2D plotting¶

Sage provides extensive 2D plotting functionality. The underlying rendering is done using the matplotlib Python library.

The following graphics primitives are supported:

arrow() – an arrow from a min point to a max point
circle() – a circle with given radius
ellipse() – an ellipse with given radii and angle
arc() – an arc of a circle or an ellipse
disk() – a filled disk (i.e. a sector or wedge of a circle)
line() – a line determined by a sequence of points (this need not be straight!)
point() – a point
text() – some text
polygon() – a filled polygon

The following plotting functions are supported:

plot() – plot of a function or other Sage object (e.g., elliptic curve)
parametric_plot()
implicit_plot()
polar_plot()
region_plot()
list_plot()
scatter_plot()
bar_chart()
contour_plot()
density_plot()
plot_vector_field()
plot_slope_field()
matrix_plot()
complex_plot()
graphics_array()
multi_graphics()
The following log plotting functions:

The following miscellaneous Graphics functions are included:

Type ? after each primitive in Sage for help and examples.

EXAMPLES:

We draw a curve:

Sage

sage: plot(x^2, (x,0,5))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(0),Integer(5)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,0,5))

We draw a circle and a curve:

Sage

sage: circle((1,1), 1) + plot(x^2, (x,0,5))
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> circle((Integer(1),Integer(1)), Integer(1)) + plot(x**Integer(2), (x,Integer(0),Integer(5)))
Graphics object consisting of 2 graphics primitives

Sage Live

circle((1,1), 1) + plot(x^2, (x,0,5))

Notice that the aspect ratio of the above plot makes the plot very tall because the plot adopts the default aspect ratio of the circle (to make the circle appear like a circle). We can change the aspect ratio to be what we normally expect for a plot by explicitly asking for an ‘automatic’ aspect ratio:

Sage

sage: show(circle((1,1), 1) + plot(x^2, (x,0,5)), aspect_ratio='automatic')

Python

>>> from sage.all import *
>>> show(circle((Integer(1),Integer(1)), Integer(1)) + plot(x**Integer(2), (x,Integer(0),Integer(5))), aspect_ratio='automatic')

Sage Live

show(circle((1,1), 1) + plot(x^2, (x,0,5)), aspect_ratio='automatic')

The aspect ratio describes the apparently height/width ratio of a unit square. If you want the vertical units to be twice as big as the horizontal units, specify an aspect ratio of 2:

Sage

sage: show(circle((1,1), 1) + plot(x^2, (x,0,5)), aspect_ratio=2)

Python

>>> from sage.all import *
>>> show(circle((Integer(1),Integer(1)), Integer(1)) + plot(x**Integer(2), (x,Integer(0),Integer(5))), aspect_ratio=Integer(2))

Sage Live

show(circle((1,1), 1) + plot(x^2, (x,0,5)), aspect_ratio=2)

The figsize option adjusts the figure size. The default figsize is 4. To make a figure that is roughly twice as big, use figsize=8:

Sage

sage: show(circle((1,1), 1) + plot(x^2, (x,0,5)), figsize=8)

Python

>>> from sage.all import *
>>> show(circle((Integer(1),Integer(1)), Integer(1)) + plot(x**Integer(2), (x,Integer(0),Integer(5))), figsize=Integer(8))

Sage Live

show(circle((1,1), 1) + plot(x^2, (x,0,5)), figsize=8)

You can also give separate horizontal and vertical dimensions. Both will be measured in inches:

Sage

sage: show(circle((1,1), 1) + plot(x^2, (x,0,5)), figsize=[4,8])

Python

>>> from sage.all import *
>>> show(circle((Integer(1),Integer(1)), Integer(1)) + plot(x**Integer(2), (x,Integer(0),Integer(5))), figsize=[Integer(4),Integer(8)])

Sage Live

show(circle((1,1), 1) + plot(x^2, (x,0,5)), figsize=[4,8])

However, do not make the figsize too big (e.g. one dimension greater than 327 or both in the mid-200s) as this will lead to errors or crashes. See show() for full details.

Note that the axes will not cross if the data is not on both sides of both axes, even if it is quite close:

Sage

sage: plot(x^3, (x,1,10))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(3), (x,Integer(1),Integer(10)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^3, (x,1,10))

When the labels have quite different orders of magnitude or are very large, scientific notation (the $e$ notation for powers of ten) is used:

Sage

sage: plot(x^2, (x,480,500))  # no scientific notation
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(480),Integer(500)))  # no scientific notation
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,480,500))  # no scientific notation

Sage

sage: plot(x^2, (x,300,500))  # scientific notation on y-axis
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(300),Integer(500)))  # scientific notation on y-axis
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,300,500))  # scientific notation on y-axis

But you can fix your own tick labels, if you know what to expect and have a preference:

Sage

sage: plot(x^2, (x,300,500), ticks=[100,50000])
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(300),Integer(500)), ticks=[Integer(100),Integer(50000)])
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,300,500), ticks=[100,50000])

To change the ticks on one axis only, use the following notation:

Sage

sage: plot(x^2, (x,300,500), ticks=[None,50000])
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(300),Integer(500)), ticks=[None,Integer(50000)])
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,300,500), ticks=[None,50000])

You can even have custom tick labels along with custom positioning.

Sage

sage: plot(x^2, (x,0,3), ticks=[[1,2.5],pi/2], tick_formatter=[["$x_1$","$x_2$"],pi])  # long time
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(0),Integer(3)), ticks=[[Integer(1),RealNumber('2.5')],pi/Integer(2)], tick_formatter=[["$x_1$","$x_2$"],pi])  # long time
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,0,3), ticks=[[1,2.5],pi/2], tick_formatter=[["$x_1$","$x_2$"],pi])  # long time

We construct a plot involving several graphics objects:

Sage

sage: G = plot(cos(x), (x, -5, 5), thickness=5, color='green', title='A plot')
sage: P = polygon([[1,2], [5,6], [5,0]], color='red')
sage: G + P
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> G = plot(cos(x), (x, -Integer(5), Integer(5)), thickness=Integer(5), color='green', title='A plot')
>>> P = polygon([[Integer(1),Integer(2)], [Integer(5),Integer(6)], [Integer(5),Integer(0)]], color='red')
>>> G + P
Graphics object consisting of 2 graphics primitives

Sage Live

G = plot(cos(x), (x, -5, 5), thickness=5, color='green', title='A plot')
P = polygon([[1,2], [5,6], [5,0]], color='red')
G + P

Next we construct the reflection of the above polygon about the $y$-axis by iterating over the list of first-coordinates of the first graphic element of P (which is the actual Polygon; note that P is a Graphics object, which consists of a single polygon):

Sage

sage: Q = polygon([(-x,y) for x,y in P[0]], color='blue')
sage: Q   # show it
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> Q = polygon([(-x,y) for x,y in P[Integer(0)]], color='blue')
>>> Q   # show it
Graphics object consisting of 1 graphics primitive

Sage Live

Q = polygon([(-x,y) for x,y in P[0]], color='blue')
Q   # show it

We combine together different graphics objects using “+”:

Sage

sage: H = G + P + Q
sage: print(H)
Graphics object consisting of 3 graphics primitives
sage: type(H)
<class 'sage.plot.graphics.Graphics'>
sage: H[1]
Polygon defined by 3 points
sage: list(H[1])
[(1.0, 2.0), (5.0, 6.0), (5.0, 0.0)]
sage: H       # show it
Graphics object consisting of 3 graphics primitives

Python

>>> from sage.all import *
>>> H = G + P + Q
>>> print(H)
Graphics object consisting of 3 graphics primitives
>>> type(H)
<class 'sage.plot.graphics.Graphics'>
>>> H[Integer(1)]
Polygon defined by 3 points
>>> list(H[Integer(1)])
[(1.0, 2.0), (5.0, 6.0), (5.0, 0.0)]
>>> H       # show it
Graphics object consisting of 3 graphics primitives

Sage Live

H = G + P + Q
print(H)
type(H)
H[1]
list(H[1])
H       # show it

We can put text in a graph:

Sage

sage: L = [[cos(pi*i/100)^3,sin(pi*i/100)] for i in range(200)]
sage: p = line(L, rgbcolor=(1/4,1/8,3/4))
sage: tt = text('A Bulb', (1.5, 0.25))
sage: tx = text('x axis', (1.5,-0.2))
sage: ty = text('y axis', (0.4,0.9))
sage: g = p + tt + tx + ty
sage: g.show(xmin=-1.5, xmax=2, ymin=-1, ymax=1)

Python

>>> from sage.all import *
>>> L = [[cos(pi*i/Integer(100))**Integer(3),sin(pi*i/Integer(100))] for i in range(Integer(200))]
>>> p = line(L, rgbcolor=(Integer(1)/Integer(4),Integer(1)/Integer(8),Integer(3)/Integer(4)))
>>> tt = text('A Bulb', (RealNumber('1.5'), RealNumber('0.25')))
>>> tx = text('x axis', (RealNumber('1.5'),-RealNumber('0.2')))
>>> ty = text('y axis', (RealNumber('0.4'),RealNumber('0.9')))
>>> g = p + tt + tx + ty
>>> g.show(xmin=-RealNumber('1.5'), xmax=Integer(2), ymin=-Integer(1), ymax=Integer(1))

Sage Live

L = [[cos(pi*i/100)^3,sin(pi*i/100)] for i in range(200)]
p = line(L, rgbcolor=(1/4,1/8,3/4))
tt = text('A Bulb', (1.5, 0.25))
tx = text('x axis', (1.5,-0.2))
ty = text('y axis', (0.4,0.9))
g = p + tt + tx + ty
g.show(xmin=-1.5, xmax=2, ymin=-1, ymax=1)

We can add a graphics object to another one as an inset:

Sage

sage: g1 = plot(x^2*sin(1/x), (x, -2, 2), axes_labels=['$x$', '$y$'])
sage: g2 = plot(x^2*sin(1/x), (x, -0.3, 0.3), axes_labels=['$x$', '$y$'],
....:           frame=True)
sage: g1.inset(g2, pos=(0.15, 0.7, 0.25, 0.25))
Multigraphics with 2 elements

Python

>>> from sage.all import *
>>> g1 = plot(x**Integer(2)*sin(Integer(1)/x), (x, -Integer(2), Integer(2)), axes_labels=['$x$', '$y$'])
>>> g2 = plot(x**Integer(2)*sin(Integer(1)/x), (x, -RealNumber('0.3'), RealNumber('0.3')), axes_labels=['$x$', '$y$'],
...           frame=True)
>>> g1.inset(g2, pos=(RealNumber('0.15'), RealNumber('0.7'), RealNumber('0.25'), RealNumber('0.25')))
Multigraphics with 2 elements

Sage Live

g1 = plot(x^2*sin(1/x), (x, -2, 2), axes_labels=['$x$', '$y$'])
g2 = plot(x^2*sin(1/x), (x, -0.3, 0.3), axes_labels=['$x$', '$y$'],
          frame=True)
g1.inset(g2, pos=(0.15, 0.7, 0.25, 0.25))

We can add a title to a graph:

Sage

sage: plot(x^2, (x,-2,2), title='A plot of $x^2$')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,-Integer(2),Integer(2)), title='A plot of $x^2$')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,-2,2), title='A plot of $x^2$')

We can set the position of the title:

Sage

sage: plot(x^2, (-2,2), title='Plot of $x^2$', title_pos=(0.5,-0.05))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (-Integer(2),Integer(2)), title='Plot of $x^2$', title_pos=(RealNumber('0.5'),-RealNumber('0.05')))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (-2,2), title='Plot of $x^2$', title_pos=(0.5,-0.05))

We plot the Riemann zeta function along the critical line and see the first few zeros:

Sage

sage: i = CDF.0      # define i this way for maximum speed.
sage: p1 = plot(lambda t: arg(zeta(0.5+t*i)), 1, 27, rgbcolor=(0.8,0,0))
sage: p2 = plot(lambda t: abs(zeta(0.5+t*i)), 1, 27, color=hue(0.7))
sage: print(p1 + p2)
Graphics object consisting of 2 graphics primitives
sage: p1 + p2    # display it
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> i = CDF.gen(0)      # define i this way for maximum speed.
>>> p1 = plot(lambda t: arg(zeta(RealNumber('0.5')+t*i)), Integer(1), Integer(27), rgbcolor=(RealNumber('0.8'),Integer(0),Integer(0)))
>>> p2 = plot(lambda t: abs(zeta(RealNumber('0.5')+t*i)), Integer(1), Integer(27), color=hue(RealNumber('0.7')))
>>> print(p1 + p2)
Graphics object consisting of 2 graphics primitives
>>> p1 + p2    # display it
Graphics object consisting of 2 graphics primitives

Sage Live

i = CDF.0      # define i this way for maximum speed.
p1 = plot(lambda t: arg(zeta(0.5+t*i)), 1, 27, rgbcolor=(0.8,0,0))
p2 = plot(lambda t: abs(zeta(0.5+t*i)), 1, 27, color=hue(0.7))
print(p1 + p2)
p1 + p2    # display it

Note

Not all functions in Sage are symbolic. When plotting non-symbolic functions they should be wrapped in lambda:

Sage

sage: plot(lambda x:fibonacci(round(x)), (x,1,10))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(lambda x:fibonacci(round(x)), (x,Integer(1),Integer(10)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(lambda x:fibonacci(round(x)), (x,1,10))

Many concentric circles shrinking toward the origin:

Sage

sage: show(sum(circle((i,0), i, hue=sin(i/10)) for i in [10,9.9,..,0]))  # long time

Python

>>> from sage.all import *
>>> show(sum(circle((i,Integer(0)), i, hue=sin(i/Integer(10))) for i in (ellipsis_range(Integer(10),RealNumber('9.9'),Ellipsis,Integer(0)))))  # long time

