer(200)]) >>> A.set_block(Integer(0), Integer(1), B) >>> A [ 0 100 1] [3/2 200 5/2] [ 3 7/2 4]
A = matrix(QQ, 3, 3, range(9))/2 B = matrix(ZZ, 2, 1, [100,200]) A.set_block(0, 1, B) A
We test that an exception is raised when the block is out of bounds:
sage: matrix([1]).set_block(0,1,matrix([1])) Traceback (most recent call last): ... IndexError: matrix window index out of range
>>> from sage.all import * >>> matrix([Integer(1)]).set_block(Integer(0),Integer(1),matrix([Integer(1)])) Traceback (most recent call last): ... IndexError: matrix window index out of range
matrix([1]).set_block(0,1,matrix([1]))
- smith_form(transformation=True, integral=None, exact=True)[source]¶
Return a Smith normal form of this matrix.
For a matrix \(M\), a Smith normal form is a matrix \(S = UMV\) such that:
\(U\) and \(V\) are invertible matrices
the only non-vanishing entries of \(S\) are located on the diagonal (though \(S\) might not be a square matrix)
if \(d_i\) denotes the entry of \(S\) at \((i,i)\), then \(d_i\) divides \(d_{i+1}\) for all \(i\), i.e., the \(d_i\) are the ordered
elementary_divisors()of \(M\)
Note that the matrices \(U\) and \(V\) are not uniquely determined and the \(d_i\) are only uniquely determined up to units. For some base rings, such as local rings, the \(d_i\) might be further normalized, see
LOCAL RINGSbelow.If the base ring is not a PID, the routine might work, or else it will fail having found an example of a non-principal ideal. Note that we do not call any methods to check whether or not the base ring is a PID, since this might be quite expensive (e.g. for rings of integers of number fields of large degree).
INPUT:
transformation– boolean (default:True); whether the matrices \(U\) and \(V\) should be returnedintegral– a subring of the base ring, boolean orNone(default:None); the entries of \(U\) and \(V\) are taken from this subring. IfTrue, the ring is taken to be the ring of integers of the base ring; ifFalsethe fraction field of the base ring; ifNonethe base ring itself. When a subring is specified, multiplying by the denominator must map the entries into the subring; in this case the transformation matrices will have entries in this subring.exact– boolean (default:True); only used for local rings/fields. SeeLOCAL RINGSfor more details.
OUTPUT:
The matrices \(S, U, V\) or the matrix \(S\) depending on
transformation.ALGORITHM:
If the base ring has a method
_matrix_smith_form, use it; note that_matrix_smith_formmight choose to further normalize the output.Otherwise, use the algorithm from Wikipedia article Smith_normal_form.
LOCAL RINGS:
Over local rings, we normalize \(S\) to only contain powers of the uniformizer.
In order to simplify the precision handling, we truncate the absolute precision of the input matrix to the minimum absolute precision of any of its entries. As long as all of the elementary divisors are nonzero modulo this precision, they can be determined exactly since they are defined to be powers of the uniformizer. In this case, which is specified by the keyword
exact=True, one of the transformation matrices will be inexact: \(U\) in the case that the number of rows is at least the number of columns, and \(V\) otherwise.If
exact=False, we instead return an inexact Smith form. Now the transformation matrices are exact and we can deal gracefully with elementary divisors that are zero modulo the working precision. However, the off-diagonal entries of the smith form carry a precision that can affect the precision of future calculations.See
_matrix_smith_formon the base ring for more detail.EXAMPLES:
An example over the ring of integers of a number field (of class number 1):
sage: # needs sage.rings.number_field sage: x = polygen(ZZ, 'x') sage: OE.<w> = EquationOrder(x^2 - x + 2) sage: m = Matrix([[1, w], [w, 7]]) sage: d, u, v = m.smith_form() sage: (d, u, v) ( [ 1 0] [ 1 0] [ 1 -w] [ 0 -w + 9], [-w 1], [ 0 1] ) sage: u * m * v == d True sage: u.base_ring() == v.base_ring() == d.base_ring() == OE True sage: u.det().is_unit() and v.det().is_unit() True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> x = polygen(ZZ, 'x') >>> OE = EquationOrder(x**Integer(2) - x + Integer(2), names=('w',)); (w,) = OE._first_ngens(1) >>> m = Matrix([[Integer(1), w], [w, Integer(7)]]) >>> d, u, v = m.smith_form() >>> (d, u, v) ( [ 1 0] [ 1 0] [ 1 -w] [ 0 -w + 9], [-w 1], [ 0 1] ) >>> u * m * v == d True >>> u.base_ring() == v.base_ring() == d.base_ring() == OE True >>> u.det().is_unit() and v.det().is_unit() True
# needs sage.rings.number_field x = polygen(ZZ, 'x') OE.<w> = EquationOrder(x^2 - x + 2) m = Matrix([[1, w], [w, 7]]) d, u, v = m.smith_form() (d, u, v) u * m * v == d u.base_ring() == v.base_ring() == d.base_ring() == OE u.det().is_unit() and v.det().is_unit()
An example over the polynomial ring QQ[x]:
sage: R.<x> = QQ[]; m = x*matrix(R, 2, 2, 1) - matrix(R, 2, 2, [3,-4,1,-1]) sage: m.smith_form() ( [ 1 0] [ 0 -1] [ 1 x + 1] [ 0 x^2 - 2*x + 1], [ 1 x - 3], [ 0 1] )
>>> from sage.all import * >>> R = QQ['x']; (x,) = R._first_ngens(1); m = x*matrix(R, Integer(2), Integer(2), Integer(1)) - matrix(R, Integer(2), Integer(2), [Integer(3),-Integer(4),Integer(1),-Integer(1)]) >>> m.smith_form() ( [ 1 0] [ 0 -1] [ 1 x + 1] [ 0 x^2 - 2*x + 1], [ 1 x - 3], [ 0 1] )
R.<x> = QQ[]; m = x*matrix(R, 2, 2, 1) - matrix(R, 2, 2, [3,-4,1,-1]) m.smith_form()
An example over a field:
sage: m = matrix(GF(17), 3, 3, [11,5,1, 3,6,8, 1,16,0]) sage: d, u, v = m.smith_form() sage: d [1 0 0] [0 1 0] [0 0 0] sage: u * m * v == d True
>>> from sage.all import * >>> m = matrix(GF(Integer(17)), Integer(3), Integer(3), [Integer(11),Integer(5),Integer(1), Integer(3),Integer(6),Integer(8), Integer(1),Integer(16),Integer(0)]) >>> d, u, v = m.smith_form() >>> d [1 0 0] [0 1 0] [0 0 0] >>> u * m * v == d True
m = matrix(GF(17), 3, 3, [11,5,1, 3,6,8, 1,16,0]) d, u, v = m.smith_form() d u * m * v == d
When the base ring has a
ring_of_integersmethod and supports denominators, you can get an integral version of the smith form:sage: m = matrix(QQ, 2, 2, [17/6, 47/6, 25/6, 23/2]) sage: m.smith_form() ( [1 0] [6/17 0] [ 1 -47/17] [0 1], [ 75 -51], [ 0 1] ) sage: m.smith_form(integral=True) ( [1/6 0] [ 3 -2] [ 1 3] [ 0 1/3], [-25 17], [ 0 -1] )
>>> from sage.all import * >>> m = matrix(QQ, Integer(2), Integer(2), [Integer(17)/Integer(6), Integer(47)/Integer(6), Integer(25)/Integer(6), Integer(23)/Integer(2)]) >>> m.smith_form() ( [1 0] [6/17 0] [ 1 -47/17] [0 1], [ 75 -51], [ 0 1] ) >>> m.smith_form(integral=True) ( [1/6 0] [ 3 -2] [ 1 3] [ 0 1/3], [-25 17], [ 0 -1] )
m = matrix(QQ, 2, 2, [17/6, 47/6, 25/6, 23/2]) m.smith_form() m.smith_form(integral=True)
Some examples over non-PID’s work anyway:
sage: # needs sage.rings.number_field sage: R.<s> = EquationOrder(x^2 + 5) # class number 2 sage: A = matrix(R, 2, 2, [s - 1, -s, -s, 2*s + 1]) sage: D, U, V = A.smith_form() sage: D, U, V ( [ 1 0] [ 4 s + 4] [ 1 -5*s + 6] [ 0 -s - 6], [ s s - 1], [ 0 1] ) sage: D == U * A * V True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> R = EquationOrder(x**Integer(2) + Integer(5), names=('s',)); (s,) = R._first_ngens(1)# class number 2 >>> A = matrix(R, Integer(2), Integer(2), [s - Integer(1), -s, -s, Integer(2)*s + Integer(1)]) >>> D, U, V = A.smith_form() >>> D, U, V ( [ 1 0] [ 4 s + 4] [ 1 -5*s + 6] [ 0 -s - 6], [ s s - 1], [ 0 1] ) >>> D == U * A * V True
# needs sage.rings.number_field R.<s> = EquationOrder(x^2 + 5) # class number 2 A = matrix(R, 2, 2, [s - 1, -s, -s, 2*s + 1]) D, U, V = A.smith_form() D, U, V D == U * A * V
Others don’t, but they fail quite constructively:
sage: matrix(R, 2, 2, [s - 1, -s - 2, -2*s, -s - 2]).smith_form() # needs sage.rings.number_field Traceback (most recent call last): ... ArithmeticError: Ideal Fractional ideal (2, s + 1) not principal
>>> from sage.all import * >>> matrix(R, Integer(2), Integer(2), [s - Integer(1), -s - Integer(2), -Integer(2)*s, -s - Integer(2)]).smith_form() # needs sage.rings.number_field Traceback (most recent call last): ... ArithmeticError: Ideal Fractional ideal (2, s + 1) not principal
matrix(R, 2, 2, [s - 1, -s - 2, -2*s, -s - 2]).smith_form() # needs sage.rings.number_field
Empty matrices are handled safely:
sage: # needs sage.rings.number_field sage: m = MatrixSpace(OE, 2,0)(0) sage: d, u, v = m.smith_form(); u * m * v == d True sage: m = MatrixSpace(OE, 0,2)(0) sage: d, u, v = m.smith_form(); u * m * v == d True sage: m = MatrixSpace(OE, 0,0)(0) sage: d, u, v = m.smith_form(); u * m * v == d True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> m = MatrixSpace(OE, Integer(2),Integer(0))(Integer(0)) >>> d, u, v = m.smith_form(); u * m * v == d True >>> m = MatrixSpace(OE, Integer(0),Integer(2))(Integer(0)) >>> d, u, v = m.smith_form(); u * m * v == d True >>> m = MatrixSpace(OE, Integer(0),Integer(0))(Integer(0)) >>> d, u, v = m.smith_form(); u * m * v == d True
# needs sage.rings.number_field m = MatrixSpace(OE, 2,0)(0) d, u, v = m.smith_form(); u * m * v == d m = MatrixSpace(OE, 0,2)(0) d, u, v = m.smith_form(); u * m * v == d m = MatrixSpace(OE, 0,0)(0) d, u, v = m.smith_form(); u * m * v == d
Some pathological cases that crashed earlier versions:
sage: # needs sage.rings.number_field sage: m = Matrix(OE, [[ 2*w, 2*w - 1, -w + 1], ....: [ 2*w + 2, -2*w - 1, w - 1], ....: [-2*w - 1, -2*w - 2, 2*w - 1]]) sage: d, u, v = m.smith_form(); u * m * v == d True sage: m = matrix(OE, [[-5*w - 1, -2*w - 2, 4*w - 10], ....: [ 8*w, -w, w - 1], ....: [ -1, 1, -8]]) sage: d, u, v = m.smith_form(); u * m * v == d True
>>> from sage.all import * >>> # needs sage.rings.number_field >>> m = Matrix(OE, [[ Integer(2)*w, Integer(2)*w - Integer(1), -w + Integer(1)], ... [ Integer(2)*w + Integer(2), -Integer(2)*w - Integer(1), w - Integer(1)], ... [-Integer(2)*w - Integer(1), -Integer(2)*w - Integer(2), Integer(2)*w - Integer(1)]]) >>> d, u, v = m.smith_form(); u * m * v == d True >>> m = matrix(OE, [[-Integer(5)*w - Integer(1), -Integer(2)*w - Integer(2), Integer(4)*w - Integer(10)], ... [ Integer(8)*w, -w, w - Integer(1)], ... [ -Integer(1), Integer(1), -Integer(8)]]) >>> d, u, v = m.smith_form(); u * m * v == d True
# needs sage.rings.number_field m = Matrix(OE, [[ 2*w, 2*w - 1, -w + 1], [ 2*w + 2, -2*w - 1, w - 1], [-2*w - 1, -2*w - 2, 2*w - 1]]) d, u, v = m.smith_form(); u * m * v == d m = matrix(OE, [[-5*w - 1, -2*w - 2, 4*w - 10], [ 8*w, -w, w - 1], [ -1, 1, -8]]) d, u, v = m.smith_form(); u * m * v == dOver local fields, we can request the transformation matrices to be integral:;
sage: K = Qp(2, 5, print_mode=’terse’) # needs sage.rings.padics sage: M = matrix(K, 2, 3, [1/2, 1, 2, 1/3, 1, 3]) # needs sage.rings.padics sage: M.smith_form(integral=True) # needs sage.rings.padics ( [1/2 + O(2^4) 0 0] [ 1 + O(2^5) 0] [ 0 1 + O(2^5) 0], [42 + O(2^6) 1 + O(2^5)], <BLANKLINE> [ 1 + O(2^5) 26 + O(2^5) 6 + O(2^5)] [ O(2^4) 3 + O(2^4) 11 + O(2^4)] [ 0 0 1 + O(2^5)] )
- solve_left(B, check=True, extend=True)[source]¶
Try to find a solution \(X\) to the equation \(X A = B\).