Sage Live

show(sum(circle((i,0), i, hue=sin(i/10)) for i in [10,9.9,..,0]))  # long time

Here is a pretty graph:

Sage

sage: g = Graphics()
sage: for i in range(60):
....:    p = polygon([(i*cos(i),i*sin(i)), (0,i), (i,0)],\
....:                color=hue(i/40+0.4), alpha=0.2)
....:    g = g + p
sage: g.show(dpi=200, axes=False)

Python

>>> from sage.all import *
>>> g = Graphics()
>>> for i in range(Integer(60)):
...    p = polygon([(i*cos(i),i*sin(i)), (Integer(0),i), (i,Integer(0))],               color=hue(i/Integer(40)+RealNumber('0.4')), alpha=RealNumber('0.2'))
...    g = g + p
>>> g.show(dpi=Integer(200), axes=False)

Sage Live

g = Graphics()
for i in range(60):
   p = polygon([(i*cos(i),i*sin(i)), (0,i), (i,0)],\
               color=hue(i/40+0.4), alpha=0.2)
   g = g + p
g.show(dpi=200, axes=False)

Another graph:

Sage

sage: x = var('x')
sage: P = plot(sin(x)/x, -4, 4, color='blue') + \
....:     plot(x*cos(x), -4, 4, color='red') + \
....:     plot(tan(x), -4, 4, color='green')
sage: P.show(ymin=-pi, ymax=pi)

Python

>>> from sage.all import *
>>> x = var('x')
>>> P = plot(sin(x)/x, -Integer(4), Integer(4), color='blue') +     plot(x*cos(x), -Integer(4), Integer(4), color='red') +     plot(tan(x), -Integer(4), Integer(4), color='green')
>>> P.show(ymin=-pi, ymax=pi)

Sage Live

x = var('x')
P = plot(sin(x)/x, -4, 4, color='blue') + \
    plot(x*cos(x), -4, 4, color='red') + \
    plot(tan(x), -4, 4, color='green')
P.show(ymin=-pi, ymax=pi)

PYX EXAMPLES: These are some examples of plots similar to some of the plots in the PyX (http://pyx.sourceforge.net) documentation:

Symbolline:

Sage

sage: y(x) = x*sin(x^2)
sage: v = [(x, y(x)) for x in [-3,-2.95,..,3]]
sage: show(points(v, rgbcolor=(0.2,0.6, 0.1), pointsize=30) + plot(spline(v), -3.1, 3))

Python

>>> from sage.all import *
>>> __tmp__=var("x"); y = symbolic_expression(x*sin(x**Integer(2))).function(x)
>>> v = [(x, y(x)) for x in (ellipsis_range(-Integer(3),-RealNumber('2.95'),Ellipsis,Integer(3)))]
>>> show(points(v, rgbcolor=(RealNumber('0.2'),RealNumber('0.6'), RealNumber('0.1')), pointsize=Integer(30)) + plot(spline(v), -RealNumber('3.1'), Integer(3)))

Sage Live

y(x) = x*sin(x^2)
v = [(x, y(x)) for x in [-3,-2.95,..,3]]
show(points(v, rgbcolor=(0.2,0.6, 0.1), pointsize=30) + plot(spline(v), -3.1, 3))

Cycliclink:

Sage

sage: g1 = plot(cos(20*x)*exp(-2*x), 0, 1)
sage: g2 = plot(2*exp(-30*x) - exp(-3*x), 0, 1)
sage: show(graphics_array([g1, g2], 2, 1))

Python

>>> from sage.all import *
>>> g1 = plot(cos(Integer(20)*x)*exp(-Integer(2)*x), Integer(0), Integer(1))
>>> g2 = plot(Integer(2)*exp(-Integer(30)*x) - exp(-Integer(3)*x), Integer(0), Integer(1))
>>> show(graphics_array([g1, g2], Integer(2), Integer(1)))

Sage Live

g1 = plot(cos(20*x)*exp(-2*x), 0, 1)
g2 = plot(2*exp(-30*x) - exp(-3*x), 0, 1)
show(graphics_array([g1, g2], 2, 1))

Pi Axis:

Sage

sage: g1 = plot(sin(x), 0, 2*pi)
sage: g2 = plot(cos(x), 0, 2*pi, linestyle='--')
sage: (g1 + g2).show(ticks=pi/6,        # show their sum, nicely formatted  # long time
....:                tick_formatter=pi)

Python

>>> from sage.all import *
>>> g1 = plot(sin(x), Integer(0), Integer(2)*pi)
>>> g2 = plot(cos(x), Integer(0), Integer(2)*pi, linestyle='--')
>>> (g1 + g2).show(ticks=pi/Integer(6),        # show their sum, nicely formatted  # long time
...                tick_formatter=pi)

Sage Live

g1 = plot(sin(x), 0, 2*pi)
g2 = plot(cos(x), 0, 2*pi, linestyle='--')
(g1 + g2).show(ticks=pi/6,        # show their sum, nicely formatted  # long time
               tick_formatter=pi)

An illustration of integration:

Sage

sage: f(x) = (x-3)*(x-5)*(x-7)+40
sage: P = line([(2,0),(2,f(2))], color='black')
sage: P += line([(8,0),(8,f(8))], color='black')
sage: P += polygon([(2,0),(2,f(2))] + [(x, f(x)) for x in [2,2.1,..,8]] + [(8,0),(2,0)],
....:              rgbcolor=(0.8,0.8,0.8), aspect_ratio='automatic')
sage: P += text("$\\int_{a}^b f(x) dx$", (5, 20), fontsize=16, color='black')
sage: P += plot(f, (1, 8.5), thickness=3)
sage: P    # show the result
Graphics object consisting of 5 graphics primitives

Python

>>> from sage.all import *
>>> __tmp__=var("x"); f = symbolic_expression((x-Integer(3))*(x-Integer(5))*(x-Integer(7))+Integer(40)).function(x)
>>> P = line([(Integer(2),Integer(0)),(Integer(2),f(Integer(2)))], color='black')
>>> P += line([(Integer(8),Integer(0)),(Integer(8),f(Integer(8)))], color='black')
>>> P += polygon([(Integer(2),Integer(0)),(Integer(2),f(Integer(2)))] + [(x, f(x)) for x in (ellipsis_range(Integer(2),RealNumber('2.1'),Ellipsis,Integer(8)))] + [(Integer(8),Integer(0)),(Integer(2),Integer(0))],
...              rgbcolor=(RealNumber('0.8'),RealNumber('0.8'),RealNumber('0.8')), aspect_ratio='automatic')
>>> P += text("$\\int_{a}^b f(x) dx$", (Integer(5), Integer(20)), fontsize=Integer(16), color='black')
>>> P += plot(f, (Integer(1), RealNumber('8.5')), thickness=Integer(3))
>>> P    # show the result
Graphics object consisting of 5 graphics primitives

Sage Live

f(x) = (x-3)*(x-5)*(x-7)+40
P = line([(2,0),(2,f(2))], color='black')
P += line([(8,0),(8,f(8))], color='black')
P += polygon([(2,0),(2,f(2))] + [(x, f(x)) for x in [2,2.1,..,8]] + [(8,0),(2,0)],
             rgbcolor=(0.8,0.8,0.8), aspect_ratio='automatic')
P += text("$\\int_{a}^b f(x) dx$", (5, 20), fontsize=16, color='black')
P += plot(f, (1, 8.5), thickness=3)
P    # show the result

NUMERICAL PLOTTING:

Sage includes Matplotlib, which provides 2D plotting with an interface that is a likely very familiar to people doing numerical computation. You can use plt.clf() to clear the current image frame and plt.close() to close it. For example,

Sage

sage: import pylab as plt
sage: t = plt.arange(0.0, 2.0, 0.01)
sage: s = sin(2*pi*t)
sage: P = plt.plot(t, s, linewidth=1.0)
sage: xl = plt.xlabel('time (s)')
sage: yl = plt.ylabel('voltage (mV)')
sage: t = plt.title('About as simple as it gets, folks')
sage: plt.grid(True)
sage: import tempfile
sage: with tempfile.NamedTemporaryFile(suffix='.png') as f1:
....:     plt.savefig(f1.name)
sage: plt.clf()
sage: with tempfile.NamedTemporaryFile(suffix='.png') as f2:
....:     plt.savefig(f2.name)
sage: plt.close()
sage: plt.imshow([[1,2],[0,1]])
<matplotlib.image.AxesImage object at ...>

Python

>>> from sage.all import *
>>> import pylab as plt
>>> t = plt.arange(RealNumber('0.0'), RealNumber('2.0'), RealNumber('0.01'))
>>> s = sin(Integer(2)*pi*t)
>>> P = plt.plot(t, s, linewidth=RealNumber('1.0'))
>>> xl = plt.xlabel('time (s)')
>>> yl = plt.ylabel('voltage (mV)')
>>> t = plt.title('About as simple as it gets, folks')
>>> plt.grid(True)
>>> import tempfile
>>> with tempfile.NamedTemporaryFile(suffix='.png') as f1:
...     plt.savefig(f1.name)
>>> plt.clf()
>>> with tempfile.NamedTemporaryFile(suffix='.png') as f2:
...     plt.savefig(f2.name)
>>> plt.close()
>>> plt.imshow([[Integer(1),Integer(2)],[Integer(0),Integer(1)]])
<matplotlib.image.AxesImage object at ...>

Sage Live

import pylab as plt
t = plt.arange(0.0, 2.0, 0.01)
s = sin(2*pi*t)
P = plt.plot(t, s, linewidth=1.0)
xl = plt.xlabel('time (s)')
yl = plt.ylabel('voltage (mV)')
t = plt.title('About as simple as it gets, folks')
plt.grid(True)
import tempfile
with tempfile.NamedTemporaryFile(suffix='.png') as f1:
    plt.savefig(f1.name)
plt.clf()
with tempfile.NamedTemporaryFile(suffix='.png') as f2:
    plt.savefig(f2.name)
plt.close()
plt.imshow([[1,2],[0,1]])

We test that imshow works as well, verifying that Issue #2900 is fixed (in Matplotlib).

Sage

sage: plt.imshow([[(0.0,0.0,0.0)]])
<matplotlib.image.AxesImage object at ...>
sage: import tempfile
sage: with tempfile.NamedTemporaryFile(suffix='.png') as f:
....:     plt.savefig(f.name)

Python

>>> from sage.all import *
>>> plt.imshow([[(RealNumber('0.0'),RealNumber('0.0'),RealNumber('0.0'))]])
<matplotlib.image.AxesImage object at ...>
>>> import tempfile
>>> with tempfile.NamedTemporaryFile(suffix='.png') as f:
...     plt.savefig(f.name)

Sage Live

plt.imshow([[(0.0,0.0,0.0)]])
import tempfile
with tempfile.NamedTemporaryFile(suffix='.png') as f:
    plt.savefig(f.name)

Since the above overwrites many Sage plotting functions, we reset the state of Sage, so that the examples below work!

Sage

sage: reset()

Python

>>> from sage.all import *
>>> reset()

Sage Live

reset()

See http://matplotlib.sourceforge.net for complete documentation about how to use Matplotlib.

AUTHORS:

Alex Clemesha and William Stein (2006-04-10): initial version
David Joyner: examples
Alex Clemesha (2006-05-04) major update
William Stein (2006-05-29): fine tuning, bug fixes, better server integration
William Stein (2006-07-01): misc polish
Alex Clemesha (2006-09-29): added contour_plot, frame axes, misc polishing
Robert Miller (2006-10-30): tuning, NetworkX primitive
Alex Clemesha (2006-11-25): added plot_vector_field, matrix_plot, arrow, bar_chart, Axes class usage (see axes.py)
Bobby Moretti and William Stein (2008-01): Change plot to specify ranges using the (varname, min, max) notation.
William Stein (2008-01-19): raised the documentation coverage from a miserable 12 percent to a ‘wopping’ 35 percent, and fixed and clarified numerous small issues.
Jason Grout (2009-09-05): shifted axes and grid functionality over to matplotlib; fixed a number of smaller issues.
Jason Grout (2010-10): rewrote aspect ratio portions of the code
Jeroen Demeyer (2012-04-19): move parts of this file to graphics.py (Issue #12857)
Aaron Lauve (2016-07-13): reworked handling of ‘color’ when passed a list of functions; now more in-line with other CAS’s. Added list functionality to linestyle and legend_label options as well. (Issue #12962)
Eric Gourgoulhon (2019-04-24): add multi_graphics() and insets

sage.plot.plot.SelectiveFormatter(formatter, skip_values)[source]¶

This matplotlib formatter selectively omits some tick values and passes the rest on to a specified formatter.

EXAMPLES:

This example is almost straight from a matplotlib example.