If
selfis a matrix \(A\), then this function returns a vector or matrix \(X\) such that \(X A = B\). If \(B\) is a vector then \(X\) is a vector and if \(B\) is a matrix, then \(X\) is a matrix.Over inexact rings, the output of this function may not be an exact solution. For example, over the real or complex double field, this method computes a least-squares solution if the system is not square.
INPUT:
B– a matrix or vectorextend– boolean (default:True); when set toTrue, some solvers will return solutions over a larger ring than the base ring of the inputs (a typical case are rational solutions for integer linear systems). When set toFalse, a solution over the base ring is returned, with aValueErrorbeing raised if none exists.check– boolean (default:True); verify the answer if the system is non-square or rank-deficient, and if its entries lie in an exact ring. Meaningless over most inexact rings, or when the system is square and of full rank.
OUTPUT:
If the system is square and has full rank, the unique solution is returned, and no check is done on the answer. Over inexact rings, you should expect this answer to be inexact. Moreover, due to the numerical issues involved, an error may be thrown in this case – specifically if the system is singular but if SageMath fails to notice that.
If the system is not square or does not have full rank, then a solution is attempted via other means. For example, over
RDForCDFa least-squares solution is returned, as with MATLAB’s “backslash” operator. For most inexact rings, thecheckparameter is ignored because an approximate solution will be returned in any case. Over exact rings, on the other hand, setting thecheckparameter results in an additional test to determine whether or not the answer actually solves the system exactly. If a symbolic system involves only exact elements, its solution can still be checked.If \(B\) is a vector, the result is returned as a vector, as well, and as a matrix, otherwise.
See also
EXAMPLES:
sage: A = matrix(QQ, 4,2, [0, -1, 1, 0, -2, 2, 1, 0]) sage: B = matrix(QQ, 2,2, [1, 0, 1, -1]) sage: X = A.solve_left(B) sage: X*A == B True sage: X == B / A True
>>> from sage.all import * >>> A = matrix(QQ, Integer(4),Integer(2), [Integer(0), -Integer(1), Integer(1), Integer(0), -Integer(2), Integer(2), Integer(1), Integer(0)]) >>> B = matrix(QQ, Integer(2),Integer(2), [Integer(1), Integer(0), Integer(1), -Integer(1)]) >>> X = A.solve_left(B) >>> X*A == B True >>> X == B / A True
A = matrix(QQ, 4,2, [0, -1, 1, 0, -2, 2, 1, 0]) B = matrix(QQ, 2,2, [1, 0, 1, -1]) X = A.solve_left(B) X*A == B X == B / A
sage: A = matrix([(3, -1, 0, 0), (1, 1, -2, 0), (0, 0, 0, -3)]) sage: B = matrix(QQ, 3, 1, [0, 0, -1]) sage: A.solve_left(B) Traceback (most recent call last): ... ValueError: number of columns of self must equal number of columns of right-hand side
>>> from sage.all import * >>> A = matrix([(Integer(3), -Integer(1), Integer(0), Integer(0)), (Integer(1), Integer(1), -Integer(2), Integer(0)), (Integer(0), Integer(0), Integer(0), -Integer(3))]) >>> B = matrix(QQ, Integer(3), Integer(1), [Integer(0), Integer(0), -Integer(1)]) >>> A.solve_left(B) Traceback (most recent call last): ... ValueError: number of columns of self must equal number of columns of right-hand side
A = matrix([(3, -1, 0, 0), (1, 1, -2, 0), (0, 0, 0, -3)]) B = matrix(QQ, 3, 1, [0, 0, -1]) A.solve_left(B)
>>> from sage.all import * >>> A = matrix([(Integer(3), -Integer(1), Integer(0), Integer(0)), (Integer(1), Integer(1), -Integer(2), Integer(0)), (Integer(0), Integer(0), Integer(0), -Integer(3))]) >>> B = matrix(QQ, Integer(3), Integer(1), [Integer(0), Integer(0), -Integer(1)]) >>> A.solve_left(B) Traceback (most recent call last): ... ValueError: number of columns of self must equal number of columns of right-hand side
A = matrix([(3, -1, 0, 0), (1, 1, -2, 0), (0, 0, 0, -3)]) B = matrix(QQ, 3, 1, [0, 0, -1]) A.solve_left(B)
Over the reals:
sage: A = matrix(RDF, 3,3, [1,2,5,7.6,2.3,1,1,2,-1]); A [ 1.0 2.0 5.0] [ 7.6 2.3 1.0] [ 1.0 2.0 -1.0] sage: b = vector(RDF,[1,2,3]) sage: x = A.solve_left(b); x.zero_at(2e-17) # fix noisy zeroes # needs scipy (0.666666666..., 0.0, 0.333333333...) sage: x.parent() # needs scipy Vector space of dimension 3 over Real Double Field sage: x*A # tol 1e-14 # needs scipy (0.9999999999999999, 1.9999999999999998, 3.0)
>>> from sage.all import * >>> A = matrix(RDF, Integer(3),Integer(3), [Integer(1),Integer(2),Integer(5),RealNumber('7.6'),RealNumber('2.3'),Integer(1),Integer(1),Integer(2),-Integer(1)]); A [ 1.0 2.0 5.0] [ 7.6 2.3 1.0] [ 1.0 2.0 -1.0] >>> b = vector(RDF,[Integer(1),Integer(2),Integer(3)]) >>> x = A.solve_left(b); x.zero_at(RealNumber('2e-17')) # fix noisy zeroes # needs scipy (0.666666666..., 0.0, 0.333333333...) >>> x.parent() # needs scipy Vector space of dimension 3 over Real Double Field >>> x*A # tol 1e-14 # needs scipy (0.9999999999999999, 1.9999999999999998, 3.0)
A = matrix(RDF, 3,3, [1,2,5,7.6,2.3,1,1,2,-1]); A b = vector(RDF,[1,2,3]) x = A.solve_left(b); x.zero_at(2e-17) # fix noisy zeroes # needs scipy x.parent() # needs scipy x*A # tol 1e-14 # needs scipy
Over the complex numbers:
sage: # needs sage.rings.complex_double sage.symbolic sage: A = matrix(CDF, [[ 0, -1 + 2*I, 1 - 3*I, I], ....: [2 + 4*I, -2 + 3*I, -1 + 2*I, -1 - I], ....: [ 2 + I, 1 - I, -1, 5], ....: [ 3*I, -1 - I, -1 + I, -3 + I]]) sage: b = vector(CDF, [2 -3*I, 3, -2 + 3*I, 8]) sage: x = A.solve_left(b); x # needs scipy (-1.55765124... - 0.644483985...*I, 0.183274021... + 0.286476868...*I, 0.270818505... + 0.246619217...*I, -1.69003558... - 0.828113879...*I) sage: x.parent() # needs scipy Vector space of dimension 4 over Complex Double Field sage: abs(x*A - b) < 1e-14 # needs scipy True
>>> from sage.all import * >>> # needs sage.rings.complex_double sage.symbolic >>> A = matrix(CDF, [[ Integer(0), -Integer(1) + Integer(2)*I, Integer(1) - Integer(3)*I, I], ... [Integer(2) + Integer(4)*I, -Integer(2) + Integer(3)*I, -Integer(1) + Integer(2)*I, -Integer(1) - I], ... [ Integer(2) + I, Integer(1) - I, -Integer(1), Integer(5)], ... [ Integer(3)*I, -Integer(1) - I, -Integer(1) + I, -Integer(3) + I]]) >>> b = vector(CDF, [Integer(2) -Integer(3)*I, Integer(3), -Integer(2) + Integer(3)*I, Integer(8)]) >>> x = A.solve_left(b); x # needs scipy (-1.55765124... - 0.644483985...*I, 0.183274021... + 0.286476868...*I, 0.270818505... + 0.246619217...*I, -1.69003558... - 0.828113879...*I) >>> x.parent() # needs scipy Vector space of dimension 4 over Complex Double Field >>> abs(x*A - b) < RealNumber('1e-14') # needs scipy True
# needs sage.rings.complex_double sage.symbolic A = matrix(CDF, [[ 0, -1 + 2*I, 1 - 3*I, I], [2 + 4*I, -2 + 3*I, -1 + 2*I, -1 - I], [ 2 + I, 1 - I, -1, 5], [ 3*I, -1 - I, -1 + I, -3 + I]]) b = vector(CDF, [2 -3*I, 3, -2 + 3*I, 8]) x = A.solve_left(b); x # needs scipy x.parent() # needs scipy abs(x*A - b) < 1e-14 # needs scipyIf
bis given as a matrix, the result will be a matrix, as well:sage: A = matrix(RDF, 3, 3, [2, 5, 0, 7, 7, -2, -4.3, 0, 1]) sage: b = matrix(RDF, 2, 3, [2, -4, -5, 1, 1, 0.1]) sage: A.solve_left(b) # tol 1e-14 # needs scipy [ -6.495454545454545 4.068181818181818 3.1363636363636354] [ 0.5277272727272727 -0.2340909090909091 -0.36818181818181817]
>>> from sage.all import * >>> A = matrix(RDF, Integer(3), Integer(3), [Integer(2), Integer(5), Integer(0), Integer(7), Integer(7), -Integer(2), -RealNumber('4.3'), Integer(0), Integer(1)]) >>> b = matrix(RDF, Integer(2), Integer(3), [Integer(2), -Integer(4), -Integer(5), Integer(1), Integer(1), RealNumber('0.1')]) >>> A.solve_left(b) # tol 1e-14 # needs scipy [ -6.495454545454545 4.068181818181818 3.1363636363636354] [ 0.5277272727272727 -0.2340909090909091 -0.36818181818181817]
A = matrix(RDF, 3, 3, [2, 5, 0, 7, 7, -2, -4.3, 0, 1]) b = matrix(RDF, 2, 3, [2, -4, -5, 1, 1, 0.1]) A.solve_left(b) # tol 1e-14 # needs scipy
If \(A\) is a non-square matrix, the result is a least-squares solution. For a tall matrix, this may give a solution with a least-squares error of almost zero:
sage: A = matrix(RDF, 3, 2, [1, 3, 4, 2, 0, -3]) sage: b = vector(RDF, [5, 6]) sage: x = A.solve_left(b) # needs scipy sage: (x * A - b).norm() < 1e-14 # needs scipy True
>>> from sage.all import * >>> A = matrix(RDF, Integer(3), Integer(2), [Integer(1), Integer(3), Integer(4), Integer(2), Integer(0), -Integer(3)]) >>> b = vector(RDF, [Integer(5), Integer(6)]) >>> x = A.solve_left(b) # needs scipy >>> (x * A - b).norm() < RealNumber('1e-14') # needs scipy True
A = matrix(RDF, 3, 2, [1, 3, 4, 2, 0, -3]) b = vector(RDF, [5, 6]) x = A.solve_left(b) # needs scipy (x * A - b).norm() < 1e-14 # needs scipy
For a wide matrix \(A\), the error is usually not small:
sage: A = matrix(RDF, 2, 3, [1, 3, 4, 2, 0, -3]) sage: b = vector(RDF, [5, 6, 1]) sage: x = A.solve_left(b) # needs scipy sage: (x * A - b).norm() # tol 1e-14 # needs scipy 0.9723055853282466
>>> from sage.all import * >>> A = matrix(RDF, Integer(2), Integer(3), [Integer(1), Integer(3), Integer(4), Integer(2), Integer(0), -Integer(3)]) >>> b = vector(RDF, [Integer(5), Integer(6), Integer(1)]) >>> x = A.solve_left(b) # needs scipy >>> (x * A - b).norm() # tol 1e-14 # needs scipy 0.9723055853282466
A = matrix(RDF, 2, 3, [1, 3, 4, 2, 0, -3]) b = vector(RDF, [5, 6, 1]) x = A.solve_left(b) # needs scipy (x * A - b).norm() # tol 1e-14 # needs scipy
- solve_right(B, check=True, extend=True)[source]¶
Try to find a solution \(X\) to the equation \(A X = B\).