Sage

sage: # needs numpy
sage: from sage.plot.plot import SelectiveFormatter
sage: import matplotlib.pyplot as plt
sage: import numpy
sage: fig = plt.figure()
sage: ax = fig.add_subplot(111)
sage: t = numpy.arange(0.0, 2.0, 0.01)
sage: s = numpy.sin(2*numpy.pi*t)
sage: p = ax.plot(t, s)
sage: formatter = SelectiveFormatter(ax.xaxis.get_major_formatter(),
....:                                skip_values=[0,1])
sage: ax.xaxis.set_major_formatter(formatter)
sage: import tempfile
sage: with tempfile.NamedTemporaryFile(suffix='.png') as f:
....:     fig.savefig(f.name)

Python

>>> from sage.all import *
>>> # needs numpy
>>> from sage.plot.plot import SelectiveFormatter
>>> import matplotlib.pyplot as plt
>>> import numpy
>>> fig = plt.figure()
>>> ax = fig.add_subplot(Integer(111))
>>> t = numpy.arange(RealNumber('0.0'), RealNumber('2.0'), RealNumber('0.01'))
>>> s = numpy.sin(Integer(2)*numpy.pi*t)
>>> p = ax.plot(t, s)
>>> formatter = SelectiveFormatter(ax.xaxis.get_major_formatter(),
...                                skip_values=[Integer(0),Integer(1)])
>>> ax.xaxis.set_major_formatter(formatter)
>>> import tempfile
>>> with tempfile.NamedTemporaryFile(suffix='.png') as f:
...     fig.savefig(f.name)

Sage Live

# needs numpy
from sage.plot.plot import SelectiveFormatter
import matplotlib.pyplot as plt
import numpy
fig = plt.figure()
ax = fig.add_subplot(111)
t = numpy.arange(0.0, 2.0, 0.01)
s = numpy.sin(2*numpy.pi*t)
p = ax.plot(t, s)
formatter = SelectiveFormatter(ax.xaxis.get_major_formatter(),
                               skip_values=[0,1])
ax.xaxis.set_major_formatter(formatter)
import tempfile
with tempfile.NamedTemporaryFile(suffix='.png') as f:
    fig.savefig(f.name)

sage.plot.plot.adaptive_refinement(f, p1, p2, adaptive_tolerance, adaptive_recursion=0.01, level=5, excluded=0)[source]¶

The adaptive refinement algorithm for plotting a function f. See the docstring for plot for a description of the algorithm.

INPUT:

f – a function of one variable
p1, p2 – two points to refine between
adaptive_recursion – (default: $5$) how many levels of recursion to go before giving up when doing adaptive refinement. Setting this to 0 disables adaptive refinement.
adaptive_tolerance – (default: $0.01$) how large a relative difference should be before the adaptive refinement code considers it significant; see documentation for generate_plot_points for more information. See the documentation for plot() for more information on how the adaptive refinement algorithm works.
excluded – (default: False) also return locations where it has been discovered that the function is not defined (y-value will be 'NaN' in this case)

OUTPUT:

A list of points to insert between p1 and p2 to get a better linear approximation between them. If excluded, also x-values for which the calculation failed are given with 'NaN' as y-value.

sage.plot.plot.generate_plot_points(f, xrange, plot_points, adaptive_tolerance, adaptive_recursion=5, randomize=0.01, initial_points=5, excluded=True, imaginary_tolerance=None)[source]¶

Calculate plot points for a function f in the interval xrange. The adaptive refinement algorithm is also automatically invoked with a relative adaptive tolerance of adaptive_tolerance; see below.

INPUT:

f – a function of one variable
p1, p2 – two points to refine between
plot_points – (default: 5) the minimal number of plot points. (Note however that in any actual plot a number is passed to this, with default value 200.)
adaptive_recursion – (default: 5) how many levels of recursion to go before giving up when doing adaptive refinement. Setting this to 0 disables adaptive refinement.
adaptive_tolerance – (default: 0.01) how large the relative difference should be before the adaptive refinement code considers it significant. If the actual difference is greater than adaptive_tolerance*delta, where delta is the initial subinterval size for the given xrange and plot_points, then the algorithm will consider it significant.
initial_points – (default: None) a list of x-values that should be evaluated
excluded – (default: False) add a list of discovered x-values, for which f is not defined
imaginary_tolerance – (default: 1e-8) if an imaginary number arises (due, for example, to numerical issues), this tolerance specifies how large it has to be in magnitude before we raise an error. In other words, imaginary parts smaller than this are ignored in your plot points.

OUTPUT:

a list of points (x, f(x)) in the interval xrange, which approximate the function f.
if excluded a tuple consisting of the above and a list of x-values at which f is not defined

sage.plot.plot.graphics_array(array, nrows=None, ncols=None)[source]¶

Plot a list of lists (or tuples) of graphics objects on one canvas, arranged as an array.

INPUT:

array – either a list of lists of Graphics elements or a single list of Graphics elements
nrows, ncols – (optional) integers. If both are given then the input array is flattened and turned into an nrows x ncols array, with blank graphics objects padded at the end, if necessary. If only one is specified, the other is chosen automatically.

OUTPUT: an instance of GraphicsArray

EXAMPLES:

Make some plots of $\sin$ functions:

Sage

sage: # long time
sage: f(x) = sin(x)
sage: g(x) = sin(2*x)
sage: h(x) = sin(4*x)
sage: p1 = plot(f, (-2*pi,2*pi), color=hue(0.5))
sage: p2 = plot(g, (-2*pi,2*pi), color=hue(0.9))
sage: p3 = parametric_plot((f,g), (0,2*pi), color=hue(0.6))
sage: p4 = parametric_plot((f,h), (0,2*pi), color=hue(1.0))

Python

>>> from sage.all import *
>>> # long time
>>> __tmp__=var("x"); f = symbolic_expression(sin(x)).function(x)
>>> __tmp__=var("x"); g = symbolic_expression(sin(Integer(2)*x)).function(x)
>>> __tmp__=var("x"); h = symbolic_expression(sin(Integer(4)*x)).function(x)
>>> p1 = plot(f, (-Integer(2)*pi,Integer(2)*pi), color=hue(RealNumber('0.5')))
>>> p2 = plot(g, (-Integer(2)*pi,Integer(2)*pi), color=hue(RealNumber('0.9')))
>>> p3 = parametric_plot((f,g), (Integer(0),Integer(2)*pi), color=hue(RealNumber('0.6')))
>>> p4 = parametric_plot((f,h), (Integer(0),Integer(2)*pi), color=hue(RealNumber('1.0')))

Sage Live

# long time
f(x) = sin(x)
g(x) = sin(2*x)
h(x) = sin(4*x)
p1 = plot(f, (-2*pi,2*pi), color=hue(0.5))
p2 = plot(g, (-2*pi,2*pi), color=hue(0.9))
p3 = parametric_plot((f,g), (0,2*pi), color=hue(0.6))
p4 = parametric_plot((f,h), (0,2*pi), color=hue(1.0))

Now make a graphics array out of the plots:

Sage

sage: graphics_array(((p1,p2), (p3,p4)))        # long time
Graphics Array of size 2 x 2

Python

>>> from sage.all import *
>>> graphics_array(((p1,p2), (p3,p4)))        # long time
Graphics Array of size 2 x 2

Sage Live

graphics_array(((p1,p2), (p3,p4)))        # long time

One can also name the array, and then use show() or save():

Sage

sage: ga = graphics_array(((p1,p2), (p3,p4)))   # long time
sage: ga.show() # long time; same output as above

Python

>>> from sage.all import *
>>> ga = graphics_array(((p1,p2), (p3,p4)))   # long time
>>> ga.show() # long time; same output as above

Sage Live

ga = graphics_array(((p1,p2), (p3,p4)))   # long time
ga.show() # long time; same output as above

Here we give only one row:

Sage

sage: p1 = plot(sin, (-4,4))
sage: p2 = plot(cos, (-4,4))
sage: ga = graphics_array([p1, p2]); ga
Graphics Array of size 1 x 2
sage: ga.show()

Python

>>> from sage.all import *
>>> p1 = plot(sin, (-Integer(4),Integer(4)))
>>> p2 = plot(cos, (-Integer(4),Integer(4)))
>>> ga = graphics_array([p1, p2]); ga
Graphics Array of size 1 x 2
>>> ga.show()

Sage Live

p1 = plot(sin, (-4,4))
p2 = plot(cos, (-4,4))
ga = graphics_array([p1, p2]); ga
ga.show()

It is possible to use figsize to change the size of the plot as a whole:

Sage

sage: x = var('x')
sage: L = [plot(sin(k*x), (x,-pi,pi)) for k in [1..3]]
sage: ga = graphics_array(L)
sage: ga.show(figsize=[5,3])  # smallish and compact

Python

>>> from sage.all import *
>>> x = var('x')
>>> L = [plot(sin(k*x), (x,-pi,pi)) for k in (ellipsis_range(Integer(1),Ellipsis,Integer(3)))]
>>> ga = graphics_array(L)
>>> ga.show(figsize=[Integer(5),Integer(3)])  # smallish and compact

Sage Live

x = var('x')
L = [plot(sin(k*x), (x,-pi,pi)) for k in [1..3]]
ga = graphics_array(L)
ga.show(figsize=[5,3])  # smallish and compact

Sage

sage: ga.show(figsize=[5,7])  # tall and thin; long time

Python

>>> from sage.all import *
>>> ga.show(figsize=[Integer(5),Integer(7)])  # tall and thin; long time

Sage Live

ga.show(figsize=[5,7])  # tall and thin; long time

Sage

sage: ga.show(figsize=4)  # width=4 inches, height fixed from default aspect ratio

Python

>>> from sage.all import *
>>> ga.show(figsize=Integer(4))  # width=4 inches, height fixed from default aspect ratio

Sage Live

ga.show(figsize=4)  # width=4 inches, height fixed from default aspect ratio

Specifying only the number of rows or the number of columns computes the other dimension automatically:

Sage

sage: ga = graphics_array([plot(sin)] * 10, nrows=3)
sage: ga.nrows(), ga.ncols()
(3, 4)
sage: ga = graphics_array([plot(sin)] * 10, ncols=3)
sage: ga.nrows(), ga.ncols()
(4, 3)
sage: ga = graphics_array([plot(sin)] * 4, nrows=2)
sage: ga.nrows(), ga.ncols()
(2, 2)
sage: ga = graphics_array([plot(sin)] * 6, ncols=2)
sage: ga.nrows(), ga.ncols()
(3, 2)

Python

>>> from sage.all import *
>>> ga = graphics_array([plot(sin)] * Integer(10), nrows=Integer(3))
>>> ga.nrows(), ga.ncols()
(3, 4)
>>> ga = graphics_array([plot(sin)] * Integer(10), ncols=Integer(3))
>>> ga.nrows(), ga.ncols()
(4, 3)
>>> ga = graphics_array([plot(sin)] * Integer(4), nrows=Integer(2))
>>> ga.nrows(), ga.ncols()
(2, 2)
>>> ga = graphics_array([plot(sin)] * Integer(6), ncols=Integer(2))
>>> ga.nrows(), ga.ncols()
(3, 2)

Sage Live

ga = graphics_array([plot(sin)] * 10, nrows=3)
ga.nrows(), ga.ncols()
ga = graphics_array([plot(sin)] * 10, ncols=3)
ga.nrows(), ga.ncols()
ga = graphics_array([plot(sin)] * 4, nrows=2)
ga.nrows(), ga.ncols()
ga = graphics_array([plot(sin)] * 6, ncols=2)
ga.nrows(), ga.ncols()

The options like fontsize, scale or frame passed to individual plots are preserved:

Sage

sage: p1 = plot(sin(x^2), (x, 0, 6),
....:           axes_labels=[r'$\theta$', r'$\sin(\theta^2)$'], fontsize=16)
sage: p2 = plot(x^3, (x, 1, 100), axes_labels=[r'$x$', r'$y$'],
....:           scale='semilogy', frame=True, gridlines='minor')
sage: ga = graphics_array([p1, p2])
sage: ga.show()

Python

>>> from sage.all import *
>>> p1 = plot(sin(x**Integer(2)), (x, Integer(0), Integer(6)),
...           axes_labels=[r'$\theta$', r'$\sin(\theta^2)$'], fontsize=Integer(16))
>>> p2 = plot(x**Integer(3), (x, Integer(1), Integer(100)), axes_labels=[r'$x$', r'$y$'],
...           scale='semilogy', frame=True, gridlines='minor')
>>> ga = graphics_array([p1, p2])
>>> ga.show()

Sage Live

p1 = plot(sin(x^2), (x, 0, 6),
          axes_labels=[r'$\theta$', r'$\sin(\theta^2)$'], fontsize=16)
p2 = plot(x^3, (x, 1, 100), axes_labels=[r'$x$', r'$y$'],
          scale='semilogy', frame=True, gridlines='minor')
ga = graphics_array([p1, p2])
ga.show()

See also

MultiGraphics for more examples

sage.plot.plot.parametric_plot(funcs, aspect_ratio=1.0, *args, **kwargs)[source]¶

Plot a parametric curve or surface in 2d or 3d.

parametric_plot() takes two or three functions as a list or a tuple and makes a plot with the first function giving the $x$ coordinates, the second function giving the $y$ coordinates, and the third function (if present) giving the $z$ coordinates.

In the 2d case, parametric_plot() is equivalent to the plot() command with the option parametric=True. In the 3d case, parametric_plot() is equivalent to parametric_plot3d(). See each of these functions for more help and examples.

INPUT:

funcs – 2 or 3-tuple of functions, or a vector of dimension 2 or 3
other options – passed to plot() or parametric_plot3d()

EXAMPLES: We draw some 2d parametric plots. Note that the default aspect ratio is 1, so that circles look like circles.

Sage

sage: t = var('t')
sage: parametric_plot((cos(t), sin(t)), (t, 0, 2*pi))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> t = var('t')
>>> parametric_plot((cos(t), sin(t)), (t, Integer(0), Integer(2)*pi))
Graphics object consisting of 1 graphics primitive

Sage Live

t = var('t')
parametric_plot((cos(t), sin(t)), (t, 0, 2*pi))

Sage

sage: parametric_plot((sin(t), sin(2*t)), (t, 0, 2*pi), color=hue(0.6))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> parametric_plot((sin(t), sin(Integer(2)*t)), (t, Integer(0), Integer(2)*pi), color=hue(RealNumber('0.6')))
Graphics object consisting of 1 graphics primitive

Sage Live

parametric_plot((sin(t), sin(2*t)), (t, 0, 2*pi), color=hue(0.6))

Sage

sage: parametric_plot((1, t), (t, 0, 4))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> parametric_plot((Integer(1), t), (t, Integer(0), Integer(4)))
Graphics object consisting of 1 graphics primitive

Sage Live

parametric_plot((1, t), (t, 0, 4))

Note that in parametric_plot, there is only fill or no fill.

Sage

sage: parametric_plot((t, t^2), (t, -4, 4), fill=True)
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> parametric_plot((t, t**Integer(2)), (t, -Integer(4), Integer(4)), fill=True)
Graphics object consisting of 2 graphics primitives

Sage Live

parametric_plot((t, t^2), (t, -4, 4), fill=True)

A filled Hypotrochoid:

Sage

sage: parametric_plot([cos(x) + 2 * cos(x/4), sin(x) - 2 * sin(x/4)],
....:                 (x, 0, 8*pi), fill=True)
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> parametric_plot([cos(x) + Integer(2) * cos(x/Integer(4)), sin(x) - Integer(2) * sin(x/Integer(4))],
...                 (x, Integer(0), Integer(8)*pi), fill=True)
Graphics object consisting of 2 graphics primitives

Sage Live

parametric_plot([cos(x) + 2 * cos(x/4), sin(x) - 2 * sin(x/4)],
                (x, 0, 8*pi), fill=True)

Sage

sage: parametric_plot((5*cos(x), 5*sin(x), x), (x, -12, 12),  # long time
....:                 plot_points=150, color='red')
Graphics3d Object

Python

>>> from sage.all import *
>>> parametric_plot((Integer(5)*cos(x), Integer(5)*sin(x), x), (x, -Integer(12), Integer(12)),  # long time
...                 plot_points=Integer(150), color='red')
Graphics3d Object

Sage Live

parametric_plot((5*cos(x), 5*sin(x), x), (x, -12, 12),  # long time
                plot_points=150, color='red')

Sage

sage: y = var('y')
sage: parametric_plot((5*cos(x), x*y, cos(x*y)), (x, -4, 4), (y, -4, 4))  # long time
Graphics3d Object

Python

>>> from sage.all import *
>>> y = var('y')
>>> parametric_plot((Integer(5)*cos(x), x*y, cos(x*y)), (x, -Integer(4), Integer(4)), (y, -Integer(4), Integer(4)))  # long time
Graphics3d Object

Sage Live

y = var('y')
parametric_plot((5*cos(x), x*y, cos(x*y)), (x, -4, 4), (y, -4, 4))  # long time

Sage

sage: t = var('t')
sage: parametric_plot(vector((sin(t), sin(2*t))), (t, 0, 2*pi), color='green')  # long time
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> t = var('t')
>>> parametric_plot(vector((sin(t), sin(Integer(2)*t))), (t, Integer(0), Integer(2)*pi), color='green')  # long time
Graphics object consisting of 1 graphics primitive

Sage Live

t = var('t')
parametric_plot(vector((sin(t), sin(2*t))), (t, 0, 2*pi), color='green')  # long time

Sage

sage: t = var('t')
sage: parametric_plot( vector([t, t+1, t^2]), (t, 0, 1)) # long time
Graphics3d Object

Python

>>> from sage.all import *
>>> t = var('t')
>>> parametric_plot( vector([t, t+Integer(1), t**Integer(2)]), (t, Integer(0), Integer(1))) # long time
Graphics3d Object

Sage Live

t = var('t')
parametric_plot( vector([t, t+1, t^2]), (t, 0, 1)) # long time

Plotting in logarithmic scale is possible with 2D plots. The keyword aspect_ratio will be ignored if the scale is not 'loglog' or 'linear'.:

Sage

sage: parametric_plot((x, x**2), (x, 1, 10), scale='loglog')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> parametric_plot((x, x**Integer(2)), (x, Integer(1), Integer(10)), scale='loglog')
Graphics object consisting of 1 graphics primitive

Sage Live

parametric_plot((x, x**2), (x, 1, 10), scale='loglog')

We can also change the scale of the axes in the graphics just before displaying. In this case, the aspect_ratio must be specified as 'automatic' if the scale is set to 'semilogx' or 'semilogy'. For other values of the scale parameter, any aspect_ratio can be used, or the keyword need not be provided.:

Sage

sage: p = parametric_plot((x, x**2), (x, 1, 10))
sage: p.show(scale='semilogy', aspect_ratio='automatic')

Python

>>> from sage.all import *
>>> p = parametric_plot((x, x**Integer(2)), (x, Integer(1), Integer(10)))
>>> p.show(scale='semilogy', aspect_ratio='automatic')

Sage Live

p = parametric_plot((x, x**2), (x, 1, 10))
p.show(scale='semilogy', aspect_ratio='automatic')

sage.plot.plot.plot(funcs, alpha=1, thickness=1, fill=False, fillcolor='automatic', fillalpha=0.5, plot_points=200, adaptive_tolerance=0.01, adaptive_recursion=5, detect_poles=False, exclude=None, legend_label=None, aspect_ratio='automatic', imaginary_tolerance=1e-08, *args, **kwds)[source]¶

Use plot by writing.

plot(X, ...)

where $X$ is a Sage object (or list of Sage objects) that either is callable and returns numbers that can be coerced to floats, or has a plot method that returns a GraphicPrimitive object.

There are many other specialized 2D plot commands available in Sage, such as plot_slope_field, as well as various graphics primitives like Arrow; type sage.plot.plot? for a current list.

Type plot.options for a dictionary of the default options for plots. You can change this to change the defaults for all future plots. Use plot.reset() to reset to the default options.

PLOT OPTIONS:

plot_points – (default: 200) the minimal number of plot points
adaptive_recursion – (default: 5) how many levels of recursion to go before giving up when doing adaptive refinement. Setting this to 0 disables adaptive refinement.
adaptive_tolerance – (default: 0.01) how large a difference should be before the adaptive refinement code considers it significant. See the documentation further below for more information, starting at “the algorithm used to insert”.
imaginary_tolerance – (default: 1e-8) if an imaginary number arises (due, for example, to numerical issues), this tolerance specifies how large it has to be in magnitude before we raise an error. In other words, imaginary parts smaller than this are ignored in your plot points.
base – (default: $10$) the base of the logarithm if a logarithmic scale is set. This must be greater than 1. The base can be also given as a list or tuple (basex, basey). basex sets the base of the logarithm along the horizontal axis and basey sets the base along the vertical axis.
scale – string (default: 'linear'); scale of the axes. Possible values are 'linear', 'loglog', 'semilogx', 'semilogy'.

The scale can be also be given as single argument that is a list or tuple (scale, base) or (scale, basex, basey).

The 'loglog' scale sets both the horizontal and vertical axes to logarithmic scale. The 'semilogx' scale sets the horizontal axis to logarithmic scale. The 'semilogy' scale sets the vertical axis to logarithmic scale. The 'linear' scale is the default value when Graphics is initialized.
xmin – starting x value in the rendered figure. This parameter is passed directly to the show procedure and it could be overwritten.
xmax – ending x value in the rendered figure. This parameter is passed directly to the show procedure and it could be overwritten.
ymin – starting y value in the rendered figure. This parameter is passed directly to the show procedure and it could be overwritten.
ymax – ending y value in the rendered figure. This parameter is passed directly to the show procedure and it could be overwritten.
detect_poles – boolean (default: False); if set to True poles are detected. If set to “show” vertical asymptotes are drawn.
legend_label – a (TeX) string serving as the label for $X$ in the legend. If $X$ is a list, then this option can be a single string, or a list or dictionary with strings as entries/values. If a dictionary, then keys are taken from range(len(X)).

Note

If the scale is 'linear', then irrespective of what base is set to, it will default to 10 and will remain unused.
If you want to limit the plot along the horizontal axis in the final rendered figure, then pass the xmin and xmax keywords to the show() method. To limit the plot along the vertical axis, ymin and ymax keywords can be provided to either this plot command or to the show command.
This function does NOT simply sample equally spaced points between xmin and xmax. Instead it computes equally spaced points and adds small perturbations to them. This reduces the possibility of, e.g., sampling $\sin$ only at multiples of $2\pi$, which would yield a very misleading graph.
If there is a range of consecutive points where the function has no value, then those points will be excluded from the plot. See the example below on automatic exclusion of points.
For the other keyword options that the plot function can take, refer to the method show() and the further options below.

COLOR OPTIONS:

color – (default: 'blue') one of:
- an RGB tuple (r,g,b) with each of r,g,b between 0 and 1.
- a color name as a string (e.g., 'purple').
- an HTML color such as ‘#aaff0b’.
- a list or dictionary of colors (valid only if $X$ is a list): if a dictionary, keys are taken from range(len(X)); the entries/values of the list/dictionary may be any of the options above.
- 'automatic' – maps to default (‘blue’) if $X$ is a single Sage object; and maps to a fixed sequence of regularly spaced colors if $X$ is a list
legend_color – the color of the text for $X$ (or each item in $X$) in the legend. Default color is ‘black’. Options are as in color above, except that the choice ‘automatic’ maps to ‘black’ if $X$ is a single Sage object
fillcolor – the color of the fill for the plot of $X$ (or each item in $X$). Default color is ‘gray’ if $X$ is a single Sage object or if color is a single color. Otherwise, options are as in color above

APPEARANCE OPTIONS:

The following options affect the appearance of the line through the points on the graph of $X$ (these are the same as for the line function):

INPUT:

alpha – how transparent the line is
thickness – how thick the line is
rgbcolor – the color as an RGB tuple
hue – the color given as a hue

LINE OPTIONS:

Any MATPLOTLIB line option may also be passed in. E.g.,

linestyle – (default: '-') the style of the line, which is one of
- '-' or 'solid'
- '--' or 'dashed'
- '-.' or 'dash dot'
- ':' or 'dotted'
- "None" or " " or "" (nothing)
- a list or dictionary (see below)
The linestyle can also be prefixed with a drawing style (e.g., 'steps--')
- 'default' (connect the points with straight lines)
- 'steps' or 'steps-pre' (step function; horizontal line is to the left of point)
- 'steps-mid' (step function; points are in the middle of horizontal lines)
- 'steps-post' (step function; horizontal line is to the right of point)
If $X$ is a list, then linestyle may be a list (with entries taken from the strings above) or a dictionary (with keys in range(len(X)) and values taken from the strings above).
marker – the style of the markers, which is one of
- "None" or " " or "" (nothing) – default
- "," (pixel), "." (point)
- "_" (horizontal line), "|" (vertical line)
- "o" (circle), "p" (pentagon), "s" (square), "x" (x), "+" (plus), "*" (star)
- "D" (diamond), "d" (thin diamond)
- "H" (hexagon), "h" (alternative hexagon)
- "<" (triangle left), ">" (triangle right), "^" (triangle up), "v" (triangle down)
- "1" (tri down), "2" (tri up), "3" (tri left), "4" (tri right)
- 0 (tick left), 1 (tick right), 2 (tick up), 3 (tick down)
- 4 (caret left), 5 (caret right), 6 (caret up), 7 (caret down), 8 (octagon)
- "$...$" (math TeX string)
- (numsides, style, angle) to create a custom, regular symbol
  - numsides – the number of sides
  - style – 0 (regular polygon), 1 (star shape), 2 (asterisk), 3 (circle)
  - angle – the angular rotation in degrees
markersize – the size of the marker in points
markeredgecolor – the color of the marker edge
markerfacecolor – the color of the marker face
markeredgewidth – the size of the marker edge in points
exclude – (default: None) values which are excluded from the plot range. Either a list of real numbers, or an equation in one variable.

FILLING OPTIONS:

fill – boolean (default: False); one of:
- “axis” or True: Fill the area between the function and the x-axis.
- “min”: Fill the area between the function and its minimal value.
- “max”: Fill the area between the function and its maximal value.
- a number c: Fill the area between the function and the horizontal line y = c.
- a function g: Fill the area between the function that is plotted and g.
- a dictionary d (only if a list of functions are plotted): The keys of the dictionary should be integers. The value of d[i] specifies the fill options for the i-th function in the list. If d[i] == [j]: Fill the area between the i-th and the j-th function in the list. (But if d[i] == j: Fill the area between the i-th function in the list and the horizontal line y = j.)
fillalpha – (default: 0.5) how transparent the fill is; a number between 0 and 1

MATPLOTLIB STYLE SHEET OPTION:

stylesheet – (default: classic) support for loading a full matplotlib style sheet. Any style sheet listed in matplotlib.pyplot.style.available is acceptable. If a non-existing style is provided the default classic is applied.

EXAMPLES:

We plot the $\sin$ function:

Sage

sage: P = plot(sin, (0,10)); print(P)
Graphics object consisting of 1 graphics primitive
sage: len(P)     # number of graphics primitives
1
sage: len(P[0])  # how many points were computed (random)
225
sage: P          # render
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> P = plot(sin, (Integer(0),Integer(10))); print(P)
Graphics object consisting of 1 graphics primitive
>>> len(P)     # number of graphics primitives
1
>>> len(P[Integer(0)])  # how many points were computed (random)
225
>>> P          # render
Graphics object consisting of 1 graphics primitive

Sage Live

P = plot(sin, (0,10)); print(P)
len(P)     # number of graphics primitives
len(P[0])  # how many points were computed (random)
P          # render

Sage

sage: P = plot(sin, (0,10), plot_points=10); print(P)
Graphics object consisting of 1 graphics primitive
sage: len(P[0])  # random output
32
sage: P          # render
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> P = plot(sin, (Integer(0),Integer(10)), plot_points=Integer(10)); print(P)
Graphics object consisting of 1 graphics primitive
>>> len(P[Integer(0)])  # random output
32
>>> P          # render
Graphics object consisting of 1 graphics primitive

Sage Live

P = plot(sin, (0,10), plot_points=10); print(P)
len(P[0])  # random output
P          # render

We plot with randomize=False, which makes the initial sample points evenly spaced (hence always the same). Adaptive plotting might insert other points, however, unless adaptive_recursion=0.