If
selfis a matrix \(A\), then this function returns a vector or matrix \(X\) such that \(A X = B\). If \(B\) is a vector then \(X\) is a vector and if \(B\) is a matrix, then \(X\) is a matrix.Over inexact rings, the output of this function may not be an exact solution. For example, over the real or complex double field, this method computes a least-squares solution if the system is not square.
INPUT:
B– a matrix or vectorextend– boolean (default:True); when set toTrue, some solvers will return solutions over a larger ring than the base ring of the inputs (a typical case are rational solutions for integer linear systems). When set toFalse, a solution over the base ring is returned, with aValueErrorbeing raised if none exists.check– boolean (default:True); verify the answer if the system is non-square or rank-deficient, and if its entries lie in an exact ring. Meaningless over most inexact rings, or when the system is square and of full rank.
OUTPUT:
If the system is square and has full rank, the unique solution is returned, and no check is done on the answer. Over inexact rings, you should expect this answer to be inexact. Moreover, due to the numerical issues involved, an error may be thrown in this case – specifically if the system is singular but if SageMath fails to notice that.
If the system is not square or does not have full rank, then a solution is attempted via other means. For example, over
RDForCDFa least-squares solution is returned, as with MATLAB’s “backslash” operator. For most inexact rings, thecheckparameter is ignored because an approximate solution will be returned in any case. Over exact rings, on the other hand, setting thecheckparameter results in an additional test to determine whether or not the answer actually solves the system exactly. If a symbolic system involves only exact elements, its solution can still be checked.If \(B\) is a vector, the result is returned as a vector, as well, and as a matrix, otherwise.
See also
EXAMPLES:
sage: A = matrix(QQ, 3, [1,2,3,-1,2,5,2,3,1]) sage: b = vector(QQ, [1,2,3]) sage: x = A.solve_right(b); x (-13/12, 23/12, -7/12) sage: A * x (1, 2, 3)
>>> from sage.all import * >>> A = matrix(QQ, Integer(3), [Integer(1),Integer(2),Integer(3),-Integer(1),Integer(2),Integer(5),Integer(2),Integer(3),Integer(1)]) >>> b = vector(QQ, [Integer(1),Integer(2),Integer(3)]) >>> x = A.solve_right(b); x (-13/12, 23/12, -7/12) >>> A * x (1, 2, 3)
A = matrix(QQ, 3, [1,2,3,-1,2,5,2,3,1]) b = vector(QQ, [1,2,3]) x = A.solve_right(b); x A * x
We solve with A nonsquare:
sage: A = matrix(QQ, 2,4, [0, -1, 1, 0, -2, 2, 1, 0]) sage: B = matrix(QQ, 2,2, [1, 0, 1, -1]) sage: X = A.solve_right(B); X [-3/2 1/2] [ -1 0] [ 0 0] [ 0 0] sage: A*X == B True
>>> from sage.all import * >>> A = matrix(QQ, Integer(2),Integer(4), [Integer(0), -Integer(1), Integer(1), Integer(0), -Integer(2), Integer(2), Integer(1), Integer(0)]) >>> B = matrix(QQ, Integer(2),Integer(2), [Integer(1), Integer(0), Integer(1), -Integer(1)]) >>> X = A.solve_right(B); X [-3/2 1/2] [ -1 0] [ 0 0] [ 0 0] >>> A*X == B True
A = matrix(QQ, 2,4, [0, -1, 1, 0, -2, 2, 1, 0]) B = matrix(QQ, 2,2, [1, 0, 1, -1]) X = A.solve_right(B); X A*X == B
Another nonsingular example:
sage: A = matrix(QQ,2,3, [1,2,3,2,4,6]); v = vector([-1/2,-1]) sage: x = A.solve_right(v); x (-1/2, 0, 0) sage: A*x == v True
>>> from sage.all import * >>> A = matrix(QQ,Integer(2),Integer(3), [Integer(1),Integer(2),Integer(3),Integer(2),Integer(4),Integer(6)]); v = vector([-Integer(1)/Integer(2),-Integer(1)]) >>> x = A.solve_right(v); x (-1/2, 0, 0) >>> A*x == v True
A = matrix(QQ,2,3, [1,2,3,2,4,6]); v = vector([-1/2,-1]) x = A.solve_right(v); x A*x == v
Same example but over \(\ZZ\):
sage: A = matrix(ZZ,2,3, [1,2,3,2,4,6]); v = vector([-1,-2]) sage: A.solve_right(v) (-1, 0, 0)
>>> from sage.all import * >>> A = matrix(ZZ,Integer(2),Integer(3), [Integer(1),Integer(2),Integer(3),Integer(2),Integer(4),Integer(6)]); v = vector([-Integer(1),-Integer(2)]) >>> A.solve_right(v) (-1, 0, 0)
A = matrix(ZZ,2,3, [1,2,3,2,4,6]); v = vector([-1,-2]) A.solve_right(v)
An example in which there is no solution:
sage: A = matrix(QQ,2,3, [1,2,3,2,4,6]); v = vector([1,1]) sage: A.solve_right(v) Traceback (most recent call last): ... ValueError: matrix equation has no solutions
>>> from sage.all import * >>> A = matrix(QQ,Integer(2),Integer(3), [Integer(1),Integer(2),Integer(3),Integer(2),Integer(4),Integer(6)]); v = vector([Integer(1),Integer(1)]) >>> A.solve_right(v) Traceback (most recent call last): ... ValueError: matrix equation has no solutions
A = matrix(QQ,2,3, [1,2,3,2,4,6]); v = vector([1,1]) A.solve_right(v)
A
ValueErroris raised if the input is invalid:sage: A = matrix(QQ, 4,2, [0, -1, 1, 0, -2, 2, 1, 0]) sage: B = matrix(QQ, 2,2, [1, 0, 1, -1]) sage: X = A.solve_right(B) Traceback (most recent call last): ... ValueError: number of rows of self must equal number of rows of right-hand side
>>> from sage.all import * >>> A = matrix(QQ, Integer(4),Integer(2), [Integer(0), -Integer(1), Integer(1), Integer(0), -Integer(2), Integer(2), Integer(1), Integer(0)]) >>> B = matrix(QQ, Integer(2),Integer(2), [Integer(1), Integer(0), Integer(1), -Integer(1)]) >>> X = A.solve_right(B) Traceback (most recent call last): ... ValueError: number of rows of self must equal number of rows of right-hand side
A = matrix(QQ, 4,2, [0, -1, 1, 0, -2, 2, 1, 0]) B = matrix(QQ, 2,2, [1, 0, 1, -1]) X = A.solve_right(B)
We solve with A singular:
sage: A = matrix(QQ, 2,3, [1,2,3,2,4,6]); B = matrix(QQ, 2,2, [6, -6, 12, -12]) sage: X = A.solve_right(B); X [ 6 -6] [ 0 0] [ 0 0] sage: A*X == B True
>>> from sage.all import * >>> A = matrix(QQ, Integer(2),Integer(3), [Integer(1),Integer(2),Integer(3),Integer(2),Integer(4),Integer(6)]); B = matrix(QQ, Integer(2),Integer(2), [Integer(6), -Integer(6), Integer(12), -Integer(12)]) >>> X = A.solve_right(B); X [ 6 -6] [ 0 0] [ 0 0] >>> A*X == B True
A = matrix(QQ, 2,3, [1,2,3,2,4,6]); B = matrix(QQ, 2,2, [6, -6, 12, -12]) X = A.solve_right(B); X A*X == B
We illustrate left associativity, etc., of the
solve_rightoperator.sage: A = matrix(QQ, 2, [1,2,3,4]) sage: A.solve_right(A) [1 0] [0 1] sage: (A.solve_right(A)).solve_right(A) [1 2] [3 4] sage: A.parent()(1).solve_right(A) [1 2] [3 4] sage: A.solve_right(A.solve_right(A)) [ -2 1] [ 3/2 -1/2] sage: X = A.solve_right(A - 2); X [ 5 -2] [-3 2] sage: A * X [-1 2] [ 3 2]
>>> from sage.all import * >>> A = matrix(QQ, Integer(2), [Integer(1),Integer(2),Integer(3),Integer(4)]) >>> A.solve_right(A) [1 0] [0 1] >>> (A.solve_right(A)).solve_right(A) [1 2] [3 4] >>> A.parent()(Integer(1)).solve_right(A) [1 2] [3 4] >>> A.solve_right(A.solve_right(A)) [ -2 1] [ 3/2 -1/2] >>> X = A.solve_right(A - Integer(2)); X [ 5 -2] [-3 2] >>> A * X [-1 2] [ 3 2]
A = matrix(QQ, 2, [1,2,3,4]) A.solve_right(A) (A.solve_right(A)).solve_right(A) A.parent()(1).solve_right(A) A.solve_right(A.solve_right(A)) X = A.solve_right(A - 2); X A * X
Solving over a polynomial ring:
sage: x = polygen(QQ, 'x') sage: A = matrix(2, [x, 2*x, -5*x^2 + 1, 3]) sage: v = vector([3, 4*x - 2]) sage: X = A.solve_right(v) sage: X ((-4/5*x^2 + 2/5*x + 9/10)/(x^3 + 1/10*x), (19/10*x^2 - 1/5*x - 3/10)/(x^3 + 1/10*x)) sage: A * X == v True
>>> from sage.all import * >>> x = polygen(QQ, 'x') >>> A = matrix(Integer(2), [x, Integer(2)*x, -Integer(5)*x**Integer(2) + Integer(1), Integer(3)]) >>> v = vector([Integer(3), Integer(4)*x - Integer(2)]) >>> X = A.solve_right(v) >>> X ((-4/5*x^2 + 2/5*x + 9/10)/(x^3 + 1/10*x), (19/10*x^2 - 1/5*x - 3/10)/(x^3 + 1/10*x)) >>> A * X == v True
x = polygen(QQ, 'x') A = matrix(2, [x, 2*x, -5*x^2 + 1, 3]) v = vector([3, 4*x - 2]) X = A.solve_right(v) X A * X == v
Solving some systems over \(\ZZ/n\ZZ\):
sage: # needs sage.libs.pari sage: A = Matrix(Zmod(6), 3, 2, [1,2,3,4,5,6]) sage: B = vector(Zmod(6), [1,1,1]) sage: A.solve_right(B) (5, 1) sage: B = vector(Zmod(6), [5,1,1]) sage: A.solve_right(B) Traceback (most recent call last): ... ValueError: matrix equation has no solutions sage: A = Matrix(Zmod(128), 2, 3, [23,11,22,4,1,0]) sage: B = Matrix(Zmod(128), 2, 1, [1,0]) sage: A.solve_right(B) [ 5] [108] [127] sage: B = B.column(0) sage: A.solve_right(B) (5, 108, 127) sage: A = Matrix(Zmod(15), 3,4, range(12)) sage: B = Matrix(Zmod(15), 3,3, range(3,12)) sage: X = A.solve_right(B) sage: A*X == B True
>>> from sage.all import * >>> # needs sage.libs.pari >>> A = Matrix(Zmod(Integer(6)), Integer(3), Integer(2), [Integer(1),Integer(2),Integer(3),Integer(4),Integer(5),Integer(6)]) >>> B = vector(Zmod(Integer(6)), [Integer(1),Integer(1),Integer(1)]) >>> A.solve_right(B) (5, 1) >>> B = vector(Zmod(Integer(6)), [Integer(5),Integer(1),Integer(1)]) >>> A.solve_right(B) Traceback (most recent call last): ... ValueError: matrix equation has no solutions >>> A = Matrix(Zmod(Integer(128)), Integer(2), Integer(3), [Integer(23),Integer(11),Integer(22),Integer(4),Integer(1),Integer(0)]) >>> B = Matrix(Zmod(Integer(128)), Integer(2), Integer(1), [Integer(1),Integer(0)]) >>> A.solve_right(B) [ 5] [108] [127] >>> B = B.column(Integer(0)) >>> A.solve_right(B) (5, 108, 127) >>> A = Matrix(Zmod(Integer(15)), Integer(3),Integer(4), range(Integer(12))) >>> B = Matrix(Zmod(Integer(15)), Integer(3),Integer(3), range(Integer(3),Integer(12))) >>> X = A.solve_right(B) >>> A*X == B True
# needs sage.libs.pari A = Matrix(Zmod(6), 3, 2, [1,2,3,4,5,6]) B = vector(Zmod(6), [1,1,1]) A.solve_right(B) B = vector(Zmod(6), [5,1,1]) A.solve_right(B) A = Matrix(Zmod(128), 2, 3, [23,11,22,4,1,0]) B = Matrix(Zmod(128), 2, 1, [1,0]) A.solve_right(B) B = B.column(0) A.solve_right(B) A = Matrix(Zmod(15), 3,4, range(12)) B = Matrix(Zmod(15), 3,3, range(3,12)) X = A.solve_right(B) A*X == B
Solving a system over the \(p\)-adics:
sage: # needs sage.rings.padics sage: k = Qp(5, 4) sage: a = matrix(k, 3, [1,7,3, 2,5,4, 1,1,2]); a [ 1 + O(5^4) 2 + 5 + O(5^4) 3 + O(5^4)] [ 2 + O(5^4) 5 + O(5^5) 4 + O(5^4)] [ 1 + O(5^4) 1 + O(5^4) 2 + O(5^4)] sage: v = vector(k, 3, [1,2,3]) sage: x = a.solve_right(v); x (4 + 5 + 5^2 + 3*5^3 + O(5^4), 2 + 5 + 3*5^2 + 5^3 + O(5^4), 1 + 5 + O(5^4)) sage: a * x == v True
>>> from sage.all import * >>> # needs sage.rings.padics >>> k = Qp(Integer(5), Integer(4)) >>> a = matrix(k, Integer(3), [Integer(1),Integer(7),Integer(3), Integer(2),Integer(5),Integer(4), Integer(1),Integer(1),Integer(2)]); a [ 1 + O(5^4) 2 + 5 + O(5^4) 3 + O(5^4)] [ 2 + O(5^4) 5 + O(5^5) 4 + O(5^4)] [ 1 + O(5^4) 1 + O(5^4) 2 + O(5^4)] >>> v = vector(k, Integer(3), [Integer(1),Integer(2),Integer(3)]) >>> x = a.solve_right(v); x (4 + 5 + 5^2 + 3*5^3 + O(5^4), 2 + 5 + 3*5^2 + 5^3 + O(5^4), 1 + 5 + O(5^4)) >>> a * x == v True
# needs sage.rings.padics k = Qp(5, 4) a = matrix(k, 3, [1,7,3, 2,5,4, 1,1,2]); a v = vector(k, 3, [1,2,3]) x = a.solve_right(v); x a * x == v
Solving a system of linear equations symbolically using symbolic matrices:
sage: # needs sage.symbolic sage: var('a,b,c,d,x,y') (a, b, c, d, x, y) sage: A = matrix(SR, 2, [a,b,c,d]); A [a b] [c d] sage: result = vector(SR, [3,5]); result (3, 5) sage: soln = A.solve_right(result); soln (-b*(3*c/a - 5)/(a*(b*c/a - d)) + 3/a, (3*c/a - 5)/(b*c/a - d)) sage: (a*x + b*y).subs(x=soln[0], y=soln[1]).simplify_full() 3 sage: (c*x + d*y).subs(x=soln[0], y=soln[1]).simplify_full() 5 sage: (A*soln).apply_map(lambda x: x.simplify_full()) (3, 5)
>>> from sage.all import * >>> # needs sage.symbolic >>> var('a,b,c,d,x,y') (a, b, c, d, x, y) >>> A = matrix(SR, Integer(2), [a,b,c,d]); A [a b] [c d] >>> result = vector(SR, [Integer(3),Integer(5)]); result (3, 5) >>> soln = A.solve_right(result); soln (-b*(3*c/a - 5)/(a*(b*c/a - d)) + 3/a, (3*c/a - 5)/(b*c/a - d)) >>> (a*x + b*y).subs(x=soln[Integer(0)], y=soln[Integer(1)]).simplify_full() 3 >>> (c*x + d*y).subs(x=soln[Integer(0)], y=soln[Integer(1)]).simplify_full() 5 >>> (A*soln).apply_map(lambda x: x.simplify_full()) (3, 5)
# needs sage.symbolic var('a,b,c,d,x,y') A = matrix(SR, 2, [a,b,c,d]); A result = vector(SR, [3,5]); result soln = A.solve_right(result); soln (a*x + b*y).subs(x=soln[0], y=soln[1]).simplify_full() (c*x + d*y).subs(x=soln[0], y=soln[1]).simplify_full() (A*soln).apply_map(lambda x: x.simplify_full())Over inexact rings, the output of this function may not be an exact solution. For example, over the real or complex double field, this computes a least-squares solution:
sage: A = matrix(RDF, 3, 2, [1, 3, 4, 2, 0, -3]) sage: b = vector(RDF, [5, 6, 1]) sage: A.solve_right(b) # tol 1e-14 # needs scipy (1.4782608695652177, 0.35177865612648235) sage: ~(A.T * A) * A.T * b # closed form solution, tol 1e-14 # needs scipy (1.4782608695652177, 0.35177865612648235)
>>> from sage.all import * >>> A = matrix(RDF, Integer(3), Integer(2), [Integer(1), Integer(3), Integer(4), Integer(2), Integer(0), -Integer(3)]) >>> b = vector(RDF, [Integer(5), Integer(6), Integer(1)]) >>> A.solve_right(b) # tol 1e-14 # needs scipy (1.4782608695652177, 0.35177865612648235) >>> ~(A.T * A) * A.T * b # closed form solution, tol 1e-14 # needs scipy (1.4782608695652177, 0.35177865612648235)
A = matrix(RDF, 3, 2, [1, 3, 4, 2, 0, -3]) b = vector(RDF, [5, 6, 1]) A.solve_right(b) # tol 1e-14 # needs scipy ~(A.T * A) * A.T * b # closed form solution, tol 1e-14 # needs scipy
Over the reals:
sage: A = matrix(RDF, 3,3, [1,2,5,7.6,2.3,1,1,2,-1]); A [ 1.0 2.0 5.0] [ 7.6 2.3 1.0] [ 1.0 2.0 -1.0] sage: b = vector(RDF, [1,2,3]) sage: x = A.solve_right(b); x # tol 1e-14 # needs scipy (-0.1136950904392765, 1.3901808785529717, -0.33333333333333337) sage: x.parent() # needs scipy Vector space of dimension 3 over Real Double Field sage: A*x # tol 1e-14 # needs scipy (1.0, 1.9999999999999996, 3.0000000000000004)
>>> from sage.all import * >>> A = matrix(RDF, Integer(3),Integer(3), [Integer(1),Integer(2),Integer(5),RealNumber('7.6'),RealNumber('2.3'),Integer(1),Integer(1),Integer(2),-Integer(1)]); A [ 1.0 2.0 5.0] [ 7.6 2.3 1.0] [ 1.0 2.0 -1.0] >>> b = vector(RDF, [Integer(1),Integer(2),Integer(3)]) >>> x = A.solve_right(b); x # tol 1e-14 # needs scipy (-0.1136950904392765, 1.3901808785529717, -0.33333333333333337) >>> x.parent() # needs scipy Vector space of dimension 3 over Real Double Field >>> A*x # tol 1e-14 # needs scipy (1.0, 1.9999999999999996, 3.0000000000000004)
A = matrix(RDF, 3,3, [1,2,5,7.6,2.3,1,1,2,-1]); A b = vector(RDF, [1,2,3]) x = A.solve_right(b); x # tol 1e-14 # needs scipy x.parent() # needs scipy A*x # tol 1e-14 # needs scipy
Over the complex numbers:
sage: # needs sage.rings.complex_double sage.symbolic sage: A = matrix(CDF, [[ 0, -1 + 2*I, 1 - 3*I, I], ....: [2 + 4*I, -2 + 3*I, -1 + 2*I, -1 - I], ....: [ 2 + I, 1 - I, -1, 5], ....: [ 3*I, -1 - I, -1 + I, -3 + I]]) sage: b = vector(CDF, [2 - 3*I, 3, -2 + 3*I, 8]) sage: x = A.solve_right(b); x # needs scipy (1.96841637... - 1.07606761...*I, -0.614323843... + 1.68416370...*I, 0.0733985765... + 1.73487544...*I, -1.6018683... + 0.524021352...*I) sage: x.parent() # needs scipy Vector space of dimension 4 over Complex Double Field sage: abs(A*x - b) < 1e-14 # needs scipy True
>>> from sage.all import * >>> # needs sage.rings.complex_double sage.symbolic >>> A = matrix(CDF, [[ Integer(0), -Integer(1) + Integer(2)*I, Integer(1) - Integer(3)*I, I], ... [Integer(2) + Integer(4)*I, -Integer(2) + Integer(3)*I, -Integer(1) + Integer(2)*I, -Integer(1) - I], ... [ Integer(2) + I, Integer(1) - I, -Integer(1), Integer(5)], ... [ Integer(3)*I, -Integer(1) - I, -Integer(1) + I, -Integer(3) + I]]) >>> b = vector(CDF, [Integer(2) - Integer(3)*I, Integer(3), -Integer(2) + Integer(3)*I, Integer(8)]) >>> x = A.solve_right(b); x # needs scipy (1.96841637... - 1.07606761...*I, -0.614323843... + 1.68416370...*I, 0.0733985765... + 1.73487544...*I, -1.6018683... + 0.524021352...*I) >>> x.parent() # needs scipy Vector space of dimension 4 over Complex Double Field >>> abs(A*x - b) < RealNumber('1e-14') # needs scipy True
# needs sage.rings.complex_double sage.symbolic A = matrix(CDF, [[ 0, -1 + 2*I, 1 - 3*I, I], [2 + 4*I, -2 + 3*I, -1 + 2*I, -1 - I], [ 2 + I, 1 - I, -1, 5], [ 3*I, -1 - I, -1 + I, -3 + I]]) b = vector(CDF, [2 - 3*I, 3, -2 + 3*I, 8]) x = A.solve_right(b); x # needs scipy x.parent() # needs scipy abs(A*x - b) < 1e-14 # needs scipyIf
bis given as a matrix, the result will be a matrix, as well:sage: A = matrix(RDF, 3, 3, [1, 2, 2, 3, 4, 5, 2, 2, 2]) sage: b = matrix(RDF, 3, 2, [3, 2, 3, 2, 3, 2]) sage: A.solve_right(b) # tol 1e-14 # needs scipy [ 0.0 0.0] [ 4.5 3.0] [-3.0 -2.0]
>>> from sage.all import * >>> A = matrix(RDF, Integer(3), Integer(3), [Integer(1), Integer(2), Integer(2), Integer(3), Integer(4), Integer(5), Integer(2), Integer(2), Integer(2)]) >>> b = matrix(RDF, Integer(3), Integer(2), [Integer(3), Integer(2), Integer(3), Integer(2), Integer(3), Integer(2)]) >>> A.solve_right(b) # tol 1e-14 # needs scipy [ 0.0 0.0] [ 4.5 3.0] [-3.0 -2.0]
A = matrix(RDF, 3, 3, [1, 2, 2, 3, 4, 5, 2, 2, 2]) b = matrix(RDF, 3, 2, [3, 2, 3, 2, 3, 2]) A.solve_right(b) # tol 1e-14 # needs scipy
If \(A\) is a non-square matrix, the result is a least-squares solution. For a wide matrix, this may give a solution with a least-squares error of almost zero:
sage: A = matrix(RDF, 2, 3, [1, 3, 4, 2, 0, -3]) sage: b = vector(RDF, [5, 6]) sage: x = A.solve_right(b) # needs scipy sage: (A * x - b).norm() < 1e-14 # needs scipy True
>>> from sage.all import * >>> A = matrix(RDF, Integer(2), Integer(3), [Integer(1), Integer(3), Integer(4), Integer(2), Integer(0), -Integer(3)]) >>> b = vector(RDF, [Integer(5), Integer(6)]) >>> x = A.solve_right(b) # needs scipy >>> (A * x - b).norm() < RealNumber('1e-14') # needs scipy True
A = matrix(RDF, 2, 3, [1, 3, 4, 2, 0, -3]) b = vector(RDF, [5, 6]) x = A.solve_right(b) # needs scipy (A * x - b).norm() < 1e-14 # needs scipy
For a tall matrix \(A\), the error is usually not small:
sage: A = matrix(RDF, 3, 2, [1, 3, 4, 2, 0, -3]) sage: b = vector(RDF, [5, 6, 1]) sage: x = A.solve_right(b) # needs scipy sage: (A * x - b).norm() # tol 1e-14 # needs scipy 3.2692119900020438
>>> from sage.all import * >>> A = matrix(RDF, Integer(3), Integer(2), [Integer(1), Integer(3), Integer(4), Integer(2), Integer(0), -Integer(3)]) >>> b = vector(RDF, [Integer(5), Integer(6), Integer(1)]) >>> x = A.solve_right(b) # needs scipy >>> (A * x - b).norm() # tol 1e-14 # needs scipy 3.2692119900020438
A = matrix(RDF, 3, 2, [1, 3, 4, 2, 0, -3]) b = vector(RDF, [5, 6, 1]) x = A.solve_right(b) # needs scipy (A * x - b).norm() # tol 1e-14 # needs scipy
- subdivide(row_lines=None, col_lines=None)[source]¶
Divide
selfinto logical submatrices which can then be queried and extracted.If a subdivision already exists, this method forgets the previous subdivision and flushes the cache.