Sage

sage: p = plot(1, (x,0,3), plot_points=4, randomize=False, adaptive_recursion=0)
sage: list(p[0])
[(0.0, 1.0), (1.0, 1.0), (2.0, 1.0), (3.0, 1.0)]

Python

>>> from sage.all import *
>>> p = plot(Integer(1), (x,Integer(0),Integer(3)), plot_points=Integer(4), randomize=False, adaptive_recursion=Integer(0))
>>> list(p[Integer(0)])
[(0.0, 1.0), (1.0, 1.0), (2.0, 1.0), (3.0, 1.0)]

Sage Live

p = plot(1, (x,0,3), plot_points=4, randomize=False, adaptive_recursion=0)
list(p[0])

Some colored functions:

Sage

sage: plot(sin, 0, 10, color='purple')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin, Integer(0), Integer(10), color='purple')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin, 0, 10, color='purple')

Sage

sage: plot(sin, 0, 10, color='#ff00ff')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin, Integer(0), Integer(10), color='#ff00ff')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin, 0, 10, color='#ff00ff')

We plot several functions together by passing a list of functions as input:

Sage

sage: plot([x*exp(-n*x^2)/.4 for n in [1..5]], (0, 2), aspect_ratio=.8)
Graphics object consisting of 5 graphics primitives

Python

>>> from sage.all import *
>>> plot([x*exp(-n*x**Integer(2))/RealNumber('.4') for n in (ellipsis_range(Integer(1),Ellipsis,Integer(5)))], (Integer(0), Integer(2)), aspect_ratio=RealNumber('.8'))
Graphics object consisting of 5 graphics primitives

Sage Live

plot([x*exp(-n*x^2)/.4 for n in [1..5]], (0, 2), aspect_ratio=.8)

By default, color will change from one primitive to the next. This may be controlled by modifying color option:

Sage

sage: g1 = plot([x*exp(-n*x^2)/.4 for n in [1..3]], (0, 2),
....:           color='blue', aspect_ratio=.8); g1
Graphics object consisting of 3 graphics primitives
sage: g2 = plot([x*exp(-n*x^2)/.4 for n in [1..3]], (0, 2),
....:           color=['red','red','green'], linestyle=['-','--','-.'],
....:           aspect_ratio=.8); g2
Graphics object consisting of 3 graphics primitives

Python

>>> from sage.all import *
>>> g1 = plot([x*exp(-n*x**Integer(2))/RealNumber('.4') for n in (ellipsis_range(Integer(1),Ellipsis,Integer(3)))], (Integer(0), Integer(2)),
...           color='blue', aspect_ratio=RealNumber('.8')); g1
Graphics object consisting of 3 graphics primitives
>>> g2 = plot([x*exp(-n*x**Integer(2))/RealNumber('.4') for n in (ellipsis_range(Integer(1),Ellipsis,Integer(3)))], (Integer(0), Integer(2)),
...           color=['red','red','green'], linestyle=['-','--','-.'],
...           aspect_ratio=RealNumber('.8')); g2
Graphics object consisting of 3 graphics primitives

Sage Live

g1 = plot([x*exp(-n*x^2)/.4 for n in [1..3]], (0, 2),
          color='blue', aspect_ratio=.8); g1
g2 = plot([x*exp(-n*x^2)/.4 for n in [1..3]], (0, 2),
          color=['red','red','green'], linestyle=['-','--','-.'],
          aspect_ratio=.8); g2

While plotting real functions, imaginary numbers that are “almost real” will inevitably arise due to numerical issues. By tweaking the imaginary_tolerance, you can decide how large of an imaginary part you’re willing to sweep under the rug in order to plot the corresponding point. If a particular value’s imaginary part has magnitude larger than imaginary_tolerance, that point will not be plotted. The default tolerance is 1e-8, so the imaginary part in the first example below is ignored, but the second example “fails,” emits a warning, and produces an empty graph:

Sage

sage: f = x + I*1e-12
sage: plot(f, x, -1, 1)
Graphics object consisting of 1 graphics primitive
sage: plot(f, x, -1, 1, imaginary_tolerance=0)
...WARNING: ...Unable to compute ...
Graphics object consisting of 0 graphics primitives

Python

>>> from sage.all import *
>>> f = x + I*RealNumber('1e-12')
>>> plot(f, x, -Integer(1), Integer(1))
Graphics object consisting of 1 graphics primitive
>>> plot(f, x, -Integer(1), Integer(1), imaginary_tolerance=Integer(0))
...WARNING: ...Unable to compute ...
Graphics object consisting of 0 graphics primitives

Sage Live

f = x + I*1e-12
plot(f, x, -1, 1)
plot(f, x, -1, 1, imaginary_tolerance=0)

We can also build a plot step by step from an empty plot:

Sage

sage: a = plot([]); a       # passing an empty list returns an empty plot (Graphics() object)
Graphics object consisting of 0 graphics primitives
sage: a += plot(x**2); a    # append another plot
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> a = plot([]); a       # passing an empty list returns an empty plot (Graphics() object)
Graphics object consisting of 0 graphics primitives
>>> a += plot(x**Integer(2)); a    # append another plot
Graphics object consisting of 1 graphics primitive

Sage Live

a = plot([]); a       # passing an empty list returns an empty plot (Graphics() object)
a += plot(x**2); a    # append another plot

Sage

sage: a += plot(x**3); a    # append yet another plot
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> a += plot(x**Integer(3)); a    # append yet another plot
Graphics object consisting of 2 graphics primitives

Sage Live

a += plot(x**3); a    # append yet another plot

The function $\sin(1/x)$ wiggles wildly near $0$. Sage adapts to this and plots extra points near the origin.

Sage

sage: plot(sin(1/x), (x, -1, 1))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(Integer(1)/x), (x, -Integer(1), Integer(1)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(1/x), (x, -1, 1))

Via the matplotlib library, Sage makes it easy to tell whether a graph is on both sides of both axes, as the axes only cross if the origin is actually part of the viewing area:

Sage

sage: plot(x^3, (x,0,2))  # this one has the origin
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(3), (x,Integer(0),Integer(2)))  # this one has the origin
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^3, (x,0,2))  # this one has the origin

Sage

sage: plot(x^3, (x,1,2))  # this one does not
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(3), (x,Integer(1),Integer(2)))  # this one does not
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^3, (x,1,2))  # this one does not

Another thing to be aware of with axis labeling is that when the labels have quite different orders of magnitude or are very large, scientific notation (the $e$ notation for powers of ten) is used:

Sage

sage: plot(x^2, (x,480,500))  # this one has no scientific notation
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(480),Integer(500)))  # this one has no scientific notation
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,480,500))  # this one has no scientific notation

Sage

sage: plot(x^2, (x,300,500))  # this one has scientific notation on y-axis
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(300),Integer(500)))  # this one has scientific notation on y-axis
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x^2, (x,300,500))  # this one has scientific notation on y-axis

You can put a legend with legend_label (the legend is only put once in the case of multiple functions):

Sage

sage: plot(exp(x), 0, 2, legend_label='$e^x$')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(exp(x), Integer(0), Integer(2), legend_label='$e^x$')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(exp(x), 0, 2, legend_label='$e^x$')

Sage understands TeX, so these all are slightly different, and you can choose one based on your needs:

Sage

sage: plot(sin, legend_label='sin')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin, legend_label='sin')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin, legend_label='sin')

Sage

sage: plot(sin, legend_label='$sin$')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin, legend_label='$sin$')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin, legend_label='$sin$')

Sage

sage: plot(sin, legend_label=r'$\sin$')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin, legend_label=r'$\sin$')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin, legend_label=r'$\sin$')

It is possible to use a different color for the text of each label:

Sage

sage: p1 = plot(sin, legend_label='sin', legend_color='red')
sage: p2 = plot(cos, legend_label='cos', legend_color='green')
sage: p1 + p2
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> p1 = plot(sin, legend_label='sin', legend_color='red')
>>> p2 = plot(cos, legend_label='cos', legend_color='green')
>>> p1 + p2
Graphics object consisting of 2 graphics primitives

Sage Live

p1 = plot(sin, legend_label='sin', legend_color='red')
p2 = plot(cos, legend_label='cos', legend_color='green')
p1 + p2

Prior to Issue #19485, legends by default had a shadowless gray background. This behavior can be recovered by setting the legend options on your plot object:

Sage

sage: p = plot(sin(x), legend_label=r'$\sin(x)$')
sage: p.set_legend_options(back_color=(0.9,0.9,0.9), shadow=False)

Python

>>> from sage.all import *
>>> p = plot(sin(x), legend_label=r'$\sin(x)$')
>>> p.set_legend_options(back_color=(RealNumber('0.9'),RealNumber('0.9'),RealNumber('0.9')), shadow=False)

Sage Live

p = plot(sin(x), legend_label=r'$\sin(x)$')
p.set_legend_options(back_color=(0.9,0.9,0.9), shadow=False)

If $X$ is a list of Sage objects and legend_label is ‘automatic’, then Sage will create labels for each function according to their internal representation:

Sage

sage: plot([sin(x), tan(x), 1 - x^2], legend_label='automatic')
Graphics object consisting of 3 graphics primitives

Python

>>> from sage.all import *
>>> plot([sin(x), tan(x), Integer(1) - x**Integer(2)], legend_label='automatic')
Graphics object consisting of 3 graphics primitives

Sage Live

plot([sin(x), tan(x), 1 - x^2], legend_label='automatic')

If legend_label is any single string other than ‘automatic’, then it is repeated for all members of $X$:

Sage

sage: plot([sin(x), tan(x)], color='blue', legend_label='trig')
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> plot([sin(x), tan(x)], color='blue', legend_label='trig')
Graphics object consisting of 2 graphics primitives

Sage Live

plot([sin(x), tan(x)], color='blue', legend_label='trig')

Note that the independent variable may be omitted if there is no ambiguity:

Sage

sage: plot(sin(1.0/x), (-1, 1))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(RealNumber('1.0')/x), (-Integer(1), Integer(1)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(1.0/x), (-1, 1))

Plotting in logarithmic scale is possible for 2D plots. There are two different syntaxes supported:

Sage

sage: plot(exp, (1, 10), scale='semilogy') # log axis on vertical
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(exp, (Integer(1), Integer(10)), scale='semilogy') # log axis on vertical
Graphics object consisting of 1 graphics primitive

Sage Live

plot(exp, (1, 10), scale='semilogy') # log axis on vertical

Sage

sage: plot_semilogy(exp, (1, 10))  # same thing
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_semilogy(exp, (Integer(1), Integer(10)))  # same thing
Graphics object consisting of 1 graphics primitive

Sage Live

plot_semilogy(exp, (1, 10))  # same thing

Sage

sage: plot_loglog(exp, (1, 10))   # both axes are log
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_loglog(exp, (Integer(1), Integer(10)))   # both axes are log
Graphics object consisting of 1 graphics primitive

Sage Live

plot_loglog(exp, (1, 10))   # both axes are log

Sage

sage: plot(exp, (1, 10), scale='loglog', base=2)  # base of log is 2    # long time
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(exp, (Integer(1), Integer(10)), scale='loglog', base=Integer(2))  # base of log is 2    # long time
Graphics object consisting of 1 graphics primitive

Sage Live

plot(exp, (1, 10), scale='loglog', base=2)  # base of log is 2    # long time

We can also change the scale of the axes in the graphics just before displaying:

Sage

sage: G = plot(exp, 1, 10)                                              # long time
sage: G.show(scale=('semilogy', 2))                                     # long time

Python

>>> from sage.all import *
>>> G = plot(exp, Integer(1), Integer(10))                                              # long time
>>> G.show(scale=('semilogy', Integer(2)))                                     # long time

Sage Live

G = plot(exp, 1, 10)                                              # long time
G.show(scale=('semilogy', 2))                                     # long time

The algorithm used to insert extra points is actually pretty simple. On the picture drawn by the lines below:

Sage

sage: p = plot(x^2, (-0.5, 1.4)) + line([(0,0), (1,1)], color='green')
sage: p += line([(0.5, 0.5), (0.5, 0.5^2)], color='purple')
sage: p += point(((0, 0), (0.5, 0.5), (0.5, 0.5^2), (1, 1)),
....:            color='red', pointsize=20)
sage: p += text('A', (-0.05, 0.1), color='red')
sage: p += text('B', (1.01, 1.1), color='red')
sage: p += text('C', (0.48, 0.57), color='red')
sage: p += text('D', (0.53, 0.18), color='red')
sage: p.show(axes=False, xmin=-0.5, xmax=1.4, ymin=0, ymax=2)

Python

>>> from sage.all import *
>>> p = plot(x**Integer(2), (-RealNumber('0.5'), RealNumber('1.4'))) + line([(Integer(0),Integer(0)), (Integer(1),Integer(1))], color='green')
>>> p += line([(RealNumber('0.5'), RealNumber('0.5')), (RealNumber('0.5'), RealNumber('0.5')**Integer(2))], color='purple')
>>> p += point(((Integer(0), Integer(0)), (RealNumber('0.5'), RealNumber('0.5')), (RealNumber('0.5'), RealNumber('0.5')**Integer(2)), (Integer(1), Integer(1))),
...            color='red', pointsize=Integer(20))
>>> p += text('A', (-RealNumber('0.05'), RealNumber('0.1')), color='red')
>>> p += text('B', (RealNumber('1.01'), RealNumber('1.1')), color='red')
>>> p += text('C', (RealNumber('0.48'), RealNumber('0.57')), color='red')
>>> p += text('D', (RealNumber('0.53'), RealNumber('0.18')), color='red')
>>> p.show(axes=False, xmin=-RealNumber('0.5'), xmax=RealNumber('1.4'), ymin=Integer(0), ymax=Integer(2))

Sage Live

p = plot(x^2, (-0.5, 1.4)) + line([(0,0), (1,1)], color='green')
p += line([(0.5, 0.5), (0.5, 0.5^2)], color='purple')
p += point(((0, 0), (0.5, 0.5), (0.5, 0.5^2), (1, 1)),
           color='red', pointsize=20)
p += text('A', (-0.05, 0.1), color='red')
p += text('B', (1.01, 1.1), color='red')
p += text('C', (0.48, 0.57), color='red')
p += text('D', (0.53, 0.18), color='red')
p.show(axes=False, xmin=-0.5, xmax=1.4, ymin=0, ymax=2)

You have the function (in blue) and its approximation (in green) passing through the points A and B. The algorithm finds the midpoint C of AB and computes the distance between C and D. If that distance exceeds the adaptive_tolerance threshold (relative to the size of the initial plot subintervals), the point D is added to the curve. If D is added to the curve, then the algorithm is applied recursively to the points A and D, and D and B. It is repeated adaptive_recursion times (5, by default).