INPUT:
row_lines–None, an integer, or a list of integers (lines at whichselfmust be split)col_lines–None, an integer, or a list of integers (columns at whichselfmust be split)
OUTPUT: none but changes
selfNote
One may also pass a tuple into the first argument which will be interpreted as
(row_lines, col_lines).EXAMPLES:
sage: # needs sage.libs.pari sage: M = matrix(5, 5, prime_range(100)) sage: M.subdivide(2,3); M [ 2 3 5| 7 11] [13 17 19|23 29] [--------+-----] [31 37 41|43 47] [53 59 61|67 71] [73 79 83|89 97] sage: M.subdivision(0,0) [ 2 3 5] [13 17 19] sage: M.subdivision(1,0) [31 37 41] [53 59 61] [73 79 83] sage: M.subdivision_entry(1,0,0,0) 31 sage: M.subdivisions() ([2], [3]) sage: M.subdivide(None, [1,3]); M [ 2| 3 5| 7 11] [13|17 19|23 29] [31|37 41|43 47] [53|59 61|67 71] [73|79 83|89 97]
>>> from sage.all import * >>> # needs sage.libs.pari >>> M = matrix(Integer(5), Integer(5), prime_range(Integer(100))) >>> M.subdivide(Integer(2),Integer(3)); M [ 2 3 5| 7 11] [13 17 19|23 29] [--------+-----] [31 37 41|43 47] [53 59 61|67 71] [73 79 83|89 97] >>> M.subdivision(Integer(0),Integer(0)) [ 2 3 5] [13 17 19] >>> M.subdivision(Integer(1),Integer(0)) [31 37 41] [53 59 61] [73 79 83] >>> M.subdivision_entry(Integer(1),Integer(0),Integer(0),Integer(0)) 31 >>> M.subdivisions() ([2], [3]) >>> M.subdivide(None, [Integer(1),Integer(3)]); M [ 2| 3 5| 7 11] [13|17 19|23 29] [31|37 41|43 47] [53|59 61|67 71] [73|79 83|89 97]
# needs sage.libs.pari M = matrix(5, 5, prime_range(100)) M.subdivide(2,3); M M.subdivision(0,0) M.subdivision(1,0) M.subdivision_entry(1,0,0,0) M.subdivisions() M.subdivide(None, [1,3]); M
Degenerate cases work too:
sage: # needs sage.libs.pari sage: M.subdivide([2,5], [0,1,3]); M [| 2| 3 5| 7 11] [|13|17 19|23 29] [+--+-----+-----] [|31|37 41|43 47] [|53|59 61|67 71] [|73|79 83|89 97] [+--+-----+-----] sage: M.subdivision(0,0) [] sage: M.subdivision(0,1) [ 2] [13] sage: M.subdivide([2,2,3], [0,0,1,1]); M [|| 2|| 3 5 7 11] [||13||17 19 23 29] [++--++-----------] [++--++-----------] [||31||37 41 43 47] [++--++-----------] [||53||59 61 67 71] [||73||79 83 89 97] sage: M.subdivision(0,0) [] sage: M.subdivision(2,4) [37 41 43 47]
>>> from sage.all import * >>> # needs sage.libs.pari >>> M.subdivide([Integer(2),Integer(5)], [Integer(0),Integer(1),Integer(3)]); M [| 2| 3 5| 7 11] [|13|17 19|23 29] [+--+-----+-----] [|31|37 41|43 47] [|53|59 61|67 71] [|73|79 83|89 97] [+--+-----+-----] >>> M.subdivision(Integer(0),Integer(0)) [] >>> M.subdivision(Integer(0),Integer(1)) [ 2] [13] >>> M.subdivide([Integer(2),Integer(2),Integer(3)], [Integer(0),Integer(0),Integer(1),Integer(1)]); M [|| 2|| 3 5 7 11] [||13||17 19 23 29] [++--++-----------] [++--++-----------] [||31||37 41 43 47] [++--++-----------] [||53||59 61 67 71] [||73||79 83 89 97] >>> M.subdivision(Integer(0),Integer(0)) [] >>> M.subdivision(Integer(2),Integer(4)) [37 41 43 47]
# needs sage.libs.pari M.subdivide([2,5], [0,1,3]); M M.subdivision(0,0) M.subdivision(0,1) M.subdivide([2,2,3], [0,0,1,1]); M M.subdivision(0,0) M.subdivision(2,4)
Indices do not need to be in the right order (Issue #14064):
sage: M.subdivide([4, 2], [3, 1]); M # needs sage.libs.pari [ 2| 3 5| 7 11] [13|17 19|23 29] [--+-----+-----] [31|37 41|43 47] [53|59 61|67 71] [--+-----+-----] [73|79 83|89 97]
>>> from sage.all import * >>> M.subdivide([Integer(4), Integer(2)], [Integer(3), Integer(1)]); M # needs sage.libs.pari [ 2| 3 5| 7 11] [13|17 19|23 29] [--+-----+-----] [31|37 41|43 47] [53|59 61|67 71] [--+-----+-----] [73|79 83|89 97]
M.subdivide([4, 2], [3, 1]); M # needs sage.libs.pari
- subdivision(i, j)[source]¶
Return an immutable copy of the (i,j)th submatrix of
self, according to a previously set subdivision.Before a subdivision is set, the only valid arguments are (0,0) which returns
self.EXAMPLES:
sage: M = matrix(3, 4, range(12)) sage: M.subdivide(1,2); M [ 0 1| 2 3] [-----+-----] [ 4 5| 6 7] [ 8 9|10 11] sage: M.subdivision(0,0) [0 1] sage: M.subdivision(0,1) [2 3] sage: M.subdivision(1,0) [4 5] [8 9]
>>> from sage.all import * >>> M = matrix(Integer(3), Integer(4), range(Integer(12))) >>> M.subdivide(Integer(1),Integer(2)); M [ 0 1| 2 3] [-----+-----] [ 4 5| 6 7] [ 8 9|10 11] >>> M.subdivision(Integer(0),Integer(0)) [0 1] >>> M.subdivision(Integer(0),Integer(1)) [2 3] >>> M.subdivision(Integer(1),Integer(0)) [4 5] [8 9]
M = matrix(3, 4, range(12)) M.subdivide(1,2); M M.subdivision(0,0) M.subdivision(0,1) M.subdivision(1,0)
It handles size-zero subdivisions as well.
sage: M = matrix(3, 4, range(12)) sage: M.subdivide([0],[0,2,2,4]); M [+-----++-----+] [| 0 1|| 2 3|] [| 4 5|| 6 7|] [| 8 9||10 11|] sage: M.subdivision(0,0) [] sage: M.subdivision(1,1) [0 1] [4 5] [8 9] sage: M.subdivision(1,2) [] sage: M.subdivision(1,0) [] sage: M.subdivision(0,1) []
>>> from sage.all import * >>> M = matrix(Integer(3), Integer(4), range(Integer(12))) >>> M.subdivide([Integer(0)],[Integer(0),Integer(2),Integer(2),Integer(4)]); M [+-----++-----+] [| 0 1|| 2 3|] [| 4 5|| 6 7|] [| 8 9||10 11|] >>> M.subdivision(Integer(0),Integer(0)) [] >>> M.subdivision(Integer(1),Integer(1)) [0 1] [4 5] [8 9] >>> M.subdivision(Integer(1),Integer(2)) [] >>> M.subdivision(Integer(1),Integer(0)) [] >>> M.subdivision(Integer(0),Integer(1)) []
M = matrix(3, 4, range(12)) M.subdivide([0],[0,2,2,4]); M M.subdivision(0,0) M.subdivision(1,1) M.subdivision(1,2) M.subdivision(1,0) M.subdivision(0,1)
- subdivision_entry(i, j, x, y)[source]¶
Return the x,y entry of the i,j submatrix of
self.EXAMPLES:
sage: M = matrix(5, 5, range(25)) sage: M.subdivide(3,3); M [ 0 1 2| 3 4] [ 5 6 7| 8 9] [10 11 12|13 14] [--------+-----] [15 16 17|18 19] [20 21 22|23 24] sage: M.subdivision_entry(0,0,1,2) 7 sage: M.subdivision(0,0)[1,2] 7 sage: M.subdivision_entry(0,1,0,0) 3 sage: M.subdivision_entry(1,0,0,0) 15 sage: M.subdivision_entry(1,1,1,1) 24
>>> from sage.all import * >>> M = matrix(Integer(5), Integer(5), range(Integer(25))) >>> M.subdivide(Integer(3),Integer(3)); M [ 0 1 2| 3 4] [ 5 6 7| 8 9] [10 11 12|13 14] [--------+-----] [15 16 17|18 19] [20 21 22|23 24] >>> M.subdivision_entry(Integer(0),Integer(0),Integer(1),Integer(2)) 7 >>> M.subdivision(Integer(0),Integer(0))[Integer(1),Integer(2)] 7 >>> M.subdivision_entry(Integer(0),Integer(1),Integer(0),Integer(0)) 3 >>> M.subdivision_entry(Integer(1),Integer(0),Integer(0),Integer(0)) 15 >>> M.subdivision_entry(Integer(1),Integer(1),Integer(1),Integer(1)) 24
M = matrix(5, 5, range(25)) M.subdivide(3,3); M M.subdivision_entry(0,0,1,2) M.subdivision(0,0)[1,2] M.subdivision_entry(0,1,0,0) M.subdivision_entry(1,0,0,0) M.subdivision_entry(1,1,1,1)
Even though this entry exists in the matrix, the index is invalid for the submatrix.
sage: M.subdivision_entry(0,0,4,0) Traceback (most recent call last): ... IndexError: Submatrix 0,0 has no entry 4,0
>>> from sage.all import * >>> M.subdivision_entry(Integer(0),Integer(0),Integer(4),Integer(0)) Traceback (most recent call last): ... IndexError: Submatrix 0,0 has no entry 4,0
M.subdivision_entry(0,0,4,0)
- subdivisions()[source]¶
Return the current subdivision of
self.EXAMPLES:
sage: M = matrix(5, 5, range(25)) sage: M.subdivisions() ([], []) sage: M.subdivide(2,3) sage: M.subdivisions() ([2], [3]) sage: N = M.parent()(1) sage: N.subdivide(M.subdivisions()); N [1 0 0|0 0] [0 1 0|0 0] [-----+---] [0 0 1|0 0] [0 0 0|1 0] [0 0 0|0 1]
>>> from sage.all import * >>> M = matrix(Integer(5), Integer(5), range(Integer(25))) >>> M.subdivisions() ([], []) >>> M.subdivide(Integer(2),Integer(3)) >>> M.subdivisions() ([2], [3]) >>> N = M.parent()(Integer(1)) >>> N.subdivide(M.subdivisions()); N [1 0 0|0 0] [0 1 0|0 0] [-----+---] [0 0 1|0 0] [0 0 0|1 0] [0 0 0|0 1]
M = matrix(5, 5, range(25)) M.subdivisions() M.subdivide(2,3) M.subdivisions() N = M.parent()(1) N.subdivide(M.subdivisions()); N
- subs(*args, **kwds)[source]¶
Substitute values to the variables in that matrix.
All the arguments are transmitted unchanged to the method
subsof the coefficients.EXAMPLES:
sage: # needs sage.symbolic sage: var('a,b,d,e') (a, b, d, e) sage: m = matrix([[a,b], [d,e]]) sage: m.substitute(a=1) [1 b] [d e] sage: m.subs(a=b, b=d) [b d] [d e] sage: m.subs({a: 3, b: 2, d: 1, e: -1}) [ 3 2] [ 1 -1]
>>> from sage.all import * >>> # needs sage.symbolic >>> var('a,b,d,e') (a, b, d, e) >>> m = matrix([[a,b], [d,e]]) >>> m.substitute(a=Integer(1)) [1 b] [d e] >>> m.subs(a=b, b=d) [b d] [d e] >>> m.subs({a: Integer(3), b: Integer(2), d: Integer(1), e: -Integer(1)}) [ 3 2] [ 1 -1]
# needs sage.symbolic var('a,b,d,e') m = matrix([[a,b], [d,e]]) m.substitute(a=1) m.subs(a=b, b=d) m.subs({a: 3, b: 2, d: 1, e: -1})The parent of the newly created matrix might be different from the initial one. It depends on what the method
.subsdoes on coefficients (see Issue #19045):sage: x = polygen(ZZ) sage: m = matrix([[x]]) sage: m2 = m.subs(x=2) sage: m2.parent() Full MatrixSpace of 1 by 1 dense matrices over Integer Ring sage: m1 = m.subs(x=RDF(1)) sage: m1.parent() Full MatrixSpace of 1 by 1 dense matrices over Real Double Field
>>> from sage.all import * >>> x = polygen(ZZ) >>> m = matrix([[x]]) >>> m2 = m.subs(x=Integer(2)) >>> m2.parent() Full MatrixSpace of 1 by 1 dense matrices over Integer Ring >>> m1 = m.subs(x=RDF(Integer(1))) >>> m1.parent() Full MatrixSpace of 1 by 1 dense matrices over Real Double Field
x = polygen(ZZ) m = matrix([[x]]) m2 = m.subs(x=2) m2.parent() m1 = m.subs(x=RDF(1)) m1.parent()
However, sparse matrices remain sparse:
sage: m = matrix({(3,2): -x, (59,38): x^2 + 2}, nrows=1000, ncols=1000) sage: m1 = m.subs(x=1) sage: m1.is_sparse() True
>>> from sage.all import * >>> m = matrix({(Integer(3),Integer(2)): -x, (Integer(59),Integer(38)): x**Integer(2) + Integer(2)}, nrows=Integer(1000), ncols=Integer(1000)) >>> m1 = m.subs(x=Integer(1)) >>> m1.is_sparse() True
m = matrix({(3,2): -x, (59,38): x^2 + 2}, nrows=1000, ncols=1000) m1 = m.subs(x=1) m1.is_sparse()
- symplectic_form()[source]¶
Find a symplectic form for
selfifselfis an anti-symmetric, alternating matrix defined over a field.Returns a pair (F, C) such that the rows of C form a symplectic basis for
selfandF = C \* self \* C.transpose().Raises a
ValueErrorif not over a field, orselfis not anti-symmetric, orselfis not alternating.Anti-symmetric means that \(M = -M^t\). Alternating means that the diagonal of \(M\) is identically zero.