The actual sample points are slightly randomized, so the above plots may look slightly different each time you draw them.

We draw the graph of an elliptic curve as the union of graphs of 2 functions.

Sage

sage: def h1(x): return abs(sqrt(x^3 - 1))
sage: def h2(x): return -abs(sqrt(x^3 - 1))
sage: P = plot([h1, h2], 1,4)
sage: P          # show the result
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> def h1(x): return abs(sqrt(x**Integer(3) - Integer(1)))
>>> def h2(x): return -abs(sqrt(x**Integer(3) - Integer(1)))
>>> P = plot([h1, h2], Integer(1),Integer(4))
>>> P          # show the result
Graphics object consisting of 2 graphics primitives

Sage Live

def h1(x): return abs(sqrt(x^3 - 1))
def h2(x): return -abs(sqrt(x^3 - 1))
P = plot([h1, h2], 1,4)
P          # show the result

It is important to mention that when we draw several graphs at the same time, parameters xmin, xmax, ymin and ymax are just passed directly to the show procedure. In fact, these parameters would be overwritten:

Sage

sage: p=plot(x^3, x, xmin=-1, xmax=1,ymin=-1, ymax=1)
sage: q=plot(exp(x), x, xmin=-2, xmax=2, ymin=0, ymax=4)
sage: (p+q).show()

Python

>>> from sage.all import *
>>> p=plot(x**Integer(3), x, xmin=-Integer(1), xmax=Integer(1),ymin=-Integer(1), ymax=Integer(1))
>>> q=plot(exp(x), x, xmin=-Integer(2), xmax=Integer(2), ymin=Integer(0), ymax=Integer(4))
>>> (p+q).show()

Sage Live

p=plot(x^3, x, xmin=-1, xmax=1,ymin=-1, ymax=1)
q=plot(exp(x), x, xmin=-2, xmax=2, ymin=0, ymax=4)
(p+q).show()

As a workaround, we can perform the trick:

Sage

sage: p1 = line([(a,b) for a, b in zip(p[0].xdata, p[0].ydata)
....:            if b>=-1 and b<=1])
sage: q1 = line([(a,b) for a, b in zip(q[0].xdata, q[0].ydata)
....:            if b>=0 and b<=4])
sage: (p1 + q1).show()

Python

>>> from sage.all import *
>>> p1 = line([(a,b) for a, b in zip(p[Integer(0)].xdata, p[Integer(0)].ydata)
...            if b>=-Integer(1) and b<=Integer(1)])
>>> q1 = line([(a,b) for a, b in zip(q[Integer(0)].xdata, q[Integer(0)].ydata)
...            if b>=Integer(0) and b<=Integer(4)])
>>> (p1 + q1).show()

Sage Live

p1 = line([(a,b) for a, b in zip(p[0].xdata, p[0].ydata)
           if b>=-1 and b<=1])
q1 = line([(a,b) for a, b in zip(q[0].xdata, q[0].ydata)
           if b>=0 and b<=4])
(p1 + q1).show()

We can also directly plot the elliptic curve:

Sage

sage: E = EllipticCurve([0,-1])                                                 # needs sage.schemes
sage: plot(E, (1, 4), color=hue(0.6))                                           # needs sage.schemes
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> E = EllipticCurve([Integer(0),-Integer(1)])                                                 # needs sage.schemes
>>> plot(E, (Integer(1), Integer(4)), color=hue(RealNumber('0.6')))                                           # needs sage.schemes
Graphics object consisting of 1 graphics primitive

Sage Live

E = EllipticCurve([0,-1])                                                 # needs sage.schemes
plot(E, (1, 4), color=hue(0.6))                                           # needs sage.schemes

We can change the line style as well:

Sage

sage: plot(sin(x), (x, 0, 10), linestyle='-.')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x), (x, Integer(0), Integer(10)), linestyle='-.')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x), (x, 0, 10), linestyle='-.')

If we have an empty linestyle and specify a marker, we can see the points that are actually being plotted:

Sage

sage: plot(sin(x), (x,0,10), plot_points=20, linestyle='', marker='.')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x), (x,Integer(0),Integer(10)), plot_points=Integer(20), linestyle='', marker='.')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x), (x,0,10), plot_points=20, linestyle='', marker='.')

The marker can be a TeX symbol as well:

Sage

sage: plot(sin(x), (x, 0, 10), plot_points=20, linestyle='', marker=r'$\checkmark$')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x), (x, Integer(0), Integer(10)), plot_points=Integer(20), linestyle='', marker=r'$\checkmark$')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x), (x, 0, 10), plot_points=20, linestyle='', marker=r'$\checkmark$')

Sage currently ignores points that cannot be evaluated

Sage

sage: from sage.misc.verbose import set_verbose
sage: set_verbose(-1)
sage: plot(-x*log(x), (x, 0, 1))  # this works fine since the failed endpoint is just skipped.
Graphics object consisting of 1 graphics primitive
sage: set_verbose(0)

Python

>>> from sage.all import *
>>> from sage.misc.verbose import set_verbose
>>> set_verbose(-Integer(1))
>>> plot(-x*log(x), (x, Integer(0), Integer(1)))  # this works fine since the failed endpoint is just skipped.
Graphics object consisting of 1 graphics primitive
>>> set_verbose(Integer(0))

Sage Live

from sage.misc.verbose import set_verbose
set_verbose(-1)
plot(-x*log(x), (x, 0, 1))  # this works fine since the failed endpoint is just skipped.
set_verbose(0)

This prints out a warning and plots where it can (we turn off the warning by setting the verbose mode temporarily to -1.)

Sage

sage: set_verbose(-1)
sage: plot(x^(1/3), (x, -1, 1))
Graphics object consisting of 1 graphics primitive
sage: set_verbose(0)

Python

>>> from sage.all import *
>>> set_verbose(-Integer(1))
>>> plot(x**(Integer(1)/Integer(3)), (x, -Integer(1), Integer(1)))
Graphics object consisting of 1 graphics primitive
>>> set_verbose(Integer(0))

Sage Live

set_verbose(-1)
plot(x^(1/3), (x, -1, 1))
set_verbose(0)

Plotting the real cube root function for negative input requires avoiding the complex numbers one would usually get. The easiest way is to use real_nth_root(x, n)

Sage

sage: plot(real_nth_root(x, 3), (x, -1, 1))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(real_nth_root(x, Integer(3)), (x, -Integer(1), Integer(1)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(real_nth_root(x, 3), (x, -1, 1))

We can also get the same plot in the following way:

Sage

sage: plot(sign(x)*abs(x)^(1/3), (x, -1, 1))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sign(x)*abs(x)**(Integer(1)/Integer(3)), (x, -Integer(1), Integer(1)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sign(x)*abs(x)^(1/3), (x, -1, 1))

A way to plot other functions without symbolic variants is to use lambda functions:

Sage

sage: plot(lambda x : RR(x).nth_root(3), (x,-1, 1))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(lambda x : RR(x).nth_root(Integer(3)), (x,-Integer(1), Integer(1)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(lambda x : RR(x).nth_root(3), (x,-1, 1))

We can detect the poles of a function:

Sage

sage: plot(gamma, (-3, 4), detect_poles=True).show(ymin=-5, ymax=5)

Python

>>> from sage.all import *
>>> plot(gamma, (-Integer(3), Integer(4)), detect_poles=True).show(ymin=-Integer(5), ymax=Integer(5))

Sage Live

plot(gamma, (-3, 4), detect_poles=True).show(ymin=-5, ymax=5)

We draw the Gamma-Function with its poles highlighted:

Sage

sage: plot(gamma, (-3, 4), detect_poles='show').show(ymin=-5, ymax=5)

Python

>>> from sage.all import *
>>> plot(gamma, (-Integer(3), Integer(4)), detect_poles='show').show(ymin=-Integer(5), ymax=Integer(5))

Sage Live

plot(gamma, (-3, 4), detect_poles='show').show(ymin=-5, ymax=5)

The basic options for filling a plot:

Sage

sage: p1 = plot(sin(x), -pi, pi, fill='axis')
sage: p2 = plot(sin(x), -pi, pi, fill='min', fillalpha=1)
sage: p3 = plot(sin(x), -pi, pi, fill='max')
sage: p4 = plot(sin(x), -pi, pi, fill=(1-x)/3,
....:           fillcolor='blue', fillalpha=.2)
sage: graphics_array([[p1, p2],                                             # long time
....:                 [p3, p4]]).show(frame=True, axes=False)

Python

>>> from sage.all import *
>>> p1 = plot(sin(x), -pi, pi, fill='axis')
>>> p2 = plot(sin(x), -pi, pi, fill='min', fillalpha=Integer(1))
>>> p3 = plot(sin(x), -pi, pi, fill='max')
>>> p4 = plot(sin(x), -pi, pi, fill=(Integer(1)-x)/Integer(3),
...           fillcolor='blue', fillalpha=RealNumber('.2'))
>>> graphics_array([[p1, p2],                                             # long time
...                 [p3, p4]]).show(frame=True, axes=False)

Sage Live

p1 = plot(sin(x), -pi, pi, fill='axis')
p2 = plot(sin(x), -pi, pi, fill='min', fillalpha=1)
p3 = plot(sin(x), -pi, pi, fill='max')
p4 = plot(sin(x), -pi, pi, fill=(1-x)/3,
          fillcolor='blue', fillalpha=.2)
graphics_array([[p1, p2],                                             # long time
                [p3, p4]]).show(frame=True, axes=False)

The basic options for filling a list of plots:

Sage

sage: (f1, f2) = x*exp(-1*x^2)/.35, x*exp(-2*x^2)/.35
sage: p1 = plot([f1, f2], -pi, pi, fill={1: [0]},
....:           fillcolor='blue', fillalpha=.25, color='blue')
sage: p2 = plot([f1, f2], -pi, pi, fill={0: x/3, 1:[0]}, color=['blue'])
sage: p3 = plot([f1, f2], -pi, pi, fill=[0, [0]],
....:           fillcolor=['orange','red'], fillalpha=1, color={1: 'blue'})
sage: p4 = plot([f1, f2], (x,-pi, pi), fill=[x/3, 0],
....:           fillcolor=['grey'], color=['red', 'blue'])
sage: graphics_array([[p1, p2],                                             # long time
....:                 [p3, p4]]).show(frame=True, axes=False)

Python

>>> from sage.all import *
>>> (f1, f2) = x*exp(-Integer(1)*x**Integer(2))/RealNumber('.35'), x*exp(-Integer(2)*x**Integer(2))/RealNumber('.35')
>>> p1 = plot([f1, f2], -pi, pi, fill={Integer(1): [Integer(0)]},
...           fillcolor='blue', fillalpha=RealNumber('.25'), color='blue')
>>> p2 = plot([f1, f2], -pi, pi, fill={Integer(0): x/Integer(3), Integer(1):[Integer(0)]}, color=['blue'])
>>> p3 = plot([f1, f2], -pi, pi, fill=[Integer(0), [Integer(0)]],
...           fillcolor=['orange','red'], fillalpha=Integer(1), color={Integer(1): 'blue'})
>>> p4 = plot([f1, f2], (x,-pi, pi), fill=[x/Integer(3), Integer(0)],
...           fillcolor=['grey'], color=['red', 'blue'])
>>> graphics_array([[p1, p2],                                             # long time
...                 [p3, p4]]).show(frame=True, axes=False)

Sage Live

(f1, f2) = x*exp(-1*x^2)/.35, x*exp(-2*x^2)/.35
p1 = plot([f1, f2], -pi, pi, fill={1: [0]},
          fillcolor='blue', fillalpha=.25, color='blue')
p2 = plot([f1, f2], -pi, pi, fill={0: x/3, 1:[0]}, color=['blue'])
p3 = plot([f1, f2], -pi, pi, fill=[0, [0]],
          fillcolor=['orange','red'], fillalpha=1, color={1: 'blue'})
p4 = plot([f1, f2], (x,-pi, pi), fill=[x/3, 0],
          fillcolor=['grey'], color=['red', 'blue'])
graphics_array([[p1, p2],                                             # long time
                [p3, p4]]).show(frame=True, axes=False)

A example about the growth of prime numbers:

Sage

sage: plot(1.13*log(x), 1, 100,
....:      fill=lambda x: nth_prime(x)/floor(x), fillcolor='red')
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> plot(RealNumber('1.13')*log(x), Integer(1), Integer(100),
...      fill=lambda x: nth_prime(x)/floor(x), fillcolor='red')
Graphics object consisting of 2 graphics primitives

Sage Live

plot(1.13*log(x), 1, 100,
     fill=lambda x: nth_prime(x)/floor(x), fillcolor='red')

Fill the area between a function and its asymptote:

Sage

sage: f = (2*x^3+2*x-1)/((x-2)*(x+1))
sage: plot([f, 2*x+2], -7, 7, fill={0: [1]}, fillcolor='#ccc').show(ymin=-20, ymax=20)

Python

>>> from sage.all import *
>>> f = (Integer(2)*x**Integer(3)+Integer(2)*x-Integer(1))/((x-Integer(2))*(x+Integer(1)))
>>> plot([f, Integer(2)*x+Integer(2)], -Integer(7), Integer(7), fill={Integer(0): [Integer(1)]}, fillcolor='#ccc').show(ymin=-Integer(20), ymax=Integer(20))

Sage Live

f = (2*x^3+2*x-1)/((x-2)*(x+1))
plot([f, 2*x+2], -7, 7, fill={0: [1]}, fillcolor='#ccc').show(ymin=-20, ymax=20)

Fill the area between a list of functions and the x-axis:

Sage

sage: def b(n): return lambda x: bessel_J(n, x)
sage: plot([b(n) for n in [1..5]], 0, 20, fill='axis')
Graphics object consisting of 10 graphics primitives

Python

>>> from sage.all import *
>>> def b(n): return lambda x: bessel_J(n, x)
>>> plot([b(n) for n in (ellipsis_range(Integer(1),Ellipsis,Integer(5)))], Integer(0), Integer(20), fill='axis')
Graphics object consisting of 10 graphics primitives

Sage Live

def b(n): return lambda x: bessel_J(n, x)
plot([b(n) for n in [1..5]], 0, 20, fill='axis')

Note that to fill between the ith and jth functions, you must use the dictionary key-value syntax i:[j]; using key-value pairs like i:j will fill between the ith function and the line y=j:

Sage

sage: def b(n): return lambda x: bessel_J(n, x) + 0.5*(n-1)
sage: plot([b(c) for c in [1..5]], 0, 20, fill={i: [i-1] for i in [1..4]},
....:      color={i: 'blue' for i in [1..5]}, aspect_ratio=3, ymax=3)
Graphics object consisting of 9 graphics primitives
sage: plot([b(c) for c in [1..5]], 0, 20, fill={i: i-1 for i in [1..4]},        # long time
....:      color='blue', aspect_ratio=3)
Graphics object consisting of 9 graphics primitives

Python

>>> from sage.all import *
>>> def b(n): return lambda x: bessel_J(n, x) + RealNumber('0.5')*(n-Integer(1))
>>> plot([b(c) for c in (ellipsis_range(Integer(1),Ellipsis,Integer(5)))], Integer(0), Integer(20), fill={i: [i-Integer(1)] for i in (ellipsis_range(Integer(1),Ellipsis,Integer(4)))},
...      color={i: 'blue' for i in (ellipsis_range(Integer(1),Ellipsis,Integer(5)))}, aspect_ratio=Integer(3), ymax=Integer(3))
Graphics object consisting of 9 graphics primitives
>>> plot([b(c) for c in (ellipsis_range(Integer(1),Ellipsis,Integer(5)))], Integer(0), Integer(20), fill={i: i-Integer(1) for i in (ellipsis_range(Integer(1),Ellipsis,Integer(4)))},        # long time
...      color='blue', aspect_ratio=Integer(3))
Graphics object consisting of 9 graphics primitives

Sage Live

def b(n): return lambda x: bessel_J(n, x) + 0.5*(n-1)
plot([b(c) for c in [1..5]], 0, 20, fill={i: [i-1] for i in [1..4]},
     color={i: 'blue' for i in [1..5]}, aspect_ratio=3, ymax=3)
plot([b(c) for c in [1..5]], 0, 20, fill={i: i-1 for i in [1..4]},        # long time
     color='blue', aspect_ratio=3)

Extra options will get passed on to show(), as long as they are valid:

Sage

sage: plot(sin(x^2), (x, -3, 3),  # These labels will be nicely typeset
....:      title=r'Plot of $\sin(x^2)$', axes_labels=['$x$','$y$'])
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x**Integer(2)), (x, -Integer(3), Integer(3)),  # These labels will be nicely typeset
...      title=r'Plot of $\sin(x^2)$', axes_labels=['$x$','$y$'])
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x^2), (x, -3, 3),  # These labels will be nicely typeset
     title=r'Plot of $\sin(x^2)$', axes_labels=['$x$','$y$'])

Sage

sage: plot(sin(x^2), (x, -3, 3),  # These will not
....:      title='Plot of sin(x^2)', axes_labels=['x','y'])
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x**Integer(2)), (x, -Integer(3), Integer(3)),  # These will not
...      title='Plot of sin(x^2)', axes_labels=['x','y'])
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x^2), (x, -3, 3),  # These will not
     title='Plot of sin(x^2)', axes_labels=['x','y'])

Sage

sage: plot(sin(x^2), (x, -3, 3),  # Large axes labels (w.r.t. the tick marks)
....:      axes_labels=['x','y'], axes_labels_size=2.5)
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x**Integer(2)), (x, -Integer(3), Integer(3)),  # Large axes labels (w.r.t. the tick marks)
...      axes_labels=['x','y'], axes_labels_size=RealNumber('2.5'))
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x^2), (x, -3, 3),  # Large axes labels (w.r.t. the tick marks)
     axes_labels=['x','y'], axes_labels_size=2.5)

Sage

sage: plot(sin(x^2), (x, -3, 3), figsize=[8,2])
Graphics object consisting of 1 graphics primitive
sage: plot(sin(x^2), (x, -3, 3)).show(figsize=[8,2])  # These are equivalent

Python

>>> from sage.all import *
>>> plot(sin(x**Integer(2)), (x, -Integer(3), Integer(3)), figsize=[Integer(8),Integer(2)])
Graphics object consisting of 1 graphics primitive
>>> plot(sin(x**Integer(2)), (x, -Integer(3), Integer(3))).show(figsize=[Integer(8),Integer(2)])  # These are equivalent

Sage Live

plot(sin(x^2), (x, -3, 3), figsize=[8,2])
plot(sin(x^2), (x, -3, 3)).show(figsize=[8,2])  # These are equivalent

This includes options for custom ticks and formatting. See documentation for show() for more details.

Sage

sage: plot(sin(pi*x), (x, -8, 8), ticks=[[-7,-3,0,3,7], [-1/2,0,1/2]])
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(pi*x), (x, -Integer(8), Integer(8)), ticks=[[-Integer(7),-Integer(3),Integer(0),Integer(3),Integer(7)], [-Integer(1)/Integer(2),Integer(0),Integer(1)/Integer(2)]])
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(pi*x), (x, -8, 8), ticks=[[-7,-3,0,3,7], [-1/2,0,1/2]])

Sage

sage: plot(2*x + 1, (x, 0, 5),
....:      ticks=[[0, 1, e, pi, sqrt(20)],
....:             [1, 3, 2*e + 1, 2*pi + 1, 2*sqrt(20) + 1]],
....:      tick_formatter='latex')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(Integer(2)*x + Integer(1), (x, Integer(0), Integer(5)),
...      ticks=[[Integer(0), Integer(1), e, pi, sqrt(Integer(20))],
...             [Integer(1), Integer(3), Integer(2)*e + Integer(1), Integer(2)*pi + Integer(1), Integer(2)*sqrt(Integer(20)) + Integer(1)]],
...      tick_formatter='latex')
Graphics object consisting of 1 graphics primitive

Sage Live

plot(2*x + 1, (x, 0, 5),
     ticks=[[0, 1, e, pi, sqrt(20)],
            [1, 3, 2*e + 1, 2*pi + 1, 2*sqrt(20) + 1]],
     tick_formatter='latex')

This is particularly useful when setting custom ticks in multiples of $\pi$.

Sage

sage: plot(sin(x), (x,0,2*pi), ticks=pi/3, tick_formatter=pi)
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(sin(x), (x,Integer(0),Integer(2)*pi), ticks=pi/Integer(3), tick_formatter=pi)
Graphics object consisting of 1 graphics primitive

Sage Live

plot(sin(x), (x,0,2*pi), ticks=pi/3, tick_formatter=pi)

You can even have custom tick labels along with custom positioning.

Sage

sage: plot(x**2, (x,0,3), ticks=[[1,2.5], [0.5,1,2]],
....:      tick_formatter=[["$x_1$","$x_2$"],["$y_1$","$y_2$","$y_3$"]])
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x**Integer(2), (x,Integer(0),Integer(3)), ticks=[[Integer(1),RealNumber('2.5')], [RealNumber('0.5'),Integer(1),Integer(2)]],
...      tick_formatter=[["$x_1$","$x_2$"],["$y_1$","$y_2$","$y_3$"]])
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x**2, (x,0,3), ticks=[[1,2.5], [0.5,1,2]],
     tick_formatter=[["$x_1$","$x_2$"],["$y_1$","$y_2$","$y_3$"]])

You can force Type 1 fonts in your figures by providing the relevant option as shown below. This also requires that LaTeX, dvipng and Ghostscript be installed:

Sage

sage: plot(x, typeset='type1')                          # optional - latex
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot(x, typeset='type1')                          # optional - latex
Graphics object consisting of 1 graphics primitive

Sage Live

plot(x, typeset='type1')                          # optional - latex

A example with excluded values:

Sage

sage: plot(floor(x), (x, 1, 10), exclude=[1..10])
Graphics object consisting of 11 graphics primitives

Python

>>> from sage.all import *
>>> plot(floor(x), (x, Integer(1), Integer(10)), exclude=(ellipsis_range(Integer(1),Ellipsis,Integer(10))))
Graphics object consisting of 11 graphics primitives

Sage Live

plot(floor(x), (x, 1, 10), exclude=[1..10])

We exclude all points where PrimePi makes a jump:

Sage

sage: jumps = [n for n in [1..100] if prime_pi(n) != prime_pi(n-1)]
sage: plot(lambda x: prime_pi(x), (x, 1, 100), exclude=jumps)
Graphics object consisting of 26 graphics primitives

Python

>>> from sage.all import *
>>> jumps = [n for n in (ellipsis_range(Integer(1),Ellipsis,Integer(100))) if prime_pi(n) != prime_pi(n-Integer(1))]
>>> plot(lambda x: prime_pi(x), (x, Integer(1), Integer(100)), exclude=jumps)
Graphics object consisting of 26 graphics primitives

Sage Live

jumps = [n for n in [1..100] if prime_pi(n) != prime_pi(n-1)]
plot(lambda x: prime_pi(x), (x, 1, 100), exclude=jumps)

Excluded points can also be given by an equation:

Sage

sage: g(x) = x^2 - 2*x - 2
sage: plot(1/g(x), (x, -3, 4), exclude=g(x)==0, ymin=-5, ymax=5)    # long time
Graphics object consisting of 3 graphics primitives

Python

>>> from sage.all import *
>>> __tmp__=var("x"); g = symbolic_expression(x**Integer(2) - Integer(2)*x - Integer(2)).function(x)
>>> plot(Integer(1)/g(x), (x, -Integer(3), Integer(4)), exclude=g(x)==Integer(0), ymin=-Integer(5), ymax=Integer(5))    # long time
Graphics object consisting of 3 graphics primitives

Sage Live

g(x) = x^2 - 2*x - 2
plot(1/g(x), (x, -3, 4), exclude=g(x)==0, ymin=-5, ymax=5)    # long time

exclude and detect_poles can be used together:

Sage

sage: f(x) = (floor(x)+0.5) / (1-(x-0.5)^2)
sage: plot(f, (x, -3.5, 3.5), detect_poles='show', exclude=[-3..3],
....:      ymin=-5, ymax=5)
Graphics object consisting of 12 graphics primitives

Python

>>> from sage.all import *
>>> __tmp__=var("x"); f = symbolic_expression((floor(x)+RealNumber('0.5')) / (Integer(1)-(x-RealNumber('0.5'))**Integer(2))).function(x)
>>> plot(f, (x, -RealNumber('3.5'), RealNumber('3.5')), detect_poles='show', exclude=(ellipsis_range(-Integer(3),Ellipsis,Integer(3))),
...      ymin=-Integer(5), ymax=Integer(5))
Graphics object consisting of 12 graphics primitives

Sage Live

f(x) = (floor(x)+0.5) / (1-(x-0.5)^2)
plot(f, (x, -3.5, 3.5), detect_poles='show', exclude=[-3..3],
     ymin=-5, ymax=5)

Regions in which the plot has no values are automatically excluded. The regions thus excluded are in addition to the exclusion points present in the exclude keyword argument.:

Sage

sage: set_verbose(-1)
sage: plot(arcsec, (x, -2, 2))  # [-1, 1] is excluded automatically
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> set_verbose(-Integer(1))
>>> plot(arcsec, (x, -Integer(2), Integer(2)))  # [-1, 1] is excluded automatically
Graphics object consisting of 2 graphics primitives

Sage Live

set_verbose(-1)
plot(arcsec, (x, -2, 2))  # [-1, 1] is excluded automatically

Sage

sage: plot(arcsec, (x, -2, 2), exclude=[1.5])  # x=1.5 is also excluded
Graphics object consisting of 3 graphics primitives

Python

>>> from sage.all import *
>>> plot(arcsec, (x, -Integer(2), Integer(2)), exclude=[RealNumber('1.5')])  # x=1.5 is also excluded
Graphics object consisting of 3 graphics primitives

Sage Live

plot(arcsec, (x, -2, 2), exclude=[1.5])  # x=1.5 is also excluded

Sage

sage: plot(arcsec(x/2), -2, 2)  # plot should be empty; no valid points
Graphics object consisting of 0 graphics primitives
sage: plot(sqrt(x^2 - 1), -2, 2)  # [-1, 1] is excluded automatically
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> plot(arcsec(x/Integer(2)), -Integer(2), Integer(2))  # plot should be empty; no valid points
Graphics object consisting of 0 graphics primitives
>>> plot(sqrt(x**Integer(2) - Integer(1)), -Integer(2), Integer(2))  # [-1, 1] is excluded automatically
Graphics object consisting of 2 graphics primitives

Sage Live

plot(arcsec(x/2), -2, 2)  # plot should be empty; no valid points
plot(sqrt(x^2 - 1), -2, 2)  # [-1, 1] is excluded automatically

Sage

sage: plot(arccsc, -2, 2)       # [-1, 1] is excluded automatically
Graphics object consisting of 2 graphics primitives
sage: set_verbose(0)

Python

>>> from sage.all import *
>>> plot(arccsc, -Integer(2), Integer(2))       # [-1, 1] is excluded automatically
Graphics object consisting of 2 graphics primitives
>>> set_verbose(Integer(0))

Sage Live

plot(arccsc, -2, 2)       # [-1, 1] is excluded automatically
set_verbose(0)

sage.plot.plot.plot_loglog(funcs, base=10, *args, **kwds)[source]¶

Plot graphics in ‘loglog’ scale, that is, both the horizontal and the vertical axes will be in logarithmic scale.