A symplectic basis is a basis of the form \(e_1, \ldots, e_j, f_1, \ldots f_j, z_1, \dots, z_k\) such that
\(z_i M v^t\) = 0 for all vectors \(v\)
\(e_i M {e_j}^t = 0\) for all \(i, j\)
\(f_i M {f_j}^t = 0\) for all \(i, j\)
\(e_i M {f_i}^t = 1\) for all \(i\)
\(e_i M {f_j}^t = 0\) for all \(i\) not equal \(j\).
See the example for a pictorial description of such a basis.
EXAMPLES:
sage: E = matrix(QQ, 8, 8, [0, -1/2, -2, 1/2, 2, 0, -2, 1, 1/2, 0, -1, -3, 0, 2, 5/2, -3, 2, 1, 0, 3/2, -1, 0, -1, -2, -1/2, 3, -3/2, 0, 1, 3/2, -1/2, -1/2, -2, 0, 1, -1, 0, 0, 1, -1, 0, -2, 0, -3/2, 0, 0, 1/2, -2, 2, -5/2, 1, 1/2, -1, -1/2, 0, -1, -1, 3, 2, 1/2, 1, 2, 1, 0]); E [ 0 -1/2 -2 1/2 2 0 -2 1] [ 1/2 0 -1 -3 0 2 5/2 -3] [ 2 1 0 3/2 -1 0 -1 -2] [-1/2 3 -3/2 0 1 3/2 -1/2 -1/2] [ -2 0 1 -1 0 0 1 -1] [ 0 -2 0 -3/2 0 0 1/2 -2] [ 2 -5/2 1 1/2 -1 -1/2 0 -1] [ -1 3 2 1/2 1 2 1 0] sage: F, C = E.symplectic_form(); F [ 0 0 0 0 1 0 0 0] [ 0 0 0 0 0 1 0 0] [ 0 0 0 0 0 0 1 0] [ 0 0 0 0 0 0 0 1] [-1 0 0 0 0 0 0 0] [ 0 -1 0 0 0 0 0 0] [ 0 0 -1 0 0 0 0 0] [ 0 0 0 -1 0 0 0 0] sage: F == C * E * C.transpose() True
>>> from sage.all import * >>> E = matrix(QQ, Integer(8), Integer(8), [Integer(0), -Integer(1)/Integer(2), -Integer(2), Integer(1)/Integer(2), Integer(2), Integer(0), -Integer(2), Integer(1), Integer(1)/Integer(2), Integer(0), -Integer(1), -Integer(3), Integer(0), Integer(2), Integer(5)/Integer(2), -Integer(3), Integer(2), Integer(1), Integer(0), Integer(3)/Integer(2), -Integer(1), Integer(0), -Integer(1), -Integer(2), -Integer(1)/Integer(2), Integer(3), -Integer(3)/Integer(2), Integer(0), Integer(1), Integer(3)/Integer(2), -Integer(1)/Integer(2), -Integer(1)/Integer(2), -Integer(2), Integer(0), Integer(1), -Integer(1), Integer(0), Integer(0), Integer(1), -Integer(1), Integer(0), -Integer(2), Integer(0), -Integer(3)/Integer(2), Integer(0), Integer(0), Integer(1)/Integer(2), -Integer(2), Integer(2), -Integer(5)/Integer(2), Integer(1), Integer(1)/Integer(2), -Integer(1), -Integer(1)/Integer(2), Integer(0), -Integer(1), -Integer(1), Integer(3), Integer(2), Integer(1)/Integer(2), Integer(1), Integer(2), Integer(1), Integer(0)]); E [ 0 -1/2 -2 1/2 2 0 -2 1] [ 1/2 0 -1 -3 0 2 5/2 -3] [ 2 1 0 3/2 -1 0 -1 -2] [-1/2 3 -3/2 0 1 3/2 -1/2 -1/2] [ -2 0 1 -1 0 0 1 -1] [ 0 -2 0 -3/2 0 0 1/2 -2] [ 2 -5/2 1 1/2 -1 -1/2 0 -1] [ -1 3 2 1/2 1 2 1 0] >>> F, C = E.symplectic_form(); F [ 0 0 0 0 1 0 0 0] [ 0 0 0 0 0 1 0 0] [ 0 0 0 0 0 0 1 0] [ 0 0 0 0 0 0 0 1] [-1 0 0 0 0 0 0 0] [ 0 -1 0 0 0 0 0 0] [ 0 0 -1 0 0 0 0 0] [ 0 0 0 -1 0 0 0 0] >>> F == C * E * C.transpose() True
E = matrix(QQ, 8, 8, [0, -1/2, -2, 1/2, 2, 0, -2, 1, 1/2, 0, -1, -3, 0, 2, 5/2, -3, 2, 1, 0, 3/2, -1, 0, -1, -2, -1/2, 3, -3/2, 0, 1, 3/2, -1/2, -1/2, -2, 0, 1, -1, 0, 0, 1, -1, 0, -2, 0, -3/2, 0, 0, 1/2, -2, 2, -5/2, 1, 1/2, -1, -1/2, 0, -1, -1, 3, 2, 1/2, 1, 2, 1, 0]); E F, C = E.symplectic_form(); F F == C * E * C.transpose()
- tensor_product(A, subdivide=True)[source]¶
Return the tensor product of two matrices.
INPUT:
A– a matrixsubdivide– (default:True) whether or not to return natural subdivisions with the matrix
OUTPUT:
Replace each element of
selfby a copy ofA, but first create a scalar multiple ofAby the element it replaces. So ifselfis an \(m\times n\) matrix andAis a \(p\times q\) matrix, then the tensor product is an \(mp\times nq\) matrix. By default, the matrix will be subdivided into submatrices of size \(p\times q\).EXAMPLES:
sage: M1=Matrix(QQ,[[-1,0],[-1/2,-1]]) sage: M2=Matrix(ZZ,[[1,-1,2],[-2,4,8]]) sage: M1.tensor_product(M2) [ -1 1 -2| 0 0 0] [ 2 -4 -8| 0 0 0] [--------------+--------------] [-1/2 1/2 -1| -1 1 -2] [ 1 -2 -4| 2 -4 -8] sage: M2.tensor_product(M1) [ -1 0| 1 0| -2 0] [-1/2 -1| 1/2 1| -1 -2] [---------+---------+---------] [ 2 0| -4 0| -8 0] [ 1 2| -2 -4| -4 -8]
>>> from sage.all import * >>> M1=Matrix(QQ,[[-Integer(1),Integer(0)],[-Integer(1)/Integer(2),-Integer(1)]]) >>> M2=Matrix(ZZ,[[Integer(1),-Integer(1),Integer(2)],[-Integer(2),Integer(4),Integer(8)]]) >>> M1.tensor_product(M2) [ -1 1 -2| 0 0 0] [ 2 -4 -8| 0 0 0] [--------------+--------------] [-1/2 1/2 -1| -1 1 -2] [ 1 -2 -4| 2 -4 -8] >>> M2.tensor_product(M1) [ -1 0| 1 0| -2 0] [-1/2 -1| 1/2 1| -1 -2] [---------+---------+---------] [ 2 0| -4 0| -8 0] [ 1 2| -2 -4| -4 -8]
M1=Matrix(QQ,[[-1,0],[-1/2,-1]]) M2=Matrix(ZZ,[[1,-1,2],[-2,4,8]]) M1.tensor_product(M2) M2.tensor_product(M1)
Subdivisions can be optionally suppressed.
sage: M1.tensor_product(M2, subdivide=False) [ -1 1 -2 0 0 0] [ 2 -4 -8 0 0 0] [-1/2 1/2 -1 -1 1 -2] [ 1 -2 -4 2 -4 -8]
>>> from sage.all import * >>> M1.tensor_product(M2, subdivide=False) [ -1 1 -2 0 0 0] [ 2 -4 -8 0 0 0] [-1/2 1/2 -1 -1 1 -2] [ 1 -2 -4 2 -4 -8]
M1.tensor_product(M2, subdivide=False)
Different base rings are handled sensibly.
sage: A = matrix(ZZ, 2, 3, range(6)) sage: B = matrix(FiniteField(23), 3, 4, range(12)) sage: C = matrix(FiniteField(29), 4, 5, range(20)) sage: D = A.tensor_product(B) sage: D.parent() Full MatrixSpace of 6 by 12 dense matrices over Finite Field of size 23 sage: E = C.tensor_product(B) Traceback (most recent call last): ... TypeError: unsupported operand parent(s) for *: 'Finite Field of size 29' and 'Full MatrixSpace of 3 by 4 dense matrices over Finite Field of size 23'
>>> from sage.all import * >>> A = matrix(ZZ, Integer(2), Integer(3), range(Integer(6))) >>> B = matrix(FiniteField(Integer(23)), Integer(3), Integer(4), range(Integer(12))) >>> C = matrix(FiniteField(Integer(29)), Integer(4), Integer(5), range(Integer(20))) >>> D = A.tensor_product(B) >>> D.parent() Full MatrixSpace of 6 by 12 dense matrices over Finite Field of size 23 >>> E = C.tensor_product(B) Traceback (most recent call last): ... TypeError: unsupported operand parent(s) for *: 'Finite Field of size 29' and 'Full MatrixSpace of 3 by 4 dense matrices over Finite Field of size 23'
A = matrix(ZZ, 2, 3, range(6)) B = matrix(FiniteField(23), 3, 4, range(12)) C = matrix(FiniteField(29), 4, 5, range(20)) D = A.tensor_product(B) D.parent() E = C.tensor_product(B)
The input is checked to be sure it is a matrix.
sage: A = matrix(QQ, 2, 2, range(4)) sage: A.tensor_product('junk') Traceback (most recent call last): ... TypeError: tensor product requires a second matrix, not junk
>>> from sage.all import * >>> A = matrix(QQ, Integer(2), Integer(2), range(Integer(4))) >>> A.tensor_product('junk') Traceback (most recent call last): ... TypeError: tensor product requires a second matrix, not junk
A = matrix(QQ, 2, 2, range(4)) A.tensor_product('junk')
- trace()[source]¶
Return the trace of self, which is the sum of the diagonal entries of
self.INPUT:
self– a square matrix
OUTPUT: element of the base ring of self
EXAMPLES:
sage: a = matrix(3, 3, range(9)); a [0 1 2] [3 4 5] [6 7 8] sage: a.trace() 12 sage: a = matrix({(1,1): 10, (2,1): -3, (2,2): 4/3}); a [ 0 0 0] [ 0 10 0] [ 0 -3 4/3] sage: a.trace() 34/3
>>> from sage.all import * >>> a = matrix(Integer(3), Integer(3), range(Integer(9))); a [0 1 2] [3 4 5] [6 7 8] >>> a.trace() 12 >>> a = matrix({(Integer(1),Integer(1)): Integer(10), (Integer(2),Integer(1)): -Integer(3), (Integer(2),Integer(2)): Integer(4)/Integer(3)}); a [ 0 0 0] [ 0 10 0] [ 0 -3 4/3] >>> a.trace() 34/3
a = matrix(3, 3, range(9)); a a.trace() a = matrix({(1,1): 10, (2,1): -3, (2,2): 4/3}); a a.trace()
- trace_of_product(other)[source]¶
Return the trace of
self * otherwithout computing the entire product.EXAMPLES:
sage: M = random_matrix(ZZ, 10, 20) sage: N = random_matrix(ZZ, 20, 10) sage: M.trace_of_product(N) == (M*N).trace() True
>>> from sage.all import * >>> M = random_matrix(ZZ, Integer(10), Integer(20)) >>> N = random_matrix(ZZ, Integer(20), Integer(10)) >>> M.trace_of_product(N) == (M*N).trace() True
M = random_matrix(ZZ, 10, 20) N = random_matrix(ZZ, 20, 10) M.trace_of_product(N) == (M*N).trace()
- visualize_structure(maxsize=512)[source]¶
Visualize the nonzero entries.
White pixels are put at positions with zero entries. If ‘maxsize’ is given, then the maximal dimension in either x or y direction is set to ‘maxsize’ depending on which is bigger. If the image is scaled, the darkness of the pixel reflects how many of the represented entries are nonzero. So if e.g. one image pixel actually represents a 2x2 submatrix, the dot is darker the more of the four values are nonzero.
INPUT:
maxsize– integer (default: \(512\)); maximal dimension in either x or y direction of the resulting image. IfNoneor a maxsize larger thanmax(self.nrows(),self.ncols())is given the image will have the same pixelsize as the matrix dimensions.
OUTPUT:
Bitmap image as an instance of
Image.EXAMPLES:
sage: # needs sage.rings.real_mpfr sage: M = random_matrix(CC, 5, 7) sage: for i in range(5): M[i,i] = 0 sage: M[4, 0] = M[0, 6] = M[4, 6] = 0 sage: img = M.visualize_structure(); img # needs pillow 7x5px 24-bit RGB image
>>> from sage.all import * >>> # needs sage.rings.real_mpfr >>> M = random_matrix(CC, Integer(5), Integer(7)) >>> for i in range(Integer(5)): M[i,i] = Integer(0) >>> M[Integer(4), Integer(0)] = M[Integer(0), Integer(6)] = M[Integer(4), Integer(6)] = Integer(0) >>> img = M.visualize_structure(); img # needs pillow 7x5px 24-bit RGB image
# needs sage.rings.real_mpfr M = random_matrix(CC, 5, 7) for i in range(5): M[i,i] = 0 M[4, 0] = M[0, 6] = M[4, 6] = 0 img = M.visualize_structure(); img # needs pillow
You can use
save()to save the resulting image:sage: # needs pillow sage.rings.real_mpfr sage: filename = tmp_filename(ext='.png') sage: img.save(filename) sage: with open(filename, 'rb') as fobj: ....: fobj.read().startswith(b'\x89PNG') True
>>> from sage.all import * >>> # needs pillow sage.rings.real_mpfr >>> filename = tmp_filename(ext='.png') >>> img.save(filename) >>> with open(filename, 'rb') as fobj: ... fobj.read().startswith(b'\x89PNG') True
# needs pillow sage.rings.real_mpfr filename = tmp_filename(ext='.png') img.save(filename) with open(filename, 'rb') as fobj: fobj.read().startswith(b'\x89PNG')
- wiedemann(i, t=0)[source]¶
Application of Wiedemann’s algorithm to the \(i\)-th standard basis vector.
INPUT:
i– integert– integer (default: 0); if t is nonzero, use only the first t linear recurrence relations
IMPLEMENTATION: This is a toy implementation.
EXAMPLES:
sage: t = matrix(QQ, 3, 3, range(9)); t [0 1 2] [3 4 5] [6 7 8] sage: t.wiedemann(0) x^2 - 12*x - 18 sage: t.charpoly() # needs sage.libs.pari x^3 - 12*x^2 - 18*x
>>> from sage.all import * >>> t = matrix(QQ, Integer(3), Integer(3), range(Integer(9))); t [0 1 2] [3 4 5] [6 7 8] >>> t.wiedemann(Integer(0)) x^2 - 12*x - 18 >>> t.charpoly() # needs sage.libs.pari x^3 - 12*x^2 - 18*x
t = matrix(QQ, 3, 3, range(9)); t t.wiedemann(0) t.charpoly() # needs sage.libs.pari
- zigzag_form(subdivide=True, transformation=False)[source]¶
Find a matrix in ZigZag form that is similar to
self.INPUT:
self– a square matrix with entries from an exact fieldtransformation– (default:False) ifTruereturn a change-of-basis matrix relating the matrix and its ZigZag formsubdivide– (default:True) ifTruethe ZigZag form matrix is subdivided according to the companion matrices described in the output section below.
OUTPUT:
A matrix in ZigZag form has blocks on the main diagonal that are companion matrices. The first companion matrix has ones just below the main diagonal. The last column has the negatives of coefficients of a monic polynomial, but not the leading one. Low degree monomials have their coefficients in the earlier rows. The second companion matrix is like the first only transposed. The third is like the first. The fourth is like the second. And so on.
These blocks on the main diagonal define blocks just off the diagonal. To the right of the first companion matrix, and above the second companion matrix is a block that is totally zero, except the entry of the first row and first column may be a one. Below the second block and to the left of the third block is a block that is totally zero, except the entry of the first row and first column may be one. This alternating pattern continues. It may now be apparent how this form gets its name. Any other entry of the matrix is zero. So this form is reminiscent of rational canonical form and is a good precursor to that form.
If
transformationisTrue, then the output is a pair of matrices. The first is the formZand the second is an invertible matrixUsuch thatU.inverse()*self*UequalsZ. In other words, the representation ofselfwith respect to the columns ofUwill beZ.If subdivide is
Truethen the matrix returned as the form is partitioned according to the companion matrices and these may be manipulated by several different matrix methods.For output that may be more useful as input to other routines, see the helper method
_zigzag_form().Note
An effort has been made to optimize computation of the form, but no such work has been done for the computation of the transformation matrix, so for fastest results do not request the transformation matrix.
ALGORITHM:
ZigZag form, and its computation, are due to Arne Storjohann and are described in [Sto2000] and [Sto1998], where the former is more representative of the code here.
EXAMPLES:
Two examples that illustrate ZigZag form well. Notice that this is not a canonical form. The two matrices below are similar, since they have equal Jordan canonical forms, yet their ZigZag forms are quite different. In other words, while the computation of the form is deterministic, the final result, when viewed as a property of a linear transformation, is dependent on the basis used for the matrix representation.
sage: A = matrix(QQ, [[-68, 69, -27, -11, -65, 9, -181, -32], ....: [-52, 52, -27, -8, -52, -16, -133, -14], ....: [ 92, -97, 47, 14, 90, 32, 241, 18], ....: [139, -144, 60, 18, 148, -10, 362, 77], ....: [ 40, -41, 12, 6, 45, -24, 105, 42], ....: [-46, 48, -20, -7, -47, 0, -122, -22], ....: [-26, 27, -13, -4, -29, -6, -66, -14], ....: [-33, 34, -13, -5, -35, 7, -87, -23]]) sage: Z, U = A.zigzag_form(transformation=True) sage: Z [ 0 0 0 40| 1 0| 0 0] [ 1 0 0 52| 0 0| 0 0] [ 0 1 0 18| 0 0| 0 0] [ 0 0 1 -1| 0 0| 0 0] [---------------+-------+-------] [ 0 0 0 0| 0 1| 0 0] [ 0 0 0 0|-25 10| 0 0] [---------------+-------+-------] [ 0 0 0 0| 1 0| 0 -4] [ 0 0 0 0| 0 0| 1 -4] sage: U.inverse()*A*U == Z True sage: B = matrix(QQ, [[ 16, 69, -13, 2, -52, 143, 90, -3], ....: [ 26, 54, 6, -5, -28, 73, 73, -48], ....: [-16, -79, 12, -10, 64, -142, -115, 41], ....: [ 27, -7, 21, -33, 39, -20, -42, 43], ....: [ 8, -75, 34, -32, 86, -156, -130, 42], ....: [ 2, -17, 7, -8, 20, -33, -31, 16], ....: [-24, -80, 7, -3, 56, -136, -112, 42], ....: [ -6, -19, 0, -1, 13, -28, -27, 15]]) sage: Z, U = B.zigzag_form(transformation=True) sage: Z [ 0 0 0 0 0 1000| 0| 0] [ 1 0 0 0 0 900| 0| 0] [ 0 1 0 0 0 -30| 0| 0] [ 0 0 1 0 0 -153| 0| 0] [ 0 0 0 1 0 3| 0| 0] [ 0 0 0 0 1 9| 0| 0] [-----------------------------+----+----] [ 0 0 0 0 0 0| -2| 0] [-----------------------------+----+----] [ 0 0 0 0 0 0| 1| -2] sage: U.inverse()*B*U == Z True sage: A.jordan_form() == B.jordan_form() # needs sage.combinat sage.libs.pari True
>>> from sage.all import * >>> A = matrix(QQ, [[-Integer(68), Integer(69), -Integer(27), -Integer(11), -Integer(65), Integer(9), -Integer(181), -Integer(32)], ... [-Integer(52), Integer(52), -Integer(27), -Integer(8), -Integer(52), -Integer(16), -Integer(133), -Integer(14)], ... [ Integer(92), -Integer(97), Integer(47), Integer(14), Integer(90), Integer(32), Integer(241), Integer(18)], ... [Integer(139), -Integer(144), Integer(60), Integer(18), Integer(148), -Integer(10), Integer(362), Integer(77)], ... [ Integer(40), -Integer(41), Integer(12), Integer(6), Integer(45), -Integer(24), Integer(105), Integer(42)], ... [-Integer(46), Integer(48), -Integer(20), -Integer(7), -Integer(47), Integer(0), -Integer(122), -Integer(22)], ... [-Integer(26), Integer(27), -Integer(13), -Integer(4), -Integer(29), -Integer(6), -Integer(66), -Integer(14)], ... [-Integer(33), Integer(34), -Integer(13), -Integer(5), -Integer(35), Integer(7), -Integer(87), -Integer(23)]]) >>> Z, U = A.zigzag_form(transformation=True) >>> Z [ 0 0 0 40| 1 0| 0 0] [ 1 0 0 52| 0 0| 0 0] [ 0 1 0 18| 0 0| 0 0] [ 0 0 1 -1| 0 0| 0 0] [---------------+-------+-------] [ 0 0 0 0| 0 1| 0 0] [ 0 0 0 0|-25 10| 0 0] [---------------+-------+-------] [ 0 0 0 0| 1 0| 0 -4] [ 0 0 0 0| 0 0| 1 -4] >>> U.inverse()*A*U == Z True >>> B = matrix(QQ, [[ Integer(16), Integer(69), -Integer(13), Integer(2), -Integer(52), Integer(143), Integer(90), -Integer(3)], ... [ Integer(26), Integer(54), Integer(6), -Integer(5), -Integer(28), Integer(73), Integer(73), -Integer(48)], ... [-Integer(16), -Integer(79), Integer(12), -Integer(10), Integer(64), -Integer(142), -Integer(115), Integer(41)], ... [ Integer(27), -Integer(7), Integer(21), -Integer(33), Integer(39), -Integer(20), -Integer(42), Integer(43)], ... [ Integer(8), -Integer(75), Integer(34), -Integer(32), Integer(86), -Integer(156), -Integer(130), Integer(42)], ... [ Integer(2), -Integer(17), Integer(7), -Integer(8), Integer(20), -Integer(33), -Integer(31), Integer(16)], ... [-Integer(24), -Integer(80), Integer(7), -Integer(3), Integer(56), -Integer(136), -Integer(112), Integer(42)], ... [ -Integer(6), -Integer(19), Integer(0), -Integer(1), Integer(13), -Integer(28), -Integer(27), Integer(15)]]) >>> Z, U = B.zigzag_form(transformation=True) >>> Z [ 0 0 0 0 0 1000| 0| 0] [ 1 0 0 0 0 900| 0| 0] [ 0 1 0 0 0 -30| 0| 0] [ 0 0 1 0 0 -153| 0| 0] [ 0 0 0 1 0 3| 0| 0] [ 0 0 0 0 1 9| 0| 0] [-----------------------------+----+----] [ 0 0 0 0 0 0| -2| 0] [-----------------------------+----+----] [ 0 0 0 0 0 0| 1| -2] >>> U.inverse()*B*U == Z True >>> A.jordan_form() == B.jordan_form() # needs sage.combinat sage.libs.pari True
A = matrix(QQ, [[-68, 69, -27, -11, -65, 9, -181, -32], [-52, 52, -27, -8, -52, -16, -133, -14], [ 92, -97, 47, 14, 90, 32, 241, 18], [139, -144, 60, 18, 148, -10, 362, 77], [ 40, -41, 12, 6, 45, -24, 105, 42], [-46, 48, -20, -7, -47, 0, -122, -22], [-26, 27, -13, -4, -29, -6, -66, -14], [-33, 34, -13, -5, -35, 7, -87, -23]]) Z, U = A.zigzag_form(transformation=True) Z U.inverse()*A*U == Z B = matrix(QQ, [[ 16, 69, -13, 2, -52, 143, 90, -3], [ 26, 54, 6, -5, -28, 73, 73, -48], [-16, -79, 12, -10, 64, -142, -115, 41], [ 27, -7, 21, -33, 39, -20, -42, 43], [ 8, -75, 34, -32, 86, -156, -130, 42], [ 2, -17, 7, -8, 20, -33, -31, 16], [-24, -80, 7, -3, 56, -136, -112, 42], [ -6, -19, 0, -1, 13, -28, -27, 15]]) Z, U = B.zigzag_form(transformation=True) Z U.inverse()*B*U == Z A.jordan_form() == B.jordan_form() # needs sage.combinat sage.libs.pariTwo more examples, illustrating the two extremes of the zig-zag nature of this form. The first has a one in each of the off-diagonal blocks, the second has all zeros in each off-diagonal block. Notice again that the two matrices are similar, since their Jordan canonical forms are equal.