INPUT:

base – (default: $10$) the base of the logarithm; this must be greater than 1. The base can be also given as a list or tuple (basex, basey). basex sets the base of the logarithm along the horizontal axis and basey sets the base along the vertical axis.
funcs – any Sage object which is acceptable to the plot()

For all other inputs, look at the documentation of plot().

EXAMPLES:

Sage

sage: plot_loglog(exp, (1,10))  # plot in loglog scale with base 10
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_loglog(exp, (Integer(1),Integer(10)))  # plot in loglog scale with base 10
Graphics object consisting of 1 graphics primitive

Sage Live

plot_loglog(exp, (1,10))  # plot in loglog scale with base 10

Sage

sage: plot_loglog(exp, (1,10), base=2.1)  # with base 2.1 on both axes  # long time
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_loglog(exp, (Integer(1),Integer(10)), base=RealNumber('2.1'))  # with base 2.1 on both axes  # long time
Graphics object consisting of 1 graphics primitive

Sage Live

plot_loglog(exp, (1,10), base=2.1)  # with base 2.1 on both axes  # long time

Sage

sage: plot_loglog(exp, (1,10), base=(2,3))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_loglog(exp, (Integer(1),Integer(10)), base=(Integer(2),Integer(3)))
Graphics object consisting of 1 graphics primitive

Sage Live

plot_loglog(exp, (1,10), base=(2,3))

sage.plot.plot.plot_semilogx(funcs, base=10, *args, **kwds)[source]¶

Plot graphics in ‘semilogx’ scale, that is, the horizontal axis will be in logarithmic scale.

INPUT:

base – (default: $10$) the base of the logarithm; this must be greater than 1
funcs – any Sage object which is acceptable to the plot()

For all other inputs, look at the documentation of plot().

EXAMPLES:

Sage

sage: plot_semilogx(exp, (1,10))  # plot in semilogx scale, base 10     # long time
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_semilogx(exp, (Integer(1),Integer(10)))  # plot in semilogx scale, base 10     # long time
Graphics object consisting of 1 graphics primitive

Sage Live

plot_semilogx(exp, (1,10))  # plot in semilogx scale, base 10     # long time

Sage

sage: plot_semilogx(exp, (1,10), base=2)  # with base 2
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_semilogx(exp, (Integer(1),Integer(10)), base=Integer(2))  # with base 2
Graphics object consisting of 1 graphics primitive

Sage Live

plot_semilogx(exp, (1,10), base=2)  # with base 2

Sage

sage: s = var('s')  # Samples points logarithmically so graph is smooth
sage: f = 4000000/(4000000 + 4000*s*i - s*s)
sage: plot_semilogx(20*log(abs(f), 10), (s, 1, 1e6))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> s = var('s')  # Samples points logarithmically so graph is smooth
>>> f = Integer(4000000)/(Integer(4000000) + Integer(4000)*s*i - s*s)
>>> plot_semilogx(Integer(20)*log(abs(f), Integer(10)), (s, Integer(1), RealNumber('1e6')))
Graphics object consisting of 1 graphics primitive

Sage Live

s = var('s')  # Samples points logarithmically so graph is smooth
f = 4000000/(4000000 + 4000*s*i - s*s)
plot_semilogx(20*log(abs(f), 10), (s, 1, 1e6))

sage.plot.plot.plot_semilogy(funcs, base=10, *args, **kwds)[source]¶

Plot graphics in ‘semilogy’ scale, that is, the vertical axis will be in logarithmic scale.

INPUT:

base – (default: $10$) the base of the logarithm; this must be greater than 1
funcs – any Sage object which is acceptable to the plot()

For all other inputs, look at the documentation of plot().

EXAMPLES:

Sage

sage: plot_semilogy(exp, (1, 10))  # long time # plot in semilogy scale, base 10
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_semilogy(exp, (Integer(1), Integer(10)))  # long time # plot in semilogy scale, base 10
Graphics object consisting of 1 graphics primitive

Sage Live

plot_semilogy(exp, (1, 10))  # long time # plot in semilogy scale, base 10

Sage

sage: plot_semilogy(exp, (1, 10), base=2)  # long time # with base 2
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> plot_semilogy(exp, (Integer(1), Integer(10)), base=Integer(2))  # long time # with base 2
Graphics object consisting of 1 graphics primitive

Sage Live

plot_semilogy(exp, (1, 10), base=2)  # long time # with base 2

sage.plot.plot.polar_plot(funcs, aspect_ratio=1.0, *args, **kwds)[source]¶

polar_plot takes a single function or a list or tuple of functions and plots them with polar coordinates in the given domain.

This function is equivalent to the plot() command with the options polar=True and aspect_ratio=1. For more help on options, see the documentation for plot().

INPUT:

funcs – a function
other options are passed to plot

EXAMPLES:

Here is a blue 8-leaved petal:

Sage

sage: polar_plot(sin(5*x)^2, (x, 0, 2*pi), color='blue')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> polar_plot(sin(Integer(5)*x)**Integer(2), (x, Integer(0), Integer(2)*pi), color='blue')
Graphics object consisting of 1 graphics primitive

Sage Live

polar_plot(sin(5*x)^2, (x, 0, 2*pi), color='blue')

A red figure-8:

Sage

sage: polar_plot(abs(sqrt(1 - sin(x)^2)), (x, 0, 2*pi), color='red')
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> polar_plot(abs(sqrt(Integer(1) - sin(x)**Integer(2))), (x, Integer(0), Integer(2)*pi), color='red')
Graphics object consisting of 1 graphics primitive

Sage Live

polar_plot(abs(sqrt(1 - sin(x)^2)), (x, 0, 2*pi), color='red')

A green limacon of Pascal:

Sage

sage: polar_plot(2 + 2*cos(x), (x, 0, 2*pi), color=hue(0.3))
Graphics object consisting of 1 graphics primitive

Python

>>> from sage.all import *
>>> polar_plot(Integer(2) + Integer(2)*cos(x), (x, Integer(0), Integer(2)*pi), color=hue(RealNumber('0.3')))
Graphics object consisting of 1 graphics primitive

Sage Live

polar_plot(2 + 2*cos(x), (x, 0, 2*pi), color=hue(0.3))

Several polar plots:

Sage

sage: polar_plot([2*sin(x), 2*cos(x)], (x, 0, 2*pi))
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> polar_plot([Integer(2)*sin(x), Integer(2)*cos(x)], (x, Integer(0), Integer(2)*pi))
Graphics object consisting of 2 graphics primitives

Sage Live

polar_plot([2*sin(x), 2*cos(x)], (x, 0, 2*pi))

A filled spiral:

Sage

sage: polar_plot(sqrt, 0, 2 * pi, fill=True)
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> polar_plot(sqrt, Integer(0), Integer(2) * pi, fill=True)
Graphics object consisting of 2 graphics primitives

Sage Live

polar_plot(sqrt, 0, 2 * pi, fill=True)

Fill the area between two functions:

Sage

sage: polar_plot(cos(4*x) + 1.5, 0, 2*pi, fill=0.5 * cos(4*x) + 2.5,
....:            fillcolor='orange')
Graphics object consisting of 2 graphics primitives

Python

>>> from sage.all import *
>>> polar_plot(cos(Integer(4)*x) + RealNumber('1.5'), Integer(0), Integer(2)*pi, fill=RealNumber('0.5') * cos(Integer(4)*x) + RealNumber('2.5'),
...            fillcolor='orange')
Graphics object consisting of 2 graphics primitives

Sage Live

polar_plot(cos(4*x) + 1.5, 0, 2*pi, fill=0.5 * cos(4*x) + 2.5,
           fillcolor='orange')

Fill the area between several spirals:

Sage

sage: polar_plot([(1.2+k*0.2)*log(x) for k in range(6)], 1, 3 * pi,
....:            fill={0: [1], 2: [3], 4: [5]})
Graphics object consisting of 9 graphics primitives

Python

>>> from sage.all import *
>>> polar_plot([(RealNumber('1.2')+k*RealNumber('0.2'))*log(x) for k in range(Integer(6))], Integer(1), Integer(3) * pi,
...            fill={Integer(0): [Integer(1)], Integer(2): [Integer(3)], Integer(4): [Integer(5)]})
Graphics object consisting of 9 graphics primitives

Sage Live

polar_plot([(1.2+k*0.2)*log(x) for k in range(6)], 1, 3 * pi,
           fill={0: [1], 2: [3], 4: [5]})

Exclude points at discontinuities:

Sage

sage: polar_plot(log(floor(x)), (x, 1, 4*pi), exclude=[1..12])
Graphics object consisting of 12 graphics primitives

Python

>>> from sage.all import *
>>> polar_plot(log(floor(x)), (x, Integer(1), Integer(4)*pi), exclude=(ellipsis_range(Integer(1),Ellipsis,Integer(12))))
Graphics object consisting of 12 graphics primitives

Sage Live

polar_plot(log(floor(x)), (x, 1, 4*pi), exclude=[1..12])

sage.plot.plot.reshape(v, n, m)[source]¶

Helper function for creating graphics arrays.

The input array is flattened and turned into an $n imes m$ array, with blank graphics object padded at the end, if necessary.

INPUT:

v – list of lists or tuples
n, m – integers

OUTPUT: list of lists of graphics objects

EXAMPLES:

Sage

sage: L = [plot(sin(k*x), (x,-pi,pi)) for k in range(10)]
sage: graphics_array(L,3,4)  # long time (up to 4s on sage.math, 2012)
Graphics Array of size 3 x 4

Python

>>> from sage.all import *
>>> L = [plot(sin(k*x), (x,-pi,pi)) for k in range(Integer(10))]
>>> graphics_array(L,Integer(3),Integer(4))  # long time (up to 4s on sage.math, 2012)
Graphics Array of size 3 x 4

Sage Live

L = [plot(sin(k*x), (x,-pi,pi)) for k in range(10)]
graphics_array(L,3,4)  # long time (up to 4s on sage.math, 2012)

Sage

sage: M = [[plot(sin(k*x), (x,-pi,pi)) for k in range(3)],
....:      [plot(cos(j*x), (x,-pi,pi)) for j in [3..5]]]
sage: graphics_array(M,6,1)  # long time (up to 4s on sage.math, 2012)
Graphics Array of size 6 x 1

Python

>>> from sage.all import *
>>> M = [[plot(sin(k*x), (x,-pi,pi)) for k in range(Integer(3))],
...      [plot(cos(j*x), (x,-pi,pi)) for j in (ellipsis_range(Integer(3),Ellipsis,Integer(5)))]]
>>> graphics_array(M,Integer(6),Integer(1))  # long time (up to 4s on sage.math, 2012)
Graphics Array of size 6 x 1

Sage Live

M = [[plot(sin(k*x), (x,-pi,pi)) for k in range(3)],
     [plot(cos(j*x), (x,-pi,pi)) for j in [3..5]]]
graphics_array(M,6,1)  # long time (up to 4s on sage.math, 2012)

Python

>>> from sage.all import *
>>> M = [[plot(sin(k*x), (x,-pi,pi)) for k in range(Integer(3))],
...      [plot(cos(j*x), (x,-pi,pi)) for j in (ellipsis_range(Integer(3),Ellipsis,Integer(5)))]]
>>> graphics_array(M,Integer(6),Integer(1))  # long time (up to 4s on sage.math, 2012)
Graphics Array of size 6 x 1

Sage Live

M = [[plot(sin(k*x), (x,-pi,pi)) for k in range(3)],
     [plot(cos(j*x), (x,-pi,pi)) for j in [3..5]]]
graphics_array(M,6,1)  # long time (up to 4s on sage.math, 2012)

sage.plot.plot.to_float_list(v)[source]¶

Given a list or tuple or iterable v, coerce each element of v to a float and make a list out of the result.

EXAMPLES:

Sage

sage: from sage.plot.plot import to_float_list
sage: to_float_list([1,1/2,3])
[1.0, 0.5, 3.0]

Python

>>> from sage.all import *
>>> from sage.plot.plot import to_float_list
>>> to_float_list([Integer(1),Integer(1)/Integer(2),Integer(3)])
[1.0, 0.5, 3.0]

Sage Live

from sage.plot.plot import to_float_list
to_float_list([1,1/2,3])

sage.plot.plot.xydata_from_point_list(points)[source]¶

Return two lists (xdata, ydata), each coerced to a list of floats, which correspond to the x-coordinates and the y-coordinates of the points.

The points parameter can be a list of 2-tuples or some object that yields a list of one or two numbers.

This function can potentially be very slow for large point sets.