sage: C = matrix(QQ, [[2, 31, -10, -9, -125, 13, 62, -12], ....: [0, 48, -16, -16, -188, 20, 92, -16], ....: [0, 9, -1, 2, -33, 5, 18, 0], ....: [0, 15, -5, 0, -59, 7, 30, -4], ....: [0, -21, 7, 2, 84, -10, -42, 5], ....: [0, -42, 14, 8, 167, -17, -84, 13], ....: [0, -50, 17, 10, 199, -23, -98, 14], ....: [0, 15, -5, -2, -59, 7, 30, -2]]) sage: Z, U = C.zigzag_form(transformation=True) sage: Z [2|1|0|0|0|0|0|0] [-+-+-+-+-+-+-+-] [0|2|0|0|0|0|0|0] [-+-+-+-+-+-+-+-] [0|1|2|1|0|0|0|0] [-+-+-+-+-+-+-+-] [0|0|0|2|0|0|0|0] [-+-+-+-+-+-+-+-] [0|0|0|1|2|1|0|0] [-+-+-+-+-+-+-+-] [0|0|0|0|0|2|0|0] [-+-+-+-+-+-+-+-] [0|0|0|0|0|1|2|1] [-+-+-+-+-+-+-+-] [0|0|0|0|0|0|0|2] sage: U.inverse()*C*U == Z True sage: D = matrix(QQ, [[ -4, 3, 7, 2, -4, 5, 7, -3], ....: [ -6, 5, 7, 2, -4, 5, 7, -3], ....: [ 21, -12, 89, 25, 8, 27, 98, -95], ....: [ -9, 5, -44, -11, -3, -13, -48, 47], ....: [ 23, -13, 74, 21, 12, 22, 85, -84], ....: [ 31, -18, 135, 38, 12, 47, 155, -147], ....: [-33, 19, -138, -39, -13, -45, -156, 151], ....: [ -7, 4, -29, -8, -3, -10, -34, 34]]) sage: Z, U = D.zigzag_form(transformation=True) sage: Z [ 0 -4| 0 0| 0 0| 0 0] [ 1 4| 0 0| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 1| 0 0| 0 0] [ 0 0|-4 4| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 -4| 0 0] [ 0 0| 0 0| 1 4| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 0| 0 1] [ 0 0| 0 0| 0 0|-4 4] sage: U.inverse()*D*U == Z True sage: C.jordan_form() == D.jordan_form() # needs sage.combinat sage.libs.pari True
>>> from sage.all import * >>> C = matrix(QQ, [[Integer(2), Integer(31), -Integer(10), -Integer(9), -Integer(125), Integer(13), Integer(62), -Integer(12)], ... [Integer(0), Integer(48), -Integer(16), -Integer(16), -Integer(188), Integer(20), Integer(92), -Integer(16)], ... [Integer(0), Integer(9), -Integer(1), Integer(2), -Integer(33), Integer(5), Integer(18), Integer(0)], ... [Integer(0), Integer(15), -Integer(5), Integer(0), -Integer(59), Integer(7), Integer(30), -Integer(4)], ... [Integer(0), -Integer(21), Integer(7), Integer(2), Integer(84), -Integer(10), -Integer(42), Integer(5)], ... [Integer(0), -Integer(42), Integer(14), Integer(8), Integer(167), -Integer(17), -Integer(84), Integer(13)], ... [Integer(0), -Integer(50), Integer(17), Integer(10), Integer(199), -Integer(23), -Integer(98), Integer(14)], ... [Integer(0), Integer(15), -Integer(5), -Integer(2), -Integer(59), Integer(7), Integer(30), -Integer(2)]]) >>> Z, U = C.zigzag_form(transformation=True) >>> Z [2|1|0|0|0|0|0|0] [-+-+-+-+-+-+-+-] [0|2|0|0|0|0|0|0] [-+-+-+-+-+-+-+-] [0|1|2|1|0|0|0|0] [-+-+-+-+-+-+-+-] [0|0|0|2|0|0|0|0] [-+-+-+-+-+-+-+-] [0|0|0|1|2|1|0|0] [-+-+-+-+-+-+-+-] [0|0|0|0|0|2|0|0] [-+-+-+-+-+-+-+-] [0|0|0|0|0|1|2|1] [-+-+-+-+-+-+-+-] [0|0|0|0|0|0|0|2] >>> U.inverse()*C*U == Z True >>> D = matrix(QQ, [[ -Integer(4), Integer(3), Integer(7), Integer(2), -Integer(4), Integer(5), Integer(7), -Integer(3)], ... [ -Integer(6), Integer(5), Integer(7), Integer(2), -Integer(4), Integer(5), Integer(7), -Integer(3)], ... [ Integer(21), -Integer(12), Integer(89), Integer(25), Integer(8), Integer(27), Integer(98), -Integer(95)], ... [ -Integer(9), Integer(5), -Integer(44), -Integer(11), -Integer(3), -Integer(13), -Integer(48), Integer(47)], ... [ Integer(23), -Integer(13), Integer(74), Integer(21), Integer(12), Integer(22), Integer(85), -Integer(84)], ... [ Integer(31), -Integer(18), Integer(135), Integer(38), Integer(12), Integer(47), Integer(155), -Integer(147)], ... [-Integer(33), Integer(19), -Integer(138), -Integer(39), -Integer(13), -Integer(45), -Integer(156), Integer(151)], ... [ -Integer(7), Integer(4), -Integer(29), -Integer(8), -Integer(3), -Integer(10), -Integer(34), Integer(34)]]) >>> Z, U = D.zigzag_form(transformation=True) >>> Z [ 0 -4| 0 0| 0 0| 0 0] [ 1 4| 0 0| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 1| 0 0| 0 0] [ 0 0|-4 4| 0 0| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 -4| 0 0] [ 0 0| 0 0| 1 4| 0 0] [-----+-----+-----+-----] [ 0 0| 0 0| 0 0| 0 1] [ 0 0| 0 0| 0 0|-4 4] >>> U.inverse()*D*U == Z True >>> C.jordan_form() == D.jordan_form() # needs sage.combinat sage.libs.pari True
C = matrix(QQ, [[2, 31, -10, -9, -125, 13, 62, -12], [0, 48, -16, -16, -188, 20, 92, -16], [0, 9, -1, 2, -33, 5, 18, 0], [0, 15, -5, 0, -59, 7, 30, -4], [0, -21, 7, 2, 84, -10, -42, 5], [0, -42, 14, 8, 167, -17, -84, 13], [0, -50, 17, 10, 199, -23, -98, 14], [0, 15, -5, -2, -59, 7, 30, -2]]) Z, U = C.zigzag_form(transformation=True) Z U.inverse()*C*U == Z D = matrix(QQ, [[ -4, 3, 7, 2, -4, 5, 7, -3], [ -6, 5, 7, 2, -4, 5, 7, -3], [ 21, -12, 89, 25, 8, 27, 98, -95], [ -9, 5, -44, -11, -3, -13, -48, 47], [ 23, -13, 74, 21, 12, 22, 85, -84], [ 31, -18, 135, 38, 12, 47, 155, -147], [-33, 19, -138, -39, -13, -45, -156, 151], [ -7, 4, -29, -8, -3, -10, -34, 34]]) Z, U = D.zigzag_form(transformation=True) Z U.inverse()*D*U == Z C.jordan_form() == D.jordan_form() # needs sage.combinat sage.libs.pariZigZag form is achieved entirely with the operations of the field, so while the eigenvalues may lie outside the field, this does not impede the computation of the form.
sage: # needs sage.rings.finite_rings sage: F.<a> = GF(5^4) sage: A = matrix(F, [[ a, 0, 0, a + 3], ....: [ 0,a^2 + 1, 0, 0], ....: [ 0, 0,a^3, 0], ....: [a^2 +4 , 0, 0,a + 2]]) sage: A.zigzag_form() [ 0 a^3 + 2*a^2 + 2*a + 2| 0| 0] [ 1 2*a + 2| 0| 0] [-------------------------------------------+---------------------+---------------------] [ 0 0| a^3| 0] [-------------------------------------------+---------------------+---------------------] [ 0 0| 0| a^2 + 1] sage: A.eigenvalues() Traceback (most recent call last): ... TypeError: no canonical coercion from Finite Field in a of size 5^4 to Finite Field in z4 of size 5^4
>>> from sage.all import * >>> # needs sage.rings.finite_rings >>> F = GF(Integer(5)**Integer(4), names=('a',)); (a,) = F._first_ngens(1) >>> A = matrix(F, [[ a, Integer(0), Integer(0), a + Integer(3)], ... [ Integer(0),a**Integer(2) + Integer(1), Integer(0), Integer(0)], ... [ Integer(0), Integer(0),a**Integer(3), Integer(0)], ... [a**Integer(2) +Integer(4) , Integer(0), Integer(0),a + Integer(2)]]) >>> A.zigzag_form() [ 0 a^3 + 2*a^2 + 2*a + 2| 0| 0] [ 1 2*a + 2| 0| 0] [-------------------------------------------+---------------------+---------------------] [ 0 0| a^3| 0] [-------------------------------------------+---------------------+---------------------] [ 0 0| 0| a^2 + 1] >>> A.eigenvalues() Traceback (most recent call last): ... TypeError: no canonical coercion from Finite Field in a of size 5^4 to Finite Field in z4 of size 5^4
# needs sage.rings.finite_rings F.<a> = GF(5^4) A = matrix(F, [[ a, 0, 0, a + 3], [ 0,a^2 + 1, 0, 0], [ 0, 0,a^3, 0], [a^2 +4 , 0, 0,a + 2]]) A.zigzag_form() A.eigenvalues()Subdivisions are optional.
sage: F.<a> = GF(5^4) # needs sage.rings.finite_rings sage: A = matrix(F, [[ a, 0, 0, a + 3], # needs sage.rings.finite_rings ....: [ 0,a^2 + 1, 0, 0], ....: [ 0, 0,a^3, 0], ....: [a^2 +4 , 0, 0,a + 2]]) sage: A.zigzag_form(subdivide=False) # needs sage.rings.finite_rings [ 0 a^3 + 2*a^2 + 2*a + 2 0 0] [ 1 2*a + 2 0 0] [ 0 0 a^3 0] [ 0 0 0 a^2 + 1]
>>> from sage.all import * >>> F = GF(Integer(5)**Integer(4), names=('a',)); (a,) = F._first_ngens(1)# needs sage.rings.finite_rings >>> A = matrix(F, [[ a, Integer(0), Integer(0), a + Integer(3)], # needs sage.rings.finite_rings ... [ Integer(0),a**Integer(2) + Integer(1), Integer(0), Integer(0)], ... [ Integer(0), Integer(0),a**Integer(3), Integer(0)], ... [a**Integer(2) +Integer(4) , Integer(0), Integer(0),a + Integer(2)]]) >>> A.zigzag_form(subdivide=False) # needs sage.rings.finite_rings [ 0 a^3 + 2*a^2 + 2*a + 2 0 0] [ 1 2*a + 2 0 0] [ 0 0 a^3 0] [ 0 0 0 a^2 + 1]
F.<a> = GF(5^4) # needs sage.rings.finite_rings A = matrix(F, [[ a, 0, 0, a + 3], # needs sage.rings.finite_rings [ 0,a^2 + 1, 0, 0], [ 0, 0,a^3, 0], [a^2 +4 , 0, 0,a + 2]]) A.zigzag_form(subdivide=False) # needs sage.rings.finite_rings
- exception sage.matrix.matrix2.NotFullRankError[source]¶
Bases:
ValueErrorAn error that indicates that a matrix is not of full rank.
The fact that a square system is rank-deficient sometimes only becomes apparent while attempting to solve it. The methods
Matrix.solve_left()andMatrix.solve_right()defer toMatrix._solve_right_nonsingular_square()for square systems, and that method raises this error if the system turns out to be singular.
- sage.matrix.matrix2.decomp_seq(v)[source]¶
This function is used internally be the decomposition matrix method. It takes a list of tuples and produces a sequence that is correctly sorted and prints with carriage returns.
EXAMPLES:
sage: from sage.matrix.matrix2 import decomp_seq sage: V = [(QQ^3, 2), (QQ^2, 1)] sage: decomp_seq(V) [ (Vector space of dimension 2 over Rational Field, 1), (Vector space of dimension 3 over Rational Field, 2) ]
>>> from sage.all import * >>> from sage.matrix.matrix2 import decomp_seq >>> V = [(QQ**Integer(3), Integer(2)), (QQ**Integer(2), Integer(1))] >>> decomp_seq(V) [ (Vector space of dimension 2 over Rational Field, 1), (Vector space of dimension 3 over Rational Field, 2) ]
from sage.matrix.matrix2 import decomp_seq V = [(QQ^3, 2), (QQ^2, 1)] decomp_seq(V